summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-14x86 Fix VMI crash on boot in 2.6.28-rc8Zachary Amsden
VMI initialiation can relocate the fixmap, causing early_ioremap to malfunction if it is initialized before the relocation. To fix this, VMI activation is split into two phases; the detection, which must happen before setting up ioremap, and the activation, which must happen after parsing early boot parameters. This fixes a crash on boot when VMI is enabled under VMware. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-14Revert "sched_clock: prevent scd->clock from moving backwards"Linus Torvalds
This reverts commit 5b7dba4ff834259a5623e03a565748704a8fe449, which caused a regression in hibernate, reported by and bisected by Fabio Comolli. This revert fixes http://bugzilla.kernel.org/show_bug.cgi?id=12155 http://bugzilla.kernel.org/show_bug.cgi?id=12149 Bisected-by: Fabio Comolli <fabio.comolli@gmail.com> Requested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-14[ARM] fix kernel-doc syntaxRandy Dunlap
Fix kernel-doc notation to use correct syntax. Even though this should be moved to where the function is actually implemented... Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14ASoC: switch davinci DPRINTK to pr_debug()Alexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-14[ARM] arch/arm/common/sa1111.c: Correct error handling codeJulia Lawall
If it is reasonable to apply PTR_ERR to the result of calling clk_get, then that result should first be tested with IS_ERR, not with !. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E,E1; @@ if ( - E == NULL + IS_ERR(E) ) { <+... when != E = E1 PTR_ERR(E) ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14ieee1394: add quirk fix for Freecom HDDStefan Richter
According to http://bugzilla.kernel.org/show_bug.cgi?id=12206, Freecom FireWire Hard Drive 1TB reports max_rom=2 but returns garbage if block read requests are used to read the config ROM. Force max_rom=0 to limit them to quadlet read requests. Reported-by: Christian Mueller <cm1@mumac.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-12-14kbuild: fix string equality testing in tags.shJiri Slaby
Test of string equality in shells is =, not C-like ==. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-14kbuild: fix make tags/cscopeJiri Slaby
- fix combining O=... and tags - don't allow * expansion during sh function calls Signed-off-by: Jiri Slaby <jirislaby@gmail.com> [sam: use KBUILD_SRC to check if we use O=...] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-13powerpc/fsl-booke: Fix problem with _tlbil_va being interruptedKumar Gala
An example calling sequence which we did see: copy_user_highpage -> kmap_atomic -> flush_tlb_page -> _tlbil_va We got interrupted after setting up the MAS registers before the tlbwe and the interrupt handler that caused the interrupt also did a kmap_atomic (ide code) and thus on returning from the interrupt the MAS registers no longer contained the proper values. Since we dont save/restore MAS registers for normal interrupts we need to disable interrupts in _tlbil_va to ensure atomicity. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-13kbuild: fix make incompatibilitySam Ravnborg
"Paul Smith" <psmith@gnu.org> reported that we would fail to build with a new check that may be enabled in an upcoming version of make. The error was: Makefile:442: *** mixed implicit and normal rules. Stop. The problem is that we did stuff like this: config %config: ... The solution was simple - the above was split into two with identical prerequisites and commands. With only three lines it was not worth to try to avoid the duplication. Cc: "Paul Smith" <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-13[SCSI] scsi_lib: only call scsi_unprep_request() under queue lockJames Bottomley
It's called under that lock everywhere else and it does alter the request state, so it should be. This one occurance in scsi_requeue_command() could open a window where req->special is set to NULL while the requests is going through either timeout or completion processing leading to NULL pointer derefs of the sort complained of in bugzillas 12020 and 12195. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx: powerpc/40x: Add proper BOOTCFLAGS for cuboot-acadia
2008-12-13Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-highlander: Trivial endian casting fixes i2c-pmcmsp: Fix endianness misannotation
2008-12-13Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Commands needing to be retried require a complete re-initialization.
2008-12-13Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: IP32: Update defconfig MIPS: Add missing calls to plat_unmap_dma_mem. MIPS: Kconfig: Fix the arch-specific header path MIPS: Use EI/DI for MIPS R2.
2008-12-13console ASCII glyph 1:1 mappingIngo Brueckl
For the console, there is a 1:1 mapping of glyphs which cannot be found in the current font. This seems to be meant as a kind of 'emergency fallback' for fonts without unicode mapping which otherwise would display nothing readable on the screen. At the moment it affects all chars for which no substitution character is defined. In particular this means that for all chars (>= 128) where there is no iso88591-1/unicode character (e.g. control character area) you'll get the very strange 1:1 mapping of the (cp437) graphics card glyphs. I'm pretty sure that the 1:1 mapping should only affect strict ASCII code characters, i.e. chars < 128. The patch limits the mapping as it probably was meant anyway. Signed-off-by: Ingo Brueckl <ib@wupperonline.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Egmont Koblinger <egmont@uhulinux.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-13unicode table for cp437Ingo Brueckl
There is a major bug in the cp437 to unicode translation table. Char 0x7c is mapped to U+00a5 which is the Yen sign and wrong. The right mapping is U+00a6 (broken bar). Furthermore, a mapping for U+00b4 (a widely used character) is missing even though easily possible. The patch fixes these, as well as it provides a few other useful mappings. The changes are as follows: 0x0f (enhancement) enables a sort of currency symbol 0x27 (bug) enables a sort of acute accent which is a widely used character 0x44 (enhancement) enables a sort of icelandic capital letter eth 0x7c (major bug) corrects mapping 0xeb (enhancement) enables a sort of icelandic small letter eth 0xee (enhancement) enables a sort of math 'element of' Signed-off-by: Ingo Brueckl <ib@wupperonline.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-12smsc9420: add ethtool eeprom supportSteve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12smsc9420: add netpoll supportSteve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12smsc911x: make smsc911x_poll_controller staticSteve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-12-12sfc: Version 2.3Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Fix synchronisation of efx_mtd_{probe,rename,remove}Ben Hutchings
Currently efx_mtd_rename() can race with the probe() and remove() functions. Move probe() before device registration and remove() after unregistration. Move initialisation/update of all names based on the netdev name into a new function and call it under the RTNL immediately after registration. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Use kzalloc() to ensure struct efx_spi_device is fully initialisedBen Hutchings
Currently the mtd field is not initialised early enough. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Treat probe as unsuccessful if it scheduled a resetSteve Hodgson
From: Steve Hodgson <shodgson@solarflare.com> efx_pci_probe_main() can return success despite a reset being scheduled. Catch this and retry or abort probe depending on the reset type. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Use model numbers for PHY type namesBen Hutchings
Some of the PHY type names are overly generic. Change them to include the model numbers of the PHYs they represent. Correct the model number reference at the top of xfp_phy.c. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Use mutex_lock_interruptible() for ethtool EEPROM accessBen Hutchings
ethtool must contend with the MTD driver for the SPI bus lock, which may carry out long operations such as flash erase. Allow it to be interrupted while waiting. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Specify a meaningful component for loopback RX-side and PHY testsBen Hutchings
Our ethtool self-test result names each begin with a component name. For some results this is "port0", which is not very meaningful. Change that to "rx" or "phy" as appropriate. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Remove leading spacesBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add support for SFN4111TBen Hutchings
Add support code for the SFN4111T 100/1000/10GBASE-T reference design, based in part on the existing code for the SFE4001. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add support for Solarflare 10Xpress SFT9001Ben Hutchings
Add type codes for the new PHY and rename the SFX7101 type code. Add definition of clause 22 extension MMD. Adapt the 10Xpress SFX7101 code to support the SFT9001 as well. Clean up register definitions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Rework MAC, PHY and board event handlingBen Hutchings
From: Steve Hodgson <shodgson@solarflare.com> MAC, PHY and board events may be separately enabled and signalled. Our current arrangement of chaining the polling functions can result in events being missed. Change them to be more independent. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Implement auto-negotiationBen Hutchings
Add infrastructure for auto-negotiation of speed, duplex and flow control. When using 10Xpress, auto-negotiate flow control. While we're at it, clean up the code to warn when partner is not 10GBASE-T capable. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add support for sub-10G speedsBen Hutchings
The SFC4000 has a separate MAC for use at sub-10G speeds. Introduce an efx_mac_operations structure with implementations for the two MACs. Switch between the MACs as necessary. PHY settings are independent of the MAC, so add get_settings() and set_settings() to efx_phy_operations. Also add macs field to indicate which MACs the PHY is connected to. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Clean up MDIO flag settingBen Hutchings
We often want to set or clear a flag in an MDIO register, but avoid writing if no change is required since this can have side-effects. Encapsulate this in a function, mdio_clause45_set_flag(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Clean up board identificationBen Hutchings
Remove kluge for development boards with unspecified board type. Remove assumption of contiguous board type code assignments. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add phy_type device attributeBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add support for MMDs numbered >15Ben Hutchings
Combine DEVS0 and DEVS1 registers into a 32-bit mask instead of reading just DEVS0. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Remove MII extension cruftBen Hutchings
Replace efx_nic::link_options bitfield with link_speed (speed in Mbit/s) and link_fd (full duplex flag). Remove broken auto-negotiation functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Don't count RX checksum errors during loopback self-testBen Hutchings
The loopback self-test checks that IP packets with incorrect checksums are not altered when sent on a queue with checksum generation off. These should not contribute to RX error statistics. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Abbreviate self-test names so they are not truncatedBen Hutchings
Change "channel" to "chan". Shorten PHY loopback names. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Provide hints to irqbalance daemonBen Hutchings
Allocate IRQs with the name format <device>[-<type>]-<number> so that future versions of irqbalanced understand what we're doing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add option to use a separate channel for TX completionsNeil Turton
In a bidirectional forwarding test, we find that the best performance is achieved by sending the TX completion interrupts from one NIC to a CPU which shares an L2 cache with RX completion interrupts from the other NIC. To facilitate this, add an option (through a module parameter) to create separate channels for RX and TX completion with separate IRQs when MSI-X is available. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Restore phy_flash_cfg module parameterBen Hutchings
This is needed for recovery in case a PHY firmware upgrade is aborted. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Work around unreliable strap pinsBen Hutchings
The SFC4000 has strap pins indicating the presence of SPI flash and/or EEPROM. These pins are also used for GPIO, and in some cases they may be read wrongly at reset. However, on production boards it must boot from one or the other device, so we can assume the boot device is present and read the board config from there. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Clean up waits for flash/EEPROM operationsBen Hutchings
Make falcon_spi_wait() ignore the write timer - it is only relevant to write commands, it only works for the device that contains VPD, and it might not be initialised properly at all. Rename falcon_spi_fast_wait() to falcon_spi_wait_write(), reflecting its use, and make it wait up to 10 ms (not 1 ms) since buffered writes to EEPROM may take this long to complete. Make both wait functions sleep instead of busy-waiting. Replace wait for command completion at top of falcon_spi_cmd() with a single poll; no command should be running when the function starts. Correct some comments. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Make reset_workqueue driver-global rather than per-NICSteve Hodgson
Each reset is serialised by the rtnl_lock anyway, so there's no win per-NIC. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Correct interpretation of second param to ethtool phys_id()Ben Hutchings
A value of 0 means indefinite repetition (until interrupted). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Remove unneeded register writeBen Hutchings
This was only ever needed for an FPGA version of Falcon. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Change SPI lengths to type size_tBen Hutchings
Based on a patch by Andrew Morton. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 13:33:10 +0000