summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-13Merge tag 'vfio-ccw-20181113' of ↵Martin Schwidefsky
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Pull vfio-ccw from Cornelia Huck with the following changes: - Several bugfixes for vfio-ccw
2018-11-13drm/amdgpu: fix bug with IH ring setupPhilip Yang
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-13Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"Bjorn Helgaas
This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com [2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-11-13arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.Christoph Muellner
This patch fixes the wrong polarity setting for the PCIe host driver's pre-reset pin for rk3399-puma-haikou. Without this patch link training will most likely fail. Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM") Cc: stable@vger.kernel.org Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-13Btrfs: fix rare chances for data loss when doing a fast fsyncFilipe Manana
After the simplification of the fast fsync patch done recently by commit b5e6c3e170b7 ("btrfs: always wait on ordered extents at fsync time") and commit e7175a692765 ("btrfs: remove the wait ordered logic in the log_one_extent path"), we got a very short time window where we can get extents logged without writeback completing first or extents logged without logging the respective data checksums. Both issues can only happen when doing a non-full (fast) fsync. As soon as we enter btrfs_sync_file() we trigger writeback, then lock the inode and then wait for the writeback to complete before starting to log the inode. However before we acquire the inode's lock and after we started writeback, it's possible that more writes happened and dirtied more pages. If that happened and those pages get writeback triggered while we are logging the inode (for example, the VM subsystem triggering it due to memory pressure, or another concurrent fsync), we end up seeing the respective extent maps in the inode's list of modified extents and will log matching file extent items without waiting for the respective ordered extents to complete, meaning that either of the following will happen: 1) We log an extent after its writeback finishes but before its checksums are added to the csum tree, leading to -EIO errors when attempting to read the extent after a log replay. 2) We log an extent before its writeback finishes. Therefore after the log replay we will have a file extent item pointing to an unwritten extent (and without the respective data checksums as well). This could not happen before the fast fsync patch simplification, because for any extent we found in the list of modified extents, we would wait for its respective ordered extent to finish writeback or collect its checksums for logging if it did not complete yet. Fix this by triggering writeback again after acquiring the inode's lock and before waiting for ordered extents to complete. Fixes: e7175a692765 ("btrfs: remove the wait ordered logic in the log_one_extent path") Fixes: b5e6c3e170b7 ("btrfs: always wait on ordered extents at fsync time") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-13s390/cio: Fix cleanup when unsupported IDA format is usedEric Farman
Direct returns from within a loop are rude, but it doesn't mean it gets to avoid releasing the memory acquired beforehand. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20181109023937.96105-3-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-11-13s390/cio: Fix cleanup of pfn_array alloc failureEric Farman
If pfn_array_alloc fails somehow, we need to release the pfn_array_table that was malloc'd earlier. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20181109023937.96105-2-farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-11-13vfio: ccw: Register mediated device once all structures are initializedPierre Morel
Let's register the mediated device when all the data structures which could be used are initialized. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <1540487720-11634-3-git-send-email-pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-11-13s390/cio: make vfio_ccw_io_region staticSebastian Ott
Fix the following sparse warning: drivers/s390/cio/vfio_ccw_drv.c:25:19: warning: symbol 'vfio_ccw_io_region' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Message-Id: <alpine.LFD.2.21.1810151328570.1636@schleppi.aag-de.ibmmobiledemo.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-11-13drm/meson: venc: dmt mode must use encpJorge Ramirez-Ortiz
The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542048069-22603-1-git-send-email-jramirez@baylibre.com
2018-11-13netfilter: nf_tables: fix use-after-free when deleting compat expressionsFlorian Westphal
nft_compat ops do not have static storage duration, unlike all other expressions. When nf_tables_expr_destroy() returns, expr->ops might have been free'd already, so we need to store next address before calling expression destructor. For same reason, we can't deref match pointer after nft_xt_put(). This can be easily reproduced by adding msleep() before nft_match_destroy() returns. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-13netfilter: xt_RATEEST: remove netns exit routineTaehee Yoo
xt_rateest_net_exit() was added to check whether rules are flushed successfully. but ->net_exit() callback is called earlier than ->destroy() callback. So that ->net_exit() callback can't check that. test commands: %ip netns add vm1 %ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \ --dport 1111 -j RATEEST --rateest-name ap \ --rateest-interval 250ms --rateest-ewma 0.5s %ip netns del vm1 splat looks like: [ 668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables [ 668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21 [ 668.813518] Workqueue: netns cleanup_net [ 668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49 [ 668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282 [ 668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000 [ 668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74 [ 668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be [ 668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08 [ 668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000 [ 668.813518] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 668.813518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0 [ 668.813518] Call Trace: [ 668.813518] ? unregister_netdevice_many+0xe0/0xe0 [ 668.813518] ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST] [ 668.813518] ? default_device_exit+0x1ca/0x270 [ 668.813518] ? remove_proc_entry+0x1cd/0x390 [ 668.813518] ? dev_change_net_namespace+0xd00/0xd00 [ 668.813518] ? __init_waitqueue_head+0x130/0x130 [ 668.813518] ops_exit_list.isra.10+0x94/0x140 [ 668.813518] cleanup_net+0x45b/0x900 [ 668.813518] ? net_drop_ns+0x110/0x110 [ 668.813518] ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80 [ 668.813518] ? save_trace+0x300/0x300 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? process_one_work+0xb60/0x1de0 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? __lock_acquire+0x4500/0x4500 [ 668.813518] ? __lock_is_held+0xb4/0x140 [ 668.813518] process_one_work+0xc13/0x1de0 [ 668.813518] ? pwq_dec_nr_in_flight+0x3c0/0x3c0 [ 668.813518] ? set_load_weight+0x270/0x270 [ ... ] Fixes: 3427b2ab63fa ("netfilter: make xt_rateest hash table per net") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-13opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage callKeerthy
_get_optimal_vdd_voltage call provides new_supply_vbb->u_volt as the reference voltage while it should be really new_supply_vdd->u_volt. Cc: 4.16+ <stable@vger.kernel.org> # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-13opp: ti-opp-supply: Dynamically update u_volt_minKeerthy
The voltage range (min, max) provided in the device tree is from the data manual and is pretty big, catering to a wide range of devices. On a i2c read/write failure the regulator_set_voltage_triplet function falls back to set voltage between min and max. The min value from Device Tree can be lesser than the optimal value and in that case that can lead to a hang or crash. Hence set the u_volt_min dynamically to the optimal voltage value. Cc: 4.16+ <stable@vger.kernel.org> # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-12RISC-V: Silence some module warnings on 32-bitOlof Johansson
Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: lib: Fix build error for 64-bitOlof Johansson
Fixes the following build error from tinyconfig: riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8': fair.c:(.text+0x70): undefined reference to `__lshrti3' riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ': clocksource.c:(.text+0x334): undefined reference to `__lshrti3' Fixes: 7f47c73b355f ("RISC-V: Build tishift only on 64-bit") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12riscv: add missing vdso_install targetDavid Abdurachmanov
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12riscv: fix spacing in struct pt_regsDavid Abdurachmanov
Replace 8 spaces with tab to match styling. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: defconfig: Enable printk timestampsAnup Patel
The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-13btrfs: Always try all copies when reading extent buffersNikolay Borisov
When a metadata read is served the endio routine btree_readpage_end_io_hook is called which eventually runs the tree-checker. If tree-checker fails to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This leads to btree_read_extent_buffer_pages wrongly assuming that all available copies of this extent buffer are wrong and failing prematurely. Fix this modify btree_read_extent_buffer_pages to read all copies of the data. This failure was exhibitted in xfstests btrfs/124 which would spuriously fail its balance operations. The reason was that when balance was run following re-introduction of the missing raid1 disk __btrfs_map_block would map the read request to stripe 0, which corresponded to devid 2 (the disk which is being removed in the test): item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112 length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1 io_align 65536 io_width 65536 sector_size 4096 num_stripes 2 sub_stripes 1 stripe 0 devid 2 offset 2156920832 dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8 stripe 1 devid 1 offset 3553624064 dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca This caused read requests for a checksum item that to be routed to the stale disk which triggered the aforementioned logic involving EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of the balance operation. Fixes: a826d6dcb32d ("Btrfs: check items for correctness as we search") CC: stable@vger.kernel.org # 4.4+ Suggested-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-12SUNRPC: Fix a bogus get/put in generic_key_to_expire()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cacheTrond Myklebust
Commit 07d02a67b7fa causes a use-after free in the RPCSEC_GSS credential destroy code, because the call to get_rpccred() in gss_destroying_context() will now always fail to increment the refcount. While we could just replace the get_rpccred() with a refcount_set(), that would have the unfortunate consequence of resurrecting a credential in the credential cache for which we are in the process of destroying the RPCSEC_GSS context. Rather than do this, we choose to make a copy that is never added to the cache and use that to destroy the context. Fixes: 07d02a67b7fa ("SUNRPC: Simplify lookup code") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12NFSv4: Ensure that the state manager exits the loop on SIGKILLTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNINGTrond Myklebust
If we exit the NFSv4 state manager due to a umount, then we can end up leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes the nfs4_client to be rereferenced before it is destroyed, then we end up never being able to recover state. Fixes: 47c2199b6eb5 ("NFSv4.1: Ensure state manager thread dies on last ...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.15+
2018-11-12drm/amdgpu: set system aperture to cover whole FB regionshaoyunl
In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-12Input: atkbd - clean up indentation issueColin Ian King
Trivial fix to clean up indentation issues, add missing tab Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: st1232 - convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: migor_ts - convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: dt-bindings - fix a typo in file input-reset.txtDing Tao
Replace sysrq-reset-seq with keyset. Signed-off-by: Ding Tao <miyatsu@qq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: cros_ec_keyb - fix button/switch capability reportsBrian Norris
The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: elan_i2c - add ELAN0620 to the ACPI tablePatrick Gaskin
Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin <patrick@pgaskin.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12Input: matrix_keypad - check for errors from of_get_named_gpio()Christian Hoff
"of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff <christian_hoff@gmx.net> Suggested-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-11-12libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSDDiego Viola
med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q). Set model_rev to NULL and blacklist the device. Cc: stable@vger.kernel.org Signed-off-by: Diego Viola <diego.viola@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12MIPS: Let early memblock_alloc*() allocate memories bottom-upHuacai Chen
After switched to NO_BOOTMEM, there are several boot failures. Some of them have been fixed and some of them haven't. I find that many of them are because of memory allocations are top-down, while the old behavior is bottom-up. This patch let early memblock_alloc*() allocate memories bottom-up to avoid some potential problems. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM") Patchwork: https://patchwork.linux-mips.org/patch/21069/ References: https://patchwork.linux-mips.org/patch/21031/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com>
2018-11-12MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driverAaro Koskinen
Re-enable OCTEON USB driver which is needed on older hardware (e.g. EdgeRouter Lite) for mass storage etc. This got accidentally deleted when config options were changed for OCTEON2/3 USB. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: f922bc0ad08b ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers") Patchwork: https://patchwork.linux-mips.org/patch/21077/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.14+
2018-11-12ARC: mm: fix uninitialised signal code in do_page_faultEugeniy Paltsev
Commit 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate") introduced undefined behaviour by leaving si_code unitiailized and leaking random kernel values to user space. Fixes: 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: [plat-hsdk] Enable DW APB GPIO supportEugeniy Paltsev
Enable GPIO support on HSDK. HSDK SoC includes Synopsys DesignWare DW_apb_gpio IP with 24 GPIOs mapped onto port A. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARCv2: boot log unaligned access in useVineet Gupta
ARC gcc 8.x generates unaligned accesses by default, so call that out Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: IOC: panic if kernel was started with previously enabled IOCEugeniy Paltsev
If IOC was already enabled (due to bootloader) it technically needs to be reconfigured with aperture base,size corresponding to Linux memory map which will certainly be different than uboot's. But disabling and reenabling IOC when DMA might be potentially active is tricky business. To avoid random memory issues later, just panic here and ask user to upgrade bootloader to one which doesn't enable IOC This was actually seen as issue on some of the HSDK board with a version of uboot which enabled IOC. There were random issues later with starting of X or peripherals etc. Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL and ARC_REG_IO_COH_ENABLE registers by definitions. Inspired by: https://lkml.org/lkml/2018/1/19/557 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12Merge tag 'am654-fixes-for-v4.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into fixes Texas Instruments AM65x fixes for v4.20 - Fix the wkup uart instance addresses to use proper cell sizes, otherwise the uart fails to probe. * tag 'am654-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654: Fix wakeup_uart reg address Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-12Merge tag 'qcom-fixes-for-4.20-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm ARM64 DT Fixes for 4.20-rc1 * Fix reserved gpio ranges for SDM845 and MSM8998 * tag 'qcom-fixes-for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP arm64: dts: sdm845-mtp: Reserve reserved gpios Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-12block: copy ioprio in __bio_clone_fast() and bounceHannes Reinecke
We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3ff0a ("block: move bio io prio to a new field") Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixed up subject, and ordered stores. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12bnx2x: Assign unique DMAE channel number for FW DMAE transactions.Sudarsana Reddy Kalluru
Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12perf tools: Fix crash on synthesizing the unitJiri Olsa
Adam reported a record command crash for simple session like: $ perf record -e cpu-clock ls with following backtrace: Program received signal SIGSEGV, Segmentation fault. 3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]); (gdb) bt #0 perf_event__synthesize_event_update_unit #1 0x000000000051e469 in perf_event__synthesize_extra_attr #2 0x00000000004445cb in record__synthesize #3 0x0000000000444bc5 in __cmd_record ... We synthesize an update event that needs to touch the evsel id array, which is not defined at that time. Fix this by forcing the id allocation for events with their unit defined. Reflecting possible read_format ID bit in the attr tests. Reported-by: Yongxin Liu <yongxin.liu@outlook.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adam Lee <leeadamrobert@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477 Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update") Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-12kyber: fix wrong strlcpy() size in trace_kyber_latency()Omar Sandoval
When copying to the latency type, we should be passing LATENCY_TYPE_LEN, not DOMAIN_LEN (this isn't a problem in practice because we only pass "total" or "I/O"). Fix it by changing all of the strlcpy() calls to use sizeof(). Fixes: 6c3b7af1c975 ("kyber: add tracepoints") Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12netfilter: nf_tables: don't use position attribute on rule replacementFlorian Westphal
Its possible to set both HANDLE and POSITION when replacing a rule. In this case, the rule at POSITION gets replaced using the userspace-provided handle. Rule handles are supposed to be generated by the kernel only. Duplicate handles should be harmless, however better disable this "feature" by only checking for the POSITION attribute on insert operations. Fixes: 5e94846686d0 ("netfilter: nf_tables: add insert operation") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12selftests: add script to stress-test nft packet path vs. control planeFlorian Westphal
Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop. Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically. This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_tables: don't skip inactive chains during updateFlorian Westphal
There is no synchronization between packet path and the configuration plane. The packet path uses two arrays with rules, one contains the current (active) generation. The other either contains the last (obsolete) generation or the future one. Consider: cpu1 cpu2 nft_do_chain(c); delete c net->gen++; genbit = !!net->gen; rules = c->rg[genbit]; cpu1 ignores c when updating if c is not active anymore in the new generation. On cpu2, we now use rules from wrong generation, as c->rg[old] contains the rules matching 'c' whereas c->rg[new] was not updated and can even point to rules that have been free'd already, causing a crash. To fix this, make sure that 'current' to the 'next' generation are identical for chains that are going away so that c->rg[new] will just use the matching rules even if genbit was incremented already. Fixes: 0cbc06b3faba7 ("netfilter: nf_tables: remove synchronize_rcu in commit phase") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12drm/i915: Fix hpd handling for pins with two encodersVille Syrjälä
In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: stable@vger.kernel.org # 4.19+ Cc: Lyude Paul <lyude@redhat.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> (cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 20:12:57 +0000