summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-29ALSA: scarlett2: Allow for controls with a "mute mode"Geoffrey D. Bennett
Gen 2/3 interfaces would only use 0/1 values for input level and phantom power switch controls. Gen 4 interfaces use the second bit to indicate that the state should be changed (or is changing), and the input is to be muted (or is muted) while that happens. Add a "mute" flag to config items to enable this behaviour for the level/phantom controls. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/f603cd16079c97fad910087e0302828a289d1c15.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for Gen 4 style parametersGeoffrey D. Bennett
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3: - the values are written into a shared write location - the values are only byte-sized - the read locations now extend beyond 0xFF - a separate NVRAM save step is no longer required This patch implements that alternate write style, triggered by setting the config item size field to zero. The write address is specified through a new config set field gen4_write_addr. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1624e6d8a0c629c3bdfe53825b16e8b589724fc4.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for air/phantom control on input 2Geoffrey D. Bennett
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls on analogue input #2 (the Gen 3 Solo had these controls on analogue input #1). Add air_input_first and phantom_first device info options to cater for this. These options are similar to the level_input_first option that was added for the Gen 3 Solo, but these new options do not require adjusting the index of the control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Remove repeated elem->head.mixer referencesGeoffrey D. Bennett
Use a local variable *mixer rather than repeating elem->header.mixer in scarlett2_direct_monitor_ctl_get() and scarlett2_meter_ctl_get(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b21bacf4056366e10e01077e224d2b4970fdfe31.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Split direct_monitor out from monitor_otherGeoffrey D. Bennett
The notification value for monitor_other on the large interfaces is the same as the notification value for direct_monitor on the 3rd Gen small interfaces. Add a separate scarlett3a_notifications array and split out the direct_monitor handling. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/9b56a483e3e9c1447684f18239a88652c1f01445.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Split input_other into level/pad/air/phantomGeoffrey D. Bennett
Gen 2/3 devices have a single notification value for "input other" changes. Gen 4 has separate notification values for level, pad, air, and phantom power changes. Therefore, split the input_other_updated field and the scarlett2_update_input_other() function into the four components so that they can be handled separately later. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/a1a1d190659d56689792aa20ceeb53a6175171ad.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Rename db_scale_scarlett2_gain to volumeGeoffrey D. Bennett
db_scale_scarlett2_gain is the TLV for the output volume controls. Gen 4 has software-controllable input gain controls, so rename this to db_scale_scarlett2_volume so we can use that name for the inputs. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/d544ec7cc5d5a849da104a5a78b17f61f50657c1.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add #define for SCARLETT2_MIX_MAXGeoffrey D. Bennett
Add a #define for SCARLETT2_MIX_MAX (max of mixer inputs * outputs) as that will be used again soon. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/83cec5ccd75f0db2bd061a76d31a7023d26300c1.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add scarlett2_mixer_value_to_db()Geoffrey D. Bennett
Refactor scarlett2_usb_get_mix(), moving the scarlett2_mixer_values[] lookup into scarlett2_mixer_value_to_db(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/7adf869852aba2819fddb850b0ea8df5f7d73931.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Allow for interfaces without per-channel volumeGeoffrey D. Bennett
Currently-supported interfaces with a mixer have per-channel volume controls, but this changes in Gen 4. Add a check so that the Playback Volume and associated controls don't get created unless the SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/30f68cb311e27f2cc1351cb846218f7248a90263.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove line_out_hw_vol device info entryGeoffrey D. Bennett
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use scarlett2_has_config_item() instead of the per-device line_out_hw_vol. As Gen 4 has a master volume control but no SW/HW switches, check for both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH as needed, even though for Gen 2 and Gen 3 the former implies the latter. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/307c4f8d6d2e034f3e386b51d72a39d77c8a9fce.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Split dim_mute_update from vol_updatedGeoffrey D. Bennett
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute notifications. The Scarlett 4i4 Gen 4 has volume change notification but no dim/mute control so split dim_mute_update out from vol_update. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bf63f48bcc68ae739bd9948c8ee2f87ee7af22a2.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove struct scarlett2_usb_volume_statusGeoffrey D. Bennett
The struct scarlett2_usb_volume_status matched the config space layout of a few volume controls that could be read together and were in fixed locations between Gen 2 and Gen 3 devices. Gen 4 devices have removed, moved, and new related controls, so this needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the only config item that didn't already have its own entry, because it is read-only), we can remove: - struct scarlett2_usb_volume_state, - #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and - scarlett2_usb_get_volume_status() and replace with calls to scarlett2_usb_get_config(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/2ee88994857246bf89fab8e62ac279f3bcf96192.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor common port_count lookupsGeoffrey D. Bennett
Rather than looking up the analogue and mixer I/O counts repeatedly in info->port_count[SCARLETT2_PORT_TYPE_*][SCARLETT2_PORT_*], save those numbers in private variables. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/db0a5b56bdff476e2e31ad8e5ee15008314412b7.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Change num_mux_* from int to u8Geoffrey D. Bennett
num_mux_srcs and num_mux_dsts will fit into a u8, so change the type. More similar counts are coming soon. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/886fbd9ce7f06b13c6dbf36f64e6b2d107d16a83.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Parameterise notificationsGeoffrey D. Bennett
The notification values were previously #define'd, and checked with a series of if() statements calling functions. Replace with an array of masks/callback function pointers, and a pointer to that array in the scarlett2_config_set definitions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/0ee2a3786f9d30c89eeae59d7e933424e8f39162.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Formatting fixesGeoffrey D. Bennett
Add missing blank line before comment. For consistency with other functions that have few parameters, move the parameters onto the same line as the function name. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/72be568b02eea12621b0c4a96f8e8cc65b0c13c0.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor scarlett2_config_save()Geoffrey D. Bennett
Use the new scarlett2_usb_activate_config() helper function rather than preparing the request manually and calling scarlett2_usb(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bbc733dc081f311fb3167e81b15cd76324aa6307.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor scarlett2_usb_set_config()Geoffrey D. Bennett
Pull out common code from scarlett2_usb_set_config() and create scarlett2_usb_set_data() and scarlett2_usb_activate_config(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/257eca0b07708339133f916930e388057d116eb8.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add check for config_item presenceGeoffrey D. Bennett
Update scarlett2_usb_get_config() and scarlett2_usb_set_config() to make sure that the config_item_num is valid for the device. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/b0572b23291ffd1b208f21d298adaf4d9f1fe4bc.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove scarlett2_config_sets arrayGeoffrey D. Bennett
Replace array index into config sets with a pointer to a config set. Copy the config_set pointer to the scarlett2_data struct. This simplifies both the definition and use of the config sets. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/61f69519fb6fbb677e066891a3a6771aeeec106d.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add config set structGeoffrey D. Bennett
Add struct scarlett2_config_set so that data which is common to all devices in a config set can be stored there rather than in the model-specific data. Accordingly, rename scarlett2_config_items[] to scarlett2_config_sets[]. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bfdb04cd6239af9a8c26a52da0537980f77c0437.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Check presence of mixer using mux_assignmentGeoffrey D. Bennett
Currently the presence of a mixer is determined by checking if the device uses the GEN_3A config set. Add scarlett2_has_mixer() function which checks for the presence of mux_assignment entries instead. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ef6f4d360c2fe682ab65f83cccbe5be66ccc6296.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Check for phantom persistence config itemGeoffrey D. Bennett
Allow for the phantom persistence config item to not exist. This is needed for the Scarlett Gen 4 series. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/3ccaf8069280827bd6c44f103fcb770bd50b7e2e.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Infer standalone switch from config itemsGeoffrey D. Bennett
Rather than assuming the standalone switch is present for all devices with a mixer, instead check for the presence of the SCARLETT2_CONFIG_STANDALONE_SWITCH config item. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/59c30885b02d65feaab2c338cf46889d72d01813.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Infer has_msd_mode from config itemsGeoffrey D. Bennett
Rather than storing has_msd_mode in the per-device structure, infer this from the presence of the SCARLETT2_CONFIG_MSD_SWITCH entry in the device's configuration set. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ecbf3740e6b30a245333528ae4c504f37a9bc6bf.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Simplify enums by removing explicit valuesGeoffrey D. Bennett
This commit removes the explicit integer assignments from the enums. The actual values matter little, and not assigning explicit values makes it easier to modify the longer lists in the future. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/67f0f1bb8b90d7c76dfe7062d22d33bbde19cf93.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add support for uploading new firmwareGeoffrey D. Bennett
Add ops.write to the hwdep interface. Once the upgrade firmware flash segment has been erased, writes to the hwdep fd are permitted, and translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ZY65S0ojShSNSeRQ@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add ioctl commands to erase flash segmentsGeoffrey D. Bennett
Add ioctls: - SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT - SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT - SCARLETT2_IOCTL_GET_ERASE_PROGRESS The settings or the firmware flash segment can be selected and then erased (asynchronous operation), and the erase progress can be monitored. If the erase progress is not monitored, then subsequent hwdep operations will block until the erase is complete. Once the erase is started, ALSA controls that communicate with the device will all return -EBUSY, and the device must be rebooted. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add skeleton hwdep/ioctl interfaceGeoffrey D. Bennett
Add skeleton hwdep/ioctl interface, beginning with SCARLETT2_IOCTL_PVERSION and SCARLETT2_IOCTL_REBOOT. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/24ffcd47a8a02ebad3c8b2438104af8f0169164e.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Retrieve useful flash segment numbersGeoffrey D. Bennett
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find the App_Settings and App_Upgrade flash segment numbers, and store them in the scarlett2_data struct. These will be used later to implement reset to factory defaults and firmware upgrade functions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add #defines for firmware upgradeGeoffrey D. Bennett
Add #defines for SCARLETT2_USB_* needed for firmware upgrade: reboot, info-flash, info-segment, erase-segment, get-erase, and write-segment. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/3077651c21bc8d4f046c68b79ec387aa16fcc5e4.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add missing mutex lock around get meter levelsGeoffrey D. Bennett
As scarlett2_meter_ctl_get() uses meter_level_map[], the data_mutex should be locked while accessing it. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 3473185f31df ("ALSA: scarlett2: Remap Level Meter values") Link: https://lore.kernel.org/r/77e093c27402c83d0730681448fa4f57583349dd.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add clamp() in scarlett2_mixer_ctl_put()Geoffrey D. Bennett
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside scarlett2_mixer_values[]. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add missing error checks to *_ctl_get()Geoffrey D. Bennett
The *_ctl_get() functions which call scarlett2_update_*() were not checking the return value. Fix to check the return value and pass to the caller. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config()Geoffrey D. Bennett
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not checking the result. Return the error if it fails rather than continuing with an invalid value. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 9e15fae6c51a ("ALSA: usb-audio: scarlett2: Allow bit-level access to config") Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add missing error check to scarlett2_config_save()Geoffrey D. Bennett
scarlett2_config_save() was ignoring the return value from scarlett2_usb(). As this function is not called from user-space we can't return the error, so call usb_audio_err() instead. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Update maintainer infoGeoffrey D. Bennett
Update MAINTAINERS and "enabled" message with GitHub repository links. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/62f32404eaa8663cc304648354b85bcb5914ce72.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Convert meter levels from little-endianGeoffrey D. Bennett
Add missing conversion from little-endian data to CPU-endian in scarlett2_usb_get_meter_levels(). Fixes: 3473185f31df ("ALSA: scarlett2: Remap Level Meter values") Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29tracing: Fix blocked reader of snapshot bufferSteven Rostedt (Google)
If an application blocks on the snapshot or snapshot_raw files, expecting to be woken up when a snapshot occurs, it will not happen. Or it may happen with an unexpected result. That result is that the application will be reading the main buffer instead of the snapshot buffer. That is because when the snapshot occurs, the main and snapshot buffers are swapped. But the reader has a descriptor still pointing to the buffer that it originally connected to. This is fine for the main buffer readers, as they may be blocked waiting for a watermark to be hit, and when a snapshot occurs, the data that the main readers want is now on the snapshot buffer. But for waiters of the snapshot buffer, they are waiting for an event to occur that will trigger the snapshot and they can then consume it quickly to save the snapshot before the next snapshot occurs. But to do this, they need to read the new snapshot buffer, not the old one that is now receiving new data. Also, it does not make sense to have a watermark "buffer_percent" on the snapshot buffer, as the snapshot buffer is static and does not receive new data except all at once. Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: debdd57f5145f ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-29ring-buffer: Fix wake ups when buffer_percent is set to 100Steven Rostedt (Google)
The tracefs file "buffer_percent" is to allow user space to set a water-mark on how much of the tracing ring buffer needs to be filled in order to wake up a blocked reader. 0 - is to wait until any data is in the buffer 1 - is to wait for 1% of the sub buffers to be filled 50 - would be half of the sub buffers are filled with data 100 - is not to wake the waiter until the ring buffer is completely full Unfortunately the test for being full was: dirty = ring_buffer_nr_dirty_pages(buffer, cpu); return (dirty * 100) > (full * nr_pages); Where "full" is the value for "buffer_percent". There is two issues with the above when full == 100. 1. dirty * 100 > 100 * nr_pages will never be true That is, the above is basically saying that if the user sets buffer_percent to 100, more pages need to be dirty than exist in the ring buffer! 2. The page that the writer is on is never considered dirty, as dirty pages are only those that are full. When the writer goes to a new sub-buffer, it clears the contents of that sub-buffer. That is, even if the check was ">=" it would still not be equal as the most pages that can be considered "dirty" is nr_pages - 1. To fix this, add one to dirty and use ">=" in the compare. Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-29Merge branch 'topic/cs35l41' into for-nextTakashi Iwai
Pull CS35L41 codec extension series. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29platform/x86/intel/pmc: Move GBE LTR ignore to suspend callbackDavid E. Box
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") caused a network performance regression due to the GBE LTR ignore that it added at probe. This was needed in order to allow the SoC to enter the deepest Package C state. To fix the regression and at least support PC10 during suspend, move the LTR ignore from probe to the suspend callback, and enable it again on resume. This solution will allow PC10 during suspend but restrict Package C entry at runtime to no deeper than PC8/9 while a network cable it attach to the PCH LAN. Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") Signed-off-by: "David E. Box" <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29platform/x86/intel/pmc: Allow reenabling LTRsDavid E. Box
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") caused a network performance regression due to the GBE LTR ignore that it added during probe. The fix will move the ignore to occur at suspend-time (so as to not affect suspend power). This will require the ability to enable the LTR again on resume. Modify pmc_core_send_ltr_ignore() to allow enabling an LTR. Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") Signed-off-by: "David E. Box" <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29platform/x86/intel/pmc: Add suspend callbackDavid E. Box
Add a suspend callback to struct pmc for performing platform specific tasks before device suspend. This is needed in order to perform GBE LTR ignore on certain platforms at suspend-time instead of at probe-time and replace the GBE LTR ignore removal that was done in order to fix a bug introduced by commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()"). Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") Signed-off-by: "David E. Box" <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probeShin'ichiro Kawasaki
p2sb_bar() unhides P2SB device to get resources from the device. It guards the operation by locking pci_rescan_remove_lock so that parallel rescans do not find the P2SB device. However, this lock causes deadlock when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan locks pci_rescan_remove_lock and probes PCI devices. When PCI devices call p2sb_bar() during probe, it locks pci_rescan_remove_lock again. Hence the deadlock. To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar(). Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources() for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(), refer the cache and return to the caller. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support") Cc: stable@vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/ Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29ALSA: hda/realtek: Add quirks for Dell modelsStefan Binding
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C. Models use internal and external boost. All models require DSD support to be added inside cs35l41_hda_property.c Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> # v6.7+ Link: https://lore.kernel.org/r/20231221132518.3213-4-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda: cs35l41: Prevent firmware load if SPI speed too lowStefan Binding
Some laptops without _DSD have the SPI speed set very low in the BIOS. Since the SPI controller uses this speed as its max speed, the SPI transactions are very slow. Firmware download writes to many registers, and if the SPI speed is too slow, it can take a long time to download. For this reason, disable firmware loading if the maximum SPI speed is too low. Without Firmware, audio playback will work, but the volume will be low to ensure safe operation of the CS35L41. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> # v6.7+ Link: https://lore.kernel.org/r/20231221132518.3213-3-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda: cs35l41: Support additional Dell models without _DSDStefan Binding
Add new model entries into configuration table. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> # v6.7+ Link: https://lore.kernel.org/r/20231221132518.3213-2-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: seq: fix kvmalloc_array() arguments orderDmitry Antipov
When compiling with gcc version 14.0.0 20231220 (experimental) and W=1, I've noticed the following warning: sound/core/seq/seq_memory.c: In function 'snd_seq_pool_init': sound/core/seq/seq_memory.c:445:41: warning: 'kvmalloc_array' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args] 445 | cellptr = kvmalloc_array(sizeof(struct snd_seq_event_cell), pool->size, | ^~~~~~ Since 'n' and 'size' arguments of 'kvmalloc_array()' are multiplied to calculate the final size, their actual order doesn't affect the result and so this is not a bug. But it's still worth to fix it. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://lore.kernel.org/r/20231221091605.14660-1-dmantipov@yandex.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-19 18:09:02 +0000