summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-09ARM: dts: dra7: Add properties to enable PCIe x2 lane modeKishon Vijay Abraham I
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable PCIe x2 lane mode are added here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-09arm64: dts: allwinner: h6: Add Orange Pi 3 DTSOndrej Jirman
Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features: - Allwinner H6 quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB or 2GB LPDDR3 RAM - AXP805 PMIC - AP6256 Wifi/BT 5.0 - USB 2.0 host port (A) - USB 2.0 micro usb, OTG - USB 3.0 Host + 4 port USB hub (GL3510) - Gigabit Ethernet (Realtek RTL8211E phy) - HDMI 2.0 port - soldered eMMC (optional) - 3x LED (one is on the bottom) - microphone - audio jack - PCIe Add basic support for the board. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09dt-bindings: sunxi: Add compatible for OrangePi 3 boardOndrej Jirman
Add new Xunlong Orange Pi 3 board compatible string to the bindings documentation. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pinsChen-Yu Tsai
I2C2 is available on the PE pingroup, on the same pins as the camera sensor interface (CSI) controller's camera control interface pins. This provides an option to use I2C2 instead of that control interface to configure camera sensors. Add a pinctrl node for it. The property /omit-if-no-ref/ is added to keep the device tree blob size down if it is unused. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09dt-bindings: arm: sunxi: Add Beelink GS1 boardClément Péron
Beelink GS1 device-tree has been introduced. Add it to the sunxi yaml documentation. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09arm64: dts: allwinner: h6: Introduce Beelink GS1 boardClément Péron
Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211E - FN-Link 6222B-SRB Wifi/BT - 1x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - S/PDIF Tx - IR receiver - 5V/2A DC power supply Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09dt-bindings: vendor-prefixes: add AZWClément Péron
Shenzhen AZW Technology Co. Ltd. is a manufacturer specialized in Android smart TV boxes, Intel mini PCs and home cloud TV boxes with NAS. Add the vendor prefix for AZW. Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09arm64: dts: allwinner: h6: move MMC pinctrl to dtsiClément Péron
There is only one pinmuxing available for each MMC controller. Move the pinctrl to the SOC Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09ARM: dts: sun8i: tbs-a711: Add support for volume keys inputOndrej Jirman
TBS A711 tablet has volume up/down keys connected to r_lradc. Add support for these keys. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09ARM: dts: sunxi: Add R_LRADC support for A83TZiping Chen
Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC. Now the driver has been modified to support it. Add support for it. Signed-off-by: Ziping Chen <techping.chan@gmail.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-08ARM: OMAP2+: Drop mcspi platform data for omap4Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop uart platform data for dra7Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop gpio platform data for dra7Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop i2c platform data for dra7Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop mmc platform data for dra7Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop uart platform data for omap5Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop gpio platform data for omap5Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop i2c platform data for omap5Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop mmc platform data for omap5Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop uart platform data for am33xx and am43xxTony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop gpio platform data for am33xx and am43xxTony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop i2c platform data for am33xx and am43xxTony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop mmc platform data for am330x and am43xxTony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop uart platform data for omap4Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop gpio platform data for omap4Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop i2c platform data for omap4Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: OMAP2+: Drop mmc platform data for omap4Tony Lindgren
We can now drop legacy platform data one interconnect target module at a time in favor of the device tree based data that has been added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am335x: pocketbeagle: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am335x: boneblack-wireless: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am335x: boneblack-common: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am335x: bone-common: Replaced register offsets with definesChristina Quast
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am33xx: Added AM33XX_PADCONF macroChristina Quast
AM33XX_PADCONF takes three instead of two parameters, to make future changes to #pinctrl-cells easier. For old boards which are not mainlined, we left the AM33XX_IOPAD macro. Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am33xx: Added macros for numeric pinmux addressesChristina Quast
The values are extraced from the "AM335x SitaraTM Processors Technical Reference Manual", Section 9.3.1 CONTROL_MODULE Registers, based on the file autogenerated by TI PinMux. Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-maskJohn Stultz
A undocumented and unimplemented binding got into the hi3660 dtsi, and this switches that binding to the now documented one. Cc: Tanglei Han <hantanglei@huawei.com> Cc: Zhuangluan Su <suzhuangluan@hisilicon.com> Cc: Ryan Grachek <ryan@edited.us> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08arm64: dts: hi3660: Add hisi asp dma deviceYoulin Wang
Add asp-dma device to hi3660 dts Cc: Tanglei Han <hantanglei@huawei.com> Cc: Zhuangluan Su <suzhuangluan@hisilicon.com> Cc: Ryan Grachek <ryan@edited.us> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Youlin Wang <wwx575822@notesmail.huawei.com> Signed-off-by: Tanglei Han <hantanglei@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08arm64: dts: hi3660: Add dma to uart nodesJohn Stultz
Try to add DMA support to the uart nodes following the assignments made in the dts from the victoria vendor kernel here: https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1 Cc: Tanglei Han <hantanglei@huawei.com> Cc: Zhuangluan Su <suzhuangluan@hisilicon.com> Cc: Ryan Grachek <ryan@edited.us> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08arm64: dts: hisilicon: hikey970: Add SD and WiFi supportManivannan Sadhasivam
Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to the absence of the PMIC driver, fixed regulators are sourced to make the driver working. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08arm64: dts: hisilicon: hi3670: Add MMC controller supportManivannan Sadhasivam
Add MMC controller support for HiSilicon HI3670 SoC reusing the HI3660 Designware MMC driver. There are 2 DWMMC controllers present in this SoC: 1. DWMMC1 is used for SD card (SD) 2. DWMMC2 is used for WiFi (SDIO) Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08dt-bindings: mmc: Add HI3670 MMC controller bindingManivannan Sadhasivam
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same K3 specific designware driver is reused for HI3670 SoC and the binding is documented with fallback approach for compatible property. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08arm64: dts: hisilicon: hi3670: Add reset controller supportManivannan Sadhasivam
Add reset controller support for HiSilicon HI3670 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08dt-bindings: reset: Add HI3670 reset controller bindingManivannan Sadhasivam
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same driver is reused for HI3670 SoC and the binding is documented here which uses the fallback approach. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08ARM: dts: sunxi: Improve A33 NAND transfers by using DMAMiquel Raynal
In the current state, A33 NAND controllers use PIO during transfers. Throughput can be increased thanks to the use of DMA (mostly during reads, because of the ECC pipelining feature). Besides the usual addition of DMA DT properties, because the A33 NAND DMA handling is different than for older SoCs, we must also update the compatible which has recently been introduced for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-05Documentation: bus: ti-sysc: fix spelling mistakes "multipe" and "interconnet"Colin Ian King
There is are a couple of spelling mistakes in the Documentation. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05bus: ti-sysc: Detect DMIC for debuggingTony Lindgren
Detect DMIC to see what we have connected if config DEBUG is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05bus: ti-sysc: Handle swsup idle mode quirksTony Lindgren
In preparation of dropping interconnect target module platform data in favor of devicetree based data, we must pass swsup idle quirks to the platform data functions. For now, let's only tag the UART modules with the SWSUP_SIDLE_ACT quirk. The other modules will get tagged with swsup quirks as we drop the platform data and test the changes. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05bus: ti-sysc: Pass clockactivity quirk to platform functionsTony Lindgren
We already have the clockactivity quirk set for some modules like i2c, timers and smartreflex. But we're not passing it to the platform functions yet. Let's start doing that in preparation of dropping interconnect target module platform data in favor of device tree based data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGADinh Nguyen
Add the initial device tree files for Intel's Agilex SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-04-05ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)Ondrej Jirman
TBS A711 tablet contains u-blox NEO-6M module connected to UART2. Enable UART2 to gain access to the module from userspace. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-05arm64: dts: allwinner: h6: Add device node for SIDYangtao Li
The device tree binding already lists compatible strings for H6 SoC, so add a device node for it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-05ARM: dts: aspeed: Add RTC nodeJoel Stanley
The ASPEED ast2400 and ast2500 both contain an on board RTC device. Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit (git 2.34.1) at 2025-09-11 11:06:47 +0000