| Age | Commit message (Collapse) | Author |
|---|
|
... as the comments in reparent() clearly say. As it is, we reparent
*all* overmounts of the mounts being taken out, including those that
are taken out themselves. It's not only a potentially massive slowdown
(on a pathological setup we might end up with O(N^2) time for N mounts
being kicked out), it can end up with incorrect ->overmount in the
surviving mounts.
Fixes: f0d0ba19985d "Rewrite of propagate_umount()"
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In case when we mounting something on top of a large stack of overmounts,
all of them being peers of each other, we get quadratic time by the
depth of overmount stack. Easily fixed by doing commit_tree() before
reparenting the overmount; simplifies commit_tree() as well - it doesn't
need to skip the already mounted stuff that had been reparented on top
of the new mounts.
Since we are holding mount_lock through both reparenting and call of
commit_tree(), the order does not matter from the mount hash point
of view.
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 663206854f02 "copy_tree(): don't link the mounts via mnt_list"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is a copy and paste error and we accidentally use "PTR_ERR(rdev)"
instead of "error". The "rdev" pointer is valid at this point.
Also there is no need to print the error code in the error message
because dev_err_probe() already prints that. So clean up the error
message a bit.
Fixes: 38c9f98db20a ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKRGmVdbvT1HBvm8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In several code paths, such as xe_pt_create(), the vm->xef field is used
to determine whether a VM originates from userspace or the kernel.
Previously, this handler was only assigned in xe_vm_create_ioctl(),
after the VM was created by xe_vm_create(). However, xe_vm_create()
triggers page table creation, and that function assumes vm->xef should
be already set. This could lead to incorrect origin detection.
To fix this problem and ensure consistency in the initialization of
the VM object, let's move the assignment of this handler to
xe_vm_create.
v2:
- take reference to the xe file object only when xef is not NULL
- release the reference to the xe file object on the error path (Matthew)
Fixes: 7f387e6012b6 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 9337166fa1d80f7bb7c7d3a8f901f21c348c0f2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Partially revert commit e1db856bd288 ("usb: xhci: remove '0' write to
write-1-to-clear register") because the patch cleared the Interrupt Pending
bit during interrupt enabling and disabling. The Interrupt Pending bit
should only be cleared when the driver has handled the interrupt.
Ideally, all interrupts should be handled before disabling the interrupt;
consequently, no interrupt should be pending when enabling the interrupt.
For this reason, keep the debug message informing if an interrupt is still
pending when an interrupt is disabled.
Because the Interrupt Pending bit is write-1-to-clear, writing '0' to it
ensures that the state does not change.
Link: https://lore.kernel.org/linux-usb/20250818231103.672ec7ed@foxbook
Fixes: e1db856bd288 ("usb: xhci: remove '0' write to write-1-to-clear register")
Closes: https://bbs.archlinux.org/viewtopic.php?id=307641
cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
Cc: stable@vger.kernel.org
Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend")
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit f08d0c3a7111 ("pidfd: add PIDFD_SELF* sentinels to refer to own
thread/process") introduced a leak by acquiring a pid reference through
get_task_pid(), which increments pid->count but never drops it with
put_pid().
As a result, kmemleak reports unreferenced pid objects after running
tools/testing/selftests/pidfd/pidfd_test, for example:
unreferenced object 0xff1100206757a940 (size 160):
comm "pidfd_test", pid 16965, jiffies 4294853028
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 fd 57 50 04 .............WP.
5e 44 00 00 00 00 00 00 18 de 34 17 01 00 11 ff ^D........4.....
backtrace (crc cd8844d4):
kmem_cache_alloc_noprof+0x2f4/0x3f0
alloc_pid+0x54/0x3d0
copy_process+0xd58/0x1740
kernel_clone+0x99/0x3b0
__do_sys_clone3+0xbe/0x100
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by calling put_pid() after do_pidfd_send_signal() returns.
Fixes: f08d0c3a7111 ("pidfd: add PIDFD_SELF* sentinels to refer to own thread/process")
Signed-off-by: Adrian Huang (Lenovo) <adrianhuang0701@gmail.com>
Link: https://lore.kernel.org/20250818134310.12273-1-adrianhuang0701@gmail.com
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Userspace doesn't expect a failure to list extended attributes:
$ ls -lA /sys/
ls: /sys/: No data available
ls: /sys/kernel: No data available
ls: /sys/power: No data available
ls: /sys/class: No data available
ls: /sys/devices: No data available
ls: /sys/dev: No data available
ls: /sys/hypervisor: No data available
ls: /sys/fs: No data available
ls: /sys/bus: No data available
ls: /sys/firmware: No data available
ls: /sys/block: No data available
ls: /sys/module: No data available
total 0
drwxr-xr-x 2 root root 0 Jan 1 1970 block
drwxr-xr-x 52 root root 0 Jan 1 1970 bus
drwxr-xr-x 88 root root 0 Jan 1 1970 class
drwxr-xr-x 4 root root 0 Jan 1 1970 dev
drwxr-xr-x 11 root root 0 Jan 1 1970 devices
drwxr-xr-x 3 root root 0 Jan 1 1970 firmware
drwxr-xr-x 10 root root 0 Jan 1 1970 fs
drwxr-xr-x 2 root root 0 Jul 2 09:43 hypervisor
drwxr-xr-x 14 root root 0 Jan 1 1970 kernel
drwxr-xr-x 251 root root 0 Jan 1 1970 module
drwxr-xr-x 3 root root 0 Jul 2 09:43 power
Fix it by simply reporting success when no extended attributes are
available instead of reporting ENODATA.
Link: https://lore.kernel.org/78b13bcdae82ade95e88f315682966051f461dde.camel@linaro.org
Fixes: d1f4e9026007 ("kernfs: remove iattr_mutex") # mainline only
Reported-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/20250819-ahndung-abgaben-524a535f8101@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The coredump_parse() function is bool type. It should return true on
success and false on failure. The cn_printf() returns zero on success
or negative error codes. This mismatch means that when "return err;"
here, it is treated as success instead of failure. Change it to return
false instead.
Fixes: a5715af549b2 ("coredump: make coredump_parse() return bool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/aKRGu14w5vPSZLgv@stanley.mountain
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In get_channel(), the reference obtained by bus_find_device_by_name()
was dropped via put_device() before accessing the device's driver data
Move put_device() after usage to avoid potential issues.
Fixes: 2485055394be ("staging: most: core: drop device reference")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250804082955.3621026-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable <stable@kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
do_insnlist_ioctl()
syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel
buffer is allocated to hold `insn->n` samples (each of which is an
`unsigned int`). For some instruction types, `insn->n` samples are
copied back to user-space, unless an error code is being returned. The
problem is that not all the instruction handlers that need to return
data to userspace fill in the whole `insn->n` samples, so that there is
an information leak. There is a similar syzbot report for
`do_insnlist_ioctl()`, although it does not have a reproducer for it at
the time of writing.
One culprit is `insn_rw_emulate_bits()` which is used as the handler for
`INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have
a specific handler for that instruction, but do have an `INSN_BITS`
handler. For `INSN_READ` it only fills in at most 1 sample, so if
`insn->n` is greater than 1, the remaining `insn->n - 1` samples copied
to userspace will be uninitialized kernel data.
Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It
never returns an error, even if it fails to fill the buffer.
Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure
that uninitialized parts of the allocated buffer are zeroed before
handling each instruction.
Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix
replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not
always necessary to clear the whole buffer.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Reported-by: syzbot+a5e45f768aab5892da5d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5e45f768aab5892da5d
Reported-by: syzbot+fb4362a104d45ab09cf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fb4362a104d45ab09cf9
Cc: stable <stable@kernel.org> # 5.13+
Cc: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725125324.80276-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below.
Fixes: fff46207245c ("staging: comedi: pcl726: enable the interrupt support code")
Cc: stable <stable@kernel.org> # 5.13+
Reported-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5cd373521edd68bebcb3
Tested-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/tencent_3C66983CC1369E962436264A50759176BF09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of
the source string (excluding the NUL terminator) rather than the size of
the destination buffer. This results in one character less being copied
from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'.
Use the destination buffer size instead to ensure the name is copied
correctly.
Cc: stable <stable@kernel.org>
Fixes: 2a226927d9b8 ("cdx: add rpmsg communication channel for CDX")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250806090512.121260-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_map_sgtable() returns only 0 or the error code. Read sgt->nents to
get the number of mapped segments.
Fixes: 37e00703228a ("zynq_fpga: use sgtable-based scatterlist wrappers")
Reported-by: Pavel Pisa <pisa@fel.cvut.cz>
Closes: https://lore.kernel.org/linux-fpga/202508041548.22955.pisa@fel.cvut.cz/
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Tested-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://lore.kernel.org/r/20250806070605.1920909-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fusb302 irq handler has been carefully optimized by Hans de Goede in
commit 207338ec5a27 ("usb: typec: fusb302: Improve suspend/resume
handling"). A recent 'fix' undid most of that work to avoid a virtio-gpio
driver bug.
This reverts the incorrect fix, since it is of very low quality. It
reverts the quirks from Hans change (and thus reintroduces the problems
fixed by Hans) while keeping the overhead from the original change.
The proper fix to support using fusb302 with an interrupt line provided
by virtio-gpio must be implemented in the virtio driver instead, which
should support disabling the IRQ from the fusb302 interrupt routine.
Cc: Hans de Goede <hansg@kernel.org>
Cc: Yongbo Zhang <giraffesnn123@gmail.com>
Fixes: 1c2d81bded19 ("usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250818-fusb302-unthreaded-irq-v1-1-3a9a11a9f56f@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kerneldoc added for usb_hcd_giveback_urb() by commit 41631d3616c3
("usb: core: Replace in_interrupt() in comments") is unclear and
incorrect. Update the text for greater clarity and to say that URBs
for a root hub will always use a BH context for their completion.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/41eaae05-116a-4568-940c-eeb94ab6baa0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reload.
To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.
Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,
- emac_ndo_stop()
Firmwares are stopped
- emac_ndo_open()
Firmwares are loaded
In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.
To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()
Fixes: 56375086d093 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.
Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-2-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure ndo_fill_forward_path() is called with RCU lock held.
Fixes: 2830e314778d ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current GDS mitigation logic incorrectly returns early when the
attack vector mitigation is turned off, which leads to two problems:
1. CPUs without ARCH_CAP_GDS_CTRL support are incorrectly marked with
GDS_MITIGATION_OFF when they should be marked as
GDS_MITIGATION_UCODE_NEEDED.
2. The mitigation state checks and locking verification that follow are
skipped, which means:
- fail to detect if the mitigation was locked
- miss the warning when trying to disable a locked mitigation
Remove the early return to ensure proper mitigation state handling. This
allows:
- Proper mitigation classification for non-ARCH_CAP_GDS_CTRL CPUs
- Complete mitigation state verification
This also addresses the failed MSR 0x123 write attempt at boot on
non-ARCH_CAP_GDS_CTRL CPUs:
unchecked MSR access error: WRMSR to 0x123 (tried to write 0x0000000000000010) at rIP: ... (update_gds_msr)
Call Trace:
identify_secondary_cpu
start_secondary
common_startup_64
WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/bugs.c:1053 update_gds_msr
[ bp: Massage, zap superfluous braces. ]
Fixes: 8c7261abcb7ad ("x86/bugs: Add attack vector controls for GDS")
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/20250819023356.2012-1-lirongqing@baidu.com
|
|
CACHE_MODE_0 registers should be saved and restored as part of
the context, not during engine reset. Move the related workaround
(Disable Repacking for Compression) from rcs_engine_wa_init()
to icl_ctx_workarounds_init() for Jasper Lake and Elkhart
Lake platforms. This ensures the WA is applied during context
initialisation.
BSPEC: 11322
Fixes: 0ddae025ab6c ("drm/i915: Disable compression tricks on JSL")
Closes: Fixes: 0ddae025ab6c ("drm/i915: Disable compression tricks on JSL")
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/4feaa24094e019e000ceb6011d8cd419b0361b3f.1754902406.git.sebastian.brzezinka@intel.com
(cherry picked from commit c9932f0d604e4c8f2c6018e598a322acb43c68a2)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Commit 8d9908e8fe9c ("drm/i915/display: remove small micro-optimizations
in irq handling") not only removed the optimizations, it also enabled
wakeref asserts for the GEN11_GU_MISC_IIR access. Silence the asserts by
wrapping the access inside intel_display_rpm_assert_{block,unblock}().
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Closes: https://lore.kernel.org/r/aG0tWkfmxWtxl_xc@zx2c4.com
Fixes: 8d9908e8fe9c ("drm/i915/display: remove small micro-optimizations in irq handling")
Cc: stable@vger.kernel.org # v6.13+
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250805115656.832235-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit cbd3baeffbc08052ce7dc53f11bf5524b4411056)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
There was a similar bug in the past (Bug 217440), which was fixed for
this laptop.
The same issue is occurring again as of kernel v.6.12.2. The symptoms
are very similar - initially audio works but after a warm reboot, the
audio completely disappears until the computer is powered off (there
is no audio output at all).
The issue is also related by caused by a different change now. By
bisecting different kernel versions, I found that reverting
cc3d0b5dd989 in patch_realtek.c[*] restores the sound and it works
fine after the reboot.
[*] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/sound/pci/hda/patch_realtek.c?h=v6.12.2&id=4ed7f16070a8475c088ff423b2eb11ba15eb89b6
[ patch description reformatted by tiwai ]
Fixes: cc3d0b5dd989 ("ALSA: hda/realtek: Update ALC256 depop procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220109
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/5317ca723c82447a938414fcca85cbf5@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a PCI quirk to enable microphone input on the headphone jack on
the ASUS Zenbook 14 UM3406HA laptop.
This model uses an ALC294 codec with CS35L41 amplifiers over I2C,
and the existing fixup for it did not enable the headset microphone.
A new fix is introduced to get the mic working while keeping the
amplifier settings correct.
Fixes: 61cbc08fdb04 ("ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20250818204243.247297-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ESI/MSI is a performance optimization feature that provides dedicated
interrupts per MCQ hardware queue. This is optional feature and UFS MCQ
should work with and without ESI feature.
Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
brings a regression in ESI (Enhanced System Interrupt) configuration that
causes a null pointer dereference when Platform MSI allocation fails.
The issue occurs in when platform_device_msi_init_and_alloc_irqs() in
ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses
__free() macro for automatic cleanup free MSI resources that were never
successfully allocated.
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
mutex_lock+0xc/0x54 (P)
platform_device_msi_free_irqs_all+0x1c/0x40
ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom]
ufshcd_config_mcq+0x28/0x104
ufshcd_init+0xa3c/0xf40
ufshcd_pltfrm_init+0x504/0x7d4
ufs_qcom_probe+0x20/0x58 [ufs_qcom]
Fix by restructuring the ESI configuration to try MSI allocation first,
before any other resource allocation and instead use explicit cleanup
instead of __free() macro to avoid cleanup of unallocated resources.
Tested on SM8750 platform with MCQ enabled, both with and without
Platform ESI support.
Fixes: e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250811073330.20230-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The name ufshcd_wait_for_doorbell_clr() refers to legacy mode. Commit
8d077ede48c1 ("scsi: ufs: Optimize the command queueing code") added
support for MCQ mode in this function. Since then the name of this
function is misleading. Hence change the name of this function into
something that is appropriate for both legacy and MCQ mode.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_wait_for_dev_cmd() and all its callers can return an OCS error.
OCS errors are represented by positive integers. Remove the WARN_ONCE()
statements that complain about positive error codes and update the
documentation.
Keep the behavior of ufshcd_wait_for_dev_cmd() because this return value
may end be passed as the second argument of bsg_job_done() and
bsg_job_done() handles positive and negative error codes differently.
Cc: Peter Wang <peter.wang@mediatek.com>
Fixes: cc59f3b68542 ("scsi: ufs: core: Improve return value documentation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning.
Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:
WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
(shost->host_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(shost->host_lock);
local_irq_disable();
lock(&hba->clk_gating.lock);
lock(shost->host_lock);
<Interrupt>
lock(&hba->clk_gating.lock);
*** DEADLOCK ***
4 locks held by kworker/u28:0/12:
#0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
#3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104
the shortest dependencies between 2nd lock and 1st lock:
-> (shost->host_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
SOFTIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
... acquired at:
_raw_spin_lock_irqsave+0x5c/0x80
__ufshcd_release+0x78/0x118
ufshcd_send_uic_cmd+0xe4/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
-> (&hba->clk_gating.lock){-...}-{2:2} {
IN-HARDIRQ-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_hold+0x34/0x14c
ufshcd_send_uic_cmd+0x28/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
... acquired at:
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_irq_inversion_bug+0x2fc/0x304
mark_lock_irq+0x388/0x4fc
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs(). The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock. The netdev is already unregistered by
then. Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.
WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
<TASK>
bnxt_remove_one+0x57/0x180 [bnxt_en]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0xa5/0x130
driver_detach+0x42/0x90
bus_remove_driver+0x61/0xc0
pci_unregister_driver+0x38/0x90
bnxt_exit+0xc/0x7d0 [bnxt_en]
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When BCM5325 support was added in c45655386e53 ("net: dsa: b53: add
support for FDB operations on 5325/5365"), the register used for ARL access
was made conditional on the chip.
But in b53_fdb_dump(), instead of the register argument the page
argument was replaced, causing it to write to a reserved page 0x50 on
!BCM5325*. Writing to this page seems to completely lock the switch up:
[ 89.680000] b53-switch spi0.1 lan2: Link is Down
[ 89.680000] WARNING: CPU: 1 PID: 26 at drivers/net/phy/phy.c:1350 _phy_state_machine+0x1bc/0x454
[ 89.720000] phy_check_link_status+0x0/0x114: returned: -5
[ 89.730000] Modules linked in: nft_fib_inet nf_flow_table_inet nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 cls_flower sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact vrf md5 crc32c_cryptoapi
[ 89.780000] CPU: 1 UID: 0 PID: 26 Comm: kworker/u10:0 Tainted: G W 6.16.0-rc1+ #0 NONE
[ 89.780000] Tainted: [W]=WARN
[ 89.780000] Hardware name: Netgear DGND3700 v1
[ 89.780000] Workqueue: events_power_efficient phy_state_machine
[ 89.780000] Stack : 809c762c 8006b050 00000001 820a9ce3 0000114c 000affff 805d22d0 8200ba00
[ 89.780000] 82005000 6576656e 74735f70 6f776572 5f656666 10008b00 820a9cb8 82088700
[ 89.780000] 00000000 00000000 809c762c 820a9a98 00000000 00000000 ffffefff 80a7a76c
[ 89.780000] 80a70000 820a9af8 80a70000 80a70000 80a70000 00000000 809c762c 820a9dd4
[ 89.780000] 00000000 805d1494 80a029e4 80a70000 00000003 00000000 00000004 81a60004
[ 89.780000] ...
[ 89.780000] Call Trace:
[ 89.780000] [<800228b8>] show_stack+0x38/0x118
[ 89.780000] [<8001afc4>] dump_stack_lvl+0x6c/0xac
[ 89.780000] [<80046b90>] __warn+0x9c/0x114
[ 89.780000] [<80046da8>] warn_slowpath_fmt+0x1a0/0x1b0
[ 89.780000] [<805d1494>] _phy_state_machine+0x1bc/0x454
[ 89.780000] [<805d22fc>] phy_state_machine+0x2c/0x70
[ 89.780000] [<80066b08>] process_one_work+0x1e8/0x3e0
[ 89.780000] [<80067a1c>] worker_thread+0x354/0x4e4
[ 89.780000] [<800706cc>] kthread+0x130/0x274
[ 89.780000] [<8001d808>] ret_from_kernel_thread+0x14/0x1c
And any further accesses fail:
[ 120.790000] b53-switch spi0.1: timeout waiting for ARL to finish: 0x81
[ 120.800000] b53-switch spi0.1: port 2 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
[ 121.010000] b53-switch spi0.1: timeout waiting for ARL to finish: 0xbf
[ 121.020000] b53-switch spi0.1: port 3 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
Restore the correct page B53_ARLIO_PAGE again, and move the offset
argument to the correct place.
*On BCM5325, this became a write to the MIB page of Port 1. Still
a reserved offset, but likely less brokenness from that write.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250815201809.549195-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.17-rc
Here are various fixes:
- Patch 1: Better handling SKB extension allocation failures.
A fix for v5.7.
- Patches 2, 3: Avoid resetting MPTCP limits when flushing MPTCP
endpoints. With a validation in the selftests. Fixes for v5.7.
- Patches 4, 5, 6: Disallow '0' as ADD_ADDR retransmission timeout.
With a preparation patch, and a validation in the selftests.
Fixes for v5.11.
- Patches 8, 9: Fix C23 extension warnings in the selftests,
spotted by GCC. Fixes for v6.16.
====================
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-0-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b79a ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_connect.c:187:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
187 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: a862771d1aa4 ("selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-7-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list.
Simplify the code by using a 'goto' statement to eliminate the
duplication.
Note that this is not a fix, but it will help backporting the following
patch. The same "Fixes" tag has been added for this reason.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350d3 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c9c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing Generic Segmentation Offload (GSO) on an IPv6 packet that
contains extension headers, the kernel incorrectly requests checksum offload
if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has
a strict contract: it supports checksum offload only for plain TCP or UDP
over IPv6 and explicitly does not support packets with extension headers.
The current GSO logic violates this contract by failing to disable the feature
for packets with extension headers, such as those used in GREoIPv6 tunnels.
This violation results in the device being asked to perform an operation
it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse
of network throughput. While device TSO/USO is correctly bypassed in favor
of software GSO for these packets, the GSO stack must be explicitly told not
to request checksum offload.
Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4
in gso_features_check if the IPv6 header contains extension headers to compute
checksum in software.
The exception is a BIG TCP extension, which, as stated in commit
68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"):
"The feature is only enabled on devices that support BIG TCP TSO.
The header is only present for PF_PACKET taps like tcpdump,
and not transmitted by physical devices."
kernel log output (truncated):
WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140
...
Call Trace:
<TASK>
skb_checksum_help+0x12a/0x1f0
validate_xmit_skb+0x1a3/0x2d0
validate_xmit_skb_list+0x4f/0x80
sch_direct_xmit+0x1a2/0x380
__dev_xmit_skb+0x242/0x670
__dev_queue_xmit+0x3fc/0x7f0
ip6_finish_output2+0x25e/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel]
ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre]
dev_hard_start_xmit+0x63/0x1c0
__dev_queue_xmit+0x6d0/0x7f0
ip6_finish_output2+0x214/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
inet6_csk_xmit+0xeb/0x150
__tcp_transmit_skb+0x555/0xa80
tcp_write_xmit+0x32a/0xe90
tcp_sendmsg_locked+0x437/0x1110
tcp_sendmsg+0x2f/0x50
...
skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e
skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00
skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00
skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00
skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00
skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00
skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9
skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01
skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a
Fixes: 04c20a9356f283da ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Ramaseuski <jramaseu@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250814105119.1525687-1-jramaseu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051)
Cc: stable@vger.kernel.org
|
|
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6)
Cc: stable@vger.kernel.org
|
|
When getting the number of connectors, the VBIOS reports
the number of valid indices, but it doesn't say which indices
are valid, and not every valid index has an actual connector.
If we don't find a connector on an index, that is not an error.
Considering these are not actual errors, don't litter the logs.
Fixes: 60df5628144b ("drm/amd/display: handle invalid connector indices")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 249d4bc5f1935f04bb45b3b63c0f8922565124f7)
|
|
On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.
This isn't really a problem and it's handled well,
so let's not litter the logs with it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
|
|
dce110_fill_display_configs
Also needed by DCE 6.
This way the code that gathers this info can be shared between
different DCE versions and doesn't have to be repeated.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0)
Cc: stable@vger.kernel.org
|
|
dce110_fill_display_configs
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63)
Cc: stable@vger.kernel.org
|
