summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-11net: dsa: xrs700x: add HSR offloading supportGeorge McCollister
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal forwarding and duplication supported by the xrs7000 series switches. Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR v0 is not). Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: add support for offloading HSRGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hsr: add offloading supportGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hsr: generate supervision frame without HSR/PRP tagGeorge McCollister
For a switch to offload insertion of HSR/PRP tags, frames must not be sent to the CPU facing switch port with a tag. Generate supervision frames (eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on create_tagged_frame which inserts it later. This will allow skipping the tag insertion for all outgoing frames in the future which is required for HSR v1/PRP tag insertions to be offloaded. HSR v0 supervision frames always contain tag information so insertion of the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically notes that this was changed since v0 to allow offloading. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: xrs700x: use of_match_ptr() on xrs700x_mdio_dt_idsGeorge McCollister
Use of_match_ptr() on xrs700x_mdio_dt_ids so that NULL is substituted when CONFIG_OF isn't defined. This will prevent unnecessary use of xrs700x_mdio_dt_ids when CONFIG_OF isn't defined. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: xrs700x: fix unused warning for of_device_idGeorge McCollister
Fix unused variable warning that occurs when CONFIG_OF isn't defined by adding __maybe_unused. >> drivers/net/dsa/xrs700x/xrs700x_i2c.c:127:34: warning: unused variable 'xrs700x_i2c_dt_ids' [-Wunused-const-variable] static const struct of_device_id xrs700x_i2c_dt_ids[] = { Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'tcp-rfc-6056'David S. Miller
Eric Dumazet says: ==================== tcp: RFC 6056 induced changes This is based on a report from David Dworken. First patch implements RFC 6056 3.3.4 proposal. Second patch is adding a little bit of noise to make attacker life a bit harder. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: add some entropy in __inet_hash_connect()Eric Dumazet
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash Port Selection Algorithm), a patient attacker could still be able to collect enough state from an otherwise idle host. Idea of this patch is to inject some noise, in the cases __inet_hash_connect() found a candidate in the first attempt. This noise should not significantly reduce the collision avoidance, and should be zero if connection table is already well used. Note that this is not implementing RFC 6056 3.3.5 because we think Algorithm 5 could hurt typical workloads. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: change source port randomizarion at connect() timeEric Dumazet
RFC 6056 (Recommendations for Transport-Protocol Port Randomization) provides good summary of why source selection needs extra care. David Dworken reminded us that linux implements Algorithm 3 as described in RFC 6056 3.3.3 Quoting David : In the context of the web, this creates an interesting info leak where websites can count how many TCP connections a user's computer is establishing over time. For example, this allows a website to count exactly how many subresources a third party website loaded. This also allows: - Distinguishing between different users behind a VPN based on distinct source port ranges. - Tracking users over time across multiple networks. - Covert communication channels between different browsers/browser profiles running on the same computer - Tracking what applications are running on a computer based on the pattern of how fast source ports are getting incremented. Section 3.3.4 describes an enhancement, that reduces attackers ability to use the basic information currently stored into the shared 'u32 hint'. This change also decreases collision rate when multiple applications need to connect() to different destinations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Revert "net-loopback: set lo dev initial state to UP"Petr Machata
In commit c9dca822c729 ("net-loopback: set lo dev initial state to UP"), linux started automatically bringing up the loopback device of a newly created namespace. However, an existing user script might reasonably have the following stanza when creating a new namespace -- and in fact at least tools/testing/selftests/net/fib_nexthops.sh in Linux's very own testsuite does: # set -e # ip netns add foo # ip -netns foo addr add 127.0.0.1/8 dev lo # ip -netns foo link set lo up # set +e This will now fail, because the kernel reasonably rejects "ip addr add" of a duplicate address. The described change of behavior therefore constitutes a breakage. Revert it. Fixes: c9dca822c729 ("net-loopback: set lo dev initial state to UP") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: introduce phydev->portMichael Walle
At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11devlink: Fix dmac_filter trap name, align to its documentationAya Levin
%s/dest_mac_filter/dmac_filter/g Fixes: e78ab164591f ("devlink: Add DMAC filter generic packet trap") Signed-off-by: Aya Levin <ayal@nvidia.com> Reported-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'ibmvnic-coding-style'David S. Miller
Lijun Pan says: ==================== ibmvnic: a set of fixes of coding style This series address several coding style problems. v2: rebased on top of tree. Add the Reviewed-by tag from v1 reviews. patch 8/8 is new. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer strscpy over strlcpyLijun Pan
Fix this warning: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: remove unused spinlock_t stats_lock definitionLijun Pan
stats_lock is no longer used. So remove it. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: add comments for spinlock_t definitionsLijun Pan
There are several spinlock_t definitions without comments. Add them. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix miscellaneous checksLijun Pan
Fix the following checkpatch checks: CHECK: Macro argument 'off' may be better as '(off)' to avoid precedence issues CHECK: Alignment should match open parenthesis CHECK: multiple assignments should be avoided CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Unnecessary parentheses around 'rc != H_FUNCTION' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: avoid multiple line dereferenceLijun Pan
Fix the following checkpatch warning: WARNING: Avoid multiple line dereference Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix bracesLijun Pan
Fix the following checkpatch warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix block commentsLijun Pan
Fix the following checkpatch warning: WARNING: networking block comments don't use an empty /* line, use /* Comment... Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer 'unsigned long' over 'unsigned long int'Lijun Pan
Fix the following checkpatch warnings: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary WARNING: Prefer 'long' over 'long int' as the int is unnecessary Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-02-10 This series contains updates to i40e driver only. Arkadiusz adds support for software controlled DCB. Upon disabling of the firmware LLDP agent, the driver configures DCB with default values (only one Traffic Class). At the same time, it allows a software based LLDP agent - userspace application i.e. lldpad) to receive DCB TLVs and set desired DCB configuration through DCB related netlink callbacks. Aleksandr implements get and set ethtool ops for Energy Efficient Ethernet. Przemyslaw extends support for ntuple filters allowing for Flow Director IPv6 and VLAN filters. Kaixu Xia removes an unneeded assignment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mvpp2: add an entry to skip parserStefan Chulski
This entry used when skipping the parser needed, for example, the custom header pretended to ethernet header. Suggested-by: Liron Himi <liron@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10rxrpc: Fix missing dependency on NET_UDP_TUNNELDavid Howells
The changes to make rxrpc create the udp socket missed a bit to add the Kconfig dependency on the udp tunnel code to do this. Fix this by adding making AF_RXRPC select NET_UDP_TUNNEL. Fixes: 1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> cc: alaa@dev.mellanox.co.il cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge branch 'octeon-ethtool'David S. Miller
Hariprasad Kelam says: ==================== ethtool support for fec and link configuration This series of patches add support for forward error correction(fec) and physical link configuration. Patches 1&2 adds necessary mbox handlers for fec mode configuration request and to fetch stats. Patch 3 registers driver callbacks for fec mode configuration and display. Patch 4&5 adds support of mbox handlers for configuring link parameters like speed/duplex and autoneg etc. Patche 6&7 registers driver callbacks for physical link configuration. Change-log: v2: - Fixed review comments - Corrected indentation issues - Return -ENOMEM incase of mbox allocation failure - added validation for input fecparams bitmask values - added more comments V3: - Removed inline functions - Make use of ethtool helpers APIs to display supported advertised modes - corrected indentation issues - code changes such that return early in case of failure to aid branch prediction v4: - Corrected indentation issues - Use FEC_OFF if user requests for FEC_AUTO mode - Do not clear fec stats in case of user changes fec mode - dont hide fec stats depending on interface mode selection ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link configurationChristina Jacob
Register set_link_ksetting callback with driver such that link configurations parameters like advertised mode,speed, duplex and autoneg can be configured. below command ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link statusChristina Jacob
Register get_link_ksettings callback to get link status information from the driver. As virtual function (vf) shares same physical link same API is used for both the drivers and for loop back drivers simply returns the fixed values as its does not have physical link. ethtool eth3 Settings for eth3: Supported ports: [ ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full 10000baseKR/Full 1000baseX/Full Supports auto-negotiation: No Supported FEC modes: BaseR RS Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: None ethtool lbk0 Settings for lbk0: Speed: 100000Mb/s Duplex: Full Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: advertised link modes support on cgxChristina Jacob
CGX supports setting advertised link modes on physical link. This patch adds support to derive cgx mode from ethtool link mode and pass it to firmware to configure the same. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Physical link configuration supportChristina Jacob
CGX LMAC, the physical interface support link configuration parameters like speed, auto negotiation, duplex etc. Firmware saves these into memory region shared between firmware and this driver. This patch adds mailbox handler set_link_mode, fw_data_get to configure and read these parameters. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool fec mode supportChristina Jacob
Add ethtool support to configure fec modes baser/rs and support to fecth FEC stats from CGX as well PHY. Configure fec mode - ethtool --set-fec eth0 encoding rs/baser/off/auto Query fec mode - ethtool --show-fec eth0 Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Add new CGX_CMD to get PHY FEC statisticsFelix Manlunas
This patch adds support to fetch fec stats from PHY. The stats are put in the shared data struct fwdata. A PHY driver indicates that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync with firmware's enum list. Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: forward error correction configurationChristina Jacob
CGX block supports forward error correction modes baseR and RS. This patch adds support to set encoding mode and to read corrected/uncorrected block counters Adds new mailbox handlers set_fec to configure encoding modes and fec_stats to read counters and also increase mbox timeout to accomdate firmware command response timeout. Along with new CGX_CMD_SET_FEC command add other commands to sync with kernel enum list with firmware. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: octeontx2: Fix the confusion in buffer alloc failure pathKevin Hao
Pavel pointed that the return of dma_addr_t in otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative error code may be returned in some cases. For a dma_addr_t, the error code such as -ENOMEM does seem a valid value, so we can't judge if the buffer allocation fail or not based on that value. Add a parameter for otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make the return value to indicate if the buffer allocation really fail or not. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge branch 'Add-MBIM-over-MHI-support'David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add mbim protoLoic Poulain
MBIM has initially been specified by USB-IF for transporting data (IP) between a modem and a host over USB. However some modern modems also support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it allows to aggregate IP packets and to perform context multiplexing. This change adds minimal MBIM data transport support to MHI, allowing to support MBIM only modems. MBIM being based on USB NCM, it reuses and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim). Note that is a subset of the CDC-MBIM specification, supporting only transport of network data (IP), there is no support for DSS. Moreover the multi-session (for multi-pdn) is not supported in this initial version, but will be added latter, and aligned with the cdc-mbim solution (VLAN tags). This code has been inspired from the mhi_mbim downstream implementation (Carl Yin <carl.yin@quectel.com>). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add rx_length_errors statLoic Poulain
This can be used by proto when packet len is incorrect. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Create mhi.hLoic Poulain
Move mhi-net shared structures to mhi header, that will be used by upcoming proto(s). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add dedicated folderLoic Poulain
Create a dedicated mhi directory for mhi-net, mhi-net is going to be split into differente files (for additional protocol support). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add protocol supportLoic Poulain
MHI can transport different protocols, some are handled at upper level, like IP and QMAP(rmnet/netlink), but others will need to be inside MHI net driver, like mbim. This change adds support for protocol rx and tx_fixup callbacks registration, that can be used to encode/decode the targeted protocol. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10cxgb4: collect serial config version from registerRahul Lakkireddy
Collect serial config version information directly from an internal register, instead of explicitly resizing VPD. v2: - Add comments on info stored in PCIE_STATIC_SPARE2 register. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10i40e: remove the useless value assignment in i40e_clean_adminq_subtaskKaixu Xia
The variable ret is overwritten by the following call i40e_clean_arq_element() and the assignment is useless, so remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: VLAN field for flow directorPrzemyslaw Patynowski
Allow user to specify VLAN field and add it to flow director. Show VLAN field in "ethtool -n ethx" command. Handle VLAN type and tag field provided by ethtool command. Refactored filter addition, by replacing static arrays with runtime dummy packet creation, which allows specifying VLAN field. Previously, VLAN field was omitted. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add flow director support for IPv6Przemyslaw Patynowski
Flow director for IPv6 is not supported. 1) Implementation of support for IPv6 flow director. 2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6. 3) Refactored legacy code to make it more generic. 4) Added packet templates for TCP6, UDP6, SCTP6, IPv6. 5) Added handling of IPv6 source and destination address for flow director. 6) Improved argument passing for source and destination portin TCP6, UDP6 and SCTP6. 7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6. 8) Used correct bit flag regarding FLEXOFF field of flow director data descriptor. Without this patch, there would be no support for flow director on IPv6, TCP6, UDP6, SCTP6. Tested based on x710 datasheet by using: ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1 ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2 ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3 ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4 ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5 ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6 ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7 ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8 Then send traffic from client which matches the criteria provided to ethtool. Observe that packets are redirected to user set queues with ethtool -S <interface> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add EEE status getting & setting implementationAleksandr Loktionov
Implement Energy Efficient Ethernet (EEE) status getting & setting. The i40e_get_eee() requesting PHY EEE capabilities from firmware. The i40e_set_eee() function requests PHY EEE capabilities from firmware and sets PHY EEE advertising to full abilities or 0 depending whether EEE is to be enabled or disabled. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add netlink callbacks support for software based DCBArkadiusz Kubalewski
Add callbacks used by software based LLDP agent, which allows to configure DCB feature from userspace. Update copyright dates as appropriate. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initialized DCB functionality with default values, one traffic class with 100% bandwidth allocated. The new netlink callbacks are required for software LLDP agent, it must be able to acquire current DCB configuration of a network port and apply DCB configuration changes, if required. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add init and default config of software based DCBArkadiusz Kubalewski
Add extra handling on changing the "disable-fw-lldp" private flag to properly initialize software based DCB feature. Add default configuration of DCB functionality when Firmware LLDP agent is turned off, in case of driver probe and device reset on reconfiguration. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. Default configuration and new initialization flow for software based DCB is required. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initializes DCB functionality with default values, one traffic class with 100% bandwidth allocated. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add hardware configuration for software based DCBArkadiusz Kubalewski
Add registers and definitions required for applying DCB related hardware configuration. Add functions responsible for calculating and setting proper hardware configuration values for software based DCB functionality. Add function responsible for invoking Admin Queue command, which results in applying new DCB configuration to the hardware. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. New communication channel between software and hardware is required for software driver. It must be able to calculate and configure all the registers related for DCB feature. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-10Merge tag 'pm-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Address a performance regression related to scale-invariance on x86 that may prevent turbo CPU frequencies from being used in certain workloads on systems using acpi-cpufreq as the CPU performance scaling driver and schedutil as the scaling governor" * tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there cpufreq: ACPI: Extend frequency tables to cover boost frequencies
2021-02-10Merge tag 'acpi-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a problematic ACPICA commit that changed the code to attempt to update memory regions which may be read-only on some systems (Ard Biesheuvel)" * tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
generated by cgit (git 2.34.1) at 2025-09-19 14:34:56 +0000