summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-10drm/meson: fix debug log statement when setting the HDMI clocksMartin Blumenstingl
The "phy" and "vclk" frequency labels were swapped, making it more difficult to debug driver errors. Swap the label order to make them match with the actual frequencies printed to correct this. Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250606203729.3311592-1-martin.blumenstingl@googlemail.com
2025-06-10ata: libata-acpi: Do not assume 40 wire cable if no devices are enabledTasos Sahanidis
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices have not yet been enabled by the first time ata_acpi_cbl_80wire() is called. This means that the ata_for_each_dev loop is never entered, and a 40 wire cable is assumed. The VIA controller on this board does not report the cable in the PCI config space, thus having to fall back to ACPI even though no SATA bridge is present. The _GTM values are correctly reported by the firmware through ACPI, which has already set up faster transfer modes, but due to the above the controller is forced down to a maximum of UDMA/33. Resolve this by modifying ata_acpi_cbl_80wire() to directly return the cable type. First, an unknown cable is assumed which preserves the mode set by the firmware, and then on subsequent calls when the devices have been enabled, an 80 wire cable is correctly detected. Since the function now directly returns the cable type, it is renamed to ata_acpi_cbl_pata_type(). Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-10ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330Tasos Sahanidis
The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on WinXP, although it requires more attempts to cause it. The hang in that case is also resolved by forcing PIO. It doesn't appear that VIA has produced any drivers for that OS, thus no known workaround exists. HDDs attached to the controller do not suffer from any DMA issues. Cc: stable@vger.kernel.org Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916677 Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085508.1398701-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-10ASoC: sdw_utils: Fix potential NULL pointer deref in is_sdca_endpoint_present()Thorsten Blum
Check the return value of kzalloc() and exit early to avoid a potential NULL pointer dereference. Cc: stable@vger.kernel.org Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250610103225.1475-2-thorsten.blum@linux.dev Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-10cpufreq: Convert `/// SAFETY` lines to `# Safety` sectionsViresh Kumar
Replace `/// SAFETY` comments in doc comments with proper `# Safety` sections, as per rustdoc conventions. Also mark the C FFI callbacks as `unsafe` to correctly reflect their safety requirements. Reported-by: Miguel Ojeda <ojeda@kernel.org> Closes: https://github.com/Rust-for-Linux/linux/issues/1169 Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2025-06-10drm/vc4: fix infinite EPROBE_DEFER loopGabriel Dalimonte
`vc4_hdmi_audio_init` calls `devm_snd_dmaengine_pcm_register` which may return EPROBE_DEFER. Calling `drm_connector_hdmi_audio_init` adds a child device. The driver model docs[1] state that adding a child device prior to returning EPROBE_DEFER may result in an infinite loop. [1] https://www.kernel.org/doc/html/v6.14/driver-api/driver-model/driver.html Fixes: 9640f1437a88 ("drm/vc4: hdmi: switch to using generic HDMI Codec infrastructure") Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com> Link: https://lore.kernel.org/r/20250601-vc4-audio-inf-probe-v2-1-9ad43c7b6147@gmail.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-10MAINTAINERS: Update HiSilicon GPIO driver maintainerYang Shen
Add Yang Shen as the maintainer of the HiSilicon GPIO driver, replacing Jay Fang. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/20250529034023.3780376-1-shenyang39@huawei.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-06-10MAINTAINERS: .mailmap: Update Hans de Goede's email addressHans de Goede
I'm moving all my kernel work over to using my kernel.org email address. Update .mailmap and MAINTAINER entries still using hdegoede@redhat.com. Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250609143558.42941-2-hansg@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Bump versionStuart Hayes
Bump the module version. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Stop overwriting data bufferStuart Hayes
The dell_rbu driver will use memset() to clear the data held by each packet when it is no longer needed (when the driver is unloaded, the packet size is changed, etc). The amount of memory that is cleared (before this patch) is the normal packet size. However, the last packet in the list may be smaller. Fix this to only clear the memory actually used by each packet, to prevent it from writing past the end of data buffer. Because the packet data buffers are allocated with __get_free_pages() (in page-sized increments), this bug could only result in a buffer being overwritten when a packet size larger than one page is used. The only user of the dell_rbu module should be the Dell BIOS update program, which uses a packet size of 4096, so no issues should be seen without the patch, it just blocks the possiblity. Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix list usageStuart Hayes
Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix lock context warningStuart Hayes
Fix a sparse lock context warning. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc()Mario Limonciello
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder but this isn't actually needed because work is only scheduled in amd_pmf_start_policy_engine() and with device managed cleanups pointers for allocations don't need to be freed. Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for the cases that need to clean up. Cc: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twiceMario Limonciello
If any of the tee init fails, pass up the errors and clear the tee_ctx pointer. This will prevent cleaning up multiple times. Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Use device managed allocationsMario Limonciello
If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10ALSA: sb: Force to disable DMAs once when DMA mode is changedTakashi Iwai
When the DMA mode is changed on the (still real!) SB AWE32 after playing a stream and closing, the previous DMA setup was still silently kept, and it can confuse the hardware, resulting in the unexpected noises. As a workaround, enforce the disablement of DMA setups when the DMA setup is changed by the kcontrol. https://bugzilla.kernel.org/show_bug.cgi?id=218185 Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-10ALSA: sb: Don't allow changing the DMA mode during operationsTakashi Iwai
When a PCM stream is already running, one shouldn't change the DMA mode via kcontrol, which may screw up the hardware. Return -EBUSY instead. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218185 Link: https://patch.msgid.link/20250610064322.26787-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-10ALSA: hda/realtek: Add quirk for Asus GU605CRichard Fitzgerald
The GU605C has similar audio hardware to the GU605M so apply the same quirk. Note that in the linked bugzilla there are two separate problems with the GU605C. This patch fixes one of the problems, so I haven't added a Closes: tag. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reported-by: Nick Karaolidis <nick@karaolidis.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=220152 Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250609102125.63196-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-10ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X513EAChris Chiu
The built-in mic of ASUS VivoBook X513EA is broken recently by the fix of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working for addressing the regression, too. Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250610035607.690771-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09Merge tag 'powerpc-6.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - a couple of fixes for out of bounds issues in memtrace and vas Thanks to Ritesh Harjani (IBM), Haren Myneni, and Jonathan Greental * tag 'powerpc-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vas: Return -EINVAL if the offset is non-zero in mmap() powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmap
2025-06-10powerpc/vas: Return -EINVAL if the offset is non-zero in mmap()Haren Myneni
The user space calls mmap() to map VAS window paste address and the kernel returns the complete mapped page for each window. So return -EINVAL if non-zero is passed for offset parameter to mmap(). See Documentation/arch/powerpc/vas-api.rst for mmap() restrictions. Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com> Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com> Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API") Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
2025-06-10powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmapRitesh Harjani (IBM)
memtrace mmap issue has an out of bounds issue. This patch fixes the by checking that the requested mapping region size should stay within the allocated region size. Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: 08a022ad3dfa ("powerpc/powernv/memtrace: Allow mmaping trace buffers") Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-1-maddy@linux.ibm.com
2025-06-09scsi: error: alua: I/O errors for ALUA state transitionsRajashekhar M A
When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. Signed-off-by: Rajashekhar M A <rajs@netapp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: storvsc: Increase the timeouts to storvsc_timeoutDexuan Cui
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and 5s and 10s are used elsewhere. It turns out that rarely the 5s is not enough on Azure, so let's use storvsc_timeout everywhere. In case a timeout happens and storvsc_channel_init() returns an error, close the VMBus channel so that any host-to-guest messages in the channel's ringbuffer, which might come late, can be safely ignored. Add a "const" to storvsc_timeout. Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm/adreno: Check for recognized GPU before bindRob Clark
If we have a newer dtb than kernel, we could end up in a situation where the GPU device is present in the dtb, but not in the drivers device table. We don't want this to prevent the display from probing. So check that we recognize the GPU before adding the GPU component. v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657701/
2025-06-09Merge tag 'for-net-2025-06-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix UAF on mgmt_remove_adv_monitor_complete - MGMT: Protect mgmt_pending list with its own lock - hci_core: fix list_for_each_entry_rcu usage - btintel_pcie: Increase the tx and rx descriptor count - btintel_pcie: Reduce driver buffer posting to prevent race condition - btintel_pcie: Fix driver not posting maximum rx buffers * tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Protect mgmt_pending list with its own lock Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition Bluetooth: btintel_pcie: Increase the tx and rx descriptor count Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers Bluetooth: hci_core: fix list_for_each_entry_rcu usage ==================== Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09net_sched: sch_sfq: fix a potential crash on gso_skb handlingEric Dumazet
SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. Tested: ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/ Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09smb: client: disable path remapping with POSIX extensionsPhilipp Kerling
If SMB 3.1.1 POSIX Extensions are available and negotiated, the client should be able to use all characters and not remap anything. Currently, the user has to explicitly request this behavior by specifying the "nomapposix" mount option. Link: https://lore.kernel.org/4195bb677b33d680e77549890a4f4dd3b474ceaf.camel@rx2.rx-server.de Signed-off-by: Philipp Kerling <pkerling@casix.org> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-09regulator: rpi-panel-v2: Add missing GPIOLIB dependencyMarek Vasut
Add missing GPIOLIB dependency reported by the LKP test robot. This fixes the following report: " kismet warnings: (new ones prefixed by >>) >> kismet: WARNING: unmet direct dependencies detected for GPIO_REGMAP when selected by REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2 WARNING: unmet direct dependencies detected for GPIO_REGMAP Depends on [n]: GPIOLIB [=n] Selected by [y]: - REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2 [=y] && REGULATOR [=y] && I2C [=y] " Fixes: d49305862fdc ("regulator: rpi-panel-v2: Add regulator for 7" Raspberry Pi 720x1280") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506092341.enbNKMOR-lkp@intel.com/ Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Link: https://patch.msgid.link/20250609200242.31271-1-marek.vasut+renesas@mailbox.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09drm/msm/adreno: Pass device_node to find_chipid()Rob Clark
We are going to want to re-use this before the component is bound, when we don't yet have the device pointer (but we do have the of node). v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657705/
2025-06-09drm/msm: Rename add_components_mdp()Rob Clark
To better match add_gpu_components(). Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657700/
2025-06-09drivers: gpu: drm: msm: registers: improve reproducibilityRyan Eatmon
The files generated by gen_header.py capture the source path to the input files and the date. While that can be informative, it varies based on where and when the kernel was built as the full path is captured. Since all of the files that this tool is run on is under the drivers directory, this modifies the application to strip all of the path before drivers. Additionally it prints <stripped> instead of the date. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Viswanath Kraleti <viswanath.kraleti@oss.qualcomm.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/655599/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm/a7xx: Call CP_RESET_CONTEXT_STATEConnor Abbott
Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654924/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix CP_RESET_CONTEXT_STATE bitfield namesConnor Abbott
Based on kgsl. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654922/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09Merge branch '6.16/scsi-queue' into 6.16/scsi-fixesMartin K. Petersen
Pull in remaining fixes from queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: s390: zfcp: Ensure synchronous unit_addPeter Oberparleiter
Improve the usability of the unit_add sysfs attribute by ensuring that the associated FCP LUN scan processing is completed synchronously. This enables configuration tooling to consistently determine the end of the scan process to allow for serialization of follow-on actions. While the scan process associated with unit_add typically completes synchronously, it is deferred to an asynchronous background process if unit_add is used before initial remote port scanning has completed. This occurs when unit_add is used immediately after setting the associated FCP device online. To ensure synchronous unit_add processing, wait for remote port scanning to complete before initiating the FCP LUN scan. Cc: stable@vger.kernel.org Reviewed-by: M Nikhil <nikh1092@linux.ibm.com> Reviewed-by: Nihar Panda <niharp@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Nihar Panda <niharp@linux.ibm.com> Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: iscsi: Fix incorrect error path labels for flashnode operationsAlok Tiwari
Correct the error handling goto labels used when host lookup fails in various flashnode-related event handlers: - iscsi_new_flashnode() - iscsi_del_flashnode() - iscsi_login_flashnode() - iscsi_logout_flashnode() - iscsi_logout_flashnode_sid() scsi_host_put() is not required when shost is NULL, so jumping to the correct label avoids unnecessary operations. These functions previously jumped to the wrong goto label (put_host), which did not match the intended cleanup logic. Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to ensure proper error handling. Also remove the unused put_host label under iscsi_new_flashnode() as it is no longer needed. No functional changes beyond accurate error path correction. Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registersAnkit Chauhan
Spelling fixes: Deocder --> Decoder Memroy --> Memory This is a non-functional change aimed at improving code clarity. Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com> Link: https://lore.kernel.org/r/20250528110604.59528-1-ankitchauhan2065@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm: Temporarily disable stall-on-fault after a page faultConnor Abbott
When things go wrong, the GPU is capable of quickly generating millions of faulting translation requests per second. When that happens, in the stall-on-fault model each access will stall until it wins the race to signal the fault and then the RESUME register is written. This slows processing page faults to a crawl as the GPU can generate faults much faster than the CPU can acknowledge them. It also means that all available resources in the SMMU are saturated waiting for the stalled transactions, so that other transactions such as transactions generated by the GMU, which shares translation resources with the GPU, cannot proceed. This causes a GMU watchdog timeout, which leads to a failed reset because GX cannot collapse when there is a transaction pending and a permanently hung GPU. On older platforms with qcom,smmu-v2, it seems that when one transaction is stalled subsequent faulting transactions are terminated, which avoids this problem, but the MMU-500 follows the spec here. To work around these problems, disable stall-on-fault as soon as we get a page fault until a cooldown period after pagefaults stop. This allows the GMU some guaranteed time to continue working. We only use stall-on-fault to halt the GPU while we collect a devcoredump and we always terminate the transaction afterward, so it's fine to miss some subsequent page faults. We also keep it disabled so long as the current devcoredump hasn't been deleted, because in that case we likely won't capture another one if there's a fault. After this commit HFI messages still occasionally time out, because the crashdump handler doesn't run fast enough to let the GMU resume, but the driver seems to recover from it. This will probably go away after the HFI timeout is increased. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654891/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Delete resume_translation()Connor Abbott
Unused since the previous commit. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654890/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Don't use a worker to capture fault devcoredumpConnor Abbott
Now that we use a threaded IRQ, it should be safe to do this in the fault handler. We can also remove fault_info from struct msm_gpu and just pass it directly. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654889/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix another leak in the submit error pathRob Clark
put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix a fence leak in submit error pathRob Clark
In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09SPI: omap2-mcspi: Fix SPI CS behaviour aroundMark Brown
Merge series from Félix Piédallu <felix.piedallu@non.se.com>: These patches fix the behaviour of the SPI Chip Select of the OMAP2 MCSPI driver used on TI SoCs. The omap2-mcspi driver supports the use of multi mode (multichannel in TI documentation). In this mode, the CS is asserted and deasserted by the hardware. The multi mode is disabled for messages when cs_change=0 for all transfers (e.g when CS is kept asserted between transfers of a same message). The multi mode also needs to be disabled for messages when cs_change=1 on the last transfer (e.g when CS is kept asserted after the WHOLE message), and the message right after. Currently, that is not the case and it CS is deasserted by hardware when it shouldn't. This breaks peripheral drivers that send multiple messages with the CS asserted in between. Patch 1 ensures that multi mode is disabled when cs_change=1 on the last transfer of the message. Patch 2 ensures that multi mode is disable on a message following one with cs_change=1 on the last transfer. This is the case for the TPM TIS SPI driver that uses this logic for flow control purposes. Tested on an AM6442 platform with a TPM ST33HTPH2X32AHE4.
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headersThomas Huth
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is a completely mechanical patch (done with a simple "sed -i" statement). Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headersThomas Huth
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for uapi headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: unwind: Use built-in sort swap to reduce code size and improve performanceYu-Chun Lin
The custom swap function used in sort() was identical to the default built-in sort swap. Remove the custom swap function and passes NULL to sort(), allowing it to use the default swap function. This change reduces code size and improves performance, particularly when CONFIG_MITIGATION_RETPOLINE is enabled. With RETPOLINE mitigation, indirect function calls incur significant overhead, and using the default swap function avoids this cost. $ ./scripts/bloat-o-meter ./unwind.o.old ./unwind.o.new add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-22 (-22) Function old new delta init_unwind_hdr.constprop 544 540 -4 swap_eh_frame_hdr_table_entries 18 - -18 Total: Before=4410, After=4388, chg -0.50% Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxedJason Gunthorpe
The core atomic code has a number of macros where it elaborates architecture primitives into more functions. ARC uses arch_atomic64_cmpxchg() as it's architecture primitive which disable alot of the additional functions. Instead provide arch_cmpxchg64_relaxed() as the primitive and rely on the core macros to create arch_cmpxchg64(). The macros will also provide other functions, for instance, try_cmpxchg64_release(), giving a more complete implementation. Suggested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/Z0747n5bSep4_1VX@J2N7QTR9R3 Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09cpupower: split unitdir from libdir in MakefileFrancesco Poli (wintermute)
Improve the installation procedure for the systemd service unit 'cpupower.service', to be more flexible. Some distros install libraries to /usr/lib64/, but systemd service units have to be installed to /usr/lib/systemd/system: as a consequence, the installation procedure should not assume that systemd service units can be installed to ${libdir}/systemd/system ... Define a dedicated variable ("unitdir") in the Makefile. Link: https://lore.kernel.org/linux-pm/260b6d79-ab61-43b7-a0eb-813e257bc028@leemhuis.info/T/#m0601940ab439d5cbd288819d2af190ce59e810e6 Fixes: 9c70b779ad91 ("cpupower: add a systemd service to run cpupower") Link: https://lore.kernel.org/r/20250521211656.65646-1-invernomuto@paranoici.org Signed-off-by: Francesco Poli (wintermute) <invernomuto@paranoici.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-06-09selftests/x86: Add a test to detect infinite SIGTRAP handler loopXin Li (Intel)
When FRED is enabled, if the Trap Flag (TF) is set without an external debugger attached, it can lead to an infinite loop in the SIGTRAP handler. To avoid this, the software event flag in the augmented SS must be cleared, ensuring that no single-step trap remains pending when ERETU completes. This test checks for that specific scenario—verifying whether the kernel correctly prevents an infinite SIGTRAP loop in this edge case when FRED is enabled. The test should _always_ pass with IDT event delivery, thus no need to disable the test even when FRED is not enabled. Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
generated by cgit (git 2.34.1) at 2025-09-12 15:42:41 +0000