summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-25rv: remove redundant initialization of pointer ptrColin Ian King
The pointer ptr is being initialized with a value that is never read, it is being updated later on a call to strim. Remove the extraneous initialization. Link: https://lkml.kernel.org/r/20230116161612.77192-1-colin.i.king@gmail.com Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-01-25ftrace: Maintain samples/ftraceMark Rutland
There's no entry in MAINTAINERS for samples/ftrace. Add one so that the FTRACE maintainers are kept in the loop. Link: https://lkml.kernel.org/r/20230103124912.2948963-2-mark.rutland@arm.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-01-25tracing/filter: fix kernel-doc warningsRandy Dunlap
Use the 'struct' keyword for a struct's kernel-doc notation and use the correct function parameter name to eliminate kernel-doc warnings: kernel/trace/trace_events_filter.c:136: warning: cannot understand function prototype: 'struct prog_entry ' kerne/trace/trace_events_filter.c:155: warning: Excess function parameter 'when_to_branch' description in 'update_preds' Also correct some trivial punctuation problems. Link: https://lkml.kernel.org/r/20230108021238.16398-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-01-25riscv: Move call to init_cpu_topology() to later initialization stageLey Foon Tan
If "capacity-dmips-mhz" is present in a CPU DT node, topology_parse_cpu_capacity() will fail to allocate memory. arm64, with which this code path is shared, does not call topology_parse_cpu_capacity() until later in boot where memory allocation is available. While "capacity-dmips-mhz" is not yet a valid property on RISC-V, invalid properties should be ignored rather than cause issues. Move init_cpu_topology(), which calls topology_parse_cpu_capacity(), to a later initialization stage, to match arm64. As a side effect of this change, RISC-V is "protected" from changes to core topology code that would work on arm64 where memory allocation is safe but on RISC-V isn't. Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com> Link: https://lore.kernel.org/r/20230105033705.3946130-1-leyfoon.tan@starfivetech.com [Palmer: use Conor's commit text] Link: https://lore.kernel.org/linux-riscv/20230104183033.755668-1-pierre.gondois@arm.com/T/#me592d4c8b9508642954839f0077288a353b0b9b2 Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-01-25usb: gadget: f_uac2: Fix incorrect increment of bNumEndpointsPratham Pratap
Currently connect/disconnect of USB cable calls afunc_bind and eventually increments the bNumEndpoints. Performing multiple plugin/plugout will increment bNumEndpoints incorrectly, and on the next plug-in it leads to invalid configuration of descriptor and hence enumeration fails. Fix this by resetting the value of bNumEndpoints to 1 on every afunc_bind call. Fixes: 40c73b30546e ("usb: gadget: f_uac2: add adaptive sync support for capture") Cc: stable <stable@kernel.org> Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com> Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/1674631645-28888-1-git-send-email-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25HID: Ignore battery for Elan touchscreen on Asus TP420IAmarco.rodolfi@tuta.io
This device has a touchscreen thats report a battery even if it doesn't have one. Ask Linux to ignore the battery so it will not always report it as low. [jkosina@suse.cz: fix whitespace damage] Signed-off-by: Marco Rodolfi <marco.rodolfi@tuta.io> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-25thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()Rafael J. Wysocki
In order to prevent int340x_thermal_get_trip_type() from possibly racing with int340x_thermal_read_trips() invoked by int3403_notify() add locking to it in analogy with int340x_thermal_get_trip_temp(). Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-25Merge branch 'mptcp-fixes'David S. Miller
Jeremy Kerr says: ==================== net: mctp: struct sock lifetime fixes This series is a set of fixes for the sock lifetime handling in the AF_MCTP code, fixing a uaf reported by Noam Rathaus <noamr@ssd-disclosure.com>. The Fixes: tags indicate the original patches affected, but some tweaking to backport to those commits may be needed; I have a separate branch with backports to 5.15 if that helps with stable trees. Of course, any comments/queries most welcome. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: mark socks as dead on unhash, prevent re-addJeremy Kerr
Once a socket has been unhashed, we want to prevent it from being re-used in a sk_key entry as part of a routing operation. This change marks the sk as SOCK_DEAD on unhash, which prevents addition into the net's key list. We need to do this during the key add path, rather than key lookup, as we release the net keys_lock between those operations. Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: hold key reference when looking up a general keyPaolo Abeni
Currently, we have a race where we look up a sock through a "general" (ie, not directly associated with the (src,dest,tag) tuple) key, then drop the key reference while still holding the key's sock. This change expands the key reference until we've finished using the sock, and hence the sock reference too. Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>. Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: move expiry timer delete to unhashJeremy Kerr
Currently, we delete the key expiry timer (in sk->close) before unhashing the sk. This means that another thread may find the sk through its presence on the key list, and re-queue the timer. This change moves the timer deletion to the unhash, after we have made the key no longer observable, so the timer cannot be re-queued. Fixes: 7b14e15ae6f4 ("mctp: Implement a timeout for tags") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: add an explicit reference from a mctp_sk_key to sockJeremy Kerr
Currently, we correlate the mctp_sk_key lifetime to the sock lifetime through the sock hash/unhash operations, but this is pretty tenuous, and there are cases where we may have a temporary reference to an unhashed sk. This change makes the reference more explicit, by adding a hold on the sock when it's associated with a mctp_sk_key, released on final key unref. Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25Merge branch 'ravb-fixes'David S. Miller
Yoshihiro Shimoda says: ==================== net: ravb: Fix potential issues Fix potentiall issues on the ravb driver. Changes from v2: https://lore.kernel.org/all/20230123131331.1425648-1-yoshihiro.shimoda.uh@renesas.com/ - Add Reviewed-by in the patch [2/2]. - Add a commit description in the patch [2/2]. Changes from v1: https://lore.kernel.org/all/20230119043920.875280-1-yoshihiro.shimoda.uh@renesas.com/ - Fix typo in the patch [1/2]. - Add Reviewed-by in the patch [1/2]. - Fix "Fixed" tag in the patch [2/2]. - Fix a comment indentation of the code in the patch [2/2]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ravb: Fix possible hang if RIS2_QFF1 happenYoshihiro Shimoda
Since this driver enables the interrupt by RIC2_QFE1, this driver should clear the interrupt flag if it happens. Otherwise, the interrupt causes to hang the system. Note that this also fix a minor coding style (a comment indentation) around the fixed code. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ravb: Fix lack of register setting after system resumed for Gen3Yoshihiro Shimoda
After system entered Suspend to RAM, registers setting of this hardware is reset because the SoC will be turned off. On R-Car Gen3 (info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So, after system resumed, it lacks of the initial settings for ptp. So, add ravb_ptp_{init,stop}() into ravb_{resume,suspend}(). Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25gpio: ep93xx: Make irqchip immutableNikita Shubin
This turns the Cirrus ep93xx gpio irqchip immutable. Preserve per-chip labels by adding an ->irq_print_chip() callback. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-25gpio: ep93xx: Fix port F hwirq numbers in handlerNikita Shubin
Fix wrong translation of irq numbers in port F handler, as ep93xx hwirqs increased by 1, we should simply decrease them by 1 in translation. Fixes: 482c27273f52 ("ARM: ep93xx: renumber interrupts") Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-25ASoC: codecs: wsa883x: correct playback min/max ratesKrzysztof Kozlowski
Correct reversed values used in min/max rates, leading to incorrect playback constraints. Cc: <stable@vger.kernel.org> Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124123049.285395-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-25gpio: mxc: Unlock on error path in mxc_flip_edge()Dan Carpenter
We recently added locking to this function but one error path was over looked. Drop the lock before returning. Fixes: e5464277625c ("gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-25platform/x86: thinkpad_acpi: Fix profile modes on Intel platformsMark Pearson
My last commit to fix profile mode displays on AMD platforms caused an issue on Intel platforms - sorry! In it I was reading the current functional mode (MMC, PSC, AMT) from the BIOS but didn't account for the fact that on some of our Intel platforms I use a different API which returns just the profile and not the functional mode. This commit fixes it so that on Intel platforms it knows the functional mode is always MMC. I also fixed a potential problem that a platform may try to set the mode for both MMC and PSC - which was incorrect. Tested on X1 Carbon 9 (Intel) and Z13 (AMD). Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963 Fixes: fde5f74ccfc7 ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-25iommu/exynos: Implement fault handling on SysMMU v7Sam Protsenko
SysMMU v7 has a bit different registers for getting the fault info: - there is one single register (MMU_FAULT_VA) to get the fault address - fault access type (R/W) can be read from MMU_FAULT_TRANS_INFO register now - interrupt status register has different bits w.r.t. previous SysMMU versions - VM and non-VM layouts have different register addresses Add correct fault handling implementation for SysMMU v7, according to all mentioned differences. Only VID #0 (default) is handled, as VM domains support is not implemented yet. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20220726200739.30017-3-semen.protsenko@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/exynos: Abstract getting the fault infoSam Protsenko
Fault info obtaining is implemented for SysMMU v1..v5 in a very hardware specific way, as it relies on: - interrupt bits being tied to read or write access - having separate registers for the fault address w.r.t. AR/AW ops Newer SysMMU versions (like SysMMU v7) have different way of providing the fault info via registers: - the transaction type (read or write) should be read from the register (instead of hard-coding it w.r.t. corresponding interrupt status bit) - there is only one single register for storing the fault address Because of that, it is not possible to add newer SysMMU support into existing paradigm. Also it's not very effective performance-wise: - checking SysMMU version in ISR each time is not necessary - performing linear search to find the fault info by interrupt bit can be replaced with a single lookup operation Pave the way for adding support for new SysMMU versions by abstracting the getting of fault info in ISR. While at it, do some related style cleanups as well. This is mostly a refactoring patch, but there are some minor functional changes: - fault message format is a bit different; now instead of AR/AW prefixes for the fault's name, the request direction is printed as [READ]/[WRITE]. It has to be done to prepare an abstraction for SysMMU v7 support - don't panic on unknown interrupts; print corresponding message and continue - if fault wasn't recovered, panic with some sane message instead of just doing BUG_ON() The whole fault message looks like this now: [READ] PAGE FAULT occurred at 0x12341000 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220726200739.30017-2-semen.protsenko@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25dt-bindings: iommu: renesas,ipmmu-vmsa: add r8a779g0 supportYoshihiro Shimoda
Document the compatible values for the IPMMU-VMSA blocks in the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230119131833.1008752-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25Merge branch 'iommu-memory-accounting' into coreJoerg Roedel
Merge patch-set from Jason: "Let iommufd charge IOPTE allocations to the memory cgroup" Description: IOMMUFD follows the same design as KVM and uses memory cgroups to limit the amount of kernel memory a iommufd file descriptor can pin down. The various internal data structures already use GFP_KERNEL_ACCOUNT to charge its own memory. However, one of the biggest consumers of kernel memory is the IOPTEs stored under the iommu_domain and these allocations are not tracked. This series is the first step in fixing it. The iommu driver contract already includes a 'gfp' argument to the map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then having the driver allocate the IOPTE tables with that flag will capture a significant amount of the allocations. Update the iommu_map() API to pass in the GFP argument, and fix all call sites. Replace iommu_map_atomic(). Audit the "enterprise" iommu drivers to make sure they do the right thing. Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are already correct. A follow up series will be needed to capture the allocations made when the iommu_domain itself is allocated, which will complete the job. Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com/
2023-01-25iommu/s390: Use GFP_KERNEL in sleepable contextsJason Gunthorpe
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC was added mechanically in the prior patches. Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/10-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'sJason Gunthorpe
dma_alloc_cpu_table() and dma_alloc_page_table() are eventually called by iommufd through s390_iommu_map_pages() and it should not be forced to atomic. Thread the gfp parameter through the call chain starting from s390_iommu_map_pages(). Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/9-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/intel: Use GFP_KERNEL in sleepable contextsJason Gunthorpe
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC was added mechanically in the prior patches. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/8-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/intel: Support the gfp argument to the map_pages opJason Gunthorpe
Flow it down to alloc_pgtable_page() via pfn_to_dma_pte() and __domain_mapping(). Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/7-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/intel: Add a gfp parameter to alloc_pgtable_page()Jason Gunthorpe
This is eventually called by iommufd through intel_iommu_map_pages() and it should not be forced to atomic. Push the GFP_ATOMIC to all callers. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/6-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()Jason Gunthorpe
iommufd follows the same design as KVM and uses memory cgroups to limit the amount of kernel memory a iommufd file descriptor can pin down. The various internal data structures already use GFP_KERNEL_ACCOUNT. However, one of the biggest consumers of kernel memory is the IOPTEs stored under the iommu_domain. Many drivers will allocate these at iommu_map() time and will trivially do the right thing if we pass in GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/5-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()Jason Gunthorpe
This function does an allocation of a buffer to return to the caller and then goes on to allocate some internal memory, eg the scatterlist and IOPTEs. Instead of hard wiring GFP_KERNEL and a wrong GFP_ATOMIC, continue to use the passed in gfp flags for all of the allocations. Clear the zone and policy bits that are only relevant for the buffer allocation before re-using them for internal allocations. Auditing says this is never called from an atomic context, so the GFP_ATOMIC is the incorrect flag. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/4-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: Add a gfp parameter to iommu_map_sg()Jason Gunthorpe
Follow the pattern for iommu_map() and remove iommu_map_sg_atomic(). This allows __iommu_dma_alloc_noncontiguous() to use a GFP_KERNEL allocation here, based on the provided gfp flags. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/3-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: Remove iommu_map_atomic()Jason Gunthorpe
There is only one call site and it can now just pass the GFP_ATOMIC to the normal iommu_map(). Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/2-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: Add a gfp parameter to iommu_map()Jason Gunthorpe
The internal mechanisms support this, but instead of exposting the gfp to the caller it wrappers it into iommu_map() and iommu_map_atomic() Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: dma: Use of_iommu_get_resv_regions()Thierry Reding
For device tree nodes, use the standard of_iommu_get_resv_regions() implementation to obtain the reserved memory regions associated with a device. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230120174251.4004100-5-thierry.reding@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: Implement of_iommu_get_resv_regions()Thierry Reding
This is an implementation that IOMMU drivers can use to obtain reserved memory regions from a device tree node. It uses the reserved-memory DT bindings to find the regions associated with a given device. If these regions are marked accordingly, identity mappings will be created for them in the IOMMU domain that the devices will be attached to. Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230120174251.4004100-4-thierry.reding@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25dt-bindings: reserved-memory: Document iommu-addressesThierry Reding
This adds the "iommu-addresses" property to reserved-memory nodes, which allow describing the interaction of memory regions with IOMMUs. Two use- cases are supported: 1. Static mappings can be described by pairing the "iommu-addresses" property with a "reg" property. This is mostly useful for adopting firmware-allocated buffers via identity mappings. One common use- case where this is required is if early firmware or bootloaders have set up a bootsplash framebuffer that a display controller is actively scanning out from during the operating system boot process. 2. If an "iommu-addresses" property exists without a "reg" property, the reserved-memory node describes an IOVA reservation. Such memory regions are excluded from the IOVA space available to operating system drivers and can be used for regions that must not be used to map arbitrary buffers. Each mapping or reservation is tied to a specific device via a phandle to the device's device tree node. This allows a reserved-memory region to be reused across multiple devices. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230120174251.4004100-3-thierry.reding@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25of: Introduce of_translate_dma_region()Thierry Reding
This function is similar to of_translate_dma_address() but also reads a length in addition to an address from a device tree property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230120174251.4004100-2-thierry.reding@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25Merge tag 'arm-smmu-updates' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu Arm SMMU updates for 6.3 - Device-tree binding updates: * Cater for three power domains on SM6375 * Document existing compatible strings for Qualcomm SoCs * Tighten up clocks description for platform-specific compatible strings - Enable Qualcomm workarounds for some additional platforms that need them
2023-01-25net/x25: Fix to not accept on connected socketHyunwoo Kim
When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it. This creates a child socket with the sk of the parent x25 socket, which can cause confusion. Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25nvme: fix passthrough csi checkKeith Busch
The namespace head saves the Command Set Indicator enum, so use that instead of the Command Set Selected. The two values are not the same. Fixes: 831ed60c2aca2d ("nvme: also return I/O command effects from nvme_command_effects") Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-01-24riscv/kprobe: Fix instruction simulation of JALRLiao Chang
Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following crash: [ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170 [ 32.093115] Oops [#1] [ 32.093251] Modules linked in: [ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16 [ 32.093985] Hardware name: riscv-virtio,qemu (DT) [ 32.094280] epc : ksys_read+0x88/0xd6 [ 32.094855] ra : ksys_read+0xc0/0xd6 [ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0 [ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80 [ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60 [ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708 [ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300 [ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff [ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170 [ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030 [ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410 [ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c [ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54 [ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d [ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6 [ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38 [ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2 Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)', hence it requires obtaining the target address from rs1 followed by updating rd. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Signed-off-by: Liao Chang <liaochang1@huawei.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230116064342.2092136-1-liaochang1@huawei.com [Palmer: Pick Guo's cleanup] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-01-24Merge branch 'bpf, sockmap: Fix infinite recursion in sock_map_close'Alexei Starovoitov
Jakub Sitnicki says: ==================== This patch set addresses the syzbot report in [1]. Patch #1 has been suggested by Eric [2]. I extended it to cover the rest of sock_map proto callbacks. Otherwise we would still overflow the stack. Patch #2 contains the actual fix and bug analysis. Patches #3 & #4 add coverage to selftests to trigger the bug. [1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ [2] https://lore.kernel.org/all/CANn89iK2UN1FmdUcH12fv_xiZkv2G+Nskvmq7fG6aA_6VKRf6g@mail.gmail.com/ --- v1 -> v2: v1: https://lore.kernel.org/r/20230113-sockmap-fix-v1-0-d3cad092ee10@cloudflare.com [v1 didn't hit bpf@ ML by mistake] * pull in Eric's patch to protect against recursion loop bugs (Eric) * add a macro helper to check if pointer is inside a memory range (Eric) ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-24selftests/bpf: Cover listener cloning with progs attached to sockmapJakub Sitnicki
Today we test if a child socket is cloned properly from a listening socket inside a sockmap only when there are no BPF programs attached to the map. A bug has been reported [1] for the case when sockmap has a verdict program attached. So cover this case as well to prevent regressions. [1]: https://lore.kernel.org/r/00000000000073b14905ef2e7401@google.com Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-4-1e0ee7ac2f90@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-24selftests/bpf: Pass BPF skeleton to sockmap_listen ops testsJakub Sitnicki
Following patch extends the sockmap ops tests to cover the scenario when a sockmap with attached programs holds listening sockets. Pass the BPF skeleton to sockmap ops test so that the can access and attach the BPF programs. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-3-1e0ee7ac2f90@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-24bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listenerJakub Sitnicki
A listening socket linked to a sockmap has its sk_prot overridden. It points to one of the struct proto variants in tcp_bpf_prots. The variant depends on the socket's family and which sockmap programs are attached. A child socket cloned from a TCP listener initially inherits their sk_prot. But before cloning is finished, we restore the child's proto to the listener's original non-tcp_bpf_prots one. This happens in tcp_create_openreq_child -> tcp_bpf_clone. Today, in tcp_bpf_clone we detect if the child's proto should be restored by checking only for the TCP_BPF_BASE proto variant. This is not correct. The sk_prot of listening socket linked to a sockmap can point to to any variant in tcp_bpf_prots. If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then the child socket unintentionally is left if the inherited sk_prot by tcp_bpf_clone. This leads to issues like infinite recursion on close [1], because the child state is otherwise not set up for use with tcp_bpf_prot operations. Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants. Note that it wouldn't be sufficient to check the socket state when overriding the sk_prot in tcp_bpf_update_proto in order to always use the TCP_BPF_BASE variant for listening sockets. Since commit b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage") it is possible for a socket to transition to TCP_LISTEN state while already linked to a sockmap, e.g. connect() -> insert into map -> connect(AF_UNSPEC) -> listen(). [1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ Fixes: e80251555f0b ("tcp_bpf: Don't let child socket inherit parent protocol ops on copy") Reported-by: syzbot+04c21ed96d861dccc5cd@syzkaller.appspotmail.com Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-2-1e0ee7ac2f90@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-24bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itselfJakub Sitnicki
sock_map proto callbacks should never call themselves by design. Protect against bugs like [1] and break out of the recursive loop to avoid a stack overflow in favor of a resource leak. [1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-1-1e0ee7ac2f90@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according to RFC 9260, Sect 8.5.1. 2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk(). And remove useless check in this macro too. 3) Revert DATA_SENT state in the SCTP tracker, this was applied in the previous merge window. Next patch in this series provides a more simple approach to multihoming support. 4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming support, use default ESTABLISHED of 210 seconds based on heartbeat timeout * maximum number of retransmission + round-trip timeout. Otherwise, SCTP conntrack entry that represents secondary paths remain stale in the table for up to 5 days. This is a slightly large batch with fixes for the SCTP connection tracking helper, all patches from Sriram Yagnaraman. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: conntrack: unify established states for SCTP paths Revert "netfilter: conntrack: add sctp DATA_SENT state" netfilter: conntrack: fix bug in for_each_sctp_chunk netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE ==================== Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24ice: move devlink port creation/deletionPaul M Stillwell Jr
Commit a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") moved the code to create and destroy the devlink PF port. This was fine, but created a corner case issue in the case of ice_register_netdev() failing. In that case, the driver would end up calling ice_devlink_destroy_pf_port() twice. Additionally, it makes no sense to tie creation of the devlink PF port to the creation of the netdev so separate out the code to create/destroy the devlink PF port from the netdev code. This makes it a cleaner interface. Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24sctp: fail if no bound addresses can be used for a given scopeMarcelo Ricardo Leitner
Currently, if you bind the socket to something like: servaddr.sin6_family = AF_INET6; servaddr.sin6_port = htons(0); servaddr.sin6_scope_id = 0; inet_pton(AF_INET6, "::1", &servaddr.sin6_addr); And then request a connect to: connaddr.sin6_family = AF_INET6; connaddr.sin6_port = htons(20000); connaddr.sin6_scope_id = if_nametoindex("lo"); inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr); What the stack does is: - bind the socket - create a new asoc - to handle the connect - copy the addresses that can be used for the given scope - try to connect But the copy returns 0 addresses, and the effect is that it ends up trying to connect as if the socket wasn't bound, which is not the desired behavior. This unexpected behavior also allows KASLR leaks through SCTP diag interface. The fix here then is, if when trying to copy the addresses that can be used for the scope used in connect() it returns 0 addresses, bail out. This is what TCP does with a similar reproducer. Reported-by: Pietro Borrello <borrello@diag.uniroma1.it> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-02 23:37:19 +0000