| Age | Commit message (Collapse) | Author |
|---|
|
Don't use signed int for slot indexing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4d15aefebb5e55729dd9b5ec01ab16b70033343.1658742118.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For execlists backend, current implementation of Wa_22011802037 is to
stop the CS before doing a reset of the engine. This WA was further
extended to wait for any pending MI FORCE WAKEUPs before issuing a
reset. Add the extended steps in the execlist path of reset.
In addition, extend the WA to gen11.
v2: (Tvrtko)
- Clarify comments, commit message, fix typos
- Use IS_GRAPHICS_VER for gen 11/12 checks
v3: (Daneile)
- Drop changes to intel_ring_submission since WA does not apply to it
- Log an error if MSG IDLE is not defined for an engine
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt")
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 0667429ce68e0b08f9f1fec8fd0b1f57228f605e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #3
It contains updates for LAN966X devices as follows:
- clock gating support
- gpio restart and network switch for lan966x-pcb8291 board
* tag 'at91-dt-5.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
ARM: dts: lan966x: add clock gating register
Link: https://lore.kernel.org/r/20220722152041.1752962-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
BCM2711 shares an interrupt betweem 5 SPI interfaces (0, 3, 4, 5 & 6).
Another interrupt is shared between SPI1, SPI2 and UART1, which also
affects BCM2835/6/7. Acting on an interrupt intended for another
interface ought to be harmless (although potentially inefficient), but
it can cause this driver to crash - presumably because some critical
state is not ready.
Add a test to the spi-bcm2835 interrupt service routine that
interrupts are enabled on this interface to avoid the crash and
improve efficiency.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Link: https://github.com/raspberrypi/linux/issues/5048
Suggested-by: https://github.com/boe-pi
Co-developed-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220719105305.3076354-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Round 6, Final).
This series fixes data-races around 11 knobs after tcp_pacing_ss_ratio
ipv4_net_table, and this is the final round for ipv4_net_table.
While at it, other data-races around these related knobs are fixed.
- decnet_mem
- decnet_rmem
- tipc_rmem
There are still 58 tables possibly missing some fixes under net/.
$ grep -rnE "struct ctl_table.*?\[\] =" net/ | wc -l
60
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_fib_notify_on_flag_change, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_tcp_reflect_tos, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_tcp_comp_sack_slack_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading these sysctl variables, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.
- .sysctl_rmem
- .sysctl_rwmem
- .sysctl_rmem_offset
- .sysctl_wmem_offset
- sysctl_tcp_rmem[1, 2]
- sysctl_tcp_wmem[1, 2]
- sysctl_decnet_rmem[1]
- sysctl_decnet_wmem[1]
- sysctl_tipc_rmem[1]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed
concurrently. Thus, we need to add READ_ONCE() to their readers.
Fixes: 43e122b014c9 ("tcp: refine pacing rate determination")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mld_{query | report}_work() processes queued events.
If there are too many events in the queue, it re-queue a work.
And then, it returns without in6_dev_put().
But if queuing is failed, it should call in6_dev_put(), but it doesn't.
So, a reference count leak would occur.
THREAD0 THREAD1
mld_report_work()
spin_lock_bh()
if (!mod_delayed_work())
in6_dev_hold();
spin_unlock_bh()
spin_lock_bh()
schedule_delayed_work()
spin_unlock_bh()
Script to reproduce(by Hangbin Liu):
ip netns add ns1
ip netns add ns2
ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1
ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1
ip -n ns1 link add veth0 type veth peer name veth0 netns ns2
ip -n ns1 link set veth0 up
ip -n ns2 link set veth0 up
for i in `seq 50`; do
for j in `seq 100`; do
ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0
ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0
done
done
modprobe -r veth
ip -a netns del
splat looks like:
unregister_netdevice: waiting for veth0 to become free. Usage count = 2
leaked reference.
ipv6_add_dev+0x324/0xec0
addrconf_notify+0x481/0xd10
raw_notifier_call_chain+0xe3/0x120
call_netdevice_notifiers+0x106/0x160
register_netdevice+0x114c/0x16b0
veth_newlink+0x48b/0xa50 [veth]
rtnl_newlink+0x11a2/0x1a40
rtnetlink_rcv_msg+0x63f/0xc00
netlink_rcv_skb+0x1df/0x3e0
netlink_unicast+0x5de/0x850
netlink_sendmsg+0x6c9/0xa90
____sys_sendmsg+0x76a/0x780
__sys_sendmsg+0x27c/0x340
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macsec_add_txsa()
init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.
We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sabrina Dubroca says:
====================
macsec: fix config issues
The patch adding netlink support for XPN (commit 48ef50fa866a
("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)"))
introduced several issues, including a kernel panic reported at [1].
Reproducing those bugs with upstream iproute is limited, since iproute
doesn't currently support XPN. I'm also working on this.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=208315
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.
This fixes several issues:
- the check in validate_add_rxsa doesn't work with 32-bit attributes
- the checks in validate_add_txsa and validate_upd_sa incorrectly
reject X << 32 (with X != 0)
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.
To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.
Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.
Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even if we are now able to tell the kernel to avoid exposing SVE/SME
from the command line, we still have a couple of places where we
unconditionally access the ZCR_EL1 (resp. SMCR_EL1) registers.
On systems with broken firmwares, this results in a crash even if
arm64.nosve (resp. arm64.nosme) was passed on the command-line.
To avoid this, only update cpuinfo_arm64::reg_{zcr,smcr} once
we have computed the sanitised version for the corresponding
feature registers (ID_AA64PFR0 for SVE, and ID_AA64PFR1 for
SME). This results in some minor refactoring.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220720105219.1755096-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* for-next/boot: (34 commits)
arm64: fix KASAN_INLINE
arm64: Add an override for ID_AA64SMFR0_EL1.FA64
arm64: Add the arm64.nosve command line option
arm64: Add the arm64.nosme command line option
arm64: Expose a __check_override primitive for oddball features
arm64: Allow the idreg override to deal with variable field width
arm64: Factor out checking of a feature against the override into a macro
arm64: Allow sticky E2H when entering EL1
arm64: Save state of HCR_EL2.E2H before switch to EL1
arm64: Rename the VHE switch to "finalise_el2"
arm64: mm: fix booting with 52-bit address space
arm64: head: remove __PHYS_OFFSET
arm64: lds: use PROVIDE instead of conditional definitions
arm64: setup: drop early FDT pointer helpers
arm64: head: avoid relocating the kernel twice for KASLR
arm64: kaslr: defer initialization to initcall where permitted
arm64: head: record CPU boot mode after enabling the MMU
arm64: head: populate kernel page tables with MMU and caches on
arm64: head: factor out TTBR1 assignment into a macro
arm64: idreg-override: use early FDT mapping in ID map
...
|
|
* for-next/cpufeature:
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: trap implementation defined functionality in userspace
|
|
* for-next/vdso:
arm64: vdso32: Add DWARF_DEBUG
arm64: vdso32: Shuffle .ARM.exidx section above ELF_DETAILS
arm64: compat: Move sigreturn32.S to .rodata section
arm64: vdso*: place got/plt sections in .rodata
arm64: vdso32: add ARM.exidx* sections
arm64: compat: Move kuser32.S to .rodata section
arm64: vdso32: enable orphan handling for VDSO
arm64: vdso32: put ELF related sections in the linker script
arm64: vdso: enable orphan handling for VDSO
arm64: vdso: put ELF related sections in the linker script
|
|
* for-next/sysregs: (28 commits)
arm64/sysreg: Convert ID_AA64ZFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64SMFR0_EL1 to automatic generation
arm64/sysreg: Convert LORID_EL1 to automatic generation
arm64/sysreg: Convert LORC_EL1 to automatic generation
arm64/sysreg: Convert LORN_EL1 to automatic generation
arm64/sysreg: Convert LOREA_EL1 to automatic generation
arm64/sysreg: Convert LORSA_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64ISAR2_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64ISAR1_EL1 to automatic generation
arm64/sysreg: Convert GMID to automatic generation
arm64/sysreg: Convert DCZID_EL0 to automatic generation
arm64/sysreg: Convert CTR_EL0 to automatic generation
arm64/sysreg: Add _EL1 into ID_AA64ISAR2_EL1 definition names
arm64/sysreg: Add _EL1 into ID_AA64ISAR1_EL1 definition names
arm64/sysreg: Remove defines for RPRES enumeration
arm64/sysreg: Standardise naming for ID_AA64ZFR0_EL1 fields
arm64/sysreg: Standardise naming for ID_AA64SMFR0_EL1 enums
arm64/sysreg: Standardise naming for WFxT defines
arm64/sysreg: Make BHB clear feature defines match the architecture
arm64/sysreg: Align pointer auth enumeration defines with architecture
...
|
|
* for-next/stacktrace:
arm64: Copy the task argument to unwind_state
arm64: Split unwind_init()
arm64: stacktrace: use non-atomic __set_bit
arm64: kasan: do not instrument stacktrace.c
|
|
* for-next/sme:
arm64/fpsimd: Remove duplicate SYS_SVCR read
arm64/signal: Clean up SVE/SME feature checking inconsistency
arm64/sme: Expose SMIDR through sysfs
|
|
* for-next/perf:
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
drivers/perf: riscv_pmu: Add riscv pmu pm notifier
perf: hisi: Extract hisi_pmu_init
perf/marvell_cn10k: Fix TAD PMU register offset
perf/marvell_cn10k: Remove useless license text when SPDX-License-Identifier is already used
arm64: cpufeature: Allow different PMU versions in ID_DFR0_EL1
perf/arm-cci: fix typo in comment
drivers/perf:Directly use ida_alloc()/free()
drivers/perf: Directly use ida_alloc()/free()
|
|
* for-next/mte:
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
|
|
* for-next/mm:
arm64: enable THP_SWAP for arm64
|
|
* for-next/misc:
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: numa: Don't check node against MAX_NUMNODES
arm64: mm: Remove assembly DMA cache maintenance wrappers
arm64/mm: Define defer_reserve_crashkernel()
arm64: fix oops in concurrently setting insn_emulation sysctls
arm64: Do not forget syscall when starting a new thread.
arm64: boot: add zstd support
|
|
* for-next/kpti:
arm64: correct the effect of mitigations off on kpti
arm64: entry: simplify trampoline data page
arm64: mm: install KPTI nG mappings with MMU enabled
arm64: kpti-ng: simplify page table traversal logic
|
|
* for-next/kcsan:
arm64: kcsan: Support detecting more missing memory barriers
asm-generic: Add memory barrier dma_mb()
|
|
* for-next/irqflags-nmi:
arm64: select TRACE_IRQFLAGS_NMI_SUPPORT
arch: make TRACE_IRQFLAGS_NMI_SUPPORT generic
|
|
* for-next/ioremap:
arm64: Add HAVE_IOREMAP_PROT support
arm64: mm: Convert to GENERIC_IOREMAP
mm: ioremap: Add ioremap/iounmap_allowed()
mm: ioremap: Setup phys_addr of struct vm_struct
mm: ioremap: Use more sensible name in ioremap_prot()
ARM: mm: kill unused runtime hook arch_iounmap()
|
|
* for-next/extable:
arm64: extable: cleanup redundant extable type EX_TYPE_FIXUP
arm64: extable: move _cond_extable to _cond_uaccess_extable
arm64: extable: make uaaccess helper use extable type EX_TYPE_UACCESS_ERR_ZERO
arm64: asm-extable: add asm uacess helpers
arm64: asm-extable: move data fields
arm64: extable: add new extable type EX_TYPE_KACCESS_ERR_ZERO support
|
|
* for-next/errata:
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: errata: Add Cortex-A510 to the repeat tlbi list
|
|
* for-next/docs:
Documentation/arm64: update memory layout table.
|
|
* for-next/cpuidle:
arm64: cpuidle: remove generic cpuidle support
cpuidle: cpuidle-arm: remove arm64 support
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* irq/misc-5.20:
: .
: Misc IRQ changes for 5.20:
:
: - Let irq_set_chip_handler_name_locked() take a const struct irq_chip *
:
: - Convert the ocelot irq_chip to being immutable (depends on the above)
:
: - Tidy-up the NOMAP irqdomain API variant
:
: - Teach action_show() to use for_each_action_of_desc()
:
: - Check ioremap() return value in the MIPS GIC driver
:
: - Move MMP driver init function declarations into the common .h
:
: - The obligatory typo fixes
: .
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
pinctrl: ocelot: Make irq_chip immutable
genirq: Allow irq_set_chip_handler_name_locked() to take a const irq_chip
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The functions icu_init_irq and mmp2_init_icu are exported
from this code, so declare them in the header file to avoid
the following sparse warnings:
drivers/irqchip/irq-mmp.c:248:13: warning: symbol 'icu_init_irq' was not declared. Should it be static?
drivers/irqchip/irq-mmp.c:271:13: warning: symbol 'mmp2_init_icu' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
[maz: fixup commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220724222152.551850-1-ben-linux@fluff.org
|
|
The .incbin assembler directive is much faster than bin2c + $(CC).
Do similar refactoring as in
4c0f032d4963 ("s390/purgatory: Omit use of bin2c").
Please note the .quad directive matches to size_t in C (both 8
byte) because the purgatory is compiled only for the 64-bit kernel.
(KEXEC_FILE depends on X86_64).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220725020812.622255-2-masahiroy@kernel.org
|
|
arch/x86/Kbuild guards the entire purgatory/ directory, and
CONFIG_KEXEC_FILE is bool type.
$(CONFIG_KEXEC_FILE) is always 'y' when this directory is being built.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220725020812.622255-1-masahiroy@kernel.org
|
|
Add documentation for Microchip LAN9662 PCB8309.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220722131836.2377720-2-horatiu.vultur@microchip.com
|
|
This adds a quirk for the Crucial P2.
Signed-off-by: Tobias Gruetzmacher <tobias-git@23.gs>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Merge v5.19-rc7 into fixes to bring in:
d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine")
|
|
Add selftests for io_uring zerocopy sends and io_uring's notification
infrastructure. It's largely influenced by msg_zerocopy and uses it on
the receive side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/03d5ec78061cf52db420f88ed0b48eb8f47ce9f7.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring's registered buffers infra has a good performant way of pinning
pages, so let's use SKBFL_MANAGED_FRAG_REFS when our requests are purely
register buffer backed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/278731d3f20caf346cfc025fbee0b4c9ee4ed751.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
