summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-30staging: dwc2: fix off-by-one in check for max_packet_count parameterMatthijs Kooijman
Previously, the max_packet_count could be set to 1 << x, where x is the number of bits available (width + 4 in the code). Since 1 << x requires x + 1 bits to represent, this will not work. The real maximum value is (1 << x) - 1. This value is already used the default when the set value is invalid, but the upper limit for the set value was off-by-one. This change makes the check the same as the one for max_transfer_size, which was already correct. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: dwc2: remove specific fifo size constantsMatthijs Kooijman
A generic set of FIFOSIZE_* constants is defined which applies to all fifo size and offset registers. It is already used for both the GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well. Some of these also had specific constants defined. This patch removes the specific constants and documents to use the generic constants. Note that the removed constants weren't actually used. Instead, most of the related code uses hardcoded masks and shifts. But given that subsequent patches will be moving that code around and introducing the constants in the process, this patch leaves those untouched. Also note that the GRXFSIZ register also contains a fifo size, but there is no corresponding start address register (it is always the first fifo in memory), the layout of the GRXFSIZ register is different and cannot use the same constants. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ipv4 tunnels: fix an oops when using ipip/sit with IPsecLi Hongjun
Since commit 3d7b46cd20e3 (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30hvc_xen: Remove unnecessary __GFP_ZERO from kzallocJoe Perches
kzalloc already adds this __GFP_ZERO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30serial: imx: initialize the local variableHuang Shijie
The slave_config is not initialized, so some of its fields may be set with random data which may causes the failure in the following dmaengine_prep_slave_sg(). This patch fixes this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30tty: ar933x_uart: add device tree support and binding documentationGabor Juhos
Modify the probe routine to get the port line number from device tree if the 'of_node' is populated in the platform device. The driver can be built as module, thus add an OF specific module device table as well to support module auto loading. This makes it possible to use the driver for AR9330 UART devices specified in device tree. Cc: devicetree@vger.kernel.org Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drm/radeon/dpm: make sure dc performance level limits are valid (CI)Alex Deucher
Check to make sure the dc limits are valid before using them. Some systems may not have a dc limits table. In that case just use the ac limits. This fixes hangs on systems when the power state is changed when on battery (dc) due to invalid performance state parameters. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=68708 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)Alex Deucher
Check to make sure the dc limits are valid before using them. Some systems may not have a dc limits table. In that case just use the ac limits. This fixes hangs on systems when the power state is changed when on battery (dc) due to invalid performance state parameters. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=68708 v2: fix up limits in dpm_init() Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: gcc fixes for extended dpm tablesAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for kb/kv dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for ci dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for si dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for ni dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for trinity dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for sumo dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeonn: gcc fixes for rv7xx/eg/btc dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for rv6xx dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: gcc fixes for radeon_atombios.cAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: enable UVD interrupts on CIKChristian König
The same as on evergreen. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: fix init ordering for r600+Alex Deucher
The vram scratch buffer needs to be initialized before the mc is programmed otherwise we program 0 as the GPU address of the default GPU fault page. In most cases we put vram at zero anyway and reserve a page for the legacy vga buffer so in practice this shouldn't cause any problems, but better to make it correct. Was changed in: 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabledAlex Deucher
Avoid needless uvd reprogramming if uvd powergating is disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-08-30drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_initAlex Deucher
No need to try the ring tests if starting the UVD block failed. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-08-30drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resumeAlex Deucher
For powergating, we just need to re-init the registers, there is no need to restore the uvd BOs. This just adds needless work when powergating uvd for playback while the system is on. We only need to restore the uvd BOs on an actual resume from suspend or when the driver loads. This fixes multi-stream UVD playback on KB systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-08-30radeon kms: fix uninitialised hotplug work usage in r100_irq_process()Sergey Senozhatsky
Commit a01c34f72e7cd2624570818f579b5ab464f93de2 (radeon kms: do not flush uninitialized hotplug work) moved work initialisation phase to the last step of radeon_irq_kms_init(). Meelis Roos reported that this causes problems on his machine because drm_irq_install() uses hotplug work on r100. hotplug work flushed in radeon_irq_kms_fini(), with two possible cases: -- radeon_irq_kms_fini() call after successful radeon_irq_kms_init() -- radeon_irq_kms_fini() call after unsuccessful (or not called at all) radeon_irq_kms_init() The latter one causes flush work on uninitialised hotplug work. Move work initialisation before drm_irq_install(), but keep existing agreement to flush hotplug work in radeon_irq_kms_fini() only for `irq.installed' (successful radeon_irq_kms_init()) case. WARNING: CPU: 0 PID: 243 at kernel/workqueue.c:1378 __queue_work+0x132/0x16d() Call Trace: [<c12319b3>] ? dump_stack+0xa/0x13 [<c1022600>] ? warn_slowpath_common+0x75/0x8a [<c1031010>] ? __queue_work+0x132/0x16d [<c1031010>] ? __queue_work+0x132/0x16d [<c102269e>] ? warn_slowpath_null+0x1b/0x1f [<c1031010>] ? __queue_work+0x132/0x16d [<c103107b>] ? queue_work_on+0x30/0x40 [<f8aed3f3>] ? r100_irq_process+0x16d/0x1e6 [radeon] [<f8ae77cf>] ? radeon_driver_irq_preinstall_kms+0xc2/0xc5 [radeon] [<f8974d77>] ? drm_irq_install+0xb2/0x1ac [drm] [<f897604d>] ? drm_vblank_init+0x196/0x1d2 [drm] [<f8ae78d3>] ? radeon_irq_kms_init+0x33/0xc6 [radeon] [<f8aef35a>] ? r100_startup+0x1a3/0x1d6 [radeon] [<f8ad77c8>] ? radeon_ttm_init+0x26e/0x287 [radeon] [<f8aef752>] ? r100_init+0x2b3/0x309 [radeon] [<c118082e>] ? vga_client_register+0x39/0x40 [<f8ac535f>] ? radeon_device_init+0x54b/0x61b [radeon] [<f8ac40fd>] ? cail_mc_write+0x13/0x13 [radeon] [<f8ac6864>] ? radeon_driver_load_kms+0x82/0xda [radeon] [<f8978bbd>] ? drm_get_pci_dev+0x136/0x22d [drm] [<f8ac409b>] ? radeon_pci_probe+0x6c/0x86 [radeon] [<c112acf6>] ? pci_device_probe+0x4c/0x83 [<c11846c7>] ? driver_probe_device+0x80/0x184 [<c112a848>] ? pci_match_id+0x18/0x36 [<c1184837>] ? __driver_attach+0x44/0x5f [<c11833f4>] ? bus_for_each_dev+0x50/0x5a [<c118433e>] ? driver_attach+0x14/0x16 [<c11847f3>] ? __device_attach+0x28/0x28 [<c1184045>] ? bus_add_driver+0xd6/0x1bf [<c1184c22>] ? driver_register+0x78/0xcf [<f8ba8000>] ? 0xf8ba7fff [<c10003bf>] ? do_one_initcall+0x8b/0x121 [<c101e668>] ? change_page_attr_clear+0x2e/0x33 [<f8ba8000>] ? 0xf8ba7fff [<c101e689>] ? set_memory_ro+0x1c/0x20 [<c104de94>] ? set_page_attributes+0x11/0x12 [<c104f6e1>] ? load_module+0x12fa/0x17e8 [<c107483b>] ? map_vm_area+0x22/0x31 [<c104fc36>] ? SyS_init_module+0x67/0x7d [<c1234245>] ? sysenter_do_call+0x12/0x26 Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/audio: set up the sads on DCE3.2 asicsAlex Deucher
This sets up the short audio descriptors properly on DCE3.2 asics for hdmi audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: fix handling of variable sized arrays for router objectsAlex Deucher
The table has the following format: typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure { UCHAR ucNumberOfSrc; USHORT usSrcObjectID[1]; UCHAR ucNumberOfDst; USHORT usDstObjectID[1]; }ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT; usSrcObjectID[] and usDstObjectID[] are variably sized, so we can't access them directly. Use pointers and update the offset appropriately when accessing the Dst members. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: fix resume on some rs4xx boards (v2)Alex Deucher
Setting MC_MISC_CNTL.GART_INDEX_REG_EN causes hangs on some boards on resume. The systems seem to work fine without touching this bit so leave it as is. v2: read-modify-write the GART_INDEX_REG_EN bit. I suspect the problem is that we are losing the other settings in the register. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=52952 Reported-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Daniel Tobias <dan.g.tob@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: add berlin pci idsAlex Deucher
This adds the pci ids for the berlin GPU core. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: fill in gpu_init for berlin GPU coresAlex Deucher
This fills in the GPU specific details for berlin GPU cores so that the driver will work with them. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/dpm: ungate blocks in dpm disable for kb/kvAlex Deucher
These blocks need to be ungated for the other parts of the driver properly initialize them (e.g., after a gpu reset, etc.). Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/dpm: track uvd gated state for ciAlex Deucher
Track the current uvd gated state on CI to avoid unnecessary state changes when uvd is active. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: enable uvd dpm on CIAlex Deucher
UVD dpm dynamically adjusts the uvd clocks on demand. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: disable the GRPH block when we disable the crtcAlex Deucher
Since we aren't using it when the crtc is disabled, turn it off to save power. The GRPH block is the part of the display controller that controls the primary graphics plane (size, address, etc.). Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: atombios hw i2c fixesAlex Deucher
These fixes make writes work properly. Previously only reads worked. Note that this feature is off by default. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: fix LCD record parsingAlex Deucher
If the LCD table contains an EDID record, properly account for the edid size when walking through the records. This should fix error messages about unknown LCD records. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: check firmware overrides for mclk/sclk ssAlex Deucher
Check the overrides in the firmware info table before enabling spread spectrum on the engine or memory clocks. Some boards may have valid spread spectrum tables, but shouldn't necessarily have it enabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: update line buffer allocation for dce8Alex Deucher
We need to allocate line buffer to each display when setting up the watermarks. Failure to do so can lead to a blank screen. This fixes blank screen problems on dce8 asics. Based on an initial fix from: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: update line buffer allocation for dce6Alex Deucher
We need to allocate line buffer to each display when setting up the watermarks. Failure to do so can lead to a blank screen. This fixes blank screen problems on dce6 asics. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=64850 Based on an initial fix from: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: update line buffer allocation for dce4.1/5Alex Deucher
We need to allocate line buffer to each display when setting up the watermarks. Failure to do so can lead to a blank screen. This fixes blank screen problems on dce4.1/5 asics. Based on an initial fix from: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/si: Add support for CP DMA to CS checker for compute v2Tom Stellard
Also add a new RADEON_INFO query to check that CP DMA packets are supported on the compute ring. CP DMA has been supported since the 3.8 kernel, but due to an oversight we forgot to teach the CS checker that the CP DMA packet was legal for the compute ring on Southern Islands GPUs. This patch fixes a bug where the radeon driver will incorrectly reject a legal CP DMA packet from user space. I would like to have the patch backported to stable so that we don't have to require Mesa users to use a bleeding edge kernel in order to take advantage of this feature which is already present in the stable kernels (3.8 and newer). v2: - Don't bump kms version, so this patch can be backported to stable kernels. Cc: stable@vger.kernel.org Signed-off-by: Tom Stellard <thomas.stellard@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: enable mgcg on CIKAlex Deucher
Now that the CP is no longer reset and cg is properly disabled in when appropriate in the dpm code we can now enable mgcg (medium grained clockgating). Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: handle cg in KB/KV dpm codeAlex Deucher
Clockgating needs to be disabled around certain parts of dpm setup otherwise the smc gets into a bad state and dpm doesn't work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: handle cg in CI dpm codeAlex Deucher
Clockgating needs to be disabled around certain parts of dpm setup otherwise the smc gets into a bad state and dpm doesn't work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/cik: properly set up the clearstate buffer for pg (v2)Alex Deucher
The format of the clearstate buffer used for pg (powergating) changed between NI and SI. This formats it properly for what the hardware expects on SI+. v2: fix addresses Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: fixes for gfx clockgating on CIKAlex Deucher
Clockgating requires signalling between the CP and the RLC to work properly. Resetting the CP block in the CP resume code messed up the internal coordination between the blocks. Removing the reset allows gfx clockgating to work properly. However, when gfx clock gating is enabled, there is a strange interaction with dpm which causes the chip to stay in the high performance level all the time, so leave gfx clockgating disabled for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: restructure cg/pg on cik (v2)Alex Deucher
- use new cg/pg flags for finer grained clock and powergating control - restructure the cg/pg code so it can be called from other components such as dpm v2: fix build breakage from rebase Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: enable DMA pg by defaultAlex Deucher
Enable DMA powergating by default. The DMA engines will be powergated when not in use. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: properly set up the clearstate buffer for pg (v2)Alex Deucher
The format of the clearstate buffer used for pg (powergating) changed between NI and SI. This formats it properly for what the hardware expects on SI. v2: fix addresses Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: enable mgcg on SIAlex Deucher
Now that the CP is no longer reset and cg is properly disabled in when appropriate in the dpm code we can now enable mgcg (medium grained clockgating). Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: handle cg in SI dpm codeAlex Deucher
Clockgating needs to be disabled around certain parts of dpm setup otherwise the smc gets into a bad state and dpm doesn't work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-16 14:44:44 +0000