| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.5
We did some house cleaning in MAINTAINERS file so several patches
about that. Few regressions fixed and also fix some recently enabled
memcpy() warnings. Only small commits and nothing special standing
out.
* tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
wifi: ray_cs: Replace 1-element array with flexible array
MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer
MAINTAINERS: wifi: mark mlw8k as orphan
MAINTAINERS: wifi: mark b43 as orphan
MAINTAINERS: wifi: mark zd1211rw as orphan
MAINTAINERS: wifi: mark wl3501 as orphan
MAINTAINERS: wifi: mark rndis_wlan as orphan
MAINTAINERS: wifi: mark ar5523 as orphan
MAINTAINERS: wifi: mark cw1200 as orphan
MAINTAINERS: wifi: atmel: mark as orphan
MAINTAINERS: wifi: rtw88: change Ping as the maintainer
Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12"
wifi: cfg80211: Fix return value in scan logic
Revert "wifi: ath11k: Enable threaded NAPI"
MAINTAINERS: Update mwifiex maintainer list
wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)
====================
Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We forgot to add vsock_perf to the rm command in the `clean`
target, so now we have a left over after `make clean` in
tools/testing/vsock.
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Cc: AVKrasnov@sberdevices.ru
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
tcp_metrics: series of fixes
This series contains a fix for addr_same() and various
data-race annotations.
We still have to address races over tm->tcpm_saddr and
tm->tcpm_daddr later.
====================
Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().
We need to acquire fastopen_seqlock to maintain consistency.
For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.
Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_net can be read or written locklessly.
Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().
Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_vals[] values can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_lock can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_stamp can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Also constify tcpm_check_stamp() dst argument.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.
tcp_metrics use a common hash table, where entries can have different
families.
We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.
Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:
[ 76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
[ 76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
...
Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.
This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").
With this fix applied:
[ 88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
[ 88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
[ 88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2
Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix tmpfs splice read support
* tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix reading via splice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix data corruption caused by insufficient decompression on
deduplicated compressed extents
- Drop a useless s_magic checking in erofs_kill_sb()
* tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
erofs: fix wrong primary bvec selection on deduplicated extents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Split kernel large page mappings into 4k mappings in case debug
pagealloc is enabled again. This got accidentally removed by commit
bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
- Fix error handling in KVM's sthyi handling
- Add missing include to s390's uapi ptrace.h
- Update defconfigs
* tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: add missing linux/const.h include
KVM: s390: fix sthyi error handling
s390: update defconfigs
s390/vmem: split pages when debug pagealloc is enabled
|
|
tu102_gr_load() is completely unused and can be removed to address
this warning:
drivers/gpu/drm/nouveau/dispnv50/disp.c:2517:1: error: no previous prototype for 'nv50_display_create'
Another patch was sent in the meantime to mark the function static but
that would just cause a different warning about an unused function.
Fixes: 1cd97b5490c8 ("drm/nouveau/gr/tu102-: use sw_veid_bundle_init from firmware")
Link: https://lore.kernel.org/all/CACO55tuaNOYphHyB9+ygi9AnXVuF49etsW7x2X5K5iEtFNAAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/20230417210310.2443152-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803143358.13563-1-arnd@kernel.org
|
|
When setting ZT0 via ptrace we do not currently force a reload of the
floating point register state from memory, do that to ensure that the newly
set value gets loaded into the registers on next task execution.
The function was templated off the function for FPSIMD which due to our
providing the option of embedding a FPSIMD regset within the SVE regset
does not directly include the flush.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-zt0-flush-v1-1-72e854eaf96e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.
Clear the flag in the target task.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We need this in order to easily reuse register definitions
and some functions with Sound Open Firmware driver.
According to Documentation/process/license-rules.rst:
"Dual BSD/GPL" The module is dual licensed under a GPL v2
variant or BSD license choice. The exact
variant of the BSD license can only be
determined via the license information
in the corresponding source files.
so use "Dual BSD/GPL" for license string.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230803072638.640789-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simulated chips use a mutex for synchronization in driver callbacks so
they must not be called from interrupt context. Set the can_sleep field
of the GPIO chip to true to force users to only use threaded irqs.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix checkpatch warnings:
unaligned.c:475: ERROR: space required after that ','
Signed-off-by: Yu Han <hanyu001@208suo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This driver does not actually work with DMA mode, but still tries
to call ISA DMA interface functions that are stubbed out on
parisc, resulting in a W=1 build warning:
drivers/parport/parport_gsc.c: In function 'parport_remove_chip':
drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
389 | free_dma(p->dma);
Remove the corresponding code as a prerequisite for turning on -Wempty-body
by default in all kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Clearly, this code isn't needed, but it gives a false positive when
grepping the complete source tree for coherent_dma_mask.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Christoph Biedl reported early OOM on recent kernels:
swapper: page allocation failure: order:0, mode:0x100(__GFP_ZERO),
nodemask=(null)
CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16
Hardware name: 9000/785/C3600
Backtrace:
[<10408594>] show_stack+0x48/0x5c
[<10e152d8>] dump_stack_lvl+0x48/0x64
[<10e15318>] dump_stack+0x24/0x34
[<105cf7f8>] warn_alloc+0x10c/0x1c8
[<105d068c>] __alloc_pages+0xbbc/0xcf8
[<105d0e4c>] __get_free_pages+0x28/0x78
[<105ad10c>] __pte_alloc_kernel+0x30/0x98
[<10406934>] set_fixmap+0xec/0xf4
[<10411ad4>] patch_map.constprop.0+0xa8/0xdc
[<10411bb0>] __patch_text_multiple+0xa8/0x208
[<10411d78>] patch_text+0x30/0x48
[<1041246c>] arch_jump_label_transform+0x90/0xcc
[<1056f734>] jump_label_update+0xd4/0x184
[<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110
[<1056fd08>] static_key_enable+0x1c/0x2c
[<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8
[<1010141c>] start_kernel+0x5f0/0xa98
[<10105da8>] start_parisc+0xb8/0xe4
Mem-Info:
active_anon:0 inactive_anon:0 isolated_anon:0
active_file:0 inactive_file:0 isolated_file:0
unevictable:0 dirty:0 writeback:0
slab_reclaimable:0 slab_unreclaimable:0
mapped:0 shmem:0 pagetables:0
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:0 free_pcp:0 free_cma:0
Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB
inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB
mapped:0kB dirty:0kB writeback:0kB shmem:0kB
+writeback_tmp:0kB kernel_stack:0kB pagetables:0kB sec_pagetables:0kB
all_unreclaimable? no
Normal free:0kB boost:0kB min:0kB low:0kB high:0kB
reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB
inactive_file:0kB unevictable:0kB writepending:0kB
+present:1048576kB managed:1039360kB mlocked:0kB bounce:0kB free_pcp:0kB
local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 0
Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB
0*1024kB 0*2048kB 0*4096kB = 0kB
0 total pagecache pages
0 pages in swap cache
Free swap = 0kB
Total swap = 0kB
262144 pages RAM
0 pages HighMem/MovableOnly
2304 pages reserved
Backtrace:
[<10411d78>] patch_text+0x30/0x48
[<1041246c>] arch_jump_label_transform+0x90/0xcc
[<1056f734>] jump_label_update+0xd4/0x184
[<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110
[<1056fd08>] static_key_enable+0x1c/0x2c
[<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8
[<1010141c>] start_kernel+0x5f0/0xa98
[<10105da8>] start_parisc+0xb8/0xe4
Kernel Fault: Code=15 (Data TLB miss fault) at addr 0f7fe3c0
CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16
Hardware name: 9000/785/C3600
This happens because patching static key code temporarily maps it via
fixmap and if it happens before page allocator is initialized set_fixmap()
cannot allocate memory using pte_alloc_kernel().
Make sure that fixmap page tables are preallocated early so that
pte_offset_kernel() in set_fixmap() never resorts to pte allocation.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v6.4+
|
|
Previously, on unplug events, the TMU mode was disabled first
followed by the Time Synchronization Handshake, irrespective of
whether the tb_switch_tmu_rate_write() API was successful or not.
However, this caused a problem with Thunderbolt 3 (TBT3)
devices, as the TSPacketInterval bits were always enabled by default,
leading the host router to assume that the device router's TMU was
already enabled and preventing it from initiating the Time
Synchronization Handshake. As a result, TBT3 monitors experienced
display flickering from the second hot plug onwards.
To address this issue, we have modified the code to only disable the
Time Synchronization Handshake during TMU disable if the
tb_switch_tmu_rate_write() function is successful. This ensures that
the TBT3 devices function correctly and eliminates the display
flickering issue.
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com
(cherry picked from commit cc4adf3a7323212f303bc9ff0f96346c44fcba06 in drm-misc-next)
Cc: <stable@vger.kernel.org> # 6.3+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
|
|
We have a lurking bug where Fragment Shader Helper Invocations can't load
from memory. But this is actually required in OpenGL and is causing random
hangs or failures in random shaders.
It is unknown how widespread this issue is, but shaders hitting this can
end up with infinite loops.
We enable those only on all Kepler and newer GPUs where we use our own
Firmware.
Nvidia's firmware provides a way to set a kernelspace controlled list of
mmio registers in the gr space from push buffers via MME macros.
v2: drop code for gm200 and newer.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: nouveau@lists.freedesktop.org
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622152017.2512101-1-kherbst@redhat.com
|
|
On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.
Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.
Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727100131.2338127-1-treapking@chromium.org
|
|
While fixing DEVNAME to be more usable, I broke serial_base_match() as the
ctrl and port prefix for device names seemed unnecessary.
The prefixes are still needed by serial_base_match() to probe the serial
base controller port, and serial tx is now broken.
Let's fix the issue by checking against dev->type and drv->name instead
of the prefixes that are no longer in the DEVNAME.
Fixes: 1ef2c2df1199 ("serial: core: Fix serial core controller port name to show controller id")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308021529.35b3ad6c-oliver.sang@intel.com
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230803071034.25571-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is possible that a guest can send a packet that contains a head + 18
slots and yet has a len <= XEN_NETBACK_TX_COPY_LEN. This causes nr_slots
to underflow in xenvif_get_requests() which then causes the subsequent
loop's termination condition to be wrong, causing a buffer overrun of
queue->tx_map_ops.
Rework the code to account for the extra frag_overflow slots.
This is CVE-2023-34319 / XSA-432.
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit. Something like:
pipe(pfd);
sfd = socket(AF_INET, SOCK_DGRAM, 0);
connect(sfd, ...);
send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
write(pfd[1], buffer, 8);
splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);
where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).
The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.
This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:
copy = datalen - transhdrlen - fraggap - pagedlen;
then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:
length -= copy + transhdrlen;
to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.
Fix this by:
(1) Insert a note about the dodgy calculation of 'copy'.
(2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
equation, so that 'offset' isn't regressed and 'length' isn't
increased, which will mean that length and thus copy should match the
amount left in the iterator.
(3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
we're asked to splice more than is in the iterator. It might be
better to not give the warning or even just give a 'short' write.
[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator. This is a potential bug for
the future.
Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leon Romanovsky says:
====================
mlx5 IPsec fixes
The following patches are combination of Jianbo's work on IPsec eswitch mode
together with our internal review toward addition of TCP protocol selectors
support to IPSec packet offload.
Despite not-being fix, the first patch helps us to make second one more
clear, so I'm asking to apply it anyway as part of this series.
====================
Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo in setup_fte_upper_proto_match() where destination UDP port
was used instead of source port.
Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.
As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.
Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.
Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:
- SoCFPGA: Fix incorrect I2C property for SCL signal
- Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
RZ/V2L.
- Juno/Vexpress: remove a dangling symlink
- at91: sam9x60 SoC detection compatible strings
- nspire: Fix arm primecell compatible string
On the NXP i.MX platform, there multiple issues that get addressed:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable
disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
bus_power_dev child, so that runtime PM can translate into the
necessary GPC power domain action
On the driver side, there are two fixes for tegra memory controller
drivers addressing regressions from the merge window, a couple of
minor correctness fixes for SCMI and SMCCC firmware, as well as a
build fix for an lcd backlight driver"
* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
backlight: corgi_lcd: fix missing prototype
memory: tegra: make icc_set_bw return zero if BWMGR not supported
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
ARM: dts: at91: sam9x60: fix the SOC detection
ARM: dts: nspire: Fix arm primecell compatible string
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
...
|
|
Pull bitmap fixes from Yury Norov:
- Fix for bitmap documentation
- Fix for kernel build under certain configurations
* tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux:
lib/bitmap: workaround const_eval test build failure
cpumask: eliminate kernel-doc warnings
|
|
Move the call to kvm_x86_pmu.hw_event_available(), which has nothing to
with the userspace PMU filter, out of check_pmu_event_filter() and into
its sole caller pmc_event_is_allowed(). pmc_event_is_allowed() didn't
exist when commit 7aadaa988c5e ("KVM: x86/pmu: Drop amd_event_mapping[]
in the KVM context"), so presumably the motivation for invoking
.hw_event_available() from check_pmu_event_filter() was to avoid having
to add multiple call sites.
Link: https://lore.kernel.org/r/20230607010206.1425277-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Assert that the number of known fixed_pmc_events matches the max number of
fixed counters supported by KVM, and clean up related code.
Opportunistically extend setup_fixed_pmc_eventsel()'s use of
array_index_nospec() to cover fixed_counters, as nr_arch_fixed_counters is
set based on userspace input (but capped using KVM-controlled values).
Link: https://lore.kernel.org/r/20230607010206.1425277-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Walk only the "real", i.e. non-pseudo, architectural events when checking
if a hardware event is available, i.e. isn't disabled by guest CPUID.
Skipping pseudo-arch events in the loop body is unnecessarily convoluted,
especially now that KVM has enums that delineate between real and pseudo
events.
Link: https://lore.kernel.org/r/20230607010206.1425277-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add "enum intel_pmu_architectural_events" to replace the magic numbers for
the (pseudo-)architectural events, and to give a meaningful name to each
event so that new readers don't need psychic powers to understand what the
code is doing.
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230607010206.1425277-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the recently introduced svm_get_lbr_vmcb() instead an open coded
equivalent to retrieve the target VMCB when emulating writes to
MSR_IA32_DEBUGCTLMSR.
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Clean up the enable_lbrv computation in svm_update_lbrv() to consolidate
the logic for computing enable_lbrv into a single statement, and to remove
the coding style violations (lack of curly braces on nested if).
No functional change intended.
Link: https://lore.kernel.org/r/20230607203519.1570167-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor KVM's handling of LBR MSRs on SVM to avoid a second layer of
case statements, and thus eliminate a dead KVM_BUG() call, which (a) will
never be hit in the current code base and (b) if a future commit breaks
things, will never fire as KVM passes "false" instead "true" or '1' for
the KVM_BUG() condition.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230607203519.1570167-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove the superfluous flush of the current TLB in VMX's handling of
migration of the APIC-access page, as a full TLB flush on all vCPUs will
have already been performed in response to kvm_unmap_gfn_range() *if*
there were SPTEs pointing at the APIC-access page. And if there were no
valid SPTEs, then there can't possibly be TLB entries to flush.
The extra flush was added by commit fb6c81984313 ("kvm: vmx: Flush TLB
when the APIC-access address changes"), with the justification of "because
the SDM says so". The SDM said, and still says:
As detailed in Section xx.x.x, an access to the APIC-access page might
not cause an APIC-access VM exit if software does not properly invalidate
information that may be cached from the EPT paging structures. If EPT was
in use on a logical processor at one time with EPTP X, it is recommended
that software use the INVEPT instruction with the “single-context” INVEPT
type and with EPTP X in the INVEPT descriptor before a VM entry on the
same logical processor that enables EPT with EPTP X and either (a) the
"virtualize APIC accesses" VM- execution control was changed from 0 to 1;
or (b) the value of the APIC-access address was changed.
But the "recommendation" for (b) is predicated on there actually being
a valid EPT translation *and* possible TLB entries for the GPA (or guest
VA when using shadow paging). It's possible that a different vCPU has
established a mapping for the new page, but the current vCPU can't have
entered the guest, i.e. can't have created a TLB entry, between flushing
the old mappings and changing its vmcs.APIC_ACCESS_ADDR.
kvm_unmap_gfn_range() waits for all vCPUs to ack KVM_REQ_APIC_PAGE_RELOAD,
and then flushes remote TLBs (which may or may not also pend a request).
Thus the vCPU is guaranteed to update vmcs.APIC_ACCESS_ADDR before
re-entering the guest and before it can possibly create new TLB entries.
In other words, KVM does flush in this case, it just does so earlier
on while handling the page migration.
Note, VMX also flushes if the vCPU is migrated to a new pCPU, i.e. if
the vCPU is migrated to a pCPU that entered the guest for a different
vCPU.
Suggested-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230721233858.2343941-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Since commit 30fbee49b071 ("Staging: hv: vmbus: Get rid of the unused function vmbus_ontimer()")
this is not used anymore, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230725142108.27280-1-yuehaibing@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyper-V can run VMs at different privilege "levels" known as Virtual
Trust Levels (VTL). Sometimes, it chooses to run two different VMs
at different levels but they share some of their address space. In
such setups VTL2 (higher level VM) has visibility of all of the
VTL0 (level 0) memory space.
When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel
performs a search within the low memory to locate MP tables. However,
in systems where VTL0 manages the low memory and may contain valid
tables, this scanning can result in incorrect MP table information
being provided to the VTL2 kernel, mistakenly considering VTL0's MP
table as its own
Add noop functions to avoid MP parse scan by VTL2.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Use GUEST_FAIL() in ARM's arch timer helpers now that printf-based
guest asserts are the default (and only) style of guest asserts, and
say goodbye to the GUEST_ASSERT_1() alias.
Link: https://lore.kernel.org/r/20230729003643.1053367-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the newfanged printf-based guest assert framework to spit out the
guest RIP when an unhandled exception is detected, which makes debugging
such failures *much* easier.
Link: https://lore.kernel.org/r/20230729003643.1053367-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the param-based guest assert macros and enable the printf versions
for all selftests. Note! This change can affect tests even if they
don't use directly use guest asserts! E.g. via library code, or due to
the compiler making different optimization decisions.
Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert x86's XCR0 vs. CPUID test to use printf-based guest asserts.
Link: https://lore.kernel.org/r/20230729003643.1053367-32-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert x86's VMX PMU capabilities test to use printf-based guest asserts.
Opportunstically add a helper to do the WRMSR+assert so as to reduce the
amount of copy+paste needed to spit out debug information.
Link: https://lore.kernel.org/r/20230729003643.1053367-31-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
