summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-04Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-04-04 We've added 7 non-merge commits during the last 5 day(s) which contain a total of 9 files changed, 75 insertions(+), 24 deletions(-). The main changes are: 1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to incorrect destination IP calculation and incorrect IP for relocations, from Uros Bizjak and Joan Bruguera Micó. 2) Fix BPF arena file descriptor leaks in the verifier, from Anton Protopopov. 3) Defer bpf_link deallocation to after RCU grace period as currently running multi-{kprobes,uprobes} programs might still access cookie information from the link, from Andrii Nakryiko. 4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported by syzkaller, from Jakub Sitnicki. 5) Fix resolve_btfids build with musl libc due to missing linux/types.h include, from Natanael Copa. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Prevent lock inversion deadlock in map delete elem x86/bpf: Fix IP for relocating call depth accounting x86/bpf: Fix IP after emitting call depth accounting bpf: fix possible file descriptor leaks in verifier tools/resolve_btfids: fix build with musl libc bpf: support deferring bpf_link dealloc to after RCU grace period bpf: put uprobe link's path and task in release callback ==================== Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04PM: EM: fix wrong utilization estimation in em_cpu_energy()Vincent Guittot
Commit 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove division") has added back map_util_perf() in em_cpu_energy() computation which has been removed with the rework of scheduler/cpufreq interface. This is wrong because sugov_effective_cpu_perf() already takes care of mapping the utilization to a performance level. Fixes: 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove division") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-04gpio: cdev: fix missed label sanitizing in debounce_setup()Kent Gibson
When adding sanitization of the label, the path through edge_detector_setup() that leads to debounce_setup() was overlooked. A request taking this path does not allocate a new label and the request label is freed twice when the request is released, resulting in memory corruption. Add label sanitization to debounce_setup(). Cc: stable@vger.kernel.org Fixes: b34490879baa ("gpio: cdev: sanitize the label before requesting the interrupt") Signed-off-by: Kent Gibson <warthog618@gmail.com> [Bartosz: rebased on top of the fix for empty GPIO labels] Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-04selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWNShengyu Li
This patch addresses an issue in the selftests/harness where an assertion within FIXTURE_TEARDOWN could trigger an infinite loop. The problem arises because the teardown procedure is meant to execute once, but the presence of failing assertions (ASSERT_EQ(0, 1)) leads to repeated attempts to execute teardown due to the long jump mechanism used by the harness for handling assertions. To resolve this, the patch ensures that the teardown process runs only once, regardless of assertion outcomes, preventing the infinite loop and allowing tests to fail. A simple test demo(test.c): #include "kselftest_harness.h" FIXTURE(f) { int fd; }; FIXTURE_SETUP(f) { self->fd = 0; } FIXTURE_TEARDOWN(f) { TH_LOG("TEARDOWN"); ASSERT_EQ(0, 1); self->fd = -1; } TEST_F(f, open_close) { ASSERT_NE(self->fd, 1); } TEST_HARNESS_MAIN will always output the following output due to a dead loop until timeout: # test.c:15:open_close:TEARDOWN # test.c:16:open_close:Expected 0 (0) == 1 (1) # test.c:15:open_close:TEARDOWN # test.c:16:open_close:Expected 0 (0) == 1 (1) ... But here's what we should and expect to get: TAP version 13 1..1 # Starting 1 tests from 2 test cases. # RUN f.open_close ... # test.c:15:open_close:TEARDOWN # test.c:16:open_close:Expected 0 (0) == 1 (1) # open_close: Test terminated by assertion # FAIL f.open_close not ok 1 f.open_close # FAILED: 0 / 1 tests passed. # Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0 also this is related to the issue mentioned in this patch https://patchwork.kernel.org/project/linux-kselftest/patch/e2ba3f8c-80e6-477d-9cea-1c9af820e0ed@alu.unizg.hr/ Signed-off-by: Shengyu Li <shengyu.li.evgeny@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-04-04netfilter: validate user input for expected lengthEric Dumazet
I got multiple syzbot reports showing old bugs exposed by BPF after commit 20f2505fb436 ("bpf: Try to avoid kzalloc in cgroup/{s,g}etsockopt") setsockopt() @optlen argument should be taken into account before copying data. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238 CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a RIP: 0033:0x7fd22067dde9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9 RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8 </TASK> Allocated by task 7238: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:4069 [inline] __kmalloc_noprof+0x200/0x410 mm/slub.c:4082 kmalloc_noprof include/linux/slab.h:664 [inline] __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a The buggy address belongs to the object at ffff88802cd73da0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73 flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff) page_type: 0xffffefff(slab) raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122 raw: ffff88802cd73020 000000008080007f 00000001ffffefff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5103, tgid 2119833701 (syz-executor.4), ts 5103, free_ts 70804600828 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1490 prep_new_page mm/page_alloc.c:1498 [inline] get_page_from_freelist+0x2e7e/0x2f40 mm/page_alloc.c:3454 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4712 __alloc_pages_node_noprof include/linux/gfp.h:244 [inline] alloc_pages_node_noprof include/linux/gfp.h:271 [inline] alloc_slab_page+0x5f/0x120 mm/slub.c:2249 allocate_slab+0x5a/0x2e0 mm/slub.c:2412 new_slab mm/slub.c:2465 [inline] ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3615 __slab_alloc+0x58/0xa0 mm/slub.c:3705 __slab_alloc_node mm/slub.c:3758 [inline] slab_alloc_node mm/slub.c:3936 [inline] __do_kmalloc_node mm/slub.c:4068 [inline] kmalloc_node_track_caller_noprof+0x286/0x450 mm/slub.c:4089 kstrdup+0x3a/0x80 mm/util.c:62 device_rename+0xb5/0x1b0 drivers/base/core.c:4558 dev_change_name+0x275/0x860 net/core/dev.c:1232 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2864 __rtnl_newlink net/core/rtnetlink.c:3680 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3727 rtnetlink_rcv_msg+0x89b/0x10d0 net/core/rtnetlink.c:6594 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2559 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 page last free pid 5146 tgid 5146 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1110 [inline] free_unref_page+0xd3c/0xec0 mm/page_alloc.c:2617 discard_slab mm/slub.c:2511 [inline] __put_partials+0xeb/0x130 mm/slub.c:2980 put_cpu_partial+0x17c/0x250 mm/slub.c:3055 __slab_free+0x2ea/0x3d0 mm/slub.c:4254 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x9e/0x140 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:322 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3888 [inline] slab_alloc_node mm/slub.c:3948 [inline] __do_kmalloc_node mm/slub.c:4068 [inline] __kmalloc_node_noprof+0x1d7/0x450 mm/slub.c:4076 kmalloc_node_noprof include/linux/slab.h:681 [inline] kvmalloc_node_noprof+0x72/0x190 mm/util.c:634 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_rehash_alloc+0x9e/0x290 lib/rhashtable.c:367 rht_deferred_worker+0x4e1/0x2440 lib/rhashtable.c:427 process_one_work kernel/workqueue.c:3218 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299 worker_thread+0x86d/0xd70 kernel/workqueue.c:3380 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 Memory state around the buggy address: ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc >ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc ^ ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20240404122051.2303764-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04Merge tag 'nf-24-04-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 unlike early commit path stage which triggers a call to abort, an explicit release of the batch is required on abort, otherwise mutex is released and commit_list remains in place. Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise async GC worker could collect expired objects. Patch #3 flush pending destroy work in module removal path, otherwise UaF is possible. Patch #4 and #6 restrict the table dormant flag with basechain updates to fix state inconsistency in the hook registration. Patch #5 adds missing RCU read side lock to flowtable type to avoid races with module removal. * tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: discard table flag update with pending basechain deletion netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: flush pending destroy work before exit_net release netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path netfilter: nf_tables: release batch on table validation from abort path ==================== Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf) This series contains updates to ice and idpf drivers. Dan Carpenter initializes some pointer declarations to NULL as needed for resource cleanup on ice driver. Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering in legacy mode for ice. Joshua calls eth_type_trans() on unknown packets to prevent possible kernel panic on idpf. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: idpf: fix kernel panic on unknown packet types ice: fix enabling RX VLAN filtering ice: Fix freeing uninitialized pointers ==================== Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04net/sched: act_skbmod: prevent kernel-infoleakEric Dumazet
syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Local variable opt created at: tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 Bytes 188-191 of 248 are uninitialized Memory access of size 248 starts at ffff888117697680 Data copied to user address 00007ffe56d855f0 Fixes: 86da71b57383 ("net_sched: Introduce skbmod action") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04net: usb: ax88179_178a: avoid the interface always configured as random addressJose Ignacio Tornos Martinez
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset is not executed from bind operation and mac address is not read from the device registers or the devicetree at that moment. Since the check to configure if the assigned mac address is random or not for the interface, happens after the bind operation from usbnet_probe, the interface keeps configured as random address, although the address is correctly read and set during open operation (the only reset now). In order to keep only one reset for the device and to avoid the interface always configured as random address, after reset, configure correctly the suitable field from the driver, if the mac address is read successfully from the device registers or the devicetree. Take into account if a locally administered address (random) was previously stored. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04selftests/ftrace: Limit length in subsystem-enable testsYuanhe Shu
While sched* events being traced and sched* events continuously happen, "[xx] event tracing - enable/disable with subsystem level files" would not stop as on some slower systems it seems to take forever. Select the first 100 lines of output would be enough to judge whether there are more than 3 types of sched events. Fixes: 815b18ea66d6 ("ftracetest: Add basic event tracing test cases") Cc: stable@vger.kernel.org Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-04-04nvme-fc: rename free_ctrl callback to match name patternDaniel Wagner
Rename nvme_fc_nvme_ctrl_freed to nvme_fc_free_ctrl to match the name pattern for the callback. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-04-04nvmet-fc: move RCU read lock to nvmet_fc_assoc_existsDaniel Wagner
The RCU lock is only needed for the lookup loop and not for list_ad_tail_rcu call. Thus move it down the call chain into nvmet_fc_assoc_exists. While at it also fix the name typo of the function. Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-04-04nvmet: implement unique discovery NQNHannes Reinecke
Unique discovery NQNs allow to differentiate between discovery services from (typically physically separate) NVMe-oF subsystems. This is required for establishing secured connections as otherwise the credentials won't be unique and the integrity of the connection cannot be guaranteed. This patch adds a configfs attribute 'discovery_nqn' in the 'nvmet' configfs directory to specify the unique discovery NQN. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-04-04nvme: don't create a multipath node for zero capacity devicesChristoph Hellwig
Apparently there are nvme controllers around that report namespaces in the namespace list which have zero capacity. Return -ENXIO instead of -ENODEV from nvme_update_ns_info_block so we don't create a hidden multipath node for these namespaces but entirely ignore them. Fixes: 46e7422cda84 ("nvme: move common logic into nvme_update_ns_info") Reported-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-04-04x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()Borislav Petkov (AMD)
Modifying a MCA bank's MCA_CTL bits which control which error types to be reported is done over /sys/devices/system/machinecheck/ ├── machinecheck0 │   ├── bank0 │   ├── bank1 │   ├── bank10 │   ├── bank11 ... sysfs nodes by writing the new bit mask of events to enable. When the write is accepted, the kernel deletes all current timers and reinits all banks. Doing that in parallel can lead to initializing a timer which is already armed and in the timer wheel, i.e., in use already: ODEBUG: init active (active state 0) object: ffff888063a28000 object type: timer_list hint: mce_timer_fn+0x0/0x240 arch/x86/kernel/cpu/mce/core.c:2642 WARNING: CPU: 0 PID: 8120 at lib/debugobjects.c:514 debug_print_object+0x1a0/0x2a0 lib/debugobjects.c:514 Fix that by grabbing the sysfs mutex as the rest of the MCA sysfs code does. Reported by: Yue Sun <samsun1006219@gmail.com> Reported by: xingwei lee <xrivendell7@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/CAEkJfYNiENwQY8yV1LYJ9LjJs%2Bx_-PqMv98gKig55=2vbzffRw@mail.gmail.com
2024-04-04drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr()Boris Brezillon
Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called. Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Cc: <stable@vger.kernel.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240105184624.508603-18-dmitry.osipenko@collabora.com
2024-04-04usb: Disable USB3 LPM at shutdownKai-Heng Feng
SanDisks USB3 storage may disapper after system reboot: usb usb2-port3: link state change xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 usb usb2-port3: do warm reset, port only xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 usb usb2-port3: not warm reset yet, waiting 50ms xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0 usb usb2-port3: not warm reset yet, waiting 200ms ... xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0 usb usb2-port3: not warm reset yet, waiting 200ms xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0 usb usb2-port3: not enabled, trying warm reset again... This is due to the USB device still cause port change event after xHCI is shuted down: xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001 xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling. xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0 xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling. xhci_hcd 0000:38:00.0: // Halt the HC xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling. xhci_hcd 0000:00:14.0: // Halt the HC xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203 xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 usb 2-3: device not accepting address 2, error -108 xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1 usb usb2-port3: not reset yet, waiting 60ms ACPI: PM: Preparing to enter system sleep state S5 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1 usb usb2-port3: not reset yet, waiting 200ms reboot: Restarting system The port change event is caused by LPM transition, so disabling LPM at shutdown to make sure the device is in U0 for warmboot. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04gpio: cdev: check for NULL labels when sanitizing them for irqsBartosz Golaszewski
We need to take into account that a line's consumer label may be NULL and not try to kstrdup() it in that case but rather pass the NULL pointer up the stack to the interrupt request function. To that end: let make_irq_label() return NULL as a valid return value and use ERR_PTR() instead to signal an allocation failure to callers. Cc: stable@vger.kernel.org Fixes: b34490879baa ("gpio: cdev: sanitize the label before requesting the interrupt") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/lkml/20240402093534.212283-1-naresh.kamboju@linaro.org/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org>
2024-04-04usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport errorNorihiko Hama
When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled. After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled. As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL. And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object. Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory. [function unlink via configfs] usb0: eth_stop dev->port_usb=ffffff9b179c3200 --> error happens in usb_ep_enable(). NCM: ncm_disable: ncm=ffffff9b179c3200 --> no gether_disconnect() since ncm->port.in_ep->enabled is false. NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200 NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm [function link via configfs] NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000 NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000 NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0 usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit() --> dev->wrap() Unable to handle kernel paging request at virtual address dead00000000014f This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established. Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240327023550.51214-1-Norihiko.Hama@alpsalpine.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04usb: typec: tcpm: Correct the PDO counting in pd_setKyle Tso
Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets. Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240404133517.2707955-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04SUNRPC: Fix a slow server-side memory leak with RPC-over-TCPChuck Lever
Jan Schunk reports that his small NFS servers suffer from memory exhaustion after just a few days. A bisect shows that commit e18e157bb5c8 ("SUNRPC: Send RPC message on TCP with a single sock_sendmsg() call") is the first bad commit. That commit assumed that sock_sendmsg() releases all the pages in the underlying bio_vec array, but the reality is that it doesn't. svc_xprt_release() releases the rqst's response pages, but the record marker page fragment isn't one of those, so it is never released. This is a narrow fix that can be applied to stable kernels. A more extensive fix is in the works. Reported-by: Jan Schunk <scpcom@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218671 Fixes: e18e157bb5c8 ("SUNRPC: Send RPC message on TCP with a single sock_sendmsg() call") Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Jakub Kacinski <kuba@kernel.org> Cc: David Howells <dhowells@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-04-04drm/xe: Use ordered wq for preempt fence waitingMatthew Brost
Preempt fences can sleep waiting for an exec queue suspend operation to complete. If the system_unbound_wq is used for waiting and the number of waiters exceeds max_active this will result in other users of the system_unbound_wq getting starved. Use a device private work queue for preempt fences to avoid starvation of the system_unbound_wq. Even though suspend operations can complete out-of-order, all suspend operations within a VM need to complete before the preempt rebind worker can start. With that, use a device private ordered wq for preempt fence waiting. v2: - Add comment about cleanup on failure (Matt R) - Update commit message (Lucas) Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240401221913.139672-2-matthew.brost@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 37c15c4aae1fe3f67efd2641db8d8c25c2d524ab) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-04drm/xe: Move vma rebinding to the drm_exec locking loopThomas Hellström
Rebinding might allocate page-table bos, causing evictions. To support blocking locking during these evictions, perform the rebinding in the drm_exec locking loop. Also Reserve fence slots where actually needed rather than trying to predict how many fence slots will be needed over a complete wound-wait transaction. v2: - Remove a leftover call to xe_vm_rebind() (Matt Brost) - Add a helper function xe_vm_validate_rebind() (Matt Brost) v3: - Add comments and squash with previous patch (Matt Brost) Fixes: 24f947d58fe5 ("drm/xe: Use DRM GPUVM helpers for external- and evicted objects") Fixes: 29f424eb8702 ("drm/xe/exec: move fence reservation") Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-5-thomas.hellstrom@linux.intel.com (cherry picked from commit 7ee7dd6f301341d5b1204fc19fa620d7f7f7e90d) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-04drm/xe: Make TLB invalidation fences unorderedThomas Hellström
They can actually complete out-of-order, so allocate a unique fence context for each fence. Fixes: 5387e865d90e ("drm/xe: Add TLB invalidation fence after rebinds issued from execs") Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-4-thomas.hellstrom@linux.intel.com (cherry picked from commit 0453f1757501df2e82b66b3183a24bba5a6f8fa3) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-04drm/xe: Rework rebindingThomas Hellström
Instead of handling the vm's rebind fence separately, which is error prone if they are not strictly ordered, attach rebind fences as kernel fences to the vm's resv. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-3-thomas.hellstrom@linux.intel.com (cherry picked from commit 5a091aff50b780ae29c7faf70a7a6c21c98a54c4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-04drm/xe: Use ring ops TLB invalidation for rebindsThomas Hellström
For each rebind we insert a GuC TLB invalidation and add a corresponding unordered TLB invalidation fence. This might add a huge number of TLB invalidation fences to wait for so rather than doing that, defer the TLB invalidation to the next ring ops for each affected exec queue. Since the TLB is invalidated on exec_queue switch, we need to invalidate once for each affected exec_queue. v2: - Simplify if-statements around the tlb_flush_seqno. (Matthew Brost) - Add some comments and asserts. Fixes: 5387e865d90e ("drm/xe: Add TLB invalidation fence after rebinds issued from execs") Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-2-thomas.hellstrom@linux.intel.com (cherry picked from commit 4fc4899e86f7afbd09f4bcb899f0fc57e0296e62) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-04usb: gadget: functionfs: Wait for fences before enqueueing DMABUFPaul Cercueil
Instead of bailing when fences have already been installed on the DMABUF, wait for them (with a timeout) when doing a blocking operation. This fixes the issue where userspace would submit a DMABUF with fences already installed, with the (correct) expectation that it would just work. Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20240402110951.16376-3-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04usb: gadget: functionfs: Fix inverted DMA fence directionPaul Cercueil
A "read" fence was installed when the DMABUF was to be written to, and a "write" fence was installed when the DMABUF was to be read from. Besides, dma_resv_usage_rw() should only be used when waiting for fences. Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20240402110951.16376-2-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04usb: typec: ucsi: Fix connector check on initChristian A. Ehrhardt
Fix issues when initially checking for a connector change: - Use the correct connector number not the entire CCI. - Call ->read under the PPM lock. - Remove a bogus READ_ONCE. Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init") Cc: stable@kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04usb: phy: MAINTAINERS: mark Freescale USB PHY as orphanedKrzysztof Kozlowski
Emails to the only maintainer bounce: <ran.wang_1@nxp.com>: host nxp-com.mail.protection.outlook.com[52.101.68.39] said: 550 5.4.1 Recipient address rejected: Access denied. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240327175308.520317-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-05powerpc/crypto/chacha-p10: Fix failure on non Power10Michael Ellerman
The chacha-p10-crypto module provides optimised chacha routines for Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it provides chacha_crypt_arch() to generic code. Notably the module needs to provide chacha_crypt_arch() regardless of whether it is loaded on Power10 or an older CPU. The implementation of chacha_crypt_arch() already has a fallback to chacha_crypt_generic(), however the module as a whole fails to load on pre-Power10, because of the use of module_cpu_feature_match(). This breaks for example loading wireguard: jostaberry-1:~ # modprobe -v wireguard insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst modprobe: ERROR: could not insert 'wireguard': No such device Fix it by removing module_cpu_feature_match(), and instead check the CPU feature manually. If the CPU feature is not found, the module still loads successfully, but doesn't register the Power10 specific algorithms. That allows chacha_crypt_generic() to remain available for use, fixing the problem. [root@fedora ~]# modprobe -v wireguard insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko [ 18.910452][ T721] wireguard: allowedips self-tests: pass [ 18.914999][ T721] wireguard: nonce counter self-tests: pass [ 19.029066][ T721] wireguard: ratelimiter self-tests: pass [ 19.029257][ T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 19.029361][ T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. Reported-by: Michal Suchánek <msuchanek@suse.de> Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/ Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240328130200.3041687-1-mpe@ellerman.id.au
2024-04-04xhci: Fix root hub port null pointer dereference in xhci tracepointsMathias Nyman
The pointer from a xhci usb virt device to its root hub port (vdev->rhub_port) is set later when device is addressed, not while vdev is allocated. Tracepoints dereferenced this rhub_port pointer when freeing the virt device, which causes null pointer dereference if tracing is enabled and device is freed before addressed. This can happen if tracing is enabled and xhci driver is unloaded before a device is fully enumerated, or initial enumeration fails and device is reset and freed before retry. Don't dereference the rhub_port or show port numbers when tracing xhci_free_virt_device(). This info is not very useful anyway. Print the more useful slot id instead Fixes: 06790c19086f ("xhci: replace real & fake port with pointer to root hub port") Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Closes: https://lore.kernel.org/linux-usb/20240402005007.klv2ij727fkz7rpd@synopsys.com/ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240404121106.2842417-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04usb: xhci: correct return value in case of STS_HCEOliver Neukum
If we get STS_HCE we give up on the interrupt, but for the purpose of IRQ handling that still counts as ours. We may return IRQ_NONE only if we are positive that it wasn't ours. Hence correct the default. Fixes: 2a25e66d676d ("xhci: print warning when HCE was set") Cc: stable@vger.kernel.org # v6.2+ Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240404121106.2842417-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04ASoC: SOF: amd: fix for false dsp interruptsVijendar Mukunda
Before ACP firmware loading, DSP interrupts are not expected. Sometimes after reboot, it's observed that before ACP firmware is loaded false DSP interrupt is reported. Registering the interrupt handler before acp initialization causing false interrupts sometimes on reboot as ACP reset is not applied. Correct the sequence by invoking acp initialization sequence prior to registering interrupt handler. Fixes: 738a2b5e2cc9 ("ASoC: SOF: amd: Add IPC support for ACP IP block") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()Christophe JAILLET
The definition and declaration of sja1110_pcs_mdio_write_c45() don't have parameters in the same order. Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have: int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd, int reg, u16 val); it is likely that the definition is the one to change. Found with cppcheck, funcArgOrderDifferent. Fixes: ae271547bba6 ("net: dsa: sja1105: C45 only transactions for PCS") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04net: ravb: Always update error countersPaul Barker
The error statistics should be updated each time the poll function is called, even if the full RX work budget has been consumed. This prevents the counts from becoming stuck when RX bandwidth usage is high. This also ensures that error counters are not updated after we've re-enabled interrupts as that could result in a race condition. Also drop an unnecessary space. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240402145305.82148-2-paul.barker.ct@bp.renesas.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04net: ravb: Always process TX descriptor ringPaul Barker
The TX queue should be serviced each time the poll function is called, even if the full RX work budget has been consumed. This prevents starvation of the TX queue when RX bandwidth usage is high. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240402145305.82148-1-paul.barker.ct@bp.renesas.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04netfilter: nf_tables: discard table flag update with pending basechain deletionPablo Neira Ayuso
Hook unregistration is deferred to the commit phase, same occurs with hook updates triggered by the table dormant flag. When both commands are combined, this results in deleting a basechain while leaving its hook still registered in the core. Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()Ziyang Xuan
nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable(). And thhere is not any protection when iterate over nf_tables_flowtables list in __nft_flowtable_type_get(). Therefore, there is pertential data-race of nf_tables_flowtables list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller nft_flowtable_type_get() to protect the entire type query process. Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04netfilter: nf_tables: reject new basechain after table flag updatePablo Neira Ayuso
When dormant flag is toggled, hooks are disabled in the commit phase by iterating over current chains in table (existing and new). The following configuration allows for an inconsistent state: add table x add chain x y { type filter hook input priority 0; } add table x { flags dormant; } add chain x w { type filter hook input priority 1; } which triggers the following warning when trying to unregister chain w which is already unregistered. [ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260 [...] [ 127.322519] Call Trace: [ 127.322521] <TASK> [ 127.322524] ? __warn+0x9f/0x1a0 [ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322537] ? report_bug+0x1b1/0x1e0 [ 127.322545] ? handle_bug+0x3c/0x70 [ 127.322552] ? exc_invalid_op+0x17/0x40 [ 127.322556] ? asm_exc_invalid_op+0x1a/0x20 [ 127.322563] ? kasan_save_free_info+0x3b/0x60 [ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260 [ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260 [ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables] [ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables] [ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables] Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04netfilter: nf_tables: flush pending destroy work before exit_net releasePablo Neira Ayuso
Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivate(&ctx, set); (gdb) [ 1360.549372] Last potentially related work creation: [ 1360.549376] kasan_save_stack+0x20/0x40 [ 1360.549384] __kasan_record_aux_stack+0x9b/0xb0 [ 1360.549392] __queue_work+0x3fb/0x780 [ 1360.549399] queue_work_on+0x4f/0x60 [ 1360.549407] nft_rhash_remove+0x33b/0x340 [nf_tables] [ 1360.549516] nf_tables_commit+0x1c6a/0x2620 [nf_tables] [ 1360.549625] nfnetlink_rcv_batch+0x728/0xdc0 [nfnetlink] [ 1360.549647] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.549671] netlink_unicast+0x367/0x4f0 [ 1360.549680] netlink_sendmsg+0x34b/0x610 [ 1360.549690] ____sys_sendmsg+0x4d4/0x510 [ 1360.549697] ___sys_sendmsg+0xc9/0x120 [ 1360.549706] __sys_sendmsg+0xbe/0x140 [ 1360.549715] do_syscall_64+0x55/0x120 [ 1360.549725] entry_SYSCALL_64_after_hwframe+0x55/0x5d Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04netfilter: nf_tables: release mutex after nft_gc_seq_end from abort pathPablo Neira Ayuso
The commit mutex should not be released during the critical section between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC worker could collect expired objects and get the released commit lock within the same GC sequence. nf_tables_module_autoload() temporarily releases the mutex to load module dependencies, then it goes back to replay the transaction again. Move it at the end of the abort phase after nft_gc_seq_end() is called. Cc: stable@vger.kernel.org Fixes: 720344340fb9 ("netfilter: nf_tables: GC transaction race with abort path") Reported-by: Kuan-Ting Chen <hexrabbit@devco.re> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04netfilter: nf_tables: release batch on table validation from abort pathPablo Neira Ayuso
Unlike early commit path stage which triggers a call to abort, an explicit release of the batch is required on abort, otherwise mutex is released and commit_list remains in place. Add WARN_ON_ONCE to ensure commit_list is empty from the abort path before releasing the mutex. After this patch, commit_list is always assumed to be empty before grabbing the mutex, therefore 03c1f1ef1584 ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()") only needs to release the pending modules for registration. Cc: stable@vger.kernel.org Fixes: c0391b6ab810 ("netfilter: nf_tables: missing validation from the abort path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04Revert "tg3: Remove residual error handling in tg3_suspend"Paolo Abeni
This reverts commit 9ab4ad295622a3481818856762471c1f8c830e18. I went out of coffee and applied it to the wrong tree. Blame on me. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04x86/CPU/AMD: Track SNP host status with cc_platform_*()Borislav Petkov (AMD)
The host SNP worthiness can determined later, after alternatives have been patched, in snp_rmptable_init() depending on cmdline options like iommu=pt which is incompatible with SNP, for example. Which means that one cannot use X86_FEATURE_SEV_SNP and will need to have a special flag for that control. Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places. Move kdump_sev_callback() to its rightful place, while at it. Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support") Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de
2024-04-04x86/cc: Add cc_platform_set/_clear() helpersBorislav Petkov (AMD)
Add functionality to set and/or clear different attributes of the machine as a confidential computing platform. Add the first one too: whether the machine is running as a host for SEV-SNP guests. Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support") Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Link: https://lore.kernel.org/r/20240327154317.29909-5-bp@alien8.de
2024-04-04x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORMBorislav Petkov (AMD)
The functionality to load SEV-SNP guests by the host will soon rely on cc_platform* helpers because the cpu_feature* API with the early patching is insufficient when SNP support needs to be disabled late. Therefore, pull that functionality in. Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support") Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Link: https://lore.kernel.org/r/20240327154317.29909-4-bp@alien8.de
2024-04-04x86/coco: Require seeding RNG with RDRAND on CoCo systemsJason A. Donenfeld
There are few uses of CoCo that don't rely on working cryptography and hence a working RNG. Unfortunately, the CoCo threat model means that the VM host cannot be trusted and may actively work against guests to extract secrets or manipulate computation. Since a malicious host can modify or observe nearly all inputs to guests, the only remaining source of entropy for CoCo guests is RDRAND. If RDRAND is broken -- due to CPU hardware fault -- the RNG as a whole is meant to gracefully continue on gathering entropy from other sources, but since there aren't other sources on CoCo, this is catastrophic. This is mostly a concern at boot time when initially seeding the RNG, as after that the consequences of a broken RDRAND are much more theoretical. So, try at boot to seed the RNG using 256 bits of RDRAND output. If this fails, panic(). This will also trigger if the system is booted without RDRAND, as RDRAND is essential for a safe CoCo boot. Add this deliberately to be "just a CoCo x86 driver feature" and not part of the RNG itself. Many device drivers and platforms have some desire to contribute something to the RNG, and add_device_randomness() is specifically meant for this purpose. Any driver can call it with seed data of any quality, or even garbage quality, and it can only possibly make the quality of the RNG better or have no effect, but can never make it worse. Rather than trying to build something into the core of the RNG, consider the particular CoCo issue just a CoCo issue, and therefore separate it all out into driver (well, arch/platform) code. [ bp: Massage commit message. ] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240326160735.73531-1-Jason@zx2c4.com
2024-04-04tg3: Remove residual error handling in tg3_suspendNikita Kiryushin
As of now, tg3_power_down_prepare always ends with success, but the error handling code from former tg3_set_power_state call is still here. This code became unreachable in commit c866b7eac073 ("tg3: Do not use legacy PCI power management"). Remove (now unreachable) error handling code for simplification and change tg3_power_down_prepare to a void function as its result is no more checked. Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240401191418.361747-1-kiryushin@ancud.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04memblock tests: fix undefined reference to `BIT'Wei Yang
commit 772dd0342727 ("mm: enumerate all gfp flags") define gfp flags with the help of BIT, while gfp_types.h doesn't include header file for the definition. This through an error on building memblock tests. Let's include linux/bits.h to fix it. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> CC: Suren Baghdasaryan <surenb@google.com> CC: Michal Hocko <mhocko@suse.com> Link: https://lore.kernel.org/r/20240402132701.29744-4-richard.weiyang@gmail.com Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 12:59:55 +0000