summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-25Merge tag 'f2fs-fix-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "This includes major bug fixes introduced in 5.18-rc1 and 5.17+: - Remove obsolete whint_mode (5.18-rc1) - Fix IO split issue caused by op_flags change in f2fs (5.18-rc1) - Fix a wrong condition check to detect IO failure loop (5.18-rc1) - Fix wrong data truncation during roll-forward (5.17+)" * tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: should not truncate blocks during roll-forward recovery f2fs: fix wrong condition check when failing metapage read f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders f2fs: remove obsolete whint_mode
2022-04-25clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
2022-04-25bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()Christophe JAILLET
This code is really spurious. It always returns an ERR_PTR, even when err is known to be 0 and calls put_device() after a successful device_register() call. It is likely that the return statement in the normal path is missing. Add 'return rdev;' to fix it. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
2022-04-25no-MMU: expose vmalloc_huge() for alloc_large_system_hash()Linus Torvalds
It turns out that for the CONFIG_MMU=n builds, vmalloc_huge() was never defined, since it's defined in mm/vmalloc.c, which doesn't get built for the no-MMU configurations. Just implement the trivial wrapper for the no-MMU case too. In fact, just make it an alias to the existing __vmalloc() function that has the same signature. Link: https://lore.kernel.org/all/CAMuHMdVdx2V1uhv_152Sw3_z2xE0spiaWp1d6Ko8-rYmAxUBAg@mail.gmail.com/ Link: https://lore.kernel.org/all/CA+G9fYscb1y4a17Sf5G_Aibt+WuSf-ks_Qjw9tYFy=A4sjCEug@mail.gmail.com/ Link: https://lore.kernel.org/all/20220425150356.GA4138752@roeck-us.net/ Reported-and-tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-25hwmon: (pmbus) disable PEC if not enabledAdam Wujek
Explicitly disable PEC when the client does not support it. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without a new code, at the second load of the driver (or bind) the "flags" variable is not updated to avoid PEC usage. As a consequence the further communication with the device is done with the PEC enabled, which is wrong and may fail. The implementation first disable the I2C_CLIENT_PEC flag, then the old code enable it if needed. Fixes: 4e5418f787ec ("hwmon: (pmbus_core) Check adapter PEC support") Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220420145059.431061-1-dev_public@wujek.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-25Documentation: siphash: disambiguate HalfSipHash algorithm from hsiphash ↵Eric Biggers
functions Fix the documentation for the hsiphash functions to avoid conflating the HalfSipHash algorithm with the hsiphash functions, since these functions actually implement either HalfSipHash or SipHash, and random.c now uses HalfSipHash (in a very special way) without the hsiphash functions. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-25Documentation: siphash: enclose HalfSipHash usage example in the literal blockBagas Sanjaya
Render usage example of HalfSipHash function as code block by using literal block syntax. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Biggers <ebiggers@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-25Documentation: siphash: convert danger note to warning for HalfSipHashBagas Sanjaya
Render danger paragraph into warning block for emphasization. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Biggers <ebiggers@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-25random: document crng_fast_key_erasure() destination possibilityJason A. Donenfeld
This reverts 35a33ff3807d ("random: use memmove instead of memcpy for remaining 32 bytes"), which was made on a totally bogus basis. The thing it was worried about overlapping came from the stack, not from one of its arguments, as Eric pointed out. But the fact that this confusion even happened draws attention to the fact that it's a bit non-obvious that the random_data parameter can alias chacha_state, and in fact should do so when the caller can't rely on the stack being cleared in a timely manner. So this commit documents that. Reported-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-25ASoC: dmaengine: Restore NULL prepare_slave_config() callbackCodrin Ciubotariu
As pointed out by Sascha Hauer, this patch changes: if (pmc->config && !pcm->config->prepare_slave_config) <do nothing> to: if (pmc->config && !pcm->config->prepare_slave_config) snd_dmaengine_pcm_prepare_slave_config() This breaks the drivers that do not need a call to dmaengine_slave_config(). Drivers that still need to call snd_dmaengine_pcm_prepare_slave_config(), but have a NULL pcm->config->prepare_slave_config should use snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config callback. Fixes: 9a1e13440a4f ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback") Reported-by: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25ASoC: atmel: mchp-pdmc: set prepare_slave_configCodrin Ciubotariu
Since a pointer to struct snd_dmaengine_pcm_config is passed, snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's explicitly set in prepare_slave_config. Fixes: 50291652af52 ("ASoC: atmel: mchp-pdmc: add PDMC driver") Suggested-by: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220421125403.2180824-2-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25ASoC: max98090: Generate notifications on changes for custom controlMark Brown
The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25ASoC: max98090: Reject invalid values in custom control put()Mark Brown
The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25Revert "arm64: dts: tegra: Fix boolean properties with values"Arnd Bergmann
This reverts commit 1a67653de0dd, which caused a boot regression. The behavior of the "drive-push-pull" in the kernel does not match what the binding document describes. Revert Rob's patch to make the DT match the kernel again, rather than the binding. Link: https://lore.kernel.org/lkml/YlVAy95eF%2F9b1nmu@orome/ Reported-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-25tcp: make sure treq->af_specific is initializedEric Dumazet
syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWATEric Dumazet
I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Doug Porter <dsp@fb.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: mscc: ocelot: don't add VID 0 to ocelot->vlans when leaving VLAN-aware ↵Vladimir Oltean
bridge DSA, through dsa_port_bridge_leave(), first notifies the port of the fact that it left a bridge, then, if that bridge was VLAN-aware, it notifies the port of the change in VLAN awareness state, towards VLAN-unaware mode. So ocelot_port_vlan_filtering() can be called when ocelot_port->bridge is NULL, and this makes ocelot_add_vlan_unaware_pvid() create a struct ocelot_bridge_vlan with a vid of 0 and an "untagged" setting of true on that port. In a way this structure correctly reflects the reality, but by design, VID 0 (OCELOT_STANDALONE_PVID) was not meant to be kept in the bridge VLAN list of the driver, but managed separately. Having OCELOT_STANDALONE_PVID in ocelot->vlans makes us trip up on several sanity checks that did not expect to have this VID there. For example, after we leave a VLAN-aware bridge and we re-join it, we can no longer program egress-tagged VLANs to hardware: # ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up # ip link set swp0 master br0 # ip link set swp0 nomaster # ip link set swp0 master br0 # bridge vlan add dev swp0 vid 100 Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs. But this configuration is in fact supported by the hardware, since we could use OCELOT_PORT_TAG_NATIVE. According to its comment: /* all VLANs except the native VLAN and VID 0 are egress-tagged */ yet when assessing the eligibility for this mode, we do not check for VID 0 in ocelot_port_uses_native_vlan(), instead we just ensure that ocelot_port_num_untagged_vlans() == 1. This is simply because VID 0 doesn't have a bridge VLAN structure. The way I identify the problem is that ocelot_port_vlan_filtering(false) only means to call ocelot_add_vlan_unaware_pvid() when we dynamically turn off VLAN awareness for a bridge we are under, and the PVID changes from the bridge PVID to a reserved PVID based on the bridge number. Since OCELOT_STANDALONE_PVID is statically added to the VLAN table during ocelot_vlan_init() and never removed afterwards, calling ocelot_add_vlan_unaware_pvid() for it is not intended and does not serve any purpose. Fix the issue by avoiding the call to ocelot_add_vlan_unaware_pvid(vid=0) when we're resetting VLAN awareness after leaving the bridge, to become a standalone port. Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: mscc: ocelot: ignore VID 0 added by 8021q moduleVladimir Oltean
Both the felix DSA driver and ocelot switchdev driver declare dev->features & NETIF_F_HW_VLAN_CTAG_FILTER under certain circumstances*, so the 8021q module will add VID 0 to our RX filter when the port goes up, to ensure 802.1p traffic is not dropped. We treat VID 0 as a special value (OCELOT_STANDALONE_PVID) which deliberately does not have a struct ocelot_bridge_vlan associated with it. Instead, this gets programmed to the VLAN table in ocelot_vlan_init(). If we allow external calls to modify VID 0, we reach the following situation: # ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up # ip link set swp0 master br0 # ip link set swp0 up # this adds VID 0 to ocelot->vlans with untagged=false bridge vlan port vlan-id swp0 1 PVID Egress Untagged # the bridge also adds VID 1 br0 1 PVID Egress Untagged # bridge vlan add dev swp0 vid 100 untagged Error: mscc_ocelot_switch_lib: Port with egress-tagged VLANs cannot have more than one egress-untagged (native) VLAN. This configuration should have been accepted, because ocelot_port_manage_port_tag() should select OCELOT_PORT_TAG_NATIVE. Yet it isn't, because we have an entry in ocelot->vlans which says VID 0 should be egress-tagged, something the hardware can't do. Fix this by suppressing additions/deletions on VID 0 and managing this VLAN exclusively using OCELOT_STANDALONE_PVID. *DSA toggles it when the port becomes VLAN-aware by joining a VLAN-aware bridge. Ocelot declares it unconditionally for some reason. Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: dsa: flood multicast to CPU when slave has IFF_PROMISCVladimir Oltean
Certain DSA switches can eliminate flooding to the CPU when none of the ports have the IFF_ALLMULTI or IFF_PROMISC flags set. This is done by synthesizing a call to dsa_port_bridge_flags() for the CPU port, a call which normally comes from the bridge driver via switchdev. The bridge port flags and IFF_PROMISC|IFF_ALLMULTI have slightly different semantics, and due to inattention/lack of proper testing, the IFF_PROMISC flag allows unknown unicast to be flooded to the CPU, but not unknown multicast. This must be fixed by setting both BR_FLOOD (unicast) and BR_MCAST_FLOOD in the synthesized dsa_port_bridge_flags() call, since IFF_PROMISC means that packets should not be filtered regardless of their MAC DA. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25ip6_gre: Make o_seqno start from 0 in native modePeilin Ye
For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25ip_gre: Make o_seqno start from 0 in native modePeilin Ye
For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: lan966x: fix a couple off by one bugsDan Carpenter
The lan966x->ports[] array has lan966x->num_phys_ports elements. These are assigned in lan966x_probe(). That means the > comparison should be changed to >=. The first off by one check is harmless but the second one could lead to an out of bounds access and a crash. Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net/smc: sync err code when tcp connection was refusedliuyacan
In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely. Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns: Add missing fwnode_handle_put in hns_mac_initPeng Wu
In one of the error paths of the device_for_each_child_node() loop in hns_mac_init, add missing call to fwnode_handle_put. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25Merge branch 'hns3-fixes'David S. Miller
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: add return value for mailbox handling in PFJian Shen
Currently, there are some querying mailboxes sent from VF to PF, and VF will wait the PF's handling result. For mailbox HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail when the input parameter is invalid, but the prototype of their handler function is void. In this case, PF always return success to VF, which may cause the VF get incorrect result. Fixes it by adding return value for these function. Fixes: 63b1279d9905 ("net: hns3: check queue id range before using") Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: add validity check for message data lengthJian Shen
Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: modify the return code of hclge_get_ring_chain_from_mbxJie Wang
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to return -EINVAL for the invalid parameter case. So this patch fixes it by return -EINVAL in this abnormal branch. Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: fix error log of tx/rx tqps statsPeng Li
The comments in function hclge_comm_tqps_update_stats is not right, so fix it. Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: align the debugfs output to the leftHao Chen
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is aligned to the right, it's not aligned with output of other debugfs node, so uniform their output info. Fixes: 907676b13071 ("net: hns3: use tx bounce buffer for small packets") Fixes: e44c495d95e0 ("net: hns3: refactor queue info of debugfs") Fixes: 77e9184869c9 ("net: hns3: refactor dump bd info of debugfs") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: hns3: clear inited state and stop client after failed to register netdevJian Shen
If failed to register netdev, it needs to clear INITED state and stop client in case of cause problem when concurrency with uninitialized process of driver. Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect printing of memory size of IPVS connection hash table, from Pengcheng Yang. 2) Fix spurious EEXIST errors in nft_set_rbtree. 3) Remove leftover empty flowtable file, from Rongguang Wei. 4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25netfilter: Update ip6_route_me_harder to consider L3 domainMartin Willi
The commit referenced below fixed packet re-routing if Netfilter mangles a routing key property of a packet and the packet is routed in a VRF L3 domain. The fix, however, addressed IPv4 re-routing, only. This commit applies the same behavior for IPv6. While at it, untangle the nested ternary operator to make the code more readable. Fixes: 6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain") Cc: stable@vger.kernel.org Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-25ceph: fix possible NULL pointer dereference for req->r_sessionXiubo Li
The request will be inserted into the ci->i_unsafe_dirops before assigning the req->r_session, so it's possible that we will hit NULL pointer dereference bug here. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/55327 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-04-25ceph: remove incorrect session state checkXiubo Li
Once the session is opened the s->s_ttl will be set, and when receiving a new mdsmap and the MDS map is changed, it will be possibly will close some sessions and open new ones. And then some sessions will be in CLOSING state evening without unmounting. URL: https://tracker.ceph.com/issues/54979 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-04-25ceph: get snap_rwsem read lock in handle_cap_export for ceph_add_capNiels Dossche
ceph_add_cap says in its function documentation that the caller should hold the read lock on the session snap_rwsem. Furthermore, not only ceph_add_cap needs that lock, when it calls to ceph_lookup_snap_realm it eventually calls ceph_get_snap_realm which states via lockdep that snap_rwsem needs to be held. handle_cap_export calls ceph_add_cap without that mdsc->snap_rwsem held. Thus, since ceph_get_snap_realm and ceph_add_cap both need the lock, the common place to acquire that lock is inside handle_cap_export. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-04-25libceph: disambiguate cluster/pool full log messageIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-04-25netfilter: flowtable: Remove the empty fileRongguang Wei
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also removed(nf_flow_table_ipv4.c is empty). Fixes: c42ba4290b2147aa ("netfilter: flowtable: remove ipv4/ipv6 modules") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-25ALSA: fireworks: fix wrong return count shorter than expected by 4 bytesTakashi Sakamoto
ALSA fireworks driver has a bug in its initial state to return count shorter than expected by 4 bytes to userspace applications when handling response frame for Echo Audio Fireworks transaction. It's due to missing addition of the size for the type of event in ALSA firewire stack. Fixes: 555e8a8f7f14 ("ALSA: fireworks: Add command/response functionality into hwdep interface") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakersZihao Wang
Lenovo Yoga Duet 7 13ITL6 has Realtek ALC287 and built-in speakers do not work out of the box. The fix developed for Yoga 7i 14ITL5 also enables speaker output for this model. Signed-off-by: Zihao Wang <wzhd@ustc.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220424084120.74125-1-wzhd@ustc.edu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25Merge branch 'topic/firewire' into for-linusTakashi Iwai
Pull FireWire fixes Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25firewire: core: extend card->lock in fw_core_handle_bus_resetNiels Dossche
card->local_node and card->bm_retries are both always accessed under card->lock. fw_core_handle_bus_reset has a check whose condition depends on card->local_node and whose body writes to card->bm_retries. Both of these accesses are not under card->lock. Move the lock acquiring of card->lock to before this check such that these accesses do happen when card->lock is held. fw_destroy_nodes is called inside the check. Since fw_destroy_nodes already acquires card->lock inside its function body, move this out to the callsites of fw_destroy_nodes. Also add a comment to indicate which locking is necessary when calling fw_destroy_nodes. Cc: <stable@vger.kernel.org> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25firewire: remove check of list iterator against head past the loop bodyJakob Koschel
When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Cc: <stable@vger.kernel.org> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20220409041243.603210-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25firewire: fix potential uaf in outbound_phy_packet_callback()Chengfeng Ye
&e->event and e point to the same address, and &e->event could be freed in queue_event. So there is a potential uaf issue if we dereference e after calling queue_event(). Fix this by adding a temporary variable to maintain e->client in advance, this can avoid the potential uaf issue. Cc: <stable@vger.kernel.org> Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20220409041243.603210-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-25cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probeXiaobing Luo
-------------------------------------------- unreferenced object 0xffff000010742a00 (size 128): comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b4dfebaa>] __kmalloc+0x338/0x474 [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c [<000000007d6082a0>] platform_probe+0x98/0x11c [<00000000c990f549>] really_probe+0x234/0x5a0 [<000000002d9fecc6>] __driver_probe_device+0x194/0x224 [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180 [<000000006720e418>] bus_for_each_drv+0xf8/0x160 [<00000000df4f14f6>] __device_attach+0x174/0x29c [<00000000782002fb>] device_initial_probe+0x20/0x30 [<00000000c2681b06>] bus_probe_device+0xfc/0x110 [<00000000964cf3bd>] device_add+0x5f0/0xcd0 [<000000004b9264e3>] platform_device_add+0x198/0x390 [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210 [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168 [<000000000377cc7c>] do_one_initcall+0xe4/0x570 -------------------------------------------- if sun50i_cpufreq_get_efuse failed, then opp_tables leak. Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver") Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-25drm/i915: Check EDID for HDR static metadata when choosing blcJouni Högander
We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Filippo Falezza <filippo.falezza@outlook.it> Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> (cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-25drm/i915: Fix DISP_POS_Y and DISP_HEIGHT definesHans de Goede
Commit 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16). This breaks the primary display pane on at least pineview machines, fix the mask to fix the primary display pane only showing black. Tested on an Acer One AO532h with an Intel N450 SoC. Fixes: 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418150936.5499-1-hdegoede@redhat.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 681f8a5c6e372dbfd2a313ace417e7749543de1d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-24Linux 5.18-rc4v5.18-rc4Linus Torvalds
2022-04-24clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as criticalSamuel Holland
Because some newer hardware variants have multiple possible parents for the RTC's timekeeping clock, this driver models it as a "rtc-32k" clock. However, it does not add any consumer for this clock. This causes the common clock framework to disable it, preventing RTC time access. Since the RTC's timekeeping clock should always be enabled, regardless of which drivers are loaded, let's mark this clock as critical instead of adding a consumer in the RTC driver. Fixes: d91612d7f01a ("clk: sunxi-ng: Add support for the sun6i RTC clocks") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220411050100.40964-1-samuel@sholland.org
generated by cgit (git 2.34.1) at 2025-09-12 19:21:36 +0000