summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-25ASoC: topology: Consolidate how dtexts and dvalues are freedAmadeusz Sławiński
Provide helper functions and use them to free dtexts and dvalues in topology. This is followup cleanup after related changes in this area as suggested in: https://mailman.alsa-project.org/pipermail/alsa-devel/2019-January/144761.html Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: hdac_hdmi: Set ops to NULL on removeAmadeusz Sławiński
When we unload Skylake driver we may end up calling hdac_component_master_unbind(), it uses acomp->audio_ops, which we set in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(), otherwise we will dereference no longer existing pointer. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk devAmadeusz Sławiński
When driver is probed, we iterate over NHLT and check if clk entries are present. For each such entry we call register_skl_clk and keep the result in data->clk[]. Currently data->clk is sparsely indexed using NHLT table iterator, while when freeing we use number of registered entries. Let's just use data->avail_clk_cnt as index, so it can be reset back in unregister_src_clk. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Properly cleanup on component removalAmadeusz Sławiński
When we remove component we need to reverse things which were done on init, this consists of topology cleanup, lists cleanup and releasing firmware. Currently cleanup handlers are put in wrong places or otherwise missing. So add proper component cleanup function and perform cleanups in it. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Add function to cleanup debugfs interfaceAmadeusz Sławiński
Currently debugfs has no cleanup function. Add skl_debufs_exit function so we can clean after ourselves properly. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Don't return failure on machine driver reloadAmadeusz Sławiński
When we unload and reload machine driver, we shouldn't return that we failed to initialize. This allows to reload machine driver, without having to unload whole stack. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: compress: Fix memory leak from snd_soc_new_compressAmadeusz Sławiński
Change kzalloc to devm_kzalloc, so compr gets automatically freed when it's no longer needed. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ALSA: hdac: Fix codec name after machine driver is unloaded and reloadedAmadeusz Sławiński
Currently on each driver reload internal counter is being increased. It causes failure to enumerate driver devices, as they have hardcoded: .codec_name = "ehdaudio0D2", As there is currently no devices with multiple hda codecs and there is currently no established way to reliably differentiate, between them, always assign bus->idx = 0; This fixes a problem when we unload and reload machine driver idx gets incremented, so .codec_name would've needed to be set to "ehdaudio1D2" after first reload and so on. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Initialize lists before access so they are safe to useAmadeusz Sławiński
If skl_probe_work() was not run driver ends up dereferencing NULL pointer when operating on lists in skl_platform_unregister(). To fix this initialize lists in skl_create(). Also run cancel_work_sync() before all cleanup functions, so we don't end up unnecessarily running probe work. Easily reproducible with: while true; do modprobe snd_soc_skl; rmmod snd_soc_skl; done (with the assumption that relevant drivers are added to blacklist on system boot) Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Use recommended SDxFMT programming sequencePaweł Harłoziński
For BXT platforms, the recommended sequence to program the SDxFMT is to first couple the stream, write the format and decouple again. For all other platforms said sequence remains unchanged. To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is relocated to hda_codec.h file so it can be accessed by SKL driver. Signed-off-by: Paweł Harłoziński <pawel.harlozinski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25gpio: Fix return value mismatch of function gpiod_get_from_of_node()Waibel Georg
In case the requested gpio property is not found in the device tree, some callers of gpiod_get_from_of_node() expect a return value of NULL, others expect -ENOENT. In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT. Currently it gets a NULL, which breaks the loop that tries all gpio_suffixes. The result is that a gpio property is not found, even though it is there. This patch changes gpiod_get_from_of_node() to return -ENOENT instead of NULL when the requested gpio property is not found in the device tree. Additionally it modifies all calling functions to properly evaluate the return value. Another approach would be to leave the return value of gpiod_get_from_of_node() as is and fix the bug in devm_fwnode_get_index_gpiod_from_child(). Other callers would still need to be reworked. The effort would be the same as with the chosen solution. Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25pinctrl: ocelot: fix pinmuxing for pins after 31Alexandre Belloni
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pinctrl: ocelot: fix gpio direction for pins after 31Alexandre Belloni
The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25arm64: Expose FRINT capabilities to userspaceMark Brown
ARMv8.5 introduces the FRINT series of instructions for rounding floating point numbers to integers. Provide a capability to userspace in order to allow applications to determine if the system supports these instructions. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-25arm64: Expose ARMv8.5 CondM capability to userspaceMark Brown
ARMv8.5 adds new instructions XAFLAG and AXFLAG to translate the representation of the results of floating point comparisons between the native ARM format and an alternative format used by some software. Add a hwcap allowing userspace to determine if they are present, since we referred to earlier CondM extensions as FLAGM call these extensions FLAGM2. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-25pwm: jz4740: Apply configuration atomicallyPaul Cercueil
This is cleaner, more future-proof, and incidentally it also fixes the PWM resetting its config when stopped/started several times. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Remove unused devicetree compatible stringsPaul Cercueil
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: jz47xx: Remove unused compatible stringsPaul Cercueil
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Fix the G12A AO clock parents orderNeil Armstrong
The Amlogic G12A and G12B Documentation is wrong, the AO xtal and clk81 clock source order is reversed, and validated when adding DVFS support by using the PWM AO D output to control the CPU supply voltage. The vendor tree also uses the reversed xtal and clk81 order at [1]. [1] https://github.com/hardkernel/linux/blob/odroidn2-4.9.y/drivers/amlogic/pwm/pwm_meson.c#L462 Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Update with SPDX Licence identifierNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32: Use 3 cells ->of_xlate()Fabrice Gasnier
STM32 Timers support generic 3 cells PWM to encode PWM number, period and polarity. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: stm32: Add #pwm-cellsFabrice Gasnier
STM32 Timers support generic 3 cells PWM bindings to encode PWM number, period and polarity as defined in pwm.txt. Fixes: cd9a99c2f8e8 ("dt-bindings: pwm: Add STM32 bindings") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: Add consumer device linkFabrice Gasnier
Add a device link between the PWM consumer and the PWM provider. This enforces the PWM user to get suspended before the PWM provider. It allows proper synchronization of suspend/resume sequences: the PWM user is responsible for properly stopping PWM, before the provider gets suspended: see [1]. Add the device link in: - of_pwm_get() - pwm_get() - devm_*pwm_get() variants as it requires a reference to the device for the PWM consumer. [1] https://lkml.org/lkml/2019/2/5/770 Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32-lp: Add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence. Only perform a check here, and handle the pinctrl states. See [1]. [1] https://lkml.org/lkml/2019/2/5/770 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: stm32-lp: Document pin control sleep stateFabrice Gasnier
Add documentation for pin control sleep state on STM32 LPTimer PWM. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add a driver for SiFive SoC PWMYash Shah
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add DT documentation for SiFive PWM ControllerYash Shah
DT documentation for PWM controller added. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Compatible string update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25iommu/io-pgtable: Support non-coherent page tablesBjorn Andersson
Describe the memory related to page table walks as non-cacheable for iommu instances that are not DMA coherent. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [will: Use cfg->coherent_walk, fix arm-v7s, ensure outer-shareable for NC] Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call orderPhil Reid
Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25ALSA: hda/realtek: Add quirks for several Clevo notebook barebonesRichard Sailer
This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM Clevo. The model names are written in regex syntax to describe/match all clevo models that are similar enough and use the same PCI SSID that this fixup works for them. Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model and fixes the audio. Fixes: 80690a276f44 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Richard Sailer <rs@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-25iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flagWill Deacon
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just an indication of whether or not the page-table walker for the IOMMU is coherent with the CPU caches. Since cache coherency is more than just a quirk, replace the flag with its own field in the io_pgtable_cfg structure. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25Merge tag 'imx-fixes-5.2-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.2, round 3: - A recent testing by Sébastien discovers that the PWM interrupts of i.MX6UL were wrongly coded in device tree. It's a fix for it. * tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6ul: fix PWM[1-4] interrupts Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes ARM: dts: Amlogic fixes for v5.2-rc - fix GPU interrupts and operating voltage * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: fix the operating voltage of the Mali GPU ARM: dts: meson8b: drop undocumented property from the Mali GPU node ARM: dts: meson8: fix GPU interrupts and drop an undocumented property Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25regulator: core: Expose some of core functions needed by couplersDmitry Osipenko
Expose some of internal functions that are required for implementation of customized regulator couplers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25regulator: core: Introduce API for regulators coupling customizationDmitry Osipenko
Right now regulator core supports only one type of regulators coupling, the "voltage max-spread" which keeps voltages of coupled regulators in a given range from each other. A more sophisticated coupling may be required in practice, one example is the NVIDIA Tegra SoCs which besides the max-spreading have other restrictions that must be adhered. Introduce API that allow platforms to provide their own customized coupling algorithms. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: rt5677: depop stereo dacCurtis Malainey
Upon enabling the ASRC DAC we need a delay to avoid popping the speakers. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Cc: Ross Zwisler <zwisler@chromium.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25powerpc/64s/exception: Fix machine check early corrupting AMRNicholas Piggin
The early machine check runs in real mode, so locking is unnecessary. Worse, the windup does not restore AMR, so this can result in a false KUAP fault after a recoverable machine check hits inside a user copy operation. Fix this similarly to HMI by just avoiding the kuap lock in the early machine check handler (it will be set by the late handler that runs in virtual mode if that runs). If the virtual mode handler is reached, it will lock and restore the AMR. Fixes: 890274c2dc4c0 ("powerpc/64s: Implement KUAP for Radix MMU") Cc: Russell Currey <ruscur@russell.cc> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-25arm64: defconfig: enable CONFIG_RANDOMIZE_BASENick Desaulniers
For testing coverage and improved defense in depth, enable KASLR by default. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-25arm64: ARM64_MODULES_PLTS must depend on MODULESCatalin Marinas
Otherwise, selecting it without MODULES leads to build failures. Fixes: 58557e486f89 ("arm64: Allow user selection of ARM64_MODULE_PLTS") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-25x86/alternatives: Add int3_emulate_call() selftestPeter Zijlstra
Given that the entry_*.S changes for this functionality are somewhat tricky, make sure the paths are tested every boot, instead of on the rare occasion when we trip an INT3 while rewriting text. Requested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/stackframe/32: Allow int3_emulate_push()Peter Zijlstra
Now that x86_32 has an unconditional gap on the kernel stack frame, the int3_emulate_push() thing will work without further changes. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/stackframe/32: Provide consistent pt_regsPeter Zijlstra
Currently pt_regs on x86_32 has an oddity in that kernel regs (!user_mode(regs)) are short two entries (esp/ss). This means that any code trying to use them (typically: regs->sp) needs to jump through some unfortunate hoops. Change the entry code to fix this up and create a full pt_regs frame. This then simplifies various trampolines in ftrace and kprobes, the stack unwinder, ptrace, kdump and kgdb. Much thanks to Josh for help with the cleanups! Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/stackframe, x86/ftrace: Add pt_regs frame annotationsPeter Zijlstra
When CONFIG_FRAME_POINTER, we should mark pt_regs frames. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/stackframe, x86/kprobes: Fix frame pointer annotationsPeter Zijlstra
The kprobe trampolines have a FRAME_POINTER annotation that makes no sense. It marks the frame in the middle of pt_regs, at the place of saving BP. Change it to mark the pt_regs frame as per the ENCODE_FRAME_POINTER from the respective entry_*.S. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/stackframe: Move ENCODE_FRAME_POINTER to asm/frame.hPeter Zijlstra
In preparation for wider use, move the ENCODE_FRAME_POINTER macros to a common header and provide inline asm versions. These macros are used to encode a pt_regs frame for the unwinder; see unwind_frame.c:decode_frame_pointer(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25x86/entry/32: Clean up return from interrupt preemption pathPeter Zijlstra
The code flow around the return from interrupt preemption point seems needlessly complicated. There is only one site jumping to resume_kernel, and none (outside of resume_kernel) jumping to restore_all_kernel. Inline resume_kernel in restore_all_kernel and avoid the CONFIG_PREEMPT dependent label. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25Merge tag 'v5.2-rc6' into x86/asm, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25locking/lockdep: increase size of counters for lockdep statisticsKobe Wu
When system has been running for a long time, signed integer counters are not enough for some lockdep statistics. Using unsigned long counters can satisfy the requirement. Besides, most of lockdep statistics are unsigned. It is better to use unsigned int instead of int. Remove unused variables. - max_recursion_depth - nr_cyclic_check_recursions - nr_find_usage_forwards_recursions - nr_find_usage_backwards_recursions Signed-off-by: Kobe Wu <kobe-cp.wu@mediatek.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: <wsd_upstream@mediatek.com> Cc: Eason Lin <eason-yh.lin@mediatek.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1561365348-16050-1-git-send-email-kobe-cp.wu@mediatek.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25locking/atomics: Use sed(1) instead of non-standard head(1) optionMichael Forney
POSIX says the -n option must be a positive decimal integer. Not all implementations of head(1) support negative numbers meaning offset from the end of the file. Instead, the sed expression '$d' has the same effect of removing the last line of the file. Signed-off-by: Michael Forney <mforney@mforney.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190618053306.730-1-mforney@mforney.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-25locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && ↵Arnd Bergmann
CONFIG_PROVE_LOCKING The last cleanup patch triggered another issue, as now another function should be moved into the same section: kernel/locking/lockdep.c:3580:12: error: 'mark_lock' defined but not used [-Werror=unused-function] static int mark_lock(struct task_struct *curr, struct held_lock *this, Move mark_lock() into the same #ifdef section as its only caller, and remove the now-unused mark_lock_irq() stub helper. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yuyang Du <duyuyang@gmail.com> Fixes: 0d2cc3b34532 ("locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING") Link: https://lkml.kernel.org/r/20190617124718.1232976-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 19:01:56 +0000