| Age | Commit message (Collapse) | Author |
|---|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-10-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move more infrastructure to the pidfd header.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-9-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that necessary ioctl infrastructure is available.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-8-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that necessary defines are present.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-7-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some tools like systemd's jounral need to retrieve the exit and cgroup
information after a process has already been reaped. This can e.g.,
happen when retrieving a pidfd via SCM_PIDFD or SCM_PEERPIDFD.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-6-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Record the exit code and cgroupid in release_task() and stash in struct
pidfs_exit_info so it can be retrieved even after the task has been
reaped.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-5-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Introduce a private inode slab cache for pidfs. In follow-up patches
pidfs will gain the ability to provide exit information to userspace
after the task has been reaped. This means storing exit information even
after the task has already been released and struct pid's task linkage
is gone. Store that information alongside the inode.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-4-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead od adding it into __pidfd_prepare() place it where the actual
file allocation happens and update the outdated comment.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-3-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rely on scope-based cleanup for the allocated file descriptor.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-2-c8c3d8361705@kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We have a helper that deals with all the required logic.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-1-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
[ 4.239592] =============================
[ 4.239595] [ BUG: Invalid wait context ]
[ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
[ 4.239603] -----------------------------
[ 4.239606] kworker/u8:5/76 is trying to lock:
[ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.239641] other info that might help us debug this:
[ 4.239643] context-{5:5}
[ 4.239646] 5 locks held by kworker/u8:5/76:
[ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
[ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
[ 4.254109] #2: ffff00000920c8f8
[ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
[ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
[ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
[ 4.264840] #4:
[ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
[ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
[ 4.304082] stack backtrace:
[ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
[ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 4.304097] Workqueue: async async_run_entry_fn
[ 4.304106] Call trace:
[ 4.304110] show_stack+0x14/0x20 (C)
[ 4.304122] dump_stack_lvl+0x6c/0x90
[ 4.304131] dump_stack+0x14/0x1c
[ 4.304138] __lock_acquire+0xdfc/0x1584
[ 4.426274] lock_acquire+0x1c4/0x33c
[ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80
[ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8
[ 4.444422] __irq_set_trigger+0x5c/0x178
[ 4.448435] __setup_irq+0x2e4/0x690
[ 4.452012] request_threaded_irq+0xc4/0x190
[ 4.456285] devm_request_threaded_irq+0x7c/0xf4
[ 4.459398] ata1: link resume succeeded after 1 retries
[ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0
[ 4.470660] mmc_start_host+0x50/0xac
[ 4.474327] mmc_add_host+0x80/0xe4
[ 4.477817] tmio_mmc_host_probe+0x2b0/0x440
[ 4.482094] renesas_sdhi_probe+0x488/0x6f4
[ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78
[ 4.491509] platform_probe+0x64/0xd8
[ 4.495178] really_probe+0xb8/0x2a8
[ 4.498756] __driver_probe_device+0x74/0x118
[ 4.503116] driver_probe_device+0x3c/0x154
[ 4.507303] __device_attach_driver+0xd4/0x160
[ 4.511750] bus_for_each_drv+0x84/0xe0
[ 4.515588] __device_attach_async_helper+0xb0/0xdc
[ 4.520470] async_run_entry_fn+0x30/0xd8
[ 4.524481] process_one_work+0x210/0x62c
[ 4.528494] worker_thread+0x1ac/0x340
[ 4.532245] kthread+0x10c/0x110
[ 4.535476] ret_from_fork+0x10/0x20
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 828546e24280 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
ext4 and ceph already have a folio to pass; f2fs needs to be properly
converted but this will do for now. This removes a reference
to page->index and page->mapping as well as removing a call to
compound_head().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250304170224.523141-1-willy@infradead.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The PMF driver allocates a shared memory buffer using
tee_shm_alloc_kernel_buf() for communication with the PMF-TA.
The latest PMF-TA version introduces new structures with OEM debug
information and additional policy input conditions for evaluating the
policy binary. Consequently, the shared memory size must be increased to
ensure compatibility between the PMF driver and the updated PMF-TA.
To do so, introduce the new PMF-TA UUID and update the PMF shared memory
configuration to ensure compatibility with the latest PMF-TA version.
Additionally, export the TA UUID.
These updates will result in modifications to the prototypes of
amd_pmf_tee_init() and amd_pmf_ta_open_session().
Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure
that the actual result from the PMF-TA is returned rather than a generic
EIO. This change allows for proper handling of errors originating from the
PMF-TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the 'k' prefix to id 21000. And id `u1000` in the third
idmapping should be mapped to `k31000`, not `u31000`.
Signed-off-by: Aiden Ma <jiaheng.ma@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4E7B1F143E8051530C21FCADF4E014DCBB06@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix a warning spotted by linux-next build (htmldocs):
Documentation/filesystems/porting.rst:1186: WARNING: Inline emphasis start-string without end-string. [docutils]
Introduced by commit
88d5baf69082 ("Change inode_operations.mkdir to return struct dentry *")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 88d5baf69082 ("Change inode_operations.mkdir to return struct dentry *")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
NeilBrown <neilb@suse.de> says:
This revised series contains a few clean-ups as requested by various
people but no substantial changes.
I reviewed the mkdir functions in many (all?) filesystems and found a
few that use d_instantiate() on an unlocked inode (after
unlock_new_inode()) and also support export_operations. These could
potentially call d_instantiate() on a directory inode which is already
attached to a dentry, though making that happen would usually require
guessing the filehandle correctly. I haven't tried to address those
here, (this patch set doesn't make that situation any worse) but I may
in the future.
* patches from https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de:
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
vfs_mkdir() does not guarantee to leave the child dentry hashed or make
it positive on success, and in many such cases the filesystem had to use
a different dentry which it can now return.
This patch changes vfs_mkdir() to return the dentry provided by the
filesystems which is hashed and positive when provided. This reduces
the number of cases where the resulting dentry is not positive to a
handful which don't deserve extra efforts.
The only callers of vfs_mkdir() which are interested in the resulting
inode are in-kernel filesystem clients: cachefiles, nfsd, smb/server.
The only filesystems that don't reliably provide the inode are:
- kernfs, tracefs which these clients are unlikely to be interested in
- cifs in some configurations would need to do a lookup to find the
created inode, but doesn't. cifs cannot be exported via NFS, is
unlikely to be used by cachefiles, and smb/server only has a soft
requirement for the inode, so this is unlikely to be a problem in
practice.
- hostfs, nfs, cifs may need to do a lookup (rarely for NFS) and it is
possible for a race to make that lookup fail. Actual failure
is unlikely and providing callers handle negative dentries graceful
they will fail-safe.
So this patch removes the lookup code in nfsd and smb/server and adjusts
them to fail safe if a negative dentry is provided:
- cache-files already fails safe by restarting the task from the
top - it still does with this change, though it no longer calls
cachefiles_put_directory() as that will crash if the dentry is
negative.
- nfsd reports "Server-fault" which it what it used to do if the lookup
failed. This will never happen on any file-systems that it can actually
export, so this is of no consequence. I removed the fh_update()
call as that is not needed and out-of-place. A subsequent
nfsd_create_setattr() call will call fh_update() when needed.
- smb/server only wants the inode to call ksmbd_smb_inherit_owner()
which updates ->i_uid (without calling notify_change() or similar)
which can be safely skipping on cifs (I hope).
If a different dentry is returned, the first one is put. If necessary
the fact that it is new can be determined by comparing pointers. A new
dentry will certainly have a new pointer (as the old is put after the
new is obtained).
Similarly if an error is returned (via ERR_PTR()) the original dentry is
put.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-7-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
mkdir now allows a different dentry to be returned which is sometimes
relevant for nfs.
This patch changes the nfs_rpc_ops mkdir op to return a dentry, and
passes that back to the caller.
The mkdir nfs_rpc_op will return NULL if the original dentry should be
used. This matches the mkdir inode_operation.
nfs4_do_create() is duplicated to nfs4_do_mkdir() which is changed to
handle the specifics of directories. Consequently the current special
handling for directories is removed from nfs4_do_create()
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-6-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fuse already uses d_splice_alias() to ensure an appropriate dentry is
found for a newly created dentry. Now that ->mkdir can return that
dentry we do so.
This requires changing create_new_entry() to return a dentry and
handling that change in all callers.
Note that when create_new_entry() is asked to create anything other than
a directory we can be sure it will NOT return an alternate dentry as
d_splice_alias() only returns an alternate dentry for directories.
So we don't need to check for that case when passing one the result.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/174112490070.33508.15852253149143067890@noble.neil.brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__filemap_get_folio() returns an ERR_PTR, not NULL. There are extensive
assumptions that ctl->folio is NULL, not an error pointer, so it seems
better to fix this one place rather than change all the places which
check ctl->folio.
Fixes: baff9740bc8f ("ceph: Convert ceph_readdir_cache_control to store a folio")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250304154818.250757-1-willy@infradead.org
Cc: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences
persistent humming noise when the power_save mode is enabled.
This issue occurs when the codec enters power saving mode,
leading to unwanted noise from the speakers.
This patch adds the affected model (PCI ID 0x1028:0x0962) to the
power_save denylist to ensure power_save is disabled by default,
preventing power-off related noise issues.
Steps to Reproduce
1. Boot the system with `snd_hda_intel` loaded.
2. Verify that `power_save` mode is enabled:
```sh
cat /sys/module/snd_hda_intel/parameters/power_save
````
output: 10 (default power save timeout)
3. Wait for the power save timeout
4. Observe a persistent humming noise from the speakers
5. Disable `power_save` manually:
```sh
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save
````
6. Confirm that the noise disappears immediately.
This issue has been observed on my system, and this patch
successfully eliminates the unwanted noise. If other users
experience similar issues, additional reports would be helpful.
Signed-off-by: Hoku Ishibe <me@hokuishi.be>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250224020517.51035-1-me@hokuishi.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add ALC222 its own depop functions for alc_init and alc_shutup.
[note: this fixes pop noise issues on the models with two headphone
jacks -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If 'n' or 'size' isn't builtin constant, we used to call __kmalloc()
before commit 7bd230a26648 ("mm/slab: enable slab allocation tagging for
kmalloc and friends"), which inadvertedly changed both paths to
kmalloc_noprof().
As Harry Yoo points out we can just call kmalloc_noprof()
unconditionally. If the compiler knows n and size are constants it
doesn't guarantee that bytes will be also seen as constant, and that is
the important test in kmalloc_noprof() anyway, so we can just defer to
it always.
[ vbabka@suse.cz: change as Harry suggested and adjust commit log ]
Fixes: 7bd230a26648 ("mm/slab: enable slab allocation tagging for kmalloc and friends")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The total size calculated for EPC can overflow u64 given the added up page
for SECS. Further, the total size calculated for shmem can overflow even
when the EPC size stays within limits of u64, given that it adds the extra
space for 128 byte PCMD structures (one for each page).
Address this by pre-evaluating the micro-architectural requirement of
SGX: the address space size must be power of two. This is eventually
checked up by ECREATE but the pre-check has the additional benefit of
making sure that there is some space for additional data.
Fixes: 888d24911787 ("x86/sgx: Add SGX_IOC_ENCLAVE_CREATE")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250305050006.43896-1-jarkko@kernel.org
Closes: https://lore.kernel.org/linux-sgx/c87e01a0-e7dd-4749-a348-0980d3444f04@stanley.mountain/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD microcode loading fixes from Borislav Petkov:
- Load only sha256-signed microcode patch blobs
- Other good cleanups
* tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load only SHA256-checksummed patches
x86/microcode/AMD: Add get_patch_level()
x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration
x86/microcode/AMD: Merge early_apply_microcode() into its single callsite
x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations
x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
|
|
Unfortunately, __builtin_dynamic_object_size() does not take into account
flexible array sizes, even when they are sized by __counted_by. As a
result, the size tests for the flexible arrays need to be separated to
get an accurate check of the compiler's behavior. While at it, fully test
sizeof, __struct_size (bdos(..., 0)), and __member_size (bdos(..., 1)).
I still think this is a compiler design issue, but there's not much to
be done about it currently beyond adjusting these tests. GCC and Clang
agree on this behavior at least. :)
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/lkml/e1a1531d-6968-4ae8-a3b5-5ea0547ec4b3@t-8ch.de/
Fixes: 9dd5134c6158 ("kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX()")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.
Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luca Weiss says:
====================
Fixes for IPA v4.7
During bringup of IPA v4.7 unfortunately some bits were missed, and it
couldn't be tested much back then due to missing features in tqftpserv
which caused the modem to not enable correctly.
Especially the last commit is important since it makes mobile data
actually functional on SoCs with IPA v4.7 like SM6350 - used on the
Fairphone 4. Before that, you'd get an IP address on the interface but
then e.g. ping never got any response back.
====================
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the checksum option for these two endpoints in order to allow
mobile data to actually work. Without this, no packets seem to make it
through the IPA.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per downstream reference, max_writes should be 12 and max_reads
should be 13.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f4c5c1eaf02f003d7d588ba6706aa71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78d63a2a621b30caff8b9424160c6c89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a8153627520a ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997979fbf11765281ef752f07c5cf25bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
