| Age | Commit message (Collapse) | Author |
|---|
|
Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).
Also included are y2038 conversion patches from Arnd, a pile of
miscellaneous fixes from Chengguang and Zheng's feature bit
infrastructure for the filesystem"
* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
ceph: don't drop message if it contains more data than expected
ceph: support cephfs' own feature bits
crush: fix using plain integer as NULL warning
libceph: remove unnecessary non NULL check for request_key
ceph: refactor error handling code in ceph_reserve_caps()
ceph: refactor ceph_unreserve_caps()
ceph: change to void return type for __do_request()
ceph: compare fsc->max_file_size and inode->i_size for max file size limit
ceph: add additional size check in ceph_setattr()
ceph: add additional offset check in ceph_write_iter()
ceph: add additional range check in ceph_fallocate()
ceph: add new field max_file_size in ceph_fs_client
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
libceph: check authorizer reply/challenge length before reading
libceph: implement CEPHX_V2 calculation mode
libceph: add authorizer challenge
libceph: factor out encrypt_authorizer()
libceph: factor out __ceph_x_decrypt()
libceph: factor out __prepare_write_connect()
libceph: store ceph_auth_handshake pointer in ceph_connection
...
|
|
Prior to the introduction of fib6_info lwtstate was managed by the dst
code. With fib6_info releasing lwtstate needs to be done when the struct
is freed.
Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"It is now possible to add custom sysfs attributes while avoiding a
possible race condition. Unused code has been removed resulting in a
nice reduction of the code base. And more drivers have been switched
to SPDX by their maintainers.
Summary:
Subsystem:
- new helpers to add custom sysfs attributes
- struct rtc_task removal along with rtc_irq_[un]register()
- rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
Drivers:
- armada38x: reset after rtc power loss
- ds1307: now supports m41t11
- isl1208: now supports isl1219 and tamper detection
- pcf2127: internal SRAM support"
* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1307: simplify hwmon config
rtc: s5m: Add SPDX license identifier
rtc: maxim: Add SPDX license identifiers
rtc: isl1219: add device tree documentation
rtc: isl1208: set ev-evienb bit from device tree
rtc: isl1208: Add "evdet" interrupt source for isl1219
rtc: isl1208: add support for isl1219 with tamper detection
rtc: sysfs: facilitate attribute add to rtc device
rtc: remove struct rtc_task
char: rtc: remove task handling
rtc: pcf85063: preserve control register value between stop and start
rtc: sh: remove unused variable rtc_dev
rtc: unexport rtc_irq_set_*
rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
rtc: remove irq_task and irq_task_lock
rtc: remove rtc_irq_register/rtc_irq_unregister
rtc: sh: remove dead code
rtc: sa1100: don't set PIE frequency
rtc: ds1307: support m41t11 variant
rtc: ds1307: fix data pointer to m41t0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:
"Code cleanups from Kamalesh Babulal"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Validate module/old func name length
livepatch: Remove reliable stacktrace check in klp_try_switch_task()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- touch_max detection improvements and quirk handling fixes in wacom
driver from Jason Gerecke and Ping Cheng
- Palm rejection from Dmitry Torokhov and _dial support from Benjamin
Tissoires for hid-multitouch driver
- Low voltage support for i2c-hid driver from Stephen Boyd
- Guitar-Hero support from Nicolas Adenis-Lamarre
- other assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits)
HID: intel_ish-hid: tx_buf memory leak on probe/remove
HID: intel-ish-hid: Prevent loading of driver on Mehlow
HID: cougar: Add support for the Cougar 500k Gaming Keyboard
HID: cougar: make compare_device_paths reusable
HID: intel-ish-hid: remove redundant variable num_frags
HID: multitouch: handle palm for touchscreens
HID: multitouch: touchscreens also use confidence reports
HID: multitouch: report MT_TOOL_PALM for non-confident touches
HID: microsoft: support the Surface Dial
HID: core: do not upper bound the collection stack
HID: input: enable Totem on the Dell Canvas 27
HID: multitouch: remove one copy of values
HID: multitouch: ditch mt_report_id
HID: multitouch: store a per application quirks value
HID: multitouch: Store per collection multitouch data
HID: multitouch: make sure the static list of class is not changed
input: add MT_TOOL_DIAL
HID: elan: Add support for touchpad on the Toshiba Click Mini L9W
HID: elan: Add USB-id for HP x2 10-n000nd touchpad
HID: elan: Add a flag for selecting if the touchpad has a LED
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Remove unused/obsolete code/comments
New Functionality:
- Allow less granular brightness specification for high-res PWMs; pwm_bl
- Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl
Fix-ups:
- Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl
Bug Fixes:
- Fix uninitialised variable; pwm_bl"
* tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Fix uninitialized variable
backlight: adp8860: Mark expected switch fall-through
backlight: Remove obsolete comment for ->state
dt-bindings: pwm-backlight: Move brightness-levels to optional
backlight: pwm_bl: Compute brightness of LED linearly to human eye
dt-bindings: pwm-backlight: Add a num-interpolation-steps property
backlight: pwm_bl: Linear interpolation between brightness-levels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from
Takashi Iwai"
* tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]
|
|
Various architectures fail to build properly with older versions of the
gcc compiler.
An example from Guenter Roeck in thread [1]:
>
> In file included from ./include/linux/mm.h:17:0,
> from ./include/linux/pid_namespace.h:7,
> from ./include/linux/ptrace.h:10,
> from arch/openrisc/kernel/asm-offsets.c:32:
> ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct
>
> This is just an example with gcc 4.5.1 for or32. I have seen the problem
> with gcc 4.4 (for unicore32) as well.
So update the minimum required version of gcc to 4.6.
[1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/
Miscellanea:
- Update Documentation/process/changes.rst
- Remove and consolidate version test blocks in compiler-gcc.h for
versions lower than 4.6
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This switches xtensa arch to the generic noncoherent direct mapping
operations, adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute and
allows for platform-specific handling of coherent memory.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There's a new Dell TB16 dock with a different iSerialNumber.
Apply the same fix from commit 0b1655143df0 ("r8152: disable RX
aggregation on Dell TB16 dock") to this model.
BugLink: https://bugs.launchpad.net/bugs/1785780
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
test_kc705_be is a big-endian Xtensa core with HiFi2 instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Drop unneeded headers, rewrite literal definitions with .literal.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
A kernel may not need any boot parameters from the bootloader, allow
disabling bootparam parsing in that case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
If an xtensa core provides an additional IRQ controller it should be
treated as a separate piece of hardware and be driven by an irqchip
driver.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
platform/hardware.h no longer supply any information for processor.h,
vectors.h, setup.c or vmlinux.lds.S, don't include it.
This header is now empty in the platforms/iss, so remove it altogether.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Drop PLATFORM_DEFAULT_MEM_START from the platform/hardware.h headers.
Provide definition of CONFIG_DEFAULT_MEM_START always, allow changing it
only in noMMU configurations when PLATFORM_WANT_DEFAULT_MEM is selected.
Change prompt and description so that it's clear that it controls
PAGE_OFFSET and PHYS_OFFSET.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Now that noMMU cache attributes are set up separately drop no longer
used macro PLATFORM_DEFAULT_MEM_SIZE and config symbol
CONFIG_DEFAULT_MEM_SIZE used for setting it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Commit 0bbf47eab469 ("ia64: use asm-generic/io.h") results in a BUG
while booting ia64. This is because asm-generic/io.h defines
PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace()
doing a lot of unnecessary (and wrong) things.
I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested
keeping the fix inside the arch/ia64 tree.
Fixes: 0bbf47eab469 ("ia64: use asm-generic/io.h")
Suggested-by: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When thermal zone is in passive mode, disabling its mode from
sysfs is NOT taking effect at all, it is still polling the
temperature of the disabled thermal zone and handling all thermal
trips, it makes user confused. The disabling operation should
disable the thermal zone behavior completely, for both active and
passive mode, this patch clears the passive_delay when thermal
zone is disabled and restores it when it is enabled.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Commit 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in
init_hypervisor_platform()") moved the mapping of the shared info area
before pagetable_init(). This breaks booting as 32-bit PV guest as the
use of set_fixmap isn't possible at this time on 32-bit.
This can be worked around by populating the needed PMD on 32-bit
kernel earlier.
In order not to reimplement populate_extra_pte() using extend_brk()
for allocating new page tables extend alloc_low_pages() to do that in
case the early page table pool is not yet available.
Fixes: 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Remove Xen hypercall functions which are used nowhere in the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
xen_auto_xlated_memory_setup() is a leftover from PVH V1. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This is unnecessary and triggers a warning in the hypervisor.
Often systems have more processor entries in their ACPI tables than are
actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be
reliably used, but the ACPI_MADT_ENABLED bit can. In order to not
introduce new functions in the main ACPI processor driver code, simply
use acpi_get_phys_id(), which does more than we need, but which checks
the MADT enabled bit in the process. Any CPU for which we can't
determine the APIC ID is unlikely to work properly anyway, so the extra
checks done by acpi_get_phys_id() should do no harm.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
As the sequence of invocations matters, add "tty" only after "hvc" when
a VGA console is available (which is often the case for Dom0, but hardly
ever for DomU).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This already gets done in HYPERVISOR_mca().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Its only caller is __init, so to avoid section mismatch warnings when a
compiler decides to not inline the function marke this function so as
well. Take the opportunity and also make the function actually use its
argument: The sole caller passes in zero anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
As original license mentioned, it is GPL-2.0 in SPDX.
Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL".
See ${LINUX}/include/linux/module.h
"GPL" [GNU Public License v2 or later]
"GPL v2" [GNU Public License v2]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Tomer Tayar says:
====================
qed: Misc fixes in the interface with the MFW
This patch series fixes several issues in the driver's interface with the
management FW (MFW).
v1->v2:
- Fix loop counter decrement to be pre instead of post.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Keep sending mailbox commands to the MFW when it is not responsive ends up
with a redundant amount of timeout expiries.
This patch prints the MCP status on the first command which is not
responded, and blocks the following commands.
Since the (un)load request commands might be not responded due to other
PFs, the patch also adds the option to skip the blocking upon a failure.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurrent load or unload of PFs.
This patch adds the option to sleep within the busy-waiting, and uses it
for the (un)load requests (which are not sent from an interrupt context) to
prevent the possible deadlock.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Successive iterations of halting and resuming the management chip (MCP)
might fail, since currently the driver doesn't wait for these operations to
actually take place.
This patch prevents the driver from moving forward before the operations
are reflected in the state register.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready indication.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
This contains a pair of patches that together fix sys_riscv_flush_icache
on all systems:
* The first enables sys_riscv_flush_icache() for non-SMP systems.
* The second fixes a bug in our syscall header that caused
sys_riscv_flush_icache to never get generated.
|
|
There is no need to assign zero to the variable 'site' and then
perform a compound bitwise OR operation afterwards.
Make it simpler by assigning the final 'site' value directly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
By using the managed devm_thermal_zone_of_sensor_register() we can
drop the explicit call to thermal_zone_of_sensor_unregister() in the
qoriq_tmu_remove() function, which simplifies the code a bit.
So switch to devm_thermal_zone_of_sensor_register().
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
riscv does not enable CONFIG_COMPAT in default configurations:
defconfig, allmodconfig and allnoconfig.
Remove the asm/compat.h as it does not seem to add any value to
the architecture without CONFIG_COMPAT.
Now that time compat syscalls are being reused in non CONFIG_COMPAT
modes, asm-generic/compat.h provides definitions for riscv 32 bit
mode.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: palmer@sifive.com
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This file is expected to be included multiple times in the same file in
order to allow the __SYSCALL macro to generate system call tables. With
a global include guard we end up missing __NR_riscv_flush_icache in the
syscall table, which results in icache flushes that escape the vDSO call
to not actually do anything.
The fix is to move to per-#define include guards, which allows the
system call tables to actually be populated. Thanks to Macrus Comstedt
for finding and fixing the bug!
Cc: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This would be necessary to make non-SMP builds work, but there is
another error in the implementation of our syscall linkage that actually
just causes sys_riscv_flush_icache to never build. I've build tested
this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like
normal.
CC: Christoph Hellwig <hch@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
In-Reply-To: <20180809055830.GA17533@infradead.org>
In-Reply-To: <20180809132612.GA31058@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
If the system BIOS does not supply NUMA node information to the
PCI devices, the NUMA node is selected by choosing the current
node.
This can lead to the following crash:
divide error: 0000 SMP
CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G IOE
------------ 3.10.0-693.21.1.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS
SE5C610.86B.01.01.0005.101720141054 10/17/2014
Workqueue: events work_for_cpu_fn
task: ffff880174480fd0 ti: ffff880174488000 task.ti: ffff880174488000
RIP: 0010: [<ffffffffc020ac69>] hfi1_dev_affinity_init+0x129/0x6a0 [hfi1]
RSP: 0018:ffff88017448bbf8 EFLAGS: 00010246
RAX: 0000000000000011 RBX: ffff88107ffba6c0 RCX: ffff88085c22e130
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880824ad0000
RBP: ffff88017448bc48 R08: 0000000000000011 R09: 0000000000000002
R10: ffff8808582b6ca0 R11: 0000000000003151 R12: ffff8808582b6ca0
R13: ffff8808582b6518 R14: ffff8808582b6010 R15: 0000000000000012
FS: 0000000000000000(0000) GS:ffff88085ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efc707404f0 CR3: 0000000001a02000 CR4: 00000000001607f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
hfi1_init_dd+0x14b3/0x27a0 [hfi1]
? pcie_capability_write_word+0x46/0x70
? hfi1_pcie_init+0xc0/0x200 [hfi1]
do_init_one+0x153/0x4c0 [hfi1]
? sched_clock_cpu+0x85/0xc0
init_one+0x1b5/0x260 [hfi1]
local_pci_probe+0x4a/0xb0
work_for_cpu_fn+0x1a/0x30
process_one_work+0x17f/0x440
worker_thread+0x278/0x3c0
? manage_workers.isra.24+0x2a0/0x2a0
kthread+0xd1/0xe0
? insert_kthread_work+0x40/0x40
ret_from_fork+0x77/0xb0
? insert_kthread_work+0x40/0x40
If the BIOS is not supplying NUMA information:
- set the default table count to 1 for all possible nodes
- select node 0 (instead of current NUMA) node to get consistent
performance
- generate an error indicating that the BIOS should be upgraded
Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
|
|
In preparation of enabling -Wimplicit-fallthrough, mark switch cases which
fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: https://lkml.kernel.org/r/20180816172124.GA2407@embeddedor.com
|
|
Use clear_mce_nospec() to restore WB mode for the kernel linear mapping
of a pmem page that was marked 'HWPoison'. A page with 'HWPoison' set
has also been marked UC in PAT (page attribute table) via
set_mce_nospec() to prevent speculative retrievals of poison.
The 'HWPoison' flag is only cleared when overwriting an entire page.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Currently memory_failure() returns zero if the error was handled. On
that result mce_unmap_kpfn() is called to zap the page out of the kernel
linear mapping to prevent speculative fetches of potentially poisoned
memory. However, in the case of dax mapped devmap pages the page may be
in active permanent use by the device driver, so it cannot be unmapped
from the kernel.
Instead of marking the page not present, marking the page UC should
be sufficient for preventing poison from being pre-fetched into the
cache. Convert mce_unmap_pfn() to set_mce_nospec() remapping the page as
UC, to hide it from speculative accesses.
Given that that persistent memory errors can be cleared by the driver,
include a facility to restore the page to cacheable operation,
clear_mce_nospec().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <linux-edac@vger.kernel.org>
Cc: <x86@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for using set_memory_uc() instead set_memory_np() for
isolating poison from speculation, teach the memtype code to sanitize
physical addresses vs __PHYSICAL_MASK.
The motivation for using set_memory_uc() for this case is to allow
ongoing access to persistent memory pages via the pmem-driver +
memcpy_mcsafe() until the poison is repaired.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <linux-edac@vger.kernel.org>
Cc: <x86@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Guitar-Hero devices support for hid-wiimote
|
|
Wacom driver updates:
- touch_max detection improvements
- quirk handling cleanup
- get rid of wacom custom usages
|
