| Age | Commit message (Collapse) | Author |
|---|
|
IPv6 addresses are huge so the device has 4 TCAMs used for narrowing
them down to a smaller key before the main match / action engine.
Add the tables in which we'll keep the IP addresses used by
ethtool n-tuple rules. Add the code for programming them
into the device, and code for allocating and freeing entries.
A bit of copy / paste here as we need to support IPv4 and
IPv6 in the same tables, and there is four of them.
But it makes the code easier to match up with the device.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20250206235334.1425329-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for an extra RSS context. The device has a primary
and a secondary context.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250206235334.1425329-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that adding Rx flow steering rules pointing to an RSS
context which does not exist is prevented.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250206235334.1425329-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 42dc431f5d0e ("ethtool: rss: prevent rss ctx deletion
when in use") we prevent removal of RSS contexts pointed to by
existing flow rules. Core should also prevent creation of rules
which point to RSS context which don't exist in the first place.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250206235334.1425329-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
netconsole: Add support for CPU population
The current implementation of netconsole sends all log messages in
parallel, which can lead to an intermixed and interleaved output on the
receiving side. This makes it challenging to demultiplex the messages
and attribute them to their originating CPUs.
As a result, users and developers often struggle to effectively analyze
and debug the parallel log output received through netconsole.
Example of a message got from produciton hosts:
------------[ cut here ]------------
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0
Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E)
This series of patches introduces a new feature to the netconsole
subsystem that allows the automatic population of the CPU number in the
userdata field for each log message. This enhancement provides several
benefits:
* Improved demultiplexing of parallel log output: When multiple CPUs are
sending messages concurrently, the added CPU number in the userdata
makes it easier to differentiate and attribute the messages to their
originating CPUs.
* Better visibility into message sources: The CPU number information
gives users and developers more insight into which specific CPU a
particular log message came from, which can be valuable for debugging
and analysis.
The changes in this series are as follows Patches::
Patch "consolidate send buffers into netconsole_target struct"
=================================================
Move the static buffers to netconsole target, from static declaration
in send_msg_no_fragmentation() and send_msg_fragmented().
Patch "netconsole: Rename userdata to extradata"
=================================================
Create the a concept of extradata, which encompasses the concept of
userdata and the upcoming sysdatao
Sysdata is a new concept being added, which is basically fields that are
populated by the kernel. At this time only the CPU#, but, there is a
desire to add current task name, kernel release version, etc.
Patch "netconsole: Helper to count number of used entries"
===========================================================
Create a simple helper to count number of entries in extradata. I am
separating this in a function since it will need to count userdata and
sysdata. For instance, when the user adds an extra userdata, we need to
check if there is space, counting the previous data entries (from
userdata and cpu data)
Patch "Introduce configfs helpers for sysdata features"
======================================================
Create the concept of sysdata feature in the netconsole target, and
create the configfs helpers to enable the bit in nt->sysdata
Patch "Include sysdata in extradata entry count"
================================================
Add the concept of sysdata when counting for available space in the
buffer. This will protect users from creating new userdata/sysdata if
there is no more space
Patch "netconsole: add support for sysdata and CPU population"
===============================================================
This is the core patch. Basically add a new option to enable automatic
CPU number population in the netconsole userdata Provides a new "cpu_nr"
sysfs attribute to control this feature
Patch "netconsole: selftest: test CPU number auto-population"
=============================================================
Expands the existing netconsole selftest to verify the CPU number
auto-population functionality Ensures the received netconsole messages
contain the expected "cpu=<CPU>" entry in the message. Test different
permutation with userdata
Patch "netconsole: docs: Add documentation for CPU number auto-population"
=============================================================================
Updates the netconsole documentation to explain the new CPU number
auto-population feature Provides instructions on how to enable and use
the feature
I believe these changes will be a valuable addition to the netconsole
subsystem, enhancing its usefulness for kernel developers and users.
PS: This patchset is on top of the patch that created
netcons_fragmented_msg selftest:
https://lore.kernel.org/all/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org/
---
Changes in v5:
- Fixed a kernel doc syntax syntax (Simon)
- Link to v4: https://lore.kernel.org/r/20250204-netcon_cpu-v4-0-9480266ef556@debian.org
Changes in v4:
- Fixed Kernel doc for netconsole_target (Simon)
- Fixed a typo in disable_sysdata_feature (Simon)
- Improved sysdata_cpu_nr_show() to return !! in a bit-wise operation
- Link to v3: https://lore.kernel.org/r/20250124-netcon_cpu-v3-0-12a0d286ba1d@debian.org
Changes in v3:
- Moved the buffer into netconsole_target, avoiding static functions in
the send path (Jakub).
- Fix a documentation error (Randy Dunlap)
- Created a function that handle all the extradata, consolidating it in
a single place (Jakub)
- Split the patch even more, trying to simplify the review.
- Link to v2: https://lore.kernel.org/r/20250115-netcon_cpu-v2-0-95971b44dc56@debian.org
Changes in v2:
- Create the concept of extradata and sysdata. This will make the design
easier to understand, and the code easier to read.
* Basically extradata encompasses userdata and the new sysdata.
Userdata originates from user, and sysdata originates in kernel.
- Improved the test to send from a very specific CPU, which can be
checked to be correct on the other side, as suggested by Jakub.
- Fixed a bug where CPU # was populated at the wrong place
- Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org
====================
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the netconsole documentation to explain the new feature that
allows automatic population of the CPU number.
The key changes include introducing a new section titled "CPU number
auto population in userdata", explaining how to enable the CPU number
auto-population feature by writing to the "populate_cpu_nr" file in the
netconsole configfs hierarchy.
This documentation update ensures users are aware of the new CPU number
auto-population functionality and how to leverage it for better
demultiplexing and visibility of parallel netconsole output.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add infrastructure to automatically append kernel-generated data (sysdata)
to netconsole messages. As the first use case, implement CPU number
population, which adds the CPU that sent the message.
This change introduces three distinct data types:
- extradata: The complete set of appended data (sysdata + userdata)
- userdata: User-provided key-value pairs from userspace
- sysdata: Kernel-populated data (e.g. cpu=XX)
The implementation adds a new configfs attribute 'cpu_nr' to control CPU
number population per target. When enabled, each message is tagged with
its originating CPU. The sysdata is dynamically updated at message time
and appended after any existing userdata.
The CPU number is formatted as "cpu=XX" and is added to the extradata
buffer, respecting the existing size limits.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify count_extradata_entries() to include sysdata fields when
calculating the total number of extradata entries. This change ensures
that the sysdata feature, specifically the CPU number field, is
correctly counted against the MAX_EXTRADATA_ITEMS limit.
The modification adds a simple check for the CPU_NR flag in the
sysdata_fields, incrementing the entry count accordingly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a bitfield to store sysdata features in the
netconsole_target struct. It also adds configfs helpers to enable
or disable the CPU_NR feature, which populates the CPU number in
sysdata.
The patch provides the necessary infrastructure to set or unset the
CPU_NR feature, but does not modify the message itself.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper function nr_extradata_entries() to count the number of used
extradata entries in a netconsole target. This refactors the duplicate
code for counting entries into a single function, which will be reused
by upcoming CPU sysdata changes.
The helper uses list_count_nodes() to count the number of children in
the userdata group configfs hierarchy.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename "userdata" to "extradata" since this structure will hold both
user and system data in future patches. Keep "userdata" term only for
data that comes from userspace (configfs), while "extradata" encompasses
both userdata and future kerneldata.
These are the rules of the design
1. extradata_complete will hold userdata and sysdata (coming)
2. sysdata will come after userdata_length
3. extradata_complete[userdata_length] string will be replaced at every
message
5. userdata is replaced when configfs changes (update_userdata())
6. sysdata is replaced at every message
Example:
extradata_complete = "userkey=uservalue cpu=42"
userdata_length = 17
sysdata_length = 7 (space (" ") is part of sysdata)
Since sysdata is still not available, you will see the following in the
send functions:
extradata_len = nt->userdata_length;
The upcoming patches will, which will add support for sysdata, will
change it to:
extradata_len = nt->userdata_length + sysdata_len;
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the static buffers from send_msg_no_fragmentation() and
send_msg_fragmented() into the netconsole_target structure. This
simplifies the code by:
- Eliminating redundant static buffers
- Centralizing buffer management in the target structure
- Reducing memory usage by 1KB (one buffer instead of two)
The buffer in netconsole_target is protected by target_list_lock,
maintaining the same synchronization semantics as the original code.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.
Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.
Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.
Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded.
Fixes: 199112327135 ("iommu: Track iopf group instead of last fault")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250117055800.782462-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The conditional involving sdev->first_boot in acp_sof_ipc_irq_thread()
will succeed only once, i.e. during the very first run of the
DSP firmware.
Use the unlikely() annotation to help improve branch prediction
accuracy.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-4-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some cases, e.g. during resuming from suspend, there is a possibility
that some IPC reply messages get received by the host while the DSP
firmware has not yet reached the complete boot state.
Detect when this happens and do not attempt to process the unexpected
replies from DSP. Instead, provide proper debugging support.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-3-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove all the includes for headers which are not (directly) used from
the Vangogh SOF driver sources.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-2-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stress testing resume from suspend on Valve Steam Deck OLED (Galileo)
revealed that the DSP firmware could enter an unrecoverable faulty
state, where the kernel ring buffer is flooded with IPC related error
messages:
[ +0.017002] snd_sof_amd_vangogh 0000:04:00.5: acp_sof_ipc_send_msg: Failed to acquire HW lock
[ +0.000054] snd_sof_amd_vangogh 0000:04:00.5: ipc3_tx_msg_unlocked: ipc message send for 0x30100000 failed: -22
[ +0.000005] snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
[ +0.000004] snd_sof_amd_vangogh 0000:04:00.5: Failed to restore pipeline after resume -22
[ +0.000003] snd_sof_amd_vangogh 0000:04:00.5: PM: dpm_run_callback(): pci_pm_resume returns -22
[ +0.000009] snd_sof_amd_vangogh 0000:04:00.5: PM: failed to resume async: error -22
[...]
[ +0.002582] PM: suspend exit
[ +0.065085] snd_sof_amd_vangogh 0000:04:00.5: ipc tx error for 0x30130000 (msg/reply size: 12/0): -22
[ +0.000499] snd_sof_amd_vangogh 0000:04:00.5: error: failed widget list set up for pcm 1 dir 0
[ +0.000011] snd_sof_amd_vangogh 0000:04:00.5: error: set pcm hw_params after resume
[ +0.000006] snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_pcm_component_prepare on 0000:04:00.5: -22
[...]
A system reboot would be necessary to restore the speakers
functionality.
However, by delaying a bit any host to DSP transmission right after
the firmware boot completed, the issue could not be reproduced anymore
and sound continued to work flawlessly even after performing thousands
of suspend/resume cycles.
Introduce the post_fw_run_delay ACP quirk to allow providing the
aforementioned delay via the snd_sof_dsp_ops->post_fw_run() callback for
the affected devices.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-1-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/lnl/ptl
Fixes: a7ebb0255188 ("ASoC: Intel: soc-acpi-intel-ptl-match: add rt713_vb_l2_rt1320_l13 support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250210031954.6287-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/lnl/ptl
Fixes: bd40d912728f ("ASoC: Intel: soc-acpi-intel-ptl-match: add rt712_vb + rt1320 support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250210031954.6287-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Don't use an uninitialised stack variable, and just return 0
on the non-error path.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502100911.8c9DbtKD-lkp@intel.com/
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://patch.msgid.link/598031332ce738c82286a158cb66eb7e735b2e79.1738746904.git.namcao@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add Intel PTL-H audio Device ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-5-peter.ujfalusi@linux.intel.com
|
|
PTL-H uses the same configuration as PTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-4-peter.ujfalusi@linux.intel.com
|
|
Use same recipes as PTL for PTL-H.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-3-peter.ujfalusi@linux.intel.com
|
|
Add Intel PTL-H audio Device ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-2-peter.ujfalusi@linux.intel.com
|
|
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/
Fixes: ff31e105464d ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu
|
|
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b42 ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space. Because it is not in kernel address space it is
not covered by KASAN shadow memory. Since commit e4137f08816b ("mm,
kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports
bad accesses from copy_to_kernel_nofault(). Here a bad access to user
memory is reported because KASAN detects the lack of shadow memory and
the address is below TASK_SIZE.
Do like x86 in commit b3fd8e83ada0 ("x86/alternatives: Use temporary
mm for text poking") and disable KASAN reports during patching when
using temporary mm.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Close: https://lore.kernel.org/all/20250201151435.48400261@yea/
Fixes: 465cabc97b42 ("powerpc/code-patching: introduce patch_instructions()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
|
|
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
|
|
When the handling of a guest stage-2 permission fault races with an MMU
notifier, the faulting page might be gone from the guest's stage-2 by
the point we attempt to call (p)kvm_pgtable_stage2_relax_perms(). In the
normal KVM case, this leads to returning -EAGAIN which user_mem_abort()
handles correctly by simply re-entering the guest. However, the pKVM
hypercall implementation has additional logic to check the page state
using __check_host_shared_guest() which gets confused with absence of a
page mapped at the requested IPA and returns -ENOENT, hence breaking
user_mem_abort() and hilarity ensues.
Luckily, several of the hypercalls for managing the stage-2 page-table
of NP guests have no effect on the pKVM ownership tracking (wrprotect,
test_clear_young, mkyoung, and crucially relax_perms), so the extra
state checking logic is in fact not strictly necessary. So, to fix the
discrepancy between standard KVM and pKVM, let's just drop the
superfluous __check_host_shared_guest() logic from those hypercalls and
make the extra state checking a debug assertion dependent on
CONFIG_NVHE_EL2_DEBUG as we already do for other transitions.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250207145438.1333475-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The check_host_shared_guest() path expects to find a last-level valid
PTE in the guest's stage-2 page-table. However, it checks the PTE's
level before its validity, which makes it hard for callers to figure out
what went wrong.
To make error handling simpler, check the PTE's validity first.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250207145438.1333475-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A dispatch operation that can target a specific local DSQ -
scx_bpf_dsq_move_to_local() or scx_bpf_dsq_move() - checks whether the task
can be migrated to the target CPU using task_can_run_on_remote_rq(). If the
task can't be migrated to the targeted CPU, it is bounced through a global
DSQ.
task_can_run_on_remote_rq() assumes that the task is on a CPU that's
different from the targeted CPU but the callers doesn't uphold the
assumption and may call the function when the task is already on the target
CPU. When such task has migration disabled, task_can_run_on_remote_rq() ends
up returning %false incorrectly unnecessarily bouncing the task to a global
DSQ.
Fix it by updating the callers to only call task_can_run_on_remote_rq() when
the task is on a different CPU than the target CPU. As this is a bit subtle,
for clarity and documentation:
- Make task_can_run_on_remote_rq() trigger SCHED_WARN_ON() if the task is on
the same CPU as the target CPU.
- is_migration_disabled() test in task_can_run_on_remote_rq() cannot trigger
if the task is on a different CPU than the target CPU as the preceding
task_allowed_on_cpu() test should fail beforehand. Convert the test into
SCHED_WARN_ON().
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Fixes: 0366017e0973 ("sched_ext: Use task_can_run_on_remote_rq() test in dispatch_to_local_dsq()")
Cc: stable@vger.kernel.org # v6.12+
|
|
Migration disabled tasks are special and pinned to their previous CPUs. They
tripped up some unsuspecting BPF schedulers as their ->nr_cpus_allowed may
not agree with the bits set in ->cpus_ptr. Make it easier for BPF schedulers
by automatically dispatching them to the pinned local DSQs by default. If a
BPF scheduler wants to handle migration disabled tasks explicitly, it can
set SCX_OPS_ENQ_MIGRATION_DISABLED.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
|
|
Without the DP helper code, the newly added displayport support
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.o: in function `hibmc_dp_aux_init':
dp_aux.c:(.text+0x37e): undefined reference to `drm_dp_aux_init'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_set_pattern':
dp_link.c:(.text+0xae): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_get_adjust_train':
dp_link.c:(.text+0x121): undefined reference to `drm_dp_get_adjust_request_voltage'
x86_64-linux-ld: dp_link.c:(.text+0x12e): undefined reference to `drm_dp_get_adjust_request_pre_emphasis'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_training':
dp_link.c:(.text+0x2b0): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: dp_link.c:(.text+0x2e3): undefined reference to `drm_dp_dpcd_write'
Add both DRM_DISPLAY_DP_HELPER and DRM_DISPLAY_HELPER, which is
in turn required by the former.
Fixes: 0ab6ea261c1f ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127071059.617567-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This is an alpha-specific fix, but since it touched ELF I was asked to
carry it.
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
support (Eric W. Biederman)"
* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla1280: Fix kernel oops when debug level > 2
scsi: ufs: core: Fix error return with query response
scsi: storvsc: Set correct data length for sending SCSI command without payload
scsi: ufs: core: Fix use-after free in init error and remove paths
scsi: core: Do not retry I/Os during depopulation
scsi: core: Use GFP_NOIO to avoid circular locking dependency
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
scsi: ufs: core: Simplify temperature exception event handling
scsi: target: core: Add line break to status show
scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions
scsi: core: Add passthrough tests for success and no failure definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c reverts from Wolfram Sang:
"It turned out the new mechanism for handling created devices does not
handle all muxing cases.
Revert the changes to give a proper solution more time"
* tag 'i2c-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: Replace list-based mechanism for handling auto-detected clients"
Revert "i2c: Replace list-based mechanism for handling userspace-created clients"
|
|
Pull rust fixes from Miguel Ojeda:
- Do not export KASAN ODR symbols to avoid gendwarfksyms warnings
- Fix future Rust 1.86.0 (to be released 2025-04-03) x86_64 builds
- Clean future Rust 1.86.0 (to be released 2025-04-03) warning
- Fix future GCC 15 (to be released in a few months) builds
- Fix `rusttest` target in macOS
* tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux:
x86: rust: set rustc-abi=x86-softfloat on rustc>=1.86.0
rust: kbuild: do not export generated KASAN ODR symbols
rust: kbuild: add -fzero-init-padding-bits to bindgen_skip_cflags
rust: init: use explicit ABI to clean warning in future compilers
rust: kbuild: use host dylib naming in rusttestlib-kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
"Function graph fix of notrace functions.
When the function graph tracer was restructured to use the global
section of the meta data in the shadow stack, the bit logic was
changed. There's a TRACE_GRAPH_NOTRACE_BIT that is the bit number in
the mask that tells if the function graph tracer is currently in the
"notrace" mode. The TRACE_GRAPH_NOTRACE is the mask with that bit set.
But when the code we restructured, the TRACE_GRAPH_NOTRACE_BIT was
used when it should have been the TRACE_GRAPH_NOTRACE mask. This made
notrace not work properly"
* tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a build regression on GCC 15 builds, caused by GCC changing the
default C version that is overriden in the main Makefile but not in
the x86 boot code Makefile"
* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use '-std=gnu11' to fix build with GCC 15
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix a PREEMPT_RT bug in the clocksource verification code that caused
false positive warnings.
Also fix a timer migration setup bug when new CPUs are added"
* tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix off-by-one root mis-connection
clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a cfs_rq->h_nr_runnable accounting bug that trips up a defensive
SCHED_WARN_ON() on certain workloads. The bug is believed to be
(accidentally) self-correcting, hence no behavioral side effects are
expected.
Also print se.slice in debug output, since this value can now be set
via the syscall ABI and can be useful to track"
* tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Provide slice length for fair tasks
sched/fair: Fix inaccurate h_nr_runnable accounting with delayed dequeue
|
