summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-01arm64: dts: imx8mm-venice-gw73xx: remove compatible in overlay fileFrank Li
Remove compatible string in overlay file to fix below warning: 'gw,imx8mm-gw73xx-0x' is not one of ['fsl,ls1043a-rdb', 'fsl,ls1043a-qds'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx93: Add LPSPI aliasCarlos Song
Add i.MX93 LPSPI alias for kernel LPSPI driver usage. Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8ulp: Add LPSPI aliasCarlos Song
Add i.MX8ULP LPSPI alias for kernel LPSPI driver usage. Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8dxl: Add LPSPI aliasCarlos Song
Add i.MX8DXL LPSPI alias for kernel LPSPI driver usage. Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8qm: Add LPSPI aliasCarlos Song
Add i.MX8QM LPSPI alias for kernel LPSPI driver usage. Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8qxp: Add LPSPI aliasCarlos Song
Add i.MX8QXP LPSPI alias for kernel LPSPI driver usage. Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01ARM: dts: imx6qdl: convert fsl,tx-d-cal to correct valueXu Yang
make dtbs_check has below warning: arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy@20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This will convert register raw value <0x5> to corresponding <106>. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8qxp: change usbphy1 compatibleXu Yang
Make fsl,imx8qxp-usbphy compatible with fsl,imx7ulp-usbphy to fix below warning: arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dtb: usbphy@5b100000: 'nxp,sim' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8qm: change usbphy1 compatibleXu Yang
Make fsl,imx8qm-usbphy compatible with fsl,imx7ulp-usbphy to fix below warning: arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: usbphy@5b100000: 'nxp,sim' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-11-01arm64: dts: imx8dxl-ss-conn: change usbphy1 compatibleXu Yang
Make fsl,imx8dxl-usbphy compatible with fsl,imx7ulp-usbphy to fix below warning: arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: usbphy@5b100000: 'nxp,sim' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-29ARM: dts: ti/omap: omap4-epson-embt2ws: add chargerAndreas Kemnade
Add charger and battery definition for the Epson Moverio BT-200 to make charging working. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241019111121.331477-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: omap36xx: declare 1GHz OPP as turbo againAndreas Kemnade
Operating stable without reduced chip life at 1Ghz needs several technologies working: The technologies involve - SmartReflex - DVFS As this cannot directly specified in the OPP table as dependecies in the devicetree yet, use the turbo flag again to mark this OPP as something special to have some kind of opt-in. So revert commit 5f1bf7ae8481 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants") Practical reasoning: At least the GTA04A5 (DM3730) has become unstable with that OPP enabled. Furthermore nothing enforces the availability of said technologies, even in the kernel configuration, so allow users to rather opt-in. Cc: Stable@vger.kernel.org Fixes: 5f1bf7ae8481 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241018214727.275162-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: ti/omap: omap3-gta04a5: add BluetoothAndreas Kemnade
The GTA04A5 model has a wl1837 WLAN/Bluetooth combo chip, add it. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241018214842.275194-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: ti/omap: dra7: fix redundant clock divider definitionAndreas Kemnade
Clock specifies ti,dividers as well as ti,max-div. That is in this case redundant and not allowed by schema. Both specify possible dividers of 1 or 2. Remove redundant definition. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410252030.8B2JoTuq-lkp@intel.com/ Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241025164622.431146-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: ti/omap: use standard node name for twl4030 chargerAndreas Kemnade
Use the established node name for the charger. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241016080314.222674-4-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: omap: omap4-epson-embt2ws: add GPIO expanderAndreas Kemnade
Define the GPIO expander which controls at least some camera gpios. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-5-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputsAndreas Kemnade
Set them to the state seen in a running system, initialized by vendor u-boot or kernel. Add line names where they are defined in the vendor kernel. gpio15 resets something in the display, otherwise meaning of the gpios is not known. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-4-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: omap: omap4-epson-embt2ws: wire up regulatorsAndreas Kemnade
Wire up the regulators where usage is plausible. Do not wire them if purpose/usage is unclear like 5V for many things requiring lower voltages. Tested on vendor kernel that backlight definitively does not react on blc_[rl] GPIOs. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-3-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulatorsAndreas Kemnade
To properly have things running after cold boot, define GPIO regulators. Naming is based on board file. In the vendor kernel they are enabled in a function called bt2ws_dcdc_init() if the system is not booted just to charge the battery. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-2-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtboBryan O'Donoghue
Convert the navigation / camera mezzanine from its own dts to a dtso. A small amount of additional includes / address / cell size change needs to be applied to convert. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb5 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-1-cdff2f1a5792@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855Bartosz Golaszewski
Add nodes for the WCN6855 PMU, the WLAN and BT modules and relevant regulators and pin functions to fully describe how the wifi is actually wired on this platform. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-6-8da8310d9564@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855Bartosz Golaszewski
Add a node for the PMU of the WCN6855 and rework the inputs of the wifi and bluetooth nodes to consume the PMU's outputs. With this we can drop the regulator-always-on properties from vreg_s11b and vreg_s12b as they will now be enabled by the power sequencing driver. Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-5-8da8310d9564@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: sc8280xp-crd: enable bluetoothBartosz Golaszewski
Add the bluetooth node for sc8280xp-crd and make it consume the outputs from the PMU as per the new DT bindings contract. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-4-8da8310d9564@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855Bartosz Golaszewski
Add nodes for the WCN6855 PMU, the WLAN module and relevant regulators and pin functions to fully describe how the wifi is actually wired on this platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Co-developed-by: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241018-sc8280xp-pwrseq-v6-3-8da8310d9564@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boardsTengfei Fan
Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The QCS9100 is a variant of the SA8775p, and they are fully compatible with each other. The QCS9100 Ride/Ride Rev3 board is essentially the same as the SA8775p Ride/Ride Rev3 board, with the QCS9100 SoC mounted instead of the SA8775p. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Link: https://lore.kernel.org/r/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3Tengfei Fan
Document qcs9100-ride and qcs9100-ride Rev3 is based on QCS9100 SoC. QCS9100 is a IoT version of SA8775p, hence use the latter's compatible string as fallback. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240911-add_qcs9100_support-v2-3-e43a71ceb017@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbersKonrad Dybcio
Update the numbers based on the information found in the DSDT. Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240716-topic-h_bits-v1-2-f6c5d3ff982c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: x1e80100-crd: describe HID suppliesJohan Hovold
Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VREG_MISC_3P3 is also used for things like the fingerprint reader which are not yet fully described so mark the regulator as always on for now. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241029075258.19642-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variantDmitry Baryshkov
As most other board Miix uses board-id = 0xff, so define calibration variant to distinguish it from other devices with the same chip_id. qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002 Cc: Kalle Valo <kvalo@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240723-miix630-support-v2-5-7d98f6047a17@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: msm8998-clamshell: enable resin/VolDownDmitry Baryshkov
Let resin device generate the VolumeDown key. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240723-miix630-support-v2-4-7d98f6047a17@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp buttonDmitry Baryshkov
Add gpio-keys device, responsible for a single button: Volume Up. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240723-miix630-support-v2-3-7d98f6047a17@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPIDmitry Baryshkov
Enable two other DSP instances on this platofm, aDSP and SLPI. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240723-miix630-support-v2-2-7d98f6047a17@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-29arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreenDmitry Baryshkov
There is no point in keeping touchscreen disabled, enable corresponding i2c-hid device. 04F3:2608 Touchscreen as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input1 04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input2 04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input3 04F3:2608 Stylus as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input4 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240723-miix630-support-v2-1-7d98f6047a17@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-27dt-bindings: arm: samsung: Document Exynos9810 and starlte board bindingMarkuss Broks
Add the compatibles for Exynos9810 SoC and samsung,starlte board to the list of boards. Samsung Galaxy S9 (SM-G960F, codenamed starlte) is a mobile phone, released in 2018. Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20241026-exynos9810-v3-6-b89de9441ea8@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-27dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatibleMarkuss Broks
Add compatible for Samsung Exynos9810 PMU to the schema. Like on other devices, it contains various registers related to power management and other vital to SoC functions. Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20241026-exynos9810-v3-5-b89de9441ea8@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-27dt-bindings: arm: cpus: Add Samsung Mongoose M3Markuss Broks
Add the compatible for Samsung Mongoose M3 CPU core to the schema. Mongoose M3 (codenamed Meerkat) is the big core in Exynos9810 SoC, designed by Samsung. It implements ARMv8.2-A ISA. Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20241026-exynos9810-v3-1-b89de9441ea8@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-26arm64: dts: exynos8895: Add spi_0/1 nodesIvaylo Ivanov
Add nodes for spi_0 (SPI_CAM0) and spi_1 (SPI_CAM1), which allows using them. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Link: https://lore.kernel.org/r/20241023091734.538682-6-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-26arm64: dts: exynos8895: Add Multi Core Timer (MCT) nodeIvaylo Ivanov
MCT has one global timer and 8 CPU local timers. The global timer can generate 4 interrupts, and each local timer can generate an interrupt making 12 interrupts in total. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Link: https://lore.kernel.org/r/20241023091734.538682-4-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-26arm64: dts: exynos8895: Add clock management unit nodesIvaylo Ivanov
Add clock management unit nodes for: - cmu_top, which provides muxes, divs and gates for other CMUs - cmu_peris, which provides clocks for GIC and MCT - cmu_fsys0, which provides clocks for USBDRD30 - cmu_fsys1, which provides clocks for MMC, UFS and PCIE - cmu_peric0, which provides clocks for UART_DBG, USI00 ~ USI03 - cmu_peric1, which provides clocks for SPI_CAM0/1, UART_BT, USI04 ~ USI13 Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Link: https://lore.kernel.org/r/20241023091734.538682-3-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-26dt-bindings: timer: exynos4210-mct: Add samsung,exynos8895-mct compatibleIvaylo Ivanov
Just like most Samsung Exynos SoCs, Exynos8895 uses almost the same Multi-Core Timer block with no functional differences. Add dedicated samsung,exynos8895-mct compatible to the dt-schema for representing the MCT timer of Exynos8895 SoC. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241023091734.538682-2-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-26Merge branch 'for-v6.13/clk-dt-bindings' into next/dt64Krzysztof Kozlowski
2024-10-26dt-bindings: clock: samsung: Add Exynos8895 SoCIvaylo Ivanov
Provide dt-schema documentation for Samsung Exynos8895 SoC clock controller CMU blocks: - CMU_FSYS0/1 - CMU_PERIC0/1 - CMU_PERIS - CMU_TOP Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Link: https://lore.kernel.org/r/20241023090136.537395-2-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-10-25arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-nsDaolong Zhu
Add i2c2's i2c-scl-internal-delay-ns. Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-4-9be1bcaf35e0@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-10-25arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-nsDaolong Zhu
Add i2c2's i2c-scl-internal-delay-ns. Fixes: 52e84f233459 ("arm64: dts: mt8183: Add kukui-jacuzzi-cozmo board") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-3-9be1bcaf35e0@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-10-25arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-nsDaolong Zhu
Add i2c2's i2c-scl-internal-delay-ns. Fixes: dd6e3b06214f ("arm64: dts: mt8183: Add kukui-jacuzzi-burnet board") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-2-9be1bcaf35e0@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-10-25arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-nsDaolong Zhu
Add i2c2's i2c-scl-internal-delay-ns. Fixes: 6cd7fdc8c530 ("arm64: dts: mt8183: Add kukui-jacuzzi-fennel board") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Reviewed-by: Link: https://lore.kernel.org/r/20241025-i2c-delay-v2-1-9be1bcaf35e0@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-10-25dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTCClaudiu Beznea
The RTC and VBATTB don't share the MSTOP control bit (but only the bus clock and the reset signal). As the MSTOP control is modeled though power domains add power domain ID for the RTC device available on the Renesas RZ/G3S SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241019084738.3370489-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-25arm64: dts: renesas: r9a09g057: Add OPP tableLad Prabhakar
Add OPP table for RZ/V2H(P) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241008164935.335043-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-25arm64: dts: rockchip: Add rk3588-orangepi-5b device treeCenk Uluisik
Implements a slightly modified rk3588s-orangepi-5b.dts from the vendor. Unfortunately the &wireless_bluetooth and &wireless_wlan are not implemented yet. Therefore add the sdhci alias to be mmc0 on the rk3588s-orangepi-5b.dts. How is the Orange Pi 5B unique? - the Orange Pi 5b uses combphy0_ps for the WiFi. - the Orange Pi 5B has GPIO0_C5 hooked to BT_WAKE_HOST. - builtin eMMC storage - ap6275p Wifi module (like the Orange Pi 5 Plus) - builtin BlueTooth module Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com> Link: https://lore.kernel.org/r/20241024095038.42079-3-cenk.uluisik@googlemail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25dt-bindings: arm: rockchip: Add Orange Pi 5b enum to Orange Pi 5 entryCenk Uluisik
This extends the Xunlong Orange Pi 5 device tree binding with an enum for the Orange Pi 5b, which is implemented before the device tree. How does this board differ from the original Orange Pi 5? - the Orange Pi 5 has a M.2 NVMe M-key PCI 2.0x1 slot (hooked to combphy0_ps) whereas the Orange Pi 5b uses combphy0_ps for the WiFi. - The Orange Pi 5 with the M.2 socket has a regulator defined hooked to "GPIO0_C5" (i.e. PCIE_PWREN_H) whereas the Orange Pi 5B has GPIO0_C5 hooked to BT_WAKE_HOST. - builtin eMMC storage - no SPI NOR flash (u-boot, preboot etc. initiates from within the eMMC storage) - ap6275p Wifi module (like the Orange Pi 5 Plus) - builtin BlueTooth module Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241024095038.42079-2-cenk.uluisik@googlemail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-09-27 17:10:24 +0000