| Age | Commit message (Collapse) | Author |
|---|
|
Pull hwspinlock updates from Bjorn Andersson:
"This contains support for hardware spinlock TI K3 AM65x and J721E
family of SoCs, support for using hwspinlocks from atomic context and
better error reporting when dealing with hardware disabled in
DeviceTree"
* tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
hwspinlock: add the 'in_atomic' API
hwspinlock: document the hwspinlock 'raw' API
hwspinlock: stm32: implement the relax() ops
hwspinlock: ignore disabled device
hwspinlock/omap: Add a trace during probe
hwspinlock/omap: Add support for TI K3 SoCs
dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
|
|
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
Also initial support for vendor specific resource table entries and
support for unprocessed Qualcomm firmware files"
* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
remoteproc: stm32: fix building without ARM SMCC
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
remoteproc: copy parent dma_pfn_offset for vdev
remoteproc: qcom: q6v5-mss: Support loading non-split images
soc: qcom: mdt_loader: Support loading non-split images
remoteproc: stm32: add an ST stm32_rproc driver
dt-bindings: remoteproc: add bindings for stm32 remote processor driver
dt-bindings: stm32: add bindings for ML-AHB interconnect
remoteproc: Use struct_size() helper
remoteproc: add vendor resources handling
remoteproc: imx: Fix typo in "failed"
remoteproc: imx: Broaden the Kconfig selection logic
remoteproc,rpmsg: add missing MAINTAINERS file entries
remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
|
|
If we shut down a process without having destroyed its GWS-using
queues, it is possible that GWS BO will still be in the process
BO list during the gpuvm destruction. This list should be empty
at that time, so we should remove the GWS allocation at the
process uninit point if it is still around.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The register debugfs interface was using the wrong bitmask for vmid
selection for GFX_CNTL.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Optimization for the socket power calculation is introduced.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do not halt driver loading on if_version mismatch. As our
driver and FWs are backward compatible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The interface was used in a confusing way. In profile mode scenario,
the 2nd parameter of the interface was used in a different way from
other scenarios.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As the lock was already held on the entrance to smu_handle_task.
- V2: lock in small granularity
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No access before allocation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix memory allocation failure check.
- V2: fix one more similar error
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Under memory pressure, buffer moves between RAM to VRAM can
fail when there is no GTT space available. In those cases
amdgpu_bo_move falls back to ttm_bo_move_memcpy, which seems to
succeed, although it doesn't really support non-contiguous or
invisible VRAM. This manifests as VM faults with corrupted page
table entries in KFD eviction stress tests.
Print some helpful messages when lack of GTT space is causing buffer
moves to fail. Check that source and destination memory regions are
supported by ttm_bo_move_memcpy before taking that fallback.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not used anymore.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Noticed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull rpmsg updates from Bjorn Andersson:
"This contains a DT binding update and a change to make the remote
function of rpmsg_devices optional"
* tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc:
rpmsg: core: Make remove handler for rpmsg driver optional.
dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
|
|
Pull virtio, vhost updates from Michael Tsirkin:
"Fixes, features, performance:
- new iommu device
- vhost guest memory access using vmap (just meta-data for now)
- minor fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-mmio: add error check for platform_get_irq
scsi: virtio_scsi: Use struct_size() helper
iommu/virtio: Add event queue
iommu/virtio: Add probe request
iommu: Add virtio-iommu driver
PCI: OF: Initialize dev->fwnode appropriately
of: Allow the iommu-map property to omit untranslated devices
dt-bindings: virtio: Add virtio-pci-iommu node
dt-bindings: virtio-mmio: Add IOMMU description
vhost: fix clang build warning
vhost: access vq metadata through kernel virtual address
vhost: factor out setting vring addr and num
vhost: introduce helpers to get the size of metadata area
vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
vhost: fine grain userspace memory accessors
vhost: generalize adding used elem
|
|
Pull VFIO updates from Alex Williamson:
- Static symbol cleanup in mdev samples (Kefeng Wang)
- Use vma help in nvlink code (Peng Hao)
- Remove unused code in mbochs sample (YueHaibing)
- Send uevents around mdev registration (Alex Williamson)
* tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio:
mdev: Send uevents around parent device registration
sample/mdev/mbochs: remove set but not used variable 'mdev_state'
vfio: vfio_pci_nvlink2: use a vma helper function
vfio-mdev/samples: make some symbols static
|
|
DM provided its own ratelimiting printk wrapper but given printk
advances this is no longer needed.
Also, switching DMDEBUG_LIMIT to using pr_debug_ratelimited() fixes the
reported issue where DMDEBUG_LIMIT() still caused a flood of "callbacks
suppressed" messages.
Reported-by: Milan Broz <gmazyland@gmail.com>
Depends-on: 29fc2bc7539386 ("printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A quiet cycle this time.
- ds1307: properly handle oscillator failure flags
- imx-sc: alarm support
- pcf2123: alarm support, correct offset handling
- sun6i: add R40 support
- simplify getting the adapter of an i2c client"
* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
rtc: wm831x: Add IRQF_ONESHOT flag
rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
rtc: pcf2123: Fix build error
rtc: interface: Change type of 'count' from int to u64
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
rtc: pcf8563: Fix interrupt trigger method
rtc: pcf2123: fix negative offset rounding
rtc: pcf2123: add alarm support
rtc: pcf2123: use %ptR
rtc: pcf2123: port to regmap
rtc: pcf2123: remove sysfs register view
rtc: rx8025: simplify getting the adapter of a client
rtc: rx8010: simplify getting the adapter of a client
rtc: rv8803: simplify getting the adapter of a client
rtc: m41t80: simplify getting the adapter of a client
rtc: fm3130: simplify getting the adapter of a client
rtc: tegra: Drop MODULE_ALIAS
rtc: sun6i: Add R40 compatible
dt-bindings: rtc: sun6i: Add the R40 RTC compatible
dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
...
|
|
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
|
|
Pull MIPS updates from Paul Burton:
"A light batch this time around but significant improvements for
certain systems:
- Removal of readq & writeq for MIPS32 kernels where they would
simply BUG() anyway, allowing drivers or other code that #ifdefs on
their presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure
a bunch more devices.
- Miscellaneous cleanups & build fixes"
* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS: fix some more fall through errors in arch/mips
MIPS: perf events: handle switch statement falling through warnings
mips/kprobes: Export kprobe_fault_handler()
MAINTAINERS: Add myself as Ingenic SoCs maintainer
MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
MIPS: lantiq: Add SMP support for lantiq interrupt controller
MIPS: lantiq: Shorten register names, remove unused macros
MIPS: lantiq: Fix bitfield masking
MIPS: lantiq: Remove unused macros
MIPS: lantiq: Fix attributes of of_device_id structure
MIPS: lantiq: Change variables to the same type as the source
MIPS: lantiq: Move macro directly to iomem function
mips: Remove q-accessors from non-64bit platforms
FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
MIPS: configs: Remove useless UEVENT_HELPER_PATH
...
|
|
git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull h8300 update from Yoshinori Sato:
"Remove unused barrier defines"
* tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
H8300: remove unused barrier defines
|
|
git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull SH updates from Yoshinori Sato.
kprobe fix, defconfig updates and a SH Kconfig fix.
* tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
sh: configs: Remove useless UEVENT_HELPER_PATH
Fix allyesconfig output.
|
|
The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.
The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.
Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.
There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
|
|
Currently, kcopyd has a sub-job size of 64KB and a maximum number of 8
sub-jobs. As a result, for any kcopyd job, we have a maximum of 512KB of
I/O in flight.
This upper limit to the amount of in-flight I/O under-utilizes fast
devices and results in decreased throughput, e.g., when writing to a
snapshotted thin LV with I/O size less than the pool's block size (so
COW is performed using kcopyd).
Increase kcopyd's default sub-job size to 512KB, so we have a maximum of
4MB of I/O in flight for each kcopyd job. This results in an up to 96%
improvement of bandwidth when writing to a snapshotted thin LV, with I/O
sizes less than the pool's block size.
Also, add dm_mod.kcopyd_subjob_size_kb module parameter to allow users
to fine tune the sub-job size of kcopyd. The default value of this
parameter is 512KB and the maximum allowed value is 1024KB.
We evaluate the performance impact of the change by running the
snap_breaking_throughput benchmark, from the device mapper test suite
[1].
The benchmark:
1. Creates a 1G thin LV
2. Provisions the thin LV
3. Takes a snapshot of the thin LV
4. Writes to the thin LV with:
dd if=/dev/zero of=/dev/vg/thin_lv oflag=direct bs=<I/O size>
Running this benchmark with various thin pool block sizes and dd I/O
sizes (all combinations triggering the use of kcopyd) we get the
following results:
+-----------------+-------------+------------------+-----------------+
| Pool block size | dd I/O size | BW before (MB/s) | BW after (MB/s) |
+-----------------+-------------+------------------+-----------------+
| 1 MB | 256 KB | 242 | 280 |
| 1 MB | 512 KB | 238 | 295 |
| | | | |
| 2 MB | 256 KB | 238 | 354 |
| 2 MB | 512 KB | 241 | 380 |
| 2 MB | 1 MB | 245 | 394 |
| | | | |
| 4 MB | 256 KB | 248 | 412 |
| 4 MB | 512 KB | 234 | 432 |
| 4 MB | 1 MB | 251 | 474 |
| 4 MB | 2 MB | 257 | 504 |
| | | | |
| 8 MB | 256 KB | 239 | 420 |
| 8 MB | 512 KB | 256 | 431 |
| 8 MB | 1 MB | 264 | 467 |
| 8 MB | 2 MB | 264 | 502 |
| 8 MB | 4 MB | 281 | 537 |
+-----------------+-------------+------------------+-----------------+
[1] https://github.com/jthornber/device-mapper-test-suite
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
__find_snapshots_sharing_cow() should always be used with _origins_lock
held so fix snapshot_io_hints() accordingly. Also, once a snapshot is
being merged discards must not be allowed -- otherwise incorrect or
duplicate work will be performed.
Fixes: 2e6023850e177d ("dm snapshot: add optional discard support features")
Reported-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the
backend device is being actively read or written and so cannot be
reclaimed. This flag is set as long as the zone atomic reference
counter is not 0. When this atomic is decremented and reaches 0 (e.g.
on BIO completion), the active flag is cleared and set again whenever
the zone is reused and BIO issued with the atomic counter incremented.
These 2 operations (atomic inc/dec and flag set/clear) are however not
always executed atomically under the target metadata mutex lock and
this causes the warning:
WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags));
in dmz_deactivate_zone() to be displayed. This problem is regularly
triggered with xfstests generic/209, generic/300, generic/451 and
xfs/077 with XFS being used as the file system on the dm-zoned target
device. Similarly, xfstests ext4/303, ext4/304, generic/209 and
generic/300 trigger the warning with ext4 use.
This problem can be easily fixed by simply removing the DMZ_ACTIVE flag
and managing the "ACTIVE" state by directly looking at the reference
counter value. To do so, the functions dmz_activate_zone() and
dmz_deactivate_zone() are changed to inline functions respectively
calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro
is changed to an inline function calling atomic_read().
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Move internal function declarations out of fs/internal.h into
include/linux/iomap.h so that our transition is complete.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the main iteration code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the buffered IO code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the direct IO code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the SEEK_HOLE/SEEK_DATA code into a separate file so that we can
group related functions in a single file instead of having a single
enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the file mapping reporting code (FIEMAP/FIBMAP) into a separate
file so that we can group related functions in a single file instead of
having a single enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the swapfile activation code into a separate file so that we can
group related functions in a single file instead of having a single
enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.
This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:
[ 0.772876] general protection fault: 0000 [#1] SMP NOPTI
[ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[ 0.772893] RIP: e030:int3_magic+0x0/0x7
[ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[ 0.773334] Call Trace:
[ 0.773334] alternative_instructions+0x3d/0x12e
[ 0.773334] check_bugs+0x7c9/0x887
[ 0.773334] ? __get_locked_pte+0x178/0x1f0
[ 0.773334] start_kernel+0x4ff/0x535
[ 0.773334] ? set_init_arg+0x55/0x55
[ 0.773334] xen_start_kernel+0x571/0x57a
For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.
E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
pop %rcx;
pop %r11;
jmp xenint3
As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
PVH guest needs PV extentions to work, so "nopv" parameter should be
ignored for PVH but not for HVM guest.
If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early,
we know it's PVH guest and ignore "nopv" parameter directly.
If PVH guest boots up via the normal boot entry same as HVM guest, it's
hard to distinguish PVH and HVM guest at that time. In this case, we
have to panic early if PVH is detected and nopv is enabled to avoid a
worse situation later.
Remove static from bool_x86_init_noop/x86_op_int_noop so they could be
used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init()
to avoid compile error.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as "nopv" support needs it to be changeable at boot up stage.
Checkpatch reports warning, so move variable declarations from
hypervisor.c to hypervisor.h
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Clean up unnecessory code after that operation.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In virtualization environment, PV extensions (drivers, interrupts,
timers, etc) are enabled in the majority of use cases which is the
best option.
However, in some cases (kexec not fully working, benchmarking)
we want to disable PV extensions. We have "xen_nopv" for that purpose
but only for XEN. For a consistent admin experience a common command
line parameter "nopv" set across all PV guest implementations is a
better choice.
There are guest types which just won't work without PV extensions,
like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to
struct hypervisor_x86 set to true for those guest types and call
the detect functions only if nopv is false or ignore_nopv is true.
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as they are only called at early bootup stage. In fact, other
functions in x86_hyper_xen_hvm.init.* are all marked as __init.
Unexport xen_hvm_need_lapic as it's never used outside.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The Xen tmem (transcendent memory) driver can be removed, as the
related Xen hypervisor feature never made it past the "experimental"
state and will be removed in future Xen versions (>= 4.13).
The xen-selfballoon driver depends on tmem, so it can be removed, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
initialized"
This reverts commit ca5d376e17072c1b60c3fee66f3be58ef018952d.
Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching
early") adds jump_label_init() call in setup_arch() to make static
keys initialized early, so we could use the original simpler code
again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab472389df ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch fixes below sparse warning related to __virtio
type in virtio pmem driver. This is reported by Intel test
bot on linux-next tree.
nd_virtio.c:56:28: warning: incorrect type in assignment
(different base types)
nd_virtio.c:56:28: expected unsigned int [unsigned] [usertype] type
nd_virtio.c:56:28: got restricted __virtio32
nd_virtio.c:93:59: warning: incorrect type in argument 2
(different base types)
nd_virtio.c:93:59: expected restricted __virtio32 [usertype] val
nd_virtio.c:93:59: got unsigned int [unsigned] [usertype] ret
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
RocksDB can hang indefinitely when using a DAX file. This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry. We use the wrong index in the hash and end up waiting on
the wrong waitqueue.
There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).
We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd800682f ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kmalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
Also, notice that variable size is unnecessary, hence it is removed.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
locked_vm accounting is done roughly the same way in five places, so
unify them in a helper.
Include the helper's caller in the debug print to distinguish between
callsites.
Error codes stay the same, so user-visible behavior does too. The one
exception is that the -EPERM case in tce_account_locked_vm is removed
because Alexey has never seen it triggered.
[daniel.m.jordan@oracle.com: v3]
Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
[sfr@canb.auug.org.au: fix mm/util.c]
Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alan Tull <atull@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
[robin.murphy@arm.com: build fixes]
Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com
Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
with the long-out-of-date comment can lead to the impression than an
architecture may just enable it (since __add_pages() now "comprehends
device memory" for itself) and expect things to work.
In practice, however, ZONE_DEVICE users have little chance of
functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
dependency so the real situation is clearer.
Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to
make them all consistent in depending on their respective config options
even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons. This
allows a little more compile-time optimisation as well as the conceptual
and cosmetic cleanup.
Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
