summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-28platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driverRajvi Jingar
Add Lunar Lake M support in intel_pmc_core driver Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Link: https://lore.kernel.org/r/20231219042216.2592029-8-rajvi.jingar@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-28platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driverRajvi Jingar
Add Arrow Lake S support in intel_pmc_core driver Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Link: https://lore.kernel.org/r/20231219042216.2592029-7-rajvi.jingar@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-28arm64: dts: sprd: Change UMS512 idle-state nodename to match bindingsChunyan Zhang
Fix below dtbs_check warning: idle-states: 'core-pd' does not match any of the regexes: '^(cpu|cluster)-', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20231221092824.1169453-3-chunyan.zhang@unisoc.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28arm64: dts: sprd: Add clock reference for pll2 on UMS512Chunyan Zhang
Fix below dtbs_check warning: 'clocks' is a dependency of 'clock-names' Link: https://lore.kernel.org/r/20231221092824.1169453-2-chunyan.zhang@unisoc.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28arm64: dts: sprd: Removed unused clock references from etm nodesChunyan Zhang
Remove these unused clock references to fix dtbs_check warnings: etm@3f740000: clocks: [[11], [35, 34], [36, 8]] is too long etm@3f740000: clock-names:1: 'atclk' was expected etm@3f740000: clock-names: ['apb_pclk', 'clk_cs', 'cs_src'] is too long Link: https://lore.kernel.org/r/20231221092824.1169453-1-chunyan.zhang@unisoc.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28arm64: dts: sprd: Add support for Unisoc's UMS9620Chunyan Zhang
Add basic support for Unisoc's UMS9620, with this patch, the board ums9620-2h10 can run into console. Link: https://lore.kernel.org/r/20231218100234.1102916-4-chunyan.zhang@unisoc.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28dt-bindings: arm: Add compatible strings for Unisoc's UMS9620Chunyan Zhang
Added bindings for Unisoc's UMS9620-2H10 board and UMS9620 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231218100234.1102916-3-chunyan.zhang@unisoc.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28arm64: dts: sprd: fix the cpu node for UMS512Cixi Geng
The UMS512 Socs have 8 cores contains 6 a55 and 2 a75. modify the cpu nodes to correct information. Fixes: 2b4881839a39 ("arm64: dts: sprd: Add support for Unisoc's UMS512") Cc: stable@vger.kernel.org Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20230711162346.5978-1-cixi.geng@linux.dev Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
2023-12-28OPP: Fix _set_required_opps when opp is NULLBryan O'Donoghue
_set_required_opps can be called with opp NULL in _disable_opp_table(). commit e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") requires the opp pointer to be non-NULL to function. [ 81.253439] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 81.438407] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 81.445296] Workqueue: pm pm_runtime_work [ 81.449446] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 81.456609] pc : _set_required_opps+0x178/0x28c [ 81.461288] lr : _set_required_opps+0x178/0x28c [ 81.465962] sp : ffff80008078bb00 [ 81.469375] x29: ffff80008078bb00 x28: ffffd1cd71bfe308 x27: 0000000000000000 [ 81.476730] x26: ffffd1cd70ebc578 x25: ffffd1cd70a08710 x24: 00000000ffffffff [ 81.484083] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff56ff892b3c48 [ 81.491435] x20: ffff56f1071c10 x19: 0000000000000000 x18: ffffffffffffffff [ 81.498788] x17: 2030207865646e69 x16: 2030303131207370 x15: 706f5f6465726975 [ 81.506141] x14: 7165725f7465735f x13: ffff5700f5c00000 x12: 00000000000008ac [ 81.513495] x11: 00000000000002e4 x10: ffff5700f6700000 x9 : ffff5700f5c00000 [ 81.520848] x8 : 00000000fffdffff x7 : ffff5700f6700000 x6 : 80000000fffe0000 [ 81.528200] x5 : ffff5700fef40d08 x4 : 0000000000000000 x3 : 0000000000000000 [ 81.535551] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff56ff81298f80 [ 81.542904] Call trace: [ 81.545437] _set_required_opps+0x178/0x28c [ 81.549754] _set_opp+0x3fc/0x5c0 [ 81.553181] dev_pm_opp_set_rate+0x90/0x26c [ 81.557498] core_power_v4+0x44/0x15c [venus_core] [ 81.562509] venus_runtime_suspend+0x40/0xd0 [venus_core] [ 81.568135] pm_generic_runtime_suspend+0x2c/0x44 [ 81.572983] __rpm_callback+0x48/0x1d8 [ 81.576852] rpm_callback+0x6c/0x78 [ 81.580453] rpm_suspend+0x10c/0x570 [ 81.584143] pm_runtime_work+0xc4/0xc8 [ 81.588011] process_one_work+0x138/0x244 [ 81.592153] worker_thread+0x320/0x438 [ 81.596021] kthread+0x110/0x114 [ 81.599355] ret_from_fork+0x10/0x20 [ 81.603052] Code: f10000ff fa5410e0 54fffbe1 97f05ae8 (f94026c5) [ 81.609317] ---[ end trace 0000000000000000 ]--- Fix it. Fixes: e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> [ Viresh: Implemented the fix differently ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2023-12-27ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()Namjae Jeon
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length, ksmbd_check_message doesn't validate request buffer it correctly. So slab-out-of-bounds warning from calling smb_strndup_from_utf16() in smb2_open() could happen. If ->NameLength is non-zero, Set the larger of the two sums (Name and CreateContext size) as the offset and length of the data area. Reported-by: Yang Chaoming <lometsj@live.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-27fs: move fscrypt keyring destruction to after ->put_superJosef Bacik
btrfs has a variety of asynchronous things we do with inodes that can potentially last until ->put_super, when we shut everything down and clean up all of our async work. Due to this we need to move fscrypt_destroy_keyring() to after ->put_super, otherwise we get warnings about still having active references on the master key. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Neal Gompa <neal@gompa.dev> Link: https://lore.kernel.org/r/20231227171429.9223-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-12-27f2fs: move release of block devices to after kill_block_super()Eric Biggers
Call destroy_device_list() and free the f2fs_sb_info from kill_f2fs_super(), after the call to kill_block_super(). This is necessary to order it after the call to fscrypt_destroy_keyring() once generic_shutdown_super() starts calling fscrypt_destroy_keyring() just after calling ->put_super. This is because fscrypt_destroy_keyring() may call into f2fs_get_devices() via the fscrypt_operations. Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20231227171429.9223-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-12-28firmware: coreboot: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/d323e4f24bfab3ac1480933deb51e7c5cb025b09.1703693980.git.u.kleine-koenig@pengutronix.de Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
2023-12-27Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues or are not considered backporting material" * tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add an old address for Naoya Horiguchi mm/memory-failure: cast index to loff_t before shifting it mm/memory-failure: check the mapcount of the precise page mm/memory-failure: pass the folio and the page to collect_procs() selftests: secretmem: floor the memory size to the multiple of page_size mm: migrate high-order folios in swap cache correctly maple_tree: do not preallocate nodes for slot stores mm/filemap: avoid buffered read/write race to read inconsistent data kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset kexec: select CRYPTO from KEXEC_FILE instead of depending on it kexec: fix KEXEC_FILE dependencies
2023-12-27Documentation/i2c: fix spelling error in i2c-address-translatorsAttreyee Mukherjee
Correct to "stretched" from "streched" in "keeps clock streched on bus A waiting for reply". Signed-off-by: Attreyee Mukherjee <tintinm2017@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-12-27igc: Check VLAN EtherType maskKurt Kanzenbach
Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that. For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Check VLAN TCI maskKurt Kanzenbach
Currently the driver accepts VLAN TCI steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. There are two ways to handle the VLAN TCI mask: 1. Match on the PCP field using a VLAN prio filter 2. Match on complete TCI field using a flex filter Therefore, add checks and code for that. For instance the following rule is invalid and will be converted into a VLAN prio rule which is not correct: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |Added rule with ID 61 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 61 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x0 mask: 0xffff | VLAN: 0x1 mask: 0x1fff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 1 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Report VLAN EtherType matching back to userKurt Kanzenbach
Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it. Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari
Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: dpll: fix phase offset valueArkadiusz Kubalewski
Stop dividing the phase_offset value received from firmware. This fault is present since the initial implementation. The phase_offset value received from firmware is in 0.01ps resolution. Dpll subsystem is using the value in 0.001ps, raw value is adjusted before providing it to the user. The user can observe the value of phase offset with response to `pin-get` netlink message of dpll subsystem for an active pin: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":2}' Where example of correct response would be: {'board-label': 'C827_0-RCLKA', 'capabilities': 6, 'clock-id': 4658613174691613800, 'frequency': 1953125, 'id': 2, 'module-name': 'ice', 'parent-device': [{'direction': 'input', 'parent-id': 6, 'phase-offset': -216839550, 'prio': 9, 'state': 'connected'}, {'direction': 'input', 'parent-id': 7, 'phase-offset': -42930, 'prio': 8, 'state': 'connected'}], 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, 'type': 'mux'} Provided phase-offset value (-42930) shall be divided by the user with DPLL_PHASE_OFFSET_DIVIDER to get actual value of -42.930 ps. Before the fix, the response was not correct: {'board-label': 'C827_0-RCLKA', 'capabilities': 6, 'clock-id': 4658613174691613800, 'frequency': 1953125, 'id': 2, 'module-name': 'ice', 'parent-device': [{'direction': 'input', 'parent-id': 6, 'phase-offset': -216839, 'prio': 9, 'state': 'connected'}, {'direction': 'input', 'parent-id': 7, 'phase-offset': -42, 'prio': 8, 'state': 'connected'}], 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, 'type': 'mux'} Where phase-offset value (-42), after division (DPLL_PHASE_OFFSET_DIVIDER) would be: -0.042 ps. Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Shut down VSI with "link-down-on-close" enabledNgai-Mint Kwan
Disabling netdev with ethtool private flag "link-down-on-close" enabled can cause NULL pointer dereference bug. Shut down VSI regardless of "link-down-on-close" state. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Fix link_down_on_close messageKatarzyna Wieczerzycka
The driver should not report an error message when for a medialess port the link_down_on_close flag is enabled and the physical link cannot be set down. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27block: rename and document BLK_DEF_MAX_SECTORSChristoph Hellwig
Give BLK_DEF_MAX_SECTORS a _CAP postfix and document what it is used for. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231227092305.279567-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27loop: don't abuse BLK_DEF_MAX_SECTORSChristoph Hellwig
BLK_DEF_MAX_SECTORS despite the confusing name is the default cap for the max_sectors limits. Don't use it to initialize max_hw_setors, which is a hardware / driver capacility. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231227092305.279567-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27aoe: don't abuse BLK_DEF_MAX_SECTORSChristoph Hellwig
BLK_DEF_MAX_SECTORS despite the confusing name is the default cap for the max_sectors limits. Don't use it to initialize max_hw_setors, which is a hardware / driver capacility. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231227092305.279567-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORSChristoph Hellwig
null_blk has some rather odd capping of the max_hw_sectors value to BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the default cap for the max_sectors field used for normal file system I/O. Remove all the capping, and simply leave it to the block layer or user to take up or not all of that for file system I/O. Fixes: ea17fd354ca8 ("null_blk: Allow controlling max_hw_sectors limit") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27loop: don't update discard limits from loop_set_statusChristoph Hellwig
loop_set_status doesn't change anything relevant to the discard and write_zeroes setting, so don't bother calling loop_config_discard. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231227082020.249427-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27Kill sched.h dependency on rcupdate.hKent Overstreet
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big sched.h dependency. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27kill unnecessary thread_info.h includeKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27Kill unnecessary kernel.h includeKent Overstreet
More trimming down unnecessary includes. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27preempt.h: Kill dependency on list.hKent Overstreet
We really only need types.h, list.h is big. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27rseq: Split out rseq.h from sched.hKent Overstreet
We're trying to get sched.h down to more or less just types only, not code - rseq can live in its own header. This helps us kill the dependency on preempt.h in sched.h. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27LoongArch: signal.c: add header file to fix build errorRandy Dunlap
loongarch's signal.c uses rseq_signal_deliver() so it should pull in the appropriate header to prevent a build error: ../arch/loongarch/kernel/signal.c: In function 'handle_signal': ../arch/loongarch/kernel/signal.c:1034:9: error: implicit declaration of function 'rseq_signal_deliver' [-Werror=implicit-function-declaration] 1034 | rseq_signal_deliver(ksig, regs); | ^~~~~~~~~~~~~~~~~~~ Fixes: b74baf4ad05b ("LoongArch: Add signal handling support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: loongarch@lists.linux.dev Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27gpio: sysfs: drop tabs from local variable declarationsBartosz Golaszewski
Older code has an annoying habit of putting tabs between the type and the name of the variable. This doesn't really add to readability and newer code doesn't do it so make the entire file consistent. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27gpiolib: drop tabs from local variable declarationsBartosz Golaszewski
Older code has an annoying habit of putting tabs between the type and the name of the variable. This doesn't really add to readability and newer code doesn't do it so make the entire file consistent. While at it: convert 'unsigned' to 'unsigned int'. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27gpiolib: remove extra_checksBartosz Golaszewski
extra_checks is only used in a few places. It also depends on a non-standard DEBUG define one needs to add to the source file. The overhead of removing it should be minimal (we already use pure might_sleep() in the code anyway) so drop it. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27gpio: tps65219: don't use CONFIG_DEBUG_GPIOBartosz Golaszewski
CONFIG_DEBUG_GPIO should only be used to enable debug log messages and for core GPIOLIB debugging. Don't use it to control the execution of potentially buggy code. Just put it under an always-false #if. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27MAINTAINERS: Add a missing file to the INTEL GPIO sectionAndy Shevchenko
When gpio-tangier was split the new born headers had been missed in the MAINTAINERS. Add it there. Fixes: d2c19e89e03c ("gpio: tangier: Introduce Intel Tangier GPIO driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27MAINTAINERS: Remove Andy from GPIO maintainersAndy Shevchenko
Too many things are going on, and reviewing GPIO related code seems not the best I can do, hence I step down as a reviewer of the GPIO subsystem. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27MAINTAINERS: split out the uAPI into a new sectionBartosz Golaszewski
Kent Gibson is the author of the character device uAPI v2 and should be Cc'ed on all patches aimed for it. Unfortunately this is not the case as he's not listed in MAINTAINERS. Split the uAPI files into their own section and make Kent the reviewer. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27gpiolib: cdev: replace locking wrappers for gpio_device with guardsKent Gibson
Replace the wrapping functions that inhibit removal of the gpio chip with equivalent guards. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: replace locking wrappers for config_mutex with guardsKent Gibson
After the adoption of guard(), the locking wrappers that hold the config_mutex for linereq_set_values() and linereq_set_config() no longer add value, so combine them into the functions they wrap. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: allocate linereq using kvzalloc()Kent Gibson
The size of struct linereq may exceed a page, so allocate space for it using kvzalloc() instead of kzalloc() to handle the case where memory is heavily fragmented and kzalloc() cannot find a sufficient contiguous region. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: include overflow.hKent Gibson
struct_size() is used to calculate struct linereq size, so explicitly include overflow.h. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27Merge tag 'v6.7-rc7' into gpio/for-nextBartosz Golaszewski
Linux 6.7-rc7
2023-12-27net: pktgen: Use wait_event_freezable_timeout() for freezable kthreadKevin Hao
A freezable kernel thread can enter frozen state during freezing by either calling try_to_freeze() or using wait_event_freezable() and its variants. So for the following snippet of code in a kernel thread loop: wait_event_interruptible_timeout(); try_to_freeze(); We can change it to a simple wait_event_freezable_timeout() and then eliminate a function call. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27Merge tag 'wireless-2023-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a couple of things: * debugfs fixes * rfkill fix in iwlwifi * remove mostly-not-working list ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27Merge branch 'net-tja11xx-macsec-support'David S. Miller
Radu Pirea says: ==================== Add MACsec support for TJA11XX C45 PHYs This is the MACsec support for TJA11XX PHYs. The MACsec block encrypts the ethernet frames on the fly and has no buffering. This operation will grow the frames by 32 bytes. If the frames are sent back to back, the MACsec block will not have enough room to insert the SecTAG and the ICV and the frames will be dropped. To mitigate this, the PHY can parse a specific ethertype with some padding bytes and replace them with the SecTAG and ICV. These padding bytes might be dummy or might contain information about TX SC that must be used to encrypt the frame. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tagRadu Pirea (NXP OSS)
Implement mdo_insert_tx_tag to insert the TLV header in the ethernet frame. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: phy: nxp-c45-tja11xx: add MACsec statisticsRadu Pirea (NXP OSS)
Add MACsec statistics callbacks. The statistic registers must be set to 0 if the SC/SA is deleted to read relevant values next time when the SC/SA is used. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-20 23:30:29 +0000