summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-01drm/exynos/decon5433: remove useless checkAndrzej Hajda
TE IRQ is enabled only in case of sw-trigger, so trigger check is redundant. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill BIT_SUSPENDED flagAndrzej Hajda
Exynos tracked suspend state to prevent touching disabled HW. After fixing disable order in HDMI and moving TE handling to DECON it is not needed anymore - all IRQ handlers and callbacks touching HW are called only with enabled DECON. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill BIT_WIN_UPDATED flagAndrzej Hajda
The flag was used to trigger software update in TE IRQ handler only if framebuffers were replaced. Since TE update is triggered always when VBLANKs are enabled and after framebuffer replacement VBLANKs are always enabled the flag becomes redundant. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill BIT_CLKS_ENABLED flagAndrzej Hajda
The flag was used to check if IRQ handlers can touch HW. Since driver enables IRQs only if hardware is enabled the flag becomes redundant. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill BIT_IRQS_ENABLED flagAndrzej Hajda
Since DECON uses enable_irq/disable_irq to full control IRQs, there is no point in having flags to trace it separately. As a bonus condition for software trigger becomes always true, so it can be removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: move TE handling to DECONAndrzej Hajda
DECON is the only user of TE signal, moving all TE related code to DECON driver allows to precise control of IRQ handlers. This control allows to fix race between IRQ handler and DECON disable code - now it is possible to disable DECON during IRQ handling which can result in kernel crash. Beside race fixing this change allows further code simplification. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01dt-bindings: exynos5433-decon: add TE interrupt bindingAndrzej Hajda
DECON command mode can use hardware trigger where transmission is triggered automatically, or software trigger - where TE interrupt handler should trigger transmission. DECON will use software trigger if TE interrupt is specified. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01dt-bindings: exynos5433-decon: fix interrupts bindingsAndrzej Hajda
DECON requires different interrupts depending on mode of work, which depends on panel it is connected to. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: always do sw-trigger when vblanks enabledAndrzej Hajda
When vblanks are enabled userspace and/or kernel can expect vblank interrupt at declared period of time. To generate vblank interrupt image transfer must be triggered. This patch fixes vblank timeouts in case of sw-trigger mode. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: mixer: document YCbCr magic numbersTobias Jakobi
The output stage of the mixer uses YCbCr for the internal computations, which is the reason that some registers take YCbCr related data as input. In particular this applies to MXR_BG_COLOR{0,1,2} and MXR_CM_COEFF_{Y,CB,CR}. Document the formatting of the data which we write to these registers. While at it, unify wording of comments in the register header. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: mixer: simplify mixer_cfg_rgb_fmt()Tobias Jakobi
Convert if-statements to switch statement. Removes duplicated code. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/dsi: fix bridge_node DT parsingAndrzej Hajda
DSIM uses MIC bridge which is between DECON and DSIM, so the driver should expect bridge node on input side. Fixes: 86418f9 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/hdmi: fix pipeline disable orderAndrzej Hajda
Hardware require that MIXER(crtc) should be disabled prior to HDMI(encoder). It was achieved by disabling crtc from encoder disable callback, bypassing drm core. As a result drm core tried to call vblank related routines on disabled crtc. The patch fixes it by simplifying hdmi_disable routine - now it only cancels hotplug worker. Hardware will be disabled in proper moment during pipe clock disable. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: simplify shadow protect codeAndrzej Hajda
There is no point in protecting only particular windows during update. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill BIT_IRQS_ENABLEDAndrzej Hajda
BIT_IRQS_ENABLED flag duplicates drm_vblank_crtc::refcount, it could be safely removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: kill DECON_UPDATE workaroundAndrzej Hajda
Since fixing CMU code (drm/exynos/decon5433: fix CMU programming) DECON started behave predictable and does not need special care during DECON_UPDATE writes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill mode_set_nofb callbackAndrzej Hajda
All Exynos CRTCs are fully configured by .enable callback. The only users of mode_set_nofb actually did nothing in their callbacks - they immediately returned because devices were in suspend state - mode_set_nofb is always called on disabled device. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill pipe field from drivers contextsAndrzej Hajda
Since possible_crtcs are set by Exynos core helper pipe fields have no raison d'etre. The only place it was used, as a hack, is fimd_clear_channels, to avoid calling drm_crtc_handle_vblank, but DRM core has already other protection mechanism (vblank->enabled), so it could be safely removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: set plane possible_crtcs in exynos_plane_initAndrzej Hajda
All Exynos planes are assigned to exactly one CRTC, it allows to simplify initialization by moving setting of possible_crtcs to exynos_plane_init. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_private::pipeAndrzej Hajda
The field duplicates drm_dev->mode_config.num_crtc. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_crtc::pipeAndrzej Hajda
Since crtc index is stored in drm_crtc pipe field became redundant. The patch beside removing the field simplifies also exynos_drm_crtc_get_pipe_from_type. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos/decon5433: implement frame counterAndrzej Hajda
DECON in Exynos5433 has frame counter, it can be used to implement get_vblank_counter callback. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: simplify completion event handlingAndrzej Hajda
All Exynos CRTC drivers shouldn't fail at referencing vblank events, alternate path is actually dead code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01Merge tag 'exynos-drm-fixes-for-v4.12' of ↵Inki Dae
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next - Fix a regression to description of exynos_drm_crtc - Remove preclose hook of Exynos . This was a exynos change of the patch series[1] merged already. - Fix one dt broken issue - Make sure to release bridge_node of Exynos MIPI-DSI driver. [1] https://lists.freedesktop.org/archives/dri-devel/2017-March/135111.html
2017-06-01drm/hdlcd|mali: Drop drm_vblank_cleanupDaniel Vetter
IRQs are properly shut down, so it almost works as race-free shutdown. Except the irq is stopped after the vblank stuff, so boom anyway. Proper way would be to call drm_atomic_helper_shutdown before any of the kms things gets stopped. So no harm in removing the drm_vblank_cleanup here really. Same story for both hdlcd and mali. v2: Move misplaced malidp hunk to this patch (Liviu). Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-17-daniel.vetter@ffwll.ch
2017-06-01drm/doc: Polish irq helper documentationDaniel Vetter
Pull a (much shorter) overview into drm_irq.c, and instead put the callback documentation into in-line comments in drm_drv.h. v2: Move the include stanzas back to the split-up patch (Stefan). Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531092253.12833-1-daniel.vetter@ffwll.ch
2017-06-01drm: Extract drm_vblank.[hc]Daniel Vetter
drm_irq.c contains both the irq helper library (optional) and the vblank support (optional, but part of the modeset uapi, and doesn't require the use of the irq helpers at all. Split this up for more clarity of the scope of the individual bits. v2: Move misplaced hunks to this patch (Stefan). Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531092146.12528-1-daniel.vetter@ffwll.ch
2017-05-31drm/vc4: Fix comment in vc4_drv.hBoris Brezillon
Fixes a copy&paste error. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1495550187-525-1-git-send-email-boris.brezillon@free-electrons.com
2017-05-31drm/pl111: fix warnings without CONFIG_ARM_AMBAArnd Bergmann
The driver is written in a way to enable compile-testing without CONFIG_ARM_AMBA, but it just causes needless warnings: drivers/gpu/drm/pl111/pl111_drv.c:149:26: error: 'pl111_drm_driver' defined but not used [-Werror=unused-variable] drivers/gpu/drm/pl111/pl111_drv.c:81:12: error: 'pl111_modeset_init' defined but not used [-Werror=unused-function] This unhides the probe/remove functions again and just leaves the driver object as unused when CONFIG_ARM_AMBA is disabled, with a __maybe_unused annotation to shut up the warning. Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170524155020.1777369-1-arnd@arndb.de
2017-05-31drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc()Ville Syrjälä
drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's make it const. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518193837.393-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-05-31drm/arcgpu: Drop drm_vblank_cleanupDaniel Vetter
CRTC don't seem to get shut down in a controlled fashion, but no one bothers to stop interrupts either so this races no matter what. Might as well remove it. A call to drm_atomic_helper_shutdown would be pretty sweet somewhere (and maybe getting rid of the load/unload callbacks while at it). Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-16-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-14-daniel.vetter@ffwll.ch
2017-05-31drm/atmel: Drop drm_vblank_cleanupDaniel Vetter
Again almost correct, but since interrupts are shut down after vblank still a race. Proper cleanup would call drm_atomic_helper_shutdown to make sure this really is safe. v2: Remove misplace malidp hunk (Liviu). Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-18-daniel.vetter@ffwll.ch
2017-05-31drm/imx: Drop drm_vblank_cleanupDaniel Vetter
It's only done in the driver load error path, where vblanks don't need to be quiescent anyway. And that's all drm_vblank_cleanup does, since the core will release the vblank allocations on its own already. So drop it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-24-daniel.vetter@ffwll.ch
2017-05-31drm/meson: Drop drm_vblank_cleanupDaniel Vetter
Again seems just cargo-culted. Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-26-daniel.vetter@ffwll.ch
2017-05-31drm/stm: Drop drm_vblank_cleanupDaniel Vetter
Again seems just cargo-culted. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-32-daniel.vetter@ffwll.ch
2017-05-31drm/sun4i: Drop drm_vblank_cleanupDaniel Vetter
Again seems just cargo-culted ... It's not ordered against any irq/vblank/modeset shutdown. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-33-daniel.vetter@ffwll.ch
2017-05-31drm: better document how to send out the crtc disable eventDaniel Vetter
The kernel doc explained what needs to happen, but not how to most easily accomplish that using the functions. Fix that. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-14-daniel.vetter@ffwll.ch
2017-05-31drm: Use vsnprintf extension %phJoe Perches
Using the extension saves a bit of code. Miscellanea: o Neaten and simplify dump_dp_payload_table o Removed trailing blank space from output $ size drivers/gpu/drm/drm_dp_mst_topology.o.* drivers/gpu/drm/tinydrm/*.o* text data bss dec hex filename 25848 0 16 25864 6508 drivers/gpu/drm/drm_dp_mst_topology.o.new 26091 0 16 26107 65fb drivers/gpu/drm/drm_dp_mst_topology.o.old 3362 2 0 3364 d24 drivers/gpu/drm/tinydrm/mipi-dbi.o.new 3376 2 0 3378 d32 drivers/gpu/drm/tinydrm/mipi-dbi.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/a78a21b5f34947da65473a0b7326922cda51a3be.1496187315.git.joe@perches.com
2017-05-31drm/doc: move printf helpers out of drmP.hDaniel Vetter
And document them lightly. Unfortunately kernel-doc isn't the most awesome for documenting #defines that don't look like functions, it makes functions out of them :-/ Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-2-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-3-daniel.vetter@ffwll.ch
2017-05-31drm/pl111: select DRM_PANELArnd Bergmann
When DRM_PANEL is disabled, we get a link error for pl111: drivers/gpu/built-in.o: In function `pl111_connector_destroy': pl111_connector.c:(.text+0x3487e6): undefined reference to `drm_panel_detach' For some reason this only appears in the latest linux-next although the driver appears to have used the symbol for a few weeks already. The solution however is simple enough, we just need to add a 'select' statement. Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170530092224.1204037-1-arnd@arndb.de
2017-05-30drm/bridge: analogix-anx78xx: Use bridge->mode_valid() callbackJose Abreu
Now that we have a callback to check if bridge supports a given mode we can use it in Analogix bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1d0ed1858ae56c827bd09cc1fa6ff4a05d1530eb.1495720737.git.joabreu@synopsys.com
2017-05-30drm: Use mode_valid() in atomic modesetJose Abreu
This patches makes use of the new mode_valid() callbacks introduced previously to validate the full video pipeline when modesetting. This calls the connector->mode_valid(), encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() so that we can make sure that the mode will be accepted in every components. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes v1->v2: - Removed call to connector->mode_valid (Ville, Daniel) - Changed function name (Ville) - Use for_each_new_connector_in_state (Ville) - Do not validate if connector and mode didn't change (Ville) - Use new helpers to call mode_valid Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/a457d6a69ad07b3936304653c919068c430c0857.1495720737.git.joabreu@synopsys.com
2017-05-30drm: Use new mode_valid() helpers in connector probe helperJose Abreu
This changes the connector probe helper function to use the new encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() helper callbacks to validate the modes. The new callbacks are optional so the behaviour remains the same if they are not implemented. If they are, then the code loops through all the connector's encodersXbridgesXcrtcs and calls the callback. If at least a valid encoderXbridgeXcrtc combination is found which accepts the mode then the function returns MODE_OK. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes v3->v4: - Change function name (Laurent) Changes v2->v3: - Call also bridge->mode_valid (Daniel) Changes v1->v2: - Use new helpers suggested by Ville - Change documentation (Daniel) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/d4e3ba87d822fa92f1b8773e441b9a02af3bde71.1495720737.git.joabreu@synopsys.com
2017-05-30drm: Introduce drm_bridge_mode_valid()Jose Abreu
Introduce a new helper function which calls mode_valid() callback for all bridges in an encoder chain. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/36bd5e054496ad3c9c71f1ffe204f28533f55f1e.1495720737.git.joabreu@synopsys.com
2017-05-30drm: Add drm_{crtc/encoder/connector}_mode_valid()Jose Abreu
Add a new helper to call crtc->mode_valid, connector->mode_valid and encoder->mode_valid callbacks. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Dave Airlie <airlied@linux.ie> Changes v2->v3: - Move helpers to drm_probe_helper.c (Daniel) - Squeeze patches that introduce helpers into a single one (Daniel) Signed-off-by: Jose Abreu <joabreu@synopsys.com> [danvet: Make it compile when CONFIG_DRM_DP_AUX_CHARDEV is selected.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/b55c8bd029da219ff04e39086025c115731a49b1.1495720737.git.joabreu@synopsys.com
2017-05-30Backmerge tag 'v4.12-rc3' into drm-nextDave Airlie
Linux 4.12-rc3 Daniel has requested this for some drm-intel-next work.
2017-05-30Merge tag 'drm-intel-next-2017-05-29' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-next More stuff for 4.13: - skl+ wm fixes from Mahesh Kumar - some refactor and tests for i915_sw_fence (Chris) - tune execlist/scheduler code (Chris) - g4x,g33 gpu reset improvements (Chris, Mika) - guc code cleanup (Michal Wajdeczko, Michał Winiarski) - dp aux backlight improvements (Puthikorn Voravootivat) - buffer based guc/host communication (Michal Wajdeczko) * tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits) drm/i915: Update DRIVER_DATE to 20170529 drm/i915: Keep the forcewake timer alive for 1ms past the most recent use drm/i915/guc: capture GuC logs if FW fails to load drm/i915/guc: Introduce buffer based cmd transport drm/i915/guc: Disable send function on fini drm: Add definition for eDP backlight frequency drm/i915: Drop AUX backlight enable check for backlight control drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU drm/i915: Only GGTT vma may be pinned and prevent shrinking drm/i915: Serialize GTT/Aperture accesses on BXT drm/i915: Convert i915_gem_object_ops->flags values to use BIT() drm/i915/selftests: Silence compiler warning in igt_ctx_exec drm/i915/guc: Skip port assign on first iteration of GuC dequeue drm/i915: Remove misleading comment in request_alloc drm/i915/g33: Improve reset reliability Revert "drm/i915: Restore lost "Initialized i915" welcome message" drm/i915/huc: Update GLK HuC version drm/i915: Check for allocation failure drm/i915/guc: Remove action status and statistics from debugfs drm/i915/g4x: Improve gpu reset reliability ...
2017-05-29drm: Remove drm_device->virtdevDaniel Vetter
This is a leftover from the drm_bus days, where we've had a bus-specific device type for every bus type in drm_device. Except for pci (which we can't remove because dri1 drivers) this is all gone. And the virt driver also doesn't really need it, dev_to_virtio works perfectly fine. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-3-daniel.vetter@ffwll.ch
2017-05-29drm/i915: Update DRIVER_DATE to 20170529Daniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-05-29drm/exynos: clean up description of exynos_drm_crtcInki Dae
This patch removes unnecessary descriptions on exynos_drm_crtc structure and adds one description which specifies what pipe_clk member does. pipe_clk support had been added by below patch without any description, drm/exynos: add support for pipeline clock to the framework Commit-id : f26b9343f582f44ec920474d71b4b2220b1ed9a8 Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit (git 2.34.1) at 2025-10-02 15:58:47 +0000