summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-01net/mlx5: Fix incorrect page count when in internal errorDaniel Jurgens
Change page cleanup flow when in internal error to properly decrement the page counts when reclaiming pages. The prevents timing out waiting for extra pages that were actually cleaned up previously. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Avoid calling sleeping function by the health poll threadMohamad Haj Yahia
In internal error state the health poll thread will eventually call synchronize_irq() (to safely trigger command completions) which might sleep, so we are calling sleeping function from atomic context which is invalid. Here we move trigger_cmd_completions(dev) to enter error state which is the earliest stage in error state handling. This way we won't need to wait for next health poll to trigger command completions and will solve the scheduling while atomic issue. mlx5_enter_error_state can be called from two contexts, protect it with dev->intf_state_lock Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix teardown errors that happen in pci error handlerMohamad Haj Yahia
In case of internal error state we will simulate the commands status through the return value translation function, but we need to simulate all the teardown fw commands as successful so we will not have fw command failure prints. This also fix memory leaks that happen because we skip teardown stages due to failed fw commands. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01bonding: prevent out of bound accessesEric Dumazet
ether_addr_equal_64bits() requires some care about its arguments, namely that 8 bytes might be read, even if last 2 byte values are not used. KASan detected a violation with null_mac_addr and lacpdu_mcast_addr in bond_3ad.c Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c : Although the 8-byte alignment was there, KASan would detect out of bound accesses. Fixes: 815117adaf5b ("bonding: use ether_addr_equal_unaligned for bond addr compare") Fixes: bb54e58929f3 ("bonding: Verify RX LACPDU has proper dest mac-addr") Fixes: 885a136c52a8 ("bonding: use compare_ether_addr_64bits() in ALB") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01ASoC: rt5645: fix reg-2f default value.Bard Liao
The default value of reg-2f in codec rt5650 is 0x5002, not 0x1002. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-01net: mvneta: fix open() error cleanupRussell King - ARM Linux
If mvneta_mdio_probe() fails, a kernel warning is triggered due to missing cleanup in the error path. Add the necessary cleanup. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 281 at kernel/irq/manage.c:1814 __free_percpu_irq+0xfc/0x130 percpu IRQ 38 still enabled on CPU0! Modules linked in: bnep bluetooth xhci_plat_hcd xhci_hcd marvell_cesa armada_thermal des_generic ehci_orion mcp3021 spi_orion sfp mdio_i2c evbug fuse CPU: 1 PID: 281 Comm: connmand Not tainted 4.7.0-rc2+ #53 Hardware name: Marvell Armada 380/385 (Device Tree) Backtrace: [<c0013488>] (dump_backtrace) from [<c00137d0>] (show_stack+0x18/0x1c) r6:60010093 r5:ffffffff r4:00000000 r3:dc8ba500 [<c00137b8>] (show_stack) from [<c02c6fe0>] (dump_stack+0xa4/0xdc) [<c02c6f3c>] (dump_stack) from [<c002d4ec>] (__warn+0xd8/0x104) r6:c081e6a0 r5:00000000 r4:edfe5d50 r3:dc8ba500 [<c002d414>] (__warn) from [<c002d5d0>] (warn_slowpath_fmt+0x40/0x48) r10:a0010013 r8:c09356f8 r7:00000026 r6:ef11a260 r5:edd7b980 r4:ef11a200 [<c002d594>] (warn_slowpath_fmt) from [<c008c8e0>] (__free_percpu_irq+0xfc/0x130) r3:00000026 r2:c081e7ac [<c008c7e4>] (__free_percpu_irq) from [<c008c95c>] (free_percpu_irq+0x48/0x74) r10:00008914 r8:00000000 r7:ffffffed r6:c09356f8 r5:00000026 r4:ef11a200 [<c008c914>] (free_percpu_irq) from [<c043dd70>] (mvneta_open+0x118/0x134) r6:ffffffed r5:ef01e640 r4:ef01e000 r3:ef01e000 [<c043dc58>] (mvneta_open) from [<c055f5b4>] (__dev_open+0xa4/0x108) r7:ef01e030 r6:c06ff3d8 r5:ffff9003 r4:ef01e000 [<c055f510>] (__dev_open) from [<c055f844>] (__dev_change_flags+0x94/0x150) r7:00001002 r6:00000001 r5:ffff9003 r4:ef01e000 [<c055f7b0>] (__dev_change_flags) from [<c055f938>] (dev_change_flags+0x20/0x50) r8:00000000 r7:c09334c8 r6:00001002 r5:00000148 r4:ef01e000 r3:00008914 [<c055f918>] (dev_change_flags) from [<c05de044>] (devinet_ioctl+0x6f4/0x7e0) r8:00000000 r7:c09334c8 r6:00000000 r5:ee87200c r4:00000000 r3:00008914 [<c05dd950>] (devinet_ioctl) from [<c05e0168>] (inet_ioctl+0x1b8/0x1c8) r10:beb4499c r9:edfe4000 r8:ecf13280 r7:c096cf00 r6:beb4499c r5:eef7c240 r4:00008914 [<c05dffb0>] (inet_ioctl) from [<c053c898>] (sock_ioctl+0x78/0x300) [<c053c820>] (sock_ioctl) from [<c0155ecc>] (do_vfs_ioctl+0x98/0xa60) r7:00000011 r6:00008914 r5:00000011 r4:c01568d0 [<c0155e34>] (do_vfs_ioctl) from [<c01568d0>] (SyS_ioctl+0x3c/0x60) r10:00000000 r9:edfe4000 r8:beb4499c r7:00000011 r6:00008914 r5:ecf13280 r4:ecf13280 [<c0156894>] (SyS_ioctl) from [<c000fe60>] (ret_fast_syscall+0x0/0x1c) r8:c0010004 r7:00000036 r6:00000011 r5:000a2978 r4:00000000 r3:00009003 ---[ end trace 711f625d5b04b3a7 ]--- Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01r8152: clear LINK_OFF_WAKE_EN after autoresumehayeswang
LINK_OFF_WAKE_EN should be cleared after autoresume, otherwise after system suspend, the system would wake up when linking off occurs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01usb: dwc3: st: Use explicit reset_control_get_exclusive() APILee Jones
We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() APILee Jones
We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01phy: miphy28lp: Inform the reset framework that our reset line may be sharedLee Jones
On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01qlcnic: add wmb() call in transmit data path.Sony Chacko
Call wmb() to ensure writes are complete before hardware fetches updated Tx descriptors. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01x86/platform/intel-mid: Add pinctrl for Intel MerrifieldAndy Shevchenko
Intel Merrifield uses a special address space reserved for Family-Level Interface Shim (FLIS) that allows consumers to mux and configure pins. Create a platform device for it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1467226894-107109-1-git-send-email-andriy.shevchenko@linux.intel.com [ Fixed typo. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-01intel_th: Document output device callbacksAlexander Shishkin
'output' type device callbacks are missing from the kerneldoc description of the 'intel_th_driver' structure. Fix this. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-07-01intel_th: gth: Fix a source commentAlexander Shishkin
There's a kerneldoc comment that'd been derived from another one by way of copying-and-pasting but hadn't been subsequently amended to reflect the purpose of the function. Fix this. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-07-01intel_th: Add runtime power management handlingAlexander Shishkin
Currently, an Intel TH (pci) device will be always active, because the devices on the 'intel_th' bus don't implement runtime pm to track their usage. To address this, this patch adds runtime pm support to the 'intel_th' bus and some additional bits for the hub. The 'output' type device is in use while a capture is active; the 'source' type device (STH) relies on its child stm class device for runtime pm tracking. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-07-01stm class: Add runtime power management handlingAlexander Shishkin
Currently, there's no runtime pm in stm class devices, which makes it harder for the underlying hardware drivers to handle their power management. This patch applies the following runtime pm policy to stm class devices, which their parents can rely on for their power management tracking: * device is in use during character device writes, * delayed autosuspend is used to keep it active between adjacent writes, * device is in use while mmio regions are mapped, * device is is use while any stm_source devices are linked to it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
2016-07-01x86/Documentation: Fix various typos in Documentation/x86/ filesMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20160701034601.30308-1-standby24x7@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-01x86/amd_nb: Fix boot crash on non-AMD systemsBorislav Petkov
Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-01Merge tag 'perf-core-for-mingo-20160630' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow running 'perf test' entries in the same process, not forking to test each testcase, useful for debugging (Jiri Olsa) - Show number of samples in the stdio annotate header (Peter Zijlstra) Documentation changes: - Add documentation for perf.data on disk format (Andi Kleen) Build fixes: - Fix 'perf trace' build on old systems wrt missing SCHED_RESET_ON_FORK and eventfd.h (Arnaldo Carvalho de Melo) Infrastructure changes: - Utility function to fetch arch from evsel/evlist (Ravi Bangoria) Trivial changes: - Fix spelling mistake: "missmatch" -> "mismatch" in libbpf (Colin Ian King) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-30namespace: update event counter when umounting a deleted dentryAndrey Ulanov
- m_start() in fs/namespace.c expects that ns->event is incremented each time a mount added or removed from ns->list. - umount_tree() removes items from the list but does not increment event counter, expecting that it's done before the function is called. - There are some codepaths that call umount_tree() without updating "event" counter. e.g. from __detach_mounts(). - When this happens m_start may reuse a cached mount structure that no longer belongs to ns->list (i.e. use after free which usually leads to infinite loop). This change fixes the above problem by incrementing global event counter before invoking umount_tree(). Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589 Cc: stable@vger.kernel.org Signed-off-by: Andrey Ulanov <andreyu@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-309p: use file_dentry()Miklos Szeredi
v9fs may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. In this case it's a NULL pointer dereference in p9_fid_create(). Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Reported-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30x86/power/64: Fix kernel text mapping corruption during image restorationRafael J. Wysocki
Logan Gunthorpe reports that hibernation stopped working reliably for him after commit ab76f7b4ab23 (x86/mm: Set NX on gap between __ex_table and rodata). That turns out to be a consequence of a long-standing issue with the 64-bit image restoration code on x86, which is that the temporary page tables set up by it to avoid page tables corruption when the last bits of the image kernel's memory contents are copied into their original page frames re-use the boot kernel's text mapping, but that mapping may very well get corrupted just like any other part of the page tables. Of course, if that happens, the final jump to the image kernel's entry point will go to nowhere. The exact reason why commit ab76f7b4ab23 matters here is that it sometimes causes a PMD of a large page to be split into PTEs that are allocated dynamically and get corrupted during image restoration as described above. To fix that issue note that the code copying the last bits of the image kernel's memory contents to the page frames occupied by them previoulsy doesn't use the kernel text mapping, because it runs from a special page covered by the identity mapping set up for that code from scratch. Hence, the kernel text mapping is only needed before that code starts to run and then it will only be used just for the final jump to the image kernel's entry point. Accordingly, the temporary page tables set up in swsusp_arch_resume() on x86-64 need to contain the kernel text mapping too. That mapping is only going to be used for the final jump to the image kernel, so it only needs to cover the image kernel's entry point, because the first thing the image kernel does after getting control back is to switch over to its own original page tables. Moreover, the virtual address of the image kernel's entry point in that mapping has to be the same as the one mapped by the image kernel's page tables. With that in mind, modify the x86-64's arch_hibernation_header_save() and arch_hibernation_header_restore() routines to pass the physical address of the image kernel's entry point (in addition to its virtual address) to the boot kernel (a small piece of assembly code involved in passing the entry point's virtual address to the image kernel is not necessary any more after that, so drop it). Update RESTORE_MAGIC too to reflect the image header format change. Next, in set_up_temporary_mappings(), use the physical and virtual addresses of the image kernel's entry point passed in the image header to set up a minimum kernel text mapping (using memory pages that won't be overwritten by the image kernel's memory contents) that will map those addresses to each other as appropriate. This makes the concern about the possible corruption of the original boot kernel text mapping go away and if the the minimum kernel text mapping used for the final jump marks the image kernel's entry point memory as executable, the jump to it is guaraneed to succeed. Fixes: ab76f7b4ab23 (x86/mm: Set NX on gap between __ex_table and rodata) Link: http://marc.info/?l=linux-pm&m=146372852823760&w=2 Reported-by: Logan Gunthorpe <logang@deltatee.com> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-30perf tools: Change cpu_map__fprintf outputJiri Olsa
Display cpu map in standard list form. (perf report -D output on perf stat data). before: 0x590 [0x18]: PERF_RECORD_CPU_MAP nr: 4 cpus: 0, 1, 2, 3 after: 0x590 [0x18]: PERF_RECORD_CPU_MAP: 0-3 Adding automated testcase. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf test: Add -F/--dont-fork optionJiri Olsa
Adding -F/--dont-fork option to bypass forking for each test. It's useful for debugging test. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf tests: Fix thread map test for -F optionJiri Olsa
I hit a bug when running test suite without forking each test (-F option): $ perf test -Fv ... 34: Test thread map : --- start --- FAILED tests/thread-map.c:24 wrong comm ---- end ---- Test thread map: FAILED! The reason was the process name wasn't 'perf' as expected by the test, because other tests set the name as well. Setting it explicitly now. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf tools: Allow to reset open files counterJiri Olsa
I hit a bug when running test suite without forking each test (-F option): $ perf test -F dso 8: Test dso data read : Ok 9: Test dso data cache : FAILED! 10: Test dso data reopen : FAILED! The reason the session file limit is set just once for perf process so we need to reset it for each test, otherwise wrong limit is taken into account. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf trace beauty eventfd: No need to include eventfd.hArnaldo Carvalho de Melo
Old systems such as RHEL5 lack this file, and what we need is already under ifdefs, so just ditch this #include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dzbjfllw6znuoy37skwnwa4r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf trace beauty sched_policy: Define SCHED_RESET_ON_FORK for older systemsArnaldo Carvalho de Melo
RHEL5 for instance doesn't have this one, help it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3adewnii78zi110eovfciopy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf annotate: Add number of samples to the headerPeter Zijlstra (Intel)
Staring at annotations of large functions is useless if there's only a few samples in them. Report the number of samples in the header to make this easier to determine. Committer note: The change amounts to: - Percent | Source code & Disassembly of perf-vdso.so for cycles:u ------------------------------------------------------------------ + Percent | Source code & Disassembly of perf-vdso.so for cycles:u (3278 samples) +-------------------------------------------------------------------------------- Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30lockd: unregister notifier blocks if the service fails to come up completelyScott Mayhew
If the lockd service fails to start up then we need to be sure that the notifier blocks are not registered, otherwise a subsequent start of the service could cause the same notifier to be registered twice, leading to soft lockups. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Fixes: 0751ddf77b6a "lockd: Register callbacks on the inetaddr_chain..." Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-06-30writeback: inode cgroup wb switch should not call ihold()Tahsin Erdogan
Asynchronous wb switching of inodes takes an additional ref count on an inode to make sure inode remains valid until switchover is completed. However, anyone calling ihold() must already have a ref count on inode, but in this case inode->i_count may already be zero: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 917 at fs/inode.c:397 ihold+0x2b/0x30 CPU: 1 PID: 917 Comm: kworker/u4:5 Not tainted 4.7.0-rc2+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-8:16) 0000000000000000 ffff88007ca0fb58 ffffffff805990af 0000000000000000 0000000000000000 ffff88007ca0fb98 ffffffff80268702 0000018d000004e2 ffff88007cef40e8 ffff88007c9b89a8 ffff880079e3a740 0000000000000003 Call Trace: [<ffffffff805990af>] dump_stack+0x4d/0x6e [<ffffffff80268702>] __warn+0xc2/0xe0 [<ffffffff802687d8>] warn_slowpath_null+0x18/0x20 [<ffffffff8035b4ab>] ihold+0x2b/0x30 [<ffffffff80367ecc>] inode_switch_wbs+0x11c/0x180 [<ffffffff80369110>] wbc_detach_inode+0x170/0x1a0 [<ffffffff80369abc>] writeback_sb_inodes+0x21c/0x530 [<ffffffff80369f7e>] wb_writeback+0xee/0x1e0 [<ffffffff8036a147>] wb_workfn+0xd7/0x280 [<ffffffff80287531>] ? try_to_wake_up+0x1b1/0x2b0 [<ffffffff8027bb09>] process_one_work+0x129/0x300 [<ffffffff8027be06>] worker_thread+0x126/0x480 [<ffffffff8098cde7>] ? __schedule+0x1c7/0x561 [<ffffffff8027bce0>] ? process_one_work+0x300/0x300 [<ffffffff80280ff4>] kthread+0xc4/0xe0 [<ffffffff80335578>] ? kfree+0xc8/0x100 [<ffffffff809903cf>] ret_from_fork+0x1f/0x40 [<ffffffff80280f30>] ? __kthread_parkme+0x70/0x70 ---[ end trace aaefd2fd9f306bc4 ]--- Signed-off-by: Tahsin Erdogan <tahsin@google.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-30drm/sun4i: Send vblank event when the CRTC is disabledMaxime Ripard
So far, we were missing to send the vblank event when disabling the CRTC, making us never report the last vblank event. This was causing a time out on the page flip, which should be solved now. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-30drm/sun4i: Report proper vblankMaxime Ripard
The sun4i display engine doesn't have any vblank counter. Use the proper helper for that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-30iio: magn: ak8975: deploy runtime and system PMLinus Walleij
This adds runtime PM support to the AK8975 driver. It solves two problems: - After reading the first value the chip was left in MODE_ONCE, meaning (presumably) it may be consuming more power. Now the runtime PM hooks kick in and set it to POWER_DOWN. - Regulators were simply enabled and left on, making it impossible to turn the power consuming regulators off because of the increased refcount. We now disable the regulators at autosuspend. - We also handle system suspend: by using pm_runtime_force_suspend() and pm_runtime_force_resume() from the system PM sleep hooks, the runtime PM code is managing the power also for this case. It is currently not completely optimal: when the system resumes the AK8975 goes into active mode even if noone is going to use it: currently the force calls need to be paired, but the runtime PM people are working on making it possible to leave devices runtime suspended when coming back from sleep. Inspired by my work on the BH1780 light sensor driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: magn: ak8975: make sure to power down at remove()Linus Walleij
The code was not powering the magnetometer down properly at remove(): just cutting the regulators without first setting the device in power off mode. Fix this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: magn: ak8975: allow a delay after enabling regulatorsLinus Walleij
The datasheet actually specifies that we need to wait atleast 500us after powering on the device before trying to set mode. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: magn: ak8975: refactor regulator handlersLinus Walleij
Move the regulator_get() calls directly into the probe() function, keep only the power_on()/power_off() functions to flick the regulators on/off. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: magn: ak8975: add Vid regulatorLinus Walleij
The AK8975 has two power sources: Vdd (analog voltage supply) and Vid (digital voltage supply). Optionally also obtain the Vid supply regulator and enable it. If an error occurs when enabling one of the regulators: bail out. Cc: Gregor Boirie <gregor.boirie@parrot.com> Cc: Richard Leitner <dev@g0hl1n.net> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: magn: ak8975: fix regulator usageLinus Walleij
IS_ERR_OR_NULL() should never be used with regulators because a NULL pointer may be a perfectly valid dummy regulator We should always succeed to fetch and enable a regulator, but it may be a dummy. That is fine, so bail out for any real errors or probe deferrals Include the error code in the warning print so we know what kind of problem we're dealing with (for example it is nice to see if it is a probe deferral). As we will bail out of probe if the regulator is erroneous, just issue regulator_disable() on the poweroff path: it will succeed. Cc: Mark Brown <broonie@kernel.org> Cc: Lars-Peter Clausen Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: pressure: bmp280: add reset GPIO line handlingLinus Walleij
On the APQ8060 Dragonboard the reset line to the BMP085 pressure sensor is not deasserted on boot, so the driver needs to handle this. For a simple GPIO line supplied as a descriptor (from a board file, device tree or ACPI) this does the trick. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: pressure: bmp280: support device tree initializationLinus Walleij
This adds device tree support to the BMP085, BMP180 and BMP280 pressure sensors. Tested on the Qualcomm APQ8060 Dragonboard: iio:device1$ cat in_temp_input 26700 iio:device1$ cat in_pressure_input 99.185000000 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio: pressure: bmp280: augment DT bindingsLinus Walleij
This adds standard device tree bindings for a reset GPIO line, and the VDDD and VDDA power regulators. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30Add .pyc files to .gitignoreJonathan Corbet
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-06-30Doc: PM: Fix a typo in intel_powerclamp.txtMasanari Iida
This patch fix a spelling typo in intel_powerclamp.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-06-30doc-rst: flat-table directive - initial implementationMarkus Heiser
Implements the reST flat-table directive. The ``flat-table`` is a double-stage list similar to the ``list-table`` with some additional features: * column-span: with the role ``cspan`` a cell can be extended through additional columns * row-span: with the role ``rspan`` a cell can be extended through additional rows * auto span rightmost cell of a table row over the missing cells on the right side of that table-row. With Option ``:fill-cells:`` this behavior can changed from *auto span* to *auto fill*, which automaticly inserts (empty) list tables The *list tables* formats are double stage lists. Compared to the ASCII-art they migth be less comfortable for readers of the text-files. Their advantage is, that they are easy to create/modify and that the diff of a modification is much more meaningfull, because it is limited to the modified content. The initial implementation was taken from the sphkerneldoc project [1] [1] https://github.com/return42/sphkerneldoc/commits/master/scripts/site-python/linuxdoc/rstFlatTable.py Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> [jc: fixed typos and misspellings in the docs] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-06-30iio:core: timestamping clock selection supportGregor Boirie
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30timekeeping: export get_monotonic_coarse64 symbolGregor Boirie
EXPORT_SYMBOL() get_monotonic_coarse64 for new IIO timestamping clock selection usage. This provides user apps the ability to request a particular IIO device to timestamp samples using a monotonic coarse clock granularity. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM and x86 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode. KVM: LAPIC: cap __delay at lapic_timer_advance_ns KVM: x86: move nsec_to_cycles from x86.c to x86.h pvclock: Get rid of __pvclock_read_cycles in function pvclock_read_flags pvclock: Cleanup to remove function pvclock_get_nsec_offset pvclock: Add CPU barriers to get correct version value KVM: arm/arm64: Stop leaking vcpu pid references arm64: KVM: fix build with CONFIG_ARM_PMU disabled
2016-06-30Merge tag 'arc-4.7-rc6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Reinstate dwarf unwinder/loadable-modules with new gnu tools" * tag 'arc-4.7-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: unwind: warn only once if DW2_UNWIND is disabled ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)
2016-06-30Merge tag 'pwm/for-4.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "One more fix for some fallout observed after the introduction of the atomic API" * tag 'pwm/for-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix pwm_apply_args()
generated by cgit (git 2.34.1) at 2025-09-17 11:50:25 +0000