| Age | Commit message (Collapse) | Author |
|---|
|
There are a few more places modifying the VQ to Ready directly. Let's
consolidate them into resume_vq().
The redundant warnings for resume_vq() errors can also be dropped.
There is one special case that needs to be handled for virtio-vdpa:
the initialized flag must be set to true earlier in setup_vq() so that
resume_vq() doesn't return early.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-18-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of blindly calling suspend/resume_vqs(), make then return error
codes.
To keep compatibility, keep suspending or resuming VQs on error and
return the last error code. The assumption here is that the error code
would be the same.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-17-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Until now resume_vq() was used only for the suspend/resume scenario.
This change also allows calling resume_vq() to bring it from Init to
Ready state (VQ initialization).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-16-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Based on the filled flag, create VQs that are filled or blank.
Blank VQs will be filled in later through VQ modify.
Downstream patches will make use of this to pre-create blank VQs at
vdpa device creation.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-15-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Otherwise, when virtqueues are moved from INIT to READY the latest mkey
will not be set appropriately.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-14-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently rqt_size is initialized during device flag configuration.
That's because it is the earliest moment when device knows if MQ
(multi queue) is on or off.
Shift this configuration earlier to device creation time. This implies
that non-MQ devices will have a larger RQT size. But the configuration
will still be correct.
This is done in preparation for the pre-creation of hardware virtqueues
at device add time. When that change will be added, RQT will be created
at device creation time so it needs to be initialized to its max size.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-13-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The virtqueue size is a pre-requisite for setting up any virtqueue
resources. For the upcoming optimization of creating virtqueues at
device add, the virtqueue size has to be configured.
The queue size check in setup_vq() will always be false. So remove it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-12-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is done in preparation for the pre-creation of hardware virtqueues
at device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-11-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is done in preparation for the pre-creation of hardware virtqueues
at device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-10-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Function is used to set default values, so name it accordingly.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-9-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
The hardware VQ configuration is mirrored by data in struct
mlx5_vdpa_virtqueue . Instead of clearing just a few fields at reset,
fully clear the struct and initialize with the appropriate default
values.
As clear_vqs_ready() is used only during reset, get rid of it.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-8-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The virtio spec says that a vdpa device should start off with one queue
pair. The driver is already compliant.
This patch moves the initialization to device add and reset times. This
is done in preparation for the pre-creation of hardware virtqueues at
device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-7-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Use the dedicated suspend_vqs() function instead.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-6-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
No need to iterate over max number of VQs.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-5-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The check is done inside teardown_vq().
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-4-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Originally, the second loop initialized the CVQ. But (acde3929492b
("vdpa/mlx5: Use consistent RQT size") initialized all the queues in the
first loop, so the second iteration in init_mvqs() is never called
because the first one will iterate up to max_vqs.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-3-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
... by changing the setup_vq_resources() parameter type.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-2-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
setup_driver()/teardown_driver() are a bit vague. These functions are
used for virtqueue resources.
Same for alloc_resources()/teardown_resources(): they represent fixed
resources that are meant to exist during the device lifetime.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-1-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, when the Virtio queue is full, a work item is scheduled
to execute in 1ms that retries adding the request to the queue.
This is a large amount of time on the scale on which a
virtio-fs device can operate. When using a DPU this is around
30-40us baseline without going to a remote server (4k, QD=1).
This patch changes the retrying behavior to immediately filling the
Virtio queue up again when a completion has been received.
This reduces the 99.9th percentile latencies in our tests by
60x and slightly increases the overall throughput, when using a
workload IO depth 2x the size of the Virtio queue and a
DPU-powered virtio-fs device (NVIDIA BlueField DPU).
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-3-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently, when the enqueueing of a request or forget operation fails
with -ENOMEM, the enqueueing is retried after a timeout. This patch
removes this behavior and treats -ENOMEM in these scenarios like any
other error. By bubbling up the error to user space in the case of a
request, and by dropping the operation in case of a forget. This
behavior matches that of the FUSE layer above, and also simplifies the
error handling. The latter will come in handy for upcoming patches that
optimize the retrying of operations in case of -ENOSPC.
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-2-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/vdpa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/ifcvf/ifcvf.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240611-md-drivers-vdpa-v1-1-efaf2de15152@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With ARCH=sh, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_ring.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240702-md-sh-drivers-virtio-v1-1-cf7325ab6ccc@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the allmodconfig 'make w=1' issue:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vhost/vringh.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240516-md-vringh-v1-1-31bf37779a5a@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This commit changes lingshan's email from intel.com
to kernel.org.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240514165125.74802-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
All callers of vhost_get_avail_idx() use smp_rmb() to
order the available ring entry read and avail_idx read.
Make vhost_get_avail_idx() call smp_rmb() itself whenever the avail_idx
is accessed. This way, the callers don't need to worry about the memory
barrier. As a side benefit, we also validate the index on all paths now,
which will hopefully help prevent/catch earlier future bugs.
Note that current code is inconsistent in how the errors are handled.
They are treated as an empty ring in some places, but as non-empty
ring in other places. This patch doesn't attempt to change the existing
behaviour.
No functional change intended.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Message-Id: <20240429232748.642356-1-gshan@redhat.com>
|
|
All the VM events related statistics have dependence on
'CONFIG_VM_EVENT_COUNTERS', separate these events into a function to
make code clean. Then we can remove 'CONFIG_VM_EVENT_COUNTERS' from
'update_balloon_stats'.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
This commit introduces a new vDPA driver specifically designed for
managing the virtio control plane over the vDPA bus for OCTEON DPU
devices. The driver consists of two layers:
1. Octep HW Layer (Octeon Endpoint): Responsible for handling hardware
operations and configurations related to the DPU device.
2. Octep Main Layer: Compliant with the vDPA bus framework, this layer
implements device operations for the vDPA bus. It handles device
probing, bus attachment, vring operations, and other relevant tasks.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240614144659.1776067-1-schalla@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.11
This pull request contains the interconnect changes for the 6.11-rc1 merge
window. It contains just driver changes with the following highlights:
Driver changes:
- New driver for MediaTek MT8183/8195 platforms
- New driver for MSM8953 platforms
- New QoS support for RPMh-based platforms with SC7280 being the
first one to benefit from it.
- Fix incorrect master-id value in qcm2290 driver
- Add missing MODULE_DESCRIPTION in a few drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Fix DT backwards compatibility for QoS
interconnect: qcom: Add MSM8953 driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC
interconnect: qcom: qcm2290: Fix mas_snoc_bimc RPM master ID
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: icc-rpmh: Add QoS configuration support
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: mediatek: remove unneeded semicolon
interconnect: qcom: add missing MODULE_DESCRIPTION() macros
interconnect: imx: add missing MODULE_DESCRIPTION() macros
interconnect: mediatek: Add MediaTek MT8183/8195 EMI Interconnect driver
dt-bindings: interconnect: Add MediaTek EMI Interconnect bindings
|
|
Victus laptops
Fix a platform profile option switch/getter bug on some Omen and Victus
laptops dismissing userspace choice when selecting performance mode in
inadequate conditions (e.g. by being disconnected from the AC power plug)
by
- hooking an ACPI notify handler through the
omen_register_powersource_event_handler method that listens to AC
power source changes (plugging in/out the AC power plug)
- keeping an intermediate active_platform_profile variable that is
set when userspace changes the platform profile setting
- restoring the selected platform profile kept in
active_platform_profile when AC power is plugged back into the
laptop through the power_supply_is_system_supplied call check,
unless if the user decided to alter the platform profile mid-way
Add a dependency to the POWER_SUPPLY subsystem to be able to check for
power_supply_is_system_supplied.
Introduce intermediary functions to leverage platform profile <->
internal thermal profile translation code from platform_profile_omen_set
and callers.
These changes makes the module compliant with the principles defined in
the Platform Profile Selection page of the Kernel documentation on those
kind of laptops; which is to not "(...) let userspace know about any
sub-optimal conditions which are impeding reaching the requested
performance level".
Since the Omen and Victus laptops share the same embedded controller
system, the fix is applicable to both categories of laptops.
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Link: https://lore.kernel.org/r/Zovh22-7B1jI7sfF@alexis-pc
[ij: Made active_platform_profile_lock static]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
call trace:
queued_spin_lock_slowpath+0x100/0x284
do_raw_spin_lock+0x34/0x44
ks8851_start_xmit_spi+0x30/0xb8
ks8851_start_xmit+0x14/0x20
netdev_start_xmit+0x40/0x6c
dev_hard_start_xmit+0x6c/0xbc
sch_direct_xmit+0xa4/0x22c
__qdisc_run+0x138/0x3fc
qdisc_run+0x24/0x3c
net_tx_action+0xf8/0x130
handle_softirqs+0x1ac/0x1f0
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x3c/0x58
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x54/0x9c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
__netif_schedule+0x6c/0x80
netif_tx_wake_queue+0x38/0x48
ks8851_irq+0xb8/0x2c8
irq_thread_fn+0x2c/0x74
irq_thread+0x10c/0x1b0
kthread+0xc8/0xd8
ret_from_fork+0x10/0x20
This issue has not been identified earlier because tests were done on
a device with SMP disabled and so spinlocks were actually NOPs.
Now use spin_(un)lock_bh for TX queue related locking to avoid execution
of softirq work synchronously that would lead to a deadlock.
Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706101337.854474-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove duplicate included header file trace/events/udp.h and the
following warning reported by make includecheck:
trace/events/udp.h is included more than once
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706071132.274352-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the netdev-genl per queue stats API.
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope":"queue"}'
[{'ifindex': 4,
'queue-id': 0,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 266613,
'rx-packets': 3325},
{'ifindex': 4,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes': 142823367,
'tx-packets': 2387}]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240706064324.137574-1-fujita.tomonori@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the Sapphire Rapids and Granite Rapids share the same PMU
name, sapphire_rapids. Because from the kernel’s perspective, GNR is
similar to SPR. The only key difference is that they support different
extra MSRs. The code path and the PMU name are shared.
However, from end users' perspective, they are quite different. Besides
the extra MSRs, GNR has a newer PEBS format, supports Retire Latency,
supports new CPUID enumeration architecture, doesn't required the
load-latency AUX event, has additional TMA Level 1 Architectural Events,
etc. The differences can be enumerated by CPUID or the PERF_CAPABILITIES
MSR. They weren't reflected in the model-specific kernel setup.
But it is worth to have a distinct PMU name for GNR.
Fixes: a6742cb90b56 ("perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL")
Suggested-by: Ahmad Yasin <ahmad.yasin@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-3-kan.liang@linux.intel.com
|
|
A non-0 retire latency can be observed on a Raptorlake which doesn't
support the retire latency feature.
By design, the retire latency shares the PERF_SAMPLE_WEIGHT_STRUCT
sample type with other types of latency. That could avoid adding too
many different sample types to support all kinds of latency. For the
machine which doesn't support some kind of latency, 0 should be
returned.
Perf doesn’t clear/init all the fields of a sample data for the sake
of performance. It expects the later perf_{prepare,output}_sample() to
update the uninitialized field. However, the current implementation
doesn't touch the field of the retire latency if the feature is not
supported. The memory garbage is dumped into the perf data.
Clear the retire latency if the feature is not supported.
Fixes: c87a31093c70 ("perf/x86: Support Retire Latency")
Reported-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-4-kan.liang@linux.intel.com
|
|
The below error is observed on Ice Lake VM.
$ perf stat
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (slots).
/bin/dmesg | grep -i perf may provide additional information.
In a virtualization env, the Topdown metrics and the slots event haven't
been supported yet. The guest CPUID doesn't enumerate them. However, the
current kernel unconditionally exposes the slots event and the Topdown
metrics events to sysfs, which misleads the perf tool and triggers the
error.
Hide the perf-metrics topdown events and the slots event if the
perf-metrics feature is not enumerated.
The big core of a hybrid platform can also supports the perf-metrics
feature. Fix the hybrid platform as well.
Closes: https://lore.kernel.org/lkml/CAM9d7cj8z+ryyzUHR+P1Dcpot2jjW+Qcc4CPQpfafTXN=LEU0Q@mail.gmail.com/
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lkml.kernel.org/r/20240708193336.1192217-2-kan.liang@linux.intel.com
|
|
The perf stat errors out with UNC_CHA_TOR_INSERTS.IA_HIT_CXL_ACC_LOCAL
event.
$perf stat -e uncore_cha_55/event=0x35,umask=0x10c0008101/ -a -- ls
event syntax error: '..0x35,umask=0x10c0008101/'
\___ Bad event or PMU
The definition of the CHA umask is config:8-15,32-55, which is 32bit.
However, the umask of the event is bigger than 32bit.
This is an error in the original uncore spec.
Add a new umask_ext5 for the new CHA umask range.
Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Closes: https://lore.kernel.org/linux-perf-users/alpine.LRH.2.20.2401300733310.11354@Diego/
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708185524.1185505-1-kan.liang@linux.intel.com
|
|
perf_pending_irq() invokes perf_event_wakeup() and __perf_pending_irq().
The former is in charge of waking any tasks which waits to be woken up
while the latter disables perf-events.
The irq_work perf_pending_irq(), while this an irq_work, the callback
is invoked in thread context on PREEMPT_RT. This is needed because all
the waking functions (wake_up_all(), kill_fasync()) acquire sleep locks
which must not be used with disabled interrupts.
Disabling events, as done by __perf_pending_irq(), expects a hardirq
context and disabled interrupts. This requirement is not fulfilled on
PREEMPT_RT.
Split functionality based on perf_event::pending_disable into irq_work
named `pending_disable_irq' and invoke it in hardirq context on
PREEMPT_RT. Rename the split out callback to perf_pending_disable().
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-8-bigeasy@linutronix.de
|
|
perf_pending_task() is invoked in task context and disables preemption
because perf_swevent_get_recursion_context() used to access per-CPU
variables. The other reason is to create a RCU read section while
accessing the perf_event.
The recursion counter is no longer a per-CPU accounter so disabling
preemption is no longer required. The RCU section is needed and must be
created explicit.
Replace the preemption-disable section with a explicit RCU-read section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-7-bigeasy@linutronix.de
|
|
The swevent_htable::recursion counter is used to avoid creating an
swevent while an event is processed to avoid recursion. The counter is
per-CPU and preemption must be disabled to have a stable counter.
perf_pending_task() disables preemption to access the counter and then
signal. This is problematic on PREEMPT_RT because sending a signal uses
a spinlock_t which must not be acquired in atomic on PREEMPT_RT because
it becomes a sleeping lock.
The atomic context can be avoided by moving the counter into the
task_struct. There is a 4 byte hole between futex_state (usually always
on) and the following perf pointer (perf_event_ctxp). After the
recursion lost some weight it fits perfectly.
Move swevent_htable::recursion into task_struct.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-6-bigeasy@linutronix.de
|
|
There are four recursion counter, one for each context. The type of the
counter is `int' but the counter is used as `bool' since it is only
incremented if zero.
The main goal here is to shrink the whole struct into 32bit int which
can later be added task_struct into an existing hole.
Reduce the type of the recursion counter to an unsigned char, keep the
increment/ decrement operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-5-bigeasy@linutronix.de
|
|
A signal is delivered by raising irq_work() which works from any context
including NMI. irq_work() can be delayed if the architecture does not
provide an interrupt vector. In order not to lose a signal, the signal
is injected via task_work during event_sched_out().
Instead going via irq_work, the signal could be added directly via
task_work. The signal is sent to current and can be enqueued on its
return path to userland.
Queue signal via task_work and consider possible NMI context. Remove
perf_event::pending_sigtrap and and use perf_event::pending_work
instead.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-4-bigeasy@linutronix.de
|
|
Adding task_work from NMI context requires the following:
- The kasan_record_aux_stack() is not NMU safe and must be avoided.
- Using TWA_RESUME is NMI safe. If the NMI occurs while the CPU is in
userland then it will continue in userland and not invoke the `work'
callback.
Add TWA_NMI_CURRENT as an additional notify mode. In this mode skip
kasan and use irq_work in hardirq-mode to for needed interrupt. Set
TIF_NOTIFY_RESUME within the irq_work callback due to k[ac]san
instrumentation in test_and_set_bit() which does not look NMI safe in
case of a report.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240704170424.1466941-3-bigeasy@linutronix.de
|
|
Only if perf_event::pending_sigtrap is zero, the irq_work accounted by
increminging perf_event::nr_pending. The member perf_event::pending_addr
might be overwritten by a subsequent event if the signal was not yet
delivered and is expected. The irq_work will not be enqeueued again
because it has a check to be only enqueued once.
Move irq_work_queue() to where the counter is incremented and
perf_event::pending_sigtrap is set to make it more obvious that the
irq_work is scheduled once.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-2-bigeasy@linutronix.de
|
|
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org
|
|
When a task is scheduled out, pending sigtrap deliveries are deferred
to the target task upon resume to userspace via task_work.
However failures while adding an event's callback to the task_work
engine are ignored. And since the last call for events exit happen
after task work is eventually closed, there is a small window during
which pending sigtrap can be queued though ignored, leaking the event
refcount addition such as in the following scenario:
TASK A
-----
do_exit()
exit_task_work(tsk);
<IRQ>
perf_event_overflow()
event->pending_sigtrap = pending_id;
irq_work_queue(&event->pending_irq);
</IRQ>
=========> PREEMPTION: TASK A -> TASK B
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
// FAILS: task work has exited
task_work_add(&event->pending_task)
[...]
<IRQ WORK>
perf_pending_irq()
// early return: event->oncpu = -1
</IRQ WORK>
[...]
=========> TASK B -> TASK A
perf_event_exit_task(tsk)
perf_event_exit_event()
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// leak event due to unexpected refcount == 2
As a result the event is never released while the task exits.
Fix this with appropriate task_work_add()'s error handling.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-4-frederic@kernel.org
|
|
Re-introduce task_work_cancel(), this time to cancel an actual callback
and not *any* callback pointing to a given function. This is going to be
needed for perf events event freeing.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-3-frederic@kernel.org
|
|
A proper task_work_cancel() API that actually cancels a callback and not
*any* callback pointing to a given function is going to be needed for
perf events event freeing. Do the appropriate rename to prepare for
that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-2-frederic@kernel.org
|
|
inlined callers
Apparently despite it being marked inline, the compiler
may not inline __down_write_common() which makes it difficult
to identify the cause of lock contention, as the wchan of the
blocked function will always be listed as __down_write_common().
So add __always_inline annotation to the common function (as
well as the inlined helper callers) to force it to be inlined
so a more useful blocking function will be listed (via wchan).
This mirrors commit 92cc5d00a431 ("locking/rwsem: Add
__always_inline annotation to __down_read_common() and inlined
callers") which did the same for __down_read_common.
I sort of worry that I'm playing wack-a-mole here, and talking
with compiler people, they tell me inline means nothing, which
makes me want to cry a little. So I'm wondering if we need to
replace all the inlines with __always_inline, or remove them
because either we mean something by it, or not.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20240709060831.495366-1-jstultz@google.com
|
|
Convert the Atmel GPIO controller binding document to DT schema format
using json-schema.
The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.
"atmel,at91sam9x5-gpio" and "microchip,sam9x60-gpio" have additional
registers to handle drive-strength, slew-rate, pull-down to drive the
pinmux configs.
The new compatible string "microchip,sam9x7-gpio" is added.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240709092354.191643-5-manikandan.m@microchip.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Merge the pmdomain fixes for v6.10-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
