| Age | Commit message (Collapse) | Author |
|---|
|
The previous coordination type handling in the cppc_cpufreq init code
created some confusion: the comment mentioned "Support only SW_ANY for
now" while only the SW_ALL/ALL case resulted in a failure. The other
coordination types (HW_ALL/HW, NONE) were silently supported.
Clarify support for coordination types while describing in comments the
intended behavior.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Considering only the currently supported coordination types (ANY, HW,
NONE), this change only makes a difference for the ANY type, when
policy->cpu is hotplugged out. In that case the new policy->cpu will
be different from ((struct cppc_cpudata *)policy->driver_data)->cpu.
While in this case the controls of *ANY* CPU could be used to drive
frequency changes, it's more consistent to use policy->cpu as the
leading CPU, as used in all other cppc_cpufreq functions. Additionally,
the debug prints in cppc_set_perf() would no longer create confusion
when referring to a CPU that is hotplugged out.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
For errors parsing the _PSD domains, a separate domain is returned for
each CPU in the failed _PSD domain with no coordination (as per previous
comment). But contrary to the intention, the code was setting
CPUFREQ_SHARED_TYPE_ALL as coordination type.
Change shared_type to CPUFREQ_SHARED_TYPE_NONE in case of errors parsing
the domain information. The function still returns the error and the caller
is free to bail out the domain initialisation altogether in that case.
Given that both functions return domains with a single CPU, this change
does not affect the functionality, but clarifies the intention.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.11-rc1 from Viresh Kumar:
"This contains the following updates:
- Fix imx's NVMEM_IMX_OCOTP dependency (Arnd Bergmann).
- Add support for mt8167 and blacklist mt8516 (Fabien Parent).
- Some ->get() callback related cleanups to the tegra194 driver and
some optimizations in tegra186 driver (Jon Hunter and Sumit Gupta).
- Power scale improvements to arm_scmi driver (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE and MODULE_ALIAS to several drivers
(Pali Rohár).
- Fix error path in mediatek driver (Qinglang Miao).
- Fix memleak in ST's cpufreq driver (Yangtao Li)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
cpufreq: arm_scmi: Discover the power scale in performance protocol
firmware: arm_scmi: Add power_scale_mw_get() interface
cpufreq: tegra194: Rename tegra194_get_speed_common function
cpufreq: tegra194: Remove unnecessary frequency calculation
cpufreq: tegra186: Simplify cluster information lookup
cpufreq: tegra186: Fix sparse 'incorrect type in assignment' warning
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
cpufreq: vexpress-spc: Add missing MODULE_ALIAS
cpufreq: scpi: Add missing MODULE_ALIAS
cpufreq: loongson1: Add missing MODULE_ALIAS
cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
cpufreq: st: Add missing MODULE_DEVICE_TABLE
cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
cpufreq: ap806: Add missing MODULE_DEVICE_TABLE
cpufreq: mediatek: add missing platform_driver_unregister() on error in mtk_cpufreq_driver_init
cpufreq: tegra194: get consistent cpuinfo_cur_freq
cpufreq: blacklist mt8516 in cpufreq-dt-platdev
cpufreq: mediatek: Add support for mt8167
...
|
|
Make cpufreq_online() return negative error codes on all errors that
cause the policy to be destroyed, as appropriate.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix up the remaining kerneldoc comments that don't adhere to the
expected format and clarify some of them a bit.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
local_clock() has better precision and accuracy as compared to jiffies,
lets use it for time management in cpufreq stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rearrange a conditional to make it more straightforward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Avoid doing the same assignment in both branches of a conditional,
do it after the whole conditional instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
|
|
Add mechanism to discover the power scale present in the performance
protocol for all domains. Provide this information to Energy Model,
which then can be checked in other frameworks, e.g. thermal.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add a new interface to the existing perf_ops and export the information
about the power values scale.
This would be used by the cpufreq driver and Energy Model framework to
set the performance domains scale: milli-Watts or abstract scale.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The function tegra194_get_speed_common() uses hardware timers to
calculate the current CPUFREQ and so rename this function to be
tegra194_calculate_speed() to reflect what it does.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Tegra194 CPUFREQ driver sets the CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag which means that the CPUFREQ framework will call the 'get' callback
on boot to determine the current frequency of the CPUs. Therefore, it is
not necessary for the Tegra194 CPUFREQ driver to internally call the
tegra194_get_speed_common() during initialisation to query the current
frequency as well. Fix this by removing the call to the
tegra194_get_speed_common() during initialisation and simplify the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The CPUFREQ driver framework references each individual CPUs when
getting and setting the speed. Tegra186 has 3 clusters of A57 CPUs and
1 cluster of Denver CPUs. Hence, the Tegra186 CPUFREQ driver need to
know which cluster a given CPU belongs to. The logic in the Tegra186
driver can be greatly simplified by storing the cluster ID associated
with each CPU in the tegra186_cpufreq_cpu structure. This allow us to
completely remove the Tegra cluster info structure from the driver and
simplifiy the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Sparse warns that the incorrect type is being assigned to the CPUFREQ
driver_data variable in the Tegra186 CPUFREQ driver. The Tegra186
CPUFREQ driver is assigned a type of 'void __iomem *' to a pointer of
type 'void *' ...
drivers/cpufreq/tegra186-cpufreq.c:72:37: sparse: sparse: incorrect
type in assignment (different address spaces) @@
expected void *driver_data @@ got void [noderef] __iomem * @@
...
drivers/cpufreq/tegra186-cpufreq.c:87:40: sparse: sparse: incorrect
type in initializer (different address spaces) @@
expected void [noderef] __iomem *edvd_reg @@ got void *driver_data @@
The Tegra186 CPUFREQ driver is using the policy->driver_data variable to
store and iomem pointer to a Tegra186 CPU register that is used to set
the clock speed for the CPU. This is not necessary because the register
base address is already stored in the driver data and the offset of the
register for each CPU is static. Therefore, fix this by adding a new
structure with the register offsets for each CPU and store this in the
main driver data structure along with the register base address. Please
note that a new structure has been added for storing the register
offsets rather than a simple array, because this will permit further
clean-ups and simplification of the driver.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes: 2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 47ac9aa165540 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 8def31034d033 ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a0a22cf14472f ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f328584f7bff8 ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: ab0ea257fc58d ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 46e2856b8e188 ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 501c574f4e3a5 ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 6754f556103be ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
mtk_cpufreq_driver_init
Add the missing platform_driver_unregister() before return from
mtk_cpufreq_driver_init in the error handling case when failed
to register mtk-cpufreq platform device
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add compatible string for mediatek mt8167
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use dev_pm_opp_put_prop_name() to avoid mem leak, which free opp_table.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
'shared_cpu_map', stored as part of the per-processor
acpi_processor_performance structre, is used to store CPUs that share
a performance domain. By definition it contains the owning CPU.
While building the 'shared_cpu_map' it is being set twice - once while
initialising the performance domains and again when matching CPUs
belonging to the same domain.
Drop the unnecessary initialisation.
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar:
"This fixes a build issues with SCMI cpufreq driver in the
!CONFIG_COMMON_CLK case."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
|
|
Commit 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a
dummy clock provider") registers a dummy clock provider using
devm_of_clk_add_hw_provider. These *_hw_provider functions are defined
only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig
dependency, but since we plan to move away from the clock dependency
for scmi cpufreq, it is preferrable to avoid that.
Let us just conditionally compile out the offending call to
devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside
of the #ifdef block to avoid build warning.
Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Various functionality / regression fixes for Logitech devices from
Hans de Goede
- Fix for (recently added) GPIO support in mcp2221 driver from Lars
Povlsen
- Power management handling fix/quirk in i2c-hid driver for certain
BIOSes that have strange aproach to power-cycle from Hans de Goede
- a few device ID additions and device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
HID: Add Logitech Dinovo Edge battery quirk
HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
HID: mcp2221: Fix GPIO output handling
HID: hid-sensor-hub: Fix issue with devices with no report ID
HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
HID: add support for Sega Saturn
HID: cypress: Support Varmilo Keyboards' media hotkeys
HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
HID: logitech-hidpp: Add PID for MX Anywhere 2
HID: uclogic: Add ID for Trust Flex Design Tablet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for the x86 perf sysfs interfaces which used kobject
attributes instead of device attributes and therefore making clang's
control flow integrity checker upset"
* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: fix sysfs type mismatches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for lockdep which makes the recursion protection cover
graph lock/unlock"
* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Put graph lock/unlock under lock_recursion protection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded EFI fixes from Ard Biesheuvel:
- fix memory leak in efivarfs driver
- fix HYP mode issue in 32-bit ARM version of the EFI stub when built
in Thumb2 mode
- avoid leaking EFI pgd pages on allocation failure"
* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Free efi_pgd with free_pages()
efivarfs: fix memory leak in efivarfs_create()
efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
same because the proper one is going through the IOMMU tree (Thomas
Gleixner)
- An Intel microcode loader fix to save the correct microcode patch to
apply during resume (Chen Yu)
- A fix to not access user memory of other processes when dumping
opcode bytes (Thomas Gleixner)
* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
x86/dumpstack: Do not try to access user space code of other tasks
x86/microcode/intel: Check patch signature before saving microcode for early loading
iommu/vt-d: Take CONFIG_PCI_ATS into account
|
|
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: mm (madvise, pagemap,
readahead, memcg, userfaultfd), kbuild, and vfs"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix madvise WILLNEED performance problem
libfs: fix error cast of negative value in simple_attr_write()
mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
mm: memcg/slab: fix root memcg vmstats
mm: fix readahead_page_batch for retry entries
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
compiler-clang: remove version check for BPF Tracing
mm/madvise: fix memory leak from process_madvise
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here are some small Staging and IIO driver fixes for 5.10-rc5. They
include:
- IIO fixes for reported regressions and problems
- new device ids for IIO drivers
- new device id for rtl8723bs driver
- staging ralink driver Kconfig dependency fix
- staging mt7621-pci bus resource fix
All of these have been in linux-next all week with no reported issues"
* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
iio: light: fix kconfig dependency bug for VCNL4035
iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
staging: mt7621-pci: avoid to request pci bus resources
iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
counter/ti-eqep: Fix regmap max_register
iio: adc: stm32-adc: fix a regression when using dma and irq
iio: adc: mediatek: fix unset field
iio: cros_ec: Use default frequencies when EC returns invalid information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are some small tty/serial fixes for 5.10-rc5 that resolve some
reported issues:
- speakup crash when telling the kernel to use a device that isn't
really there
- imx serial driver fixes for reported problems
- ar933x_uart driver fix for probe error handling path
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: ar933x_uart: disable clk on error handling path in probe
tty: serial: imx: keep console clocks always on
speakup: Do not let the line discipline be used several times
tty: serial: imx: fix potential deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A final set of miscellaneous bug fixes for ext4"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix bogus warning in ext4_update_dx_flag()
jbd2: fix kernel-doc markups
ext4: drop fast_commit from /proc/mounts
|
|
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.
To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).
When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.
A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes. What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.
This results in something like the following being seen in dmesg:
kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus
showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification. This was causing the cache to be
invalidated for that vnode when it shouldn't have been. If it happens
on a data file, this might lead to local changes being lost.
Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.
Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway. It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.
Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The calculation of the end page index was incorrect, leading to a
regression of 70% when running stress-ng.
With this fix, we instead see a performance improvement of 3%.
Fixes: e6e88712e43b ("mm: optimise madvise WILLNEED")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/20201109134851.29692-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The attr->set() receive a value of u64, but simple_strtoll() is used for
doing the conversion. It will lead to the error cast if user inputs a
negative value.
Use kstrtoull() instead of simple_strtoll() to convert a string got from
the user to an unsigned value. The former will return '-EINVAL' if it
gets a negetive value, but the latter can't handle the situation
correctly. Make 'val' unsigned long long as what kstrtoull() takes,
this will eliminate the compile warning on no 64-bit architectures.
Fixes: f7b88631a897 ("fs/libfs.c: fix simple_attr_write() on 32bit machines")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/1605341356-11872-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
