summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-03rt2x00: rt2x00pci_regbusy_read() - only print register access failure onceTim Gardner
BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03ath9k: Re-enable interrupts after a channel change failureRobert Shade
ath_complete_reset will not be called if ath9k_hw_reset is unsuccessful, so we need to re-enable intertupts to balence the previous ath_prepare_reset call. Also schedule a reset as a best effort method to recover the chip from whatever state caused the channel change failure. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=55771 Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: do not proceed if fail to download nvram to dongleFranky Lin
Nvram contains critical initialization parameter for firmware to run. Host driver should not proceed if nvram fails to be downloaded to dongle. Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: fix returning cipher_suite for get_key operation.Hante Meuleman
When multiple cipher suites have been programmed then the lowest suite is to be retured. This fixes issue when AP mode is using CCMP and TKIP WPA combination where rekeying will fail. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: fix stopping AP.Hante Meuleman
on stop_ap the dongle was not properly shutdown. As a result it was not possible to restart AP or STA after AP operation without restarting the device. This patch will fix that. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: fix tkip mic tx/rx ap swap bug.Hante Meuleman
tx and rx michael tkip keys are always swapped in case being configured per mac. This is wrong for AP. The swap should only be done for STA mode. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03mwifiex: complete last internal scanBing Zhao
We are waiting on first scan command of internal scan request before association, so we should complete on last internal scan command response. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-04-01rtlwifi: rtl8188ee: Enable build of new driverLarry Finger
These changes enable building the new driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8188ee: Enable recognition of RTL8188EELarry Finger
These patches modify the common probe routine to recognize the RTL8188EE chip and implement asynchronous firmware reading in the callback routine to initialize the sw variables. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192de: rtl8723ae: Add changes ↵Larry Finger
required by adding rtl81988ee This patch combines the remaining changes in the rtlwifi family to handle the addition of rtl8188ee. A number of these changes eliminate some CamelCase variable names, and other shorten common variable names so that long lines in the new driver could be shortened. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8188ee: Add new driverLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queueLarry Finger
In commit a5ffbe0, some of the calls to rtl_lps_leave() were switched to be called from a work queue to avoid a scheduling while atomic bug. This patch converts the remaining calls to use the work queue. In addition, the call to rtl_lps_enter() is also switched to the work queue. None of these newly converted calls had triggered the bug (yet), but this change make all of them fit a single pattern. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8192c: rtl8192ce: Update to vendor driver of 2013.02.07Larry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8723ae: Update to vendor driver of 2013.02.07Larry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi: rtl8192se: Update driver to match vendor driver of 2013.02.07Larry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rtlwifi Modify existing bits to match vendor version 2013.02.07Larry Finger
These changes add the new variables for P2P and modify the various struct definitions for other new features. This patch updates files base.{c,h} for the changes in the newest vendor driver. This patch updates files ps.{c,h} for the changes in the newest vendor driver. This patch updates files debug.{c,h}, efuse.c, pci.{c,h}, and wifi.h for the changes in the newest vendor driver. This patch updates files core.c, ps.c, rc.c, and wifi.h for the changes in the newest vendor driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rt2x00: rt2800lib: probe RT chipset earlierGabor Juhos
The 'rt2800_validate_eeprom' function uses the type of the RT chipset for verifying the number of RX streams on RT28x0 devices. However the type of the RT chipset is not yet detected when the 'rt2800_validate_eeprom' function is called. Move the RT chipset detection code into a separate helper function, and call it before rt2800_validate_eeprom. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rt2x00: rt2800lib: separate RT and RF chipset detectionGabor Juhos
Use the newly introduced rt2x00_set_{rf,rt} helpers to set the RT and RF chipset separately. This change makes it possible to move the RT detection code into another function which will be done in a subseqent patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01rt2x00: introduce rt2x00_set_{rt,rf} helpersGabor Juhos
The new helpers can be used to set the type of the RT and RF chipsets separately. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01b43: make struct b2056_inittabs_pts constHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01b43: mark some functions and structs staticHauke Mehrtens
This fixes some sparse warnings. b43_nphy_set_rxantenna() was not used anywhere. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01mwifiex: use separate AMPDU tx/rx window sizes in 11ac networksAvinash Patil
Newer 11ac enabled chipsets have more TX and RX buffers in FW and hardware; so they may support larger TX and RX window sizes for BA. Reset BA settings during association, adhoc join/start or start_ap() if we are joining/creating 11ac network. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Sagar Bijwe <bsagar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01mwifiex: change default tx/rx win_size for BA setupAvinash Patil
This patch fixes an issue where RX throughput values observed were substantially lower than TX counterparts for PCIe8897 STA. PCIe8897 supports larger rx_win_size. After changing these values we see big improvement for TX and RX throughput values. Different tx_win_size and rx_win_size are used for AP mode. All BA setup related initialization has been moved to separate function. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Sagar Bijwe <bsagar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01mwifiex: limit channel number not to overflow memoryStone Piao
Limit the channel number in scan request, or the driver scan config structure memory will be overflowed. Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01Merge tag 'nfc-fixes-3.9-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: "This is the 2nd batch of NFC fixes for 3.9. This time we have: - A crash fix for when a DGRAM LLCP socket is listening while the NFC adapter is physically removed. - A potential double skb free when the LLCP socket receive queue is full. - A fix for properly handling multiple and consecutive LLCP connections, and not trash the socket ack log. - A build failure for the MEI microread physical layer, now that the MEI bus APIs have been merged into char-misc-next." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-04-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-04-01NFC: microread: Fix build failure due to a new MEI bus APISamuel Ortiz
uuid device_id field is removed and mei_device is renamed mei_cl_device. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-30cfg80211: sched_scan_mtx lock in cfg80211_conn_work()Artem Savkov
Introduced in f9f475292dbb0e7035fb6661d1524761ea0888d9 ("cfg80211: always check for scan end on P2P device") cfg80211_conn_scan() which requires sched_scan_mtx to be held can be called from cfg80211_conn_work(). Without this we are hitting multiple warnings like the following: WARNING: at net/wireless/sme.c:88 cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211]() Hardware name: 0578A21 Modules linked in: ... Pid: 620, comm: kworker/3:1 Not tainted 3.9.0-rc4-next-20130328+ #326 Call Trace: [<c1036992>] warn_slowpath_common+0x72/0xa0 [<c10369e2>] warn_slowpath_null+0x22/0x30 [<faa4b0ec>] cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211] [<faa4b344>] cfg80211_conn_do_work+0x94/0x380 [cfg80211] [<faa4c3b2>] cfg80211_conn_work+0xa2/0x130 [cfg80211] [<c1051858>] process_one_work+0x198/0x450 Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/sta_info.c net/wireless/core.h
2013-03-28iwlwifi: dvm: fix the passive-no-RX workaroundJohannes Berg
Alex Romosan reported that since the mac80211 changes in "mac80211: start auth/assoc timeout on frame status" and the subsequent fixes in "mac80211: fix auth/assoc timeout handling" (commits 1672c0e31917 and 89afe614c0c) there's sometimes an issue connecting to a 5 GHz network with the iwlwifi DVM driver. The reason appears to be that since these commits any bad TX status makes mac80211 immediately try again, causing all of the authentication attempts to be quickly rejected by the firmware as it hasn't heard a beacon yet. Before, it would wait for the timeout regardless of status. To fix this, invoke the passive-no-RX workaround when not associated yet as well. This will cause the first frame to get lost, but then the driver will stop the queues and the second attempt will only be transmitted after hearing a beacon, thus delaying it appropriately to not make the firmware reject it again. Reported-by: Alex Romosan <romosan@sycorax.lbl.gov> Tested-by: Alex Romosan <romosan@sycorax.lbl.gov> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-27brcmsmac: remove some pmu functions and use the bcma equivalentsHauke Mehrtens
This removes the following functions: si_pmu_chipcontrol() => bcma_chipco_chipctl_maskset() si_pmu_regcontrol() => bcma_chipco_regctl_maskset() si_pmu_pllcontrol() => bcma_chipco_pll_maskset() si_pmu_pllupd() => bcma_cc_set32() si_pmu_alp_clock() => bcma_chipco_get_alp_clock() This also removed the sih member from struct shared_phy. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: export some gpio functionsHauke Mehrtens
These functions will be used by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: export bcma_chipco_get_alp_clock()Hauke Mehrtens
This function will be used by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: handle more devices in bcma_pmu_get_alp_clock()Hauke Mehrtens
Add some more chip IDs to bcma_pmu_get_alp_clock() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: use BCMA_CC_PMU_CTL_* constantsHauke Mehrtens
Instead of hard coding these values use the existing constants. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: mark eromptr as __iomemHauke Mehrtens
This fixes some sparse warnings. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27Show actual timeout value in failed calibration messages.Robert Shade
The messages are currently hard coding "1ms", which does not match the actual timeout being used. Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27carl9170: remove fast channel change featureChristian Lamparter
Marco Fonseca reported a issue with his carl9170 device: "I'm seeing a problem with the carl driver. If I change channels repeatedly on the 2.4ghz band, monitoring (e.g. tcpdump) will eventually halt. I've seen this on various versions of the carl driver/firmware (both from 1.9.4 to 1.9.7)" <http://marc.info/?l=linux-wireless&m=136381302428113> The culprit was identified as "fast channel change feature" which according to Adrian Chadd is: "... notoriously unreliable and really only fully debugged on some very later chips." <http://marc.info/?l=linux-wireless&m=136416984531380> Therefore, this patch removes the fast channel change feature. The phy will now always have to go through a cold reset when changing channels, but it should no longer become deaf. Cc: Marco Fonseca <marco@tampabay.rr.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27mwl8k: always apply configuration even when device is idleJonas Gorski
Fix settings not being applied when the device is idle and the firmware gets reloaded (because of changing from STA to AP mode). This caused the device using the wrong channel (and likely band), e.g. a 5 GHz only card still defaulted to channel 6 in the 2.4 GHz band when left unconfigured. This issue was always present, but only made visible with "mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionally" (0f4316b9), since before that the channel was (re-)configured at the next _config call even when it did not change from the mac80211 perspective. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add support for adhoc modeHauke Mehrtens
This adds adhoc mode support to brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: activate AP supportHauke Mehrtens
This activates the AP mode support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: deactivate ucode sending probe responsesHauke Mehrtens
It is possible to configure the ucode to automatically send the probe responses to the clients after they send a probe request. At least for WPS the userspace needs to answer the probe requests and we do not know a way to say to the ucode to just handle the normal probe requests, so for now no probe requests should be handled by the ucode. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add support for probe response templateHauke Mehrtens
The ucode is able to answer probe response by itself. This writes such a template into the specific memory. Currently the probe requests are also send to mac80211 so there are more answers send to a requesting client. We have to make the ucode stop sending probe requests to the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: react on changing SSIDHauke Mehrtens
To send the correct probe response the hardware needs to know the SSID when it changed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add beacon template supportHauke Mehrtens
This makes it possible that a beacon template provided by mac80211 is written to the hardware for constant beaconing. This is based on an old version of brcmsmac, on b43 and the spec b43 is based on. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: write beacon period to hardwareHauke Mehrtens
Make brcms_c_set_beacon_period() write the beacon period to the hardware if a new one is set. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_pub->bcmerrHauke Mehrtens
This was a write only member Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->cur_etheraddrHauke Mehrtens
use brcms_pub->cur_etheraddr instead Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-11 21:32:39 +0000