summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-30Merge branch 'acpi-enumeration'Rafael J. Wysocki
* acpi-enumeration: spi / ACPI: add ACPI enumeration support gpio / ACPI: add ACPI support
2012-11-30spi / ACPI: add ACPI enumeration supportMika Westerberg
ACPI 5 introduced SPISerialBus resource that allows us to enumerate and configure the SPI slave devices behind the SPI controller. This patch adds support for this to the SPI core. In addition we bind ACPI nodes to SPI devices. This makes it possible for the slave drivers to get the ACPI handle for further configuration. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30gpio / ACPI: add ACPI supportMathias Nyman
Add support for translating ACPI GPIO pin numbers to Linux GPIO API pins. Needs a gpio controller driver with the acpi handler hook set. Drivers can use acpi_get_gpio() to translate ACPI5 GpioIO and GpioInt resources to Linux GPIO's. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30gpio/pl061: remove old commentBaruch Siach
Since 3ab524754 (gpio: pl061: convert to use generic irq chip) we only have one spinlock in struct pl061_gpio. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-30ALSA: hda - Pass errors properly in alc_auto_check_switches()Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-30Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes"Randy Dunlap
ERROR: "allnodes" [drivers/w1/masters/w1-gpio.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [grant.likely: allnodes is too generic; rename to of_allnodes] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ville Syrjala <syrjala@sci.fi>
2012-11-30ALSA: hda - Refactor alc_kcontrol_new() usagesTakashi Iwai
Allocate the name string and assign the structure in alc_kcontrol_new() itself to reduce the code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-30ALSA: hda - Use standard sort function in hda_auto_parser.cTakashi Iwai
Just refactoring, no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-30batman-adv: use ETH_P_BATMANAntonio Quartulli
The ETH_P_BATMAN ethertype is now defined kernel-wide. Use it instead of the private BATADV_ETH_P_BATMAN define. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-30irqdomain: stop screaming about preallocated irqdescsLinus Walleij
In the simple irqdomain: don't shout warnings to the user, there is no point. An informational print is sufficient. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29ARM: omap: fix typo on timer cleanupOlof Johansson
Fix 32 vs 32k typo: arch/arm/mach-omap2/timer.c: In function 'omap4_local_timer_init': arch/arm/mach-omap2/timer.c:633:2: error: implicit declaration of function 'omap4_sync32_timer_init' [-Werror=implicit-function-declaration] arch/arm/mach-omap2/timer.c: At top level: arch/arm/mach-omap2/timer.c:610:2: warning: 'omap4_sync32k_timer_init' defined but not used [-Wunused-function] Also, mark the omap4_local_timer_init() stub as __init (and take off the explicit inline and let the compiler do the work instead). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Igor Grinberg <grinberg@compulab.co.il>
2012-11-29Merge tag 'omap-for-v3.8/devel-prcm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2 From Tony Lindgren: omap prcm changes via Paul Walmsley <paul@pwsan.com>: Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM change needed for one of the hwmod patches to function. Basic test logs for this branch on top of Tony's omap-for-v3.8/clock branch at commit 558a0780b0a04862a678f7823215424b4e5501f9 are here: http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/ However, omap-for-v3.8/clock at 558a0780 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/ which indicate that the series tests cleanly. * tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits) ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP44xx: clock: drop obsolete clock data ARM: OMAP4: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: hwmod: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: clock: Switch to COMMON clk ARM: OMAP2: clock: Add 24xx data using common struct clk ARM: OMAP3: clock: Add 3xxx data using common struct clk ARM: AM33XX: clock: add clock data in common clock format ARM: OMAP4: clock: Add 44xx data using common struct clk ARM: OMAP2+: clock: add OMAP CCF convenience macros to mach-omap2/clock.h ... Some context conflicts due to nearby changes resolved in arch/arm/mach-omap2/io.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-29Merge branch 'next/dt' into next/pm2Olof Johansson
By Lee Jones (42) and others via Olof Johansson (13) and others * next/dt: (249 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
2012-11-29Merge branch 'next/cleanup' into next/pm2Olof Johansson
By Tony Lindgren (36) and others via Tony Lindgren (22) and others * next/cleanup: (303 commits) ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ARM: integrator: hook the CP into the SoC bus ARM: integrator: hook the AP into the SoC bus ARM: OMAP2+: Fix compiler warning for 32k timer ...
2012-11-29Merge tag 'omap-for-v3.8/cleanup-timer-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Timer clean-up to get us closer to moving timer code to drivers, and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board or devicetree provided timer configuration. Note that these changes are on top of the recent timer fixes. By Jon Hunter (32) and others via Tony Lindgren * tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits) ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: OMAP2+: Fix compiler warning for 32k timer ARM: OMAP: Remove unnecessary inclusion of dmtimer.h ARM: OMAP: Add platform data header for DMTIMERs ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration ARM: OMAP2+: Remove unnecessary local variable in timer code ARM: OMAP: Don't store timers physical address ARM: OMAP: Define omap_dm_timer_prepare function as static ARM: OMAP: Clean-up dmtimer reset code ARM: OMAP: Remove __omap_dm_timer_set_source function ARM: OMAP: Remove unnecessary call to clk_get() ARM: OMAP: Add dmtimer interrupt disable function ARM: OMAP: Fix spurious interrupts when using timer match feature ARM: OMAP: Don't restore DMTIMER interrupt status register ARM: OMAP: Don't restore of DMTIMER TISTAT register ARM: OMAP: Fix dmtimer reset for timer1 ARM: OMAP2+: Don't use __omap_dm_timer_reset() ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations ... Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-29fix off-by-one in argument passed by iterate_fd() to callbacksAl Viro
Noticed by Pavel Roskin; the thing in his patch I disagree with was compensating for that shite in callbacks instead of fixing it once in the iterator itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29lookup_one_len: don't accept . and ..Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29cifs: get rid of blind d_drop() in readdirAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29nfs_lookup_revalidate(): fix a leakAl Viro
We are leaking fattr and fhandle if we decide that dentry is not to be invalidated, after all (e.g. happens to be a mountpoint). Just free both before that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29don't do blind d_drop() in nfs_prime_dcache()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29staging: gdm72xx: unlock on error in init_usb()Dan Carpenter
We recently added locking here and there was an error path which is missing an unlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: panel: pass correct lengths to keypad_send_key()Dan Carpenter
We changed the sizeof() statements in 429ccf058b "staging:panel: Fixed coding conventions." so that they could fit inside the 80 character line limit. Unfortunately, the new sizeof() statements are a smaller size. This reverts it. There isn't a nice way to stay within the 80 character limit without a re-work so I've gone over. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()Wei Yongjun
The dereference to 'state' should be moved below the NULL test. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: fix interrupt supportH Hartley Sweeten
This board supports two interrupt sources: VCC : detects when the external supply voltage drops below 5V CC : over temperature diagnostic Currently the interrupt support is tied into the digital output subdevice. It's also broken since it does not follow the comedi API. Create a new digital input subdevice to handle the interrupts. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()H Hartley Sweeten
For aesthetic reasons, move this function. This function has nothing to do with the digital outputs. It's used to enable the interrupt sources that the board can generate. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove the timer s->range_tableH Hartley Sweeten
The timer subdevice does not have a digital range. Its range of 0 to 0xff is the value used to set the reload timer. Remove the setting of s->range_table. The comedi core will then set it to range_unknown. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: cleanup the subdevice initH Hartley Sweeten
For aesthetic reasons, add some whitespace to the subdevice init. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: fix the watchdog timer subdeviceH Hartley Sweeten
The watchdog timer on this board functions exactly like the one on the apci_1516 board. Fix the i_APCI2032_StartStopWriteWatchdog and i_APCI2032_ConfigWatchdo functions so that the watchdog follows the comedi API. Rename the CamelCase function i_APCI2032_StartStopWriteWatchdog to apci2032_wdog_insn_writ. This function is used to "ping" the watchdog. Rename the CamelCase function i_APCI2032_ConfigWatchdog to apci2032_wdog_insn_config. This function is used to enable/disable the watchdog and set the timeout. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove need for addi-data/addi_common.hH Hartley Sweeten
Only the ADDIDATA_ENABLE define is used from this header. Just open-code the value to remove the dependency and remove the include. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove use of struct addi_privateH Hartley Sweeten
The only data in addi_private used in this driver is: tsk_Current - used with send_sig to signal userspace when an interrupt has occurred. Interrupt support in this driver does not follow the standard comedi API so this functionality is currently broken. This will be addressed. b_OutputMemoryStatus - used in the addi-data "common" code to enable reading of the eeprom. Eeprom support is not needed by this driver and has been removed. Since this data is not needed, remove the use of struct addi_private. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: fix i_APCI2032_ReadWatchdog()H Hartley Sweeten
This function is used by the watchdog subdevice to read the status of the watchdog. Rename the CamelCase function to apci2032_wdog_insn_read and fix the function to return the status value insn->n times like the comedi core expects. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: cleanup register map definesH Hartley Sweeten
Cleanup the defines a bit and add the missing information for the bits in the registers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: merge in hwdrv_apci2032.cH Hartley Sweeten
Merge the code from hwdrv_apci2032.c into the driver and delete the now unused file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: cleanup the s->subdev_flagsH Hartley Sweeten
The flags SDF_GROUND and SDF_COMMON only have meaning for analog input/output subdevices. Remove these flags from the digital output and timer subdevices in this driver. The digital output subdevice does not need the SDF_READABLE flag. Remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove boardinfoH Hartley Sweeten
This driver only supports a single board type. Remove the boardinfo and just use the information directly where used. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: only allocate needed subdevicesH Hartley Sweeten
The addi-data "common" code always allocated 7 subdevices. This driver only requires 2. Change the allocation and remove the unused subdevices. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove use of devpriv->s_EeParametersH Hartley Sweeten
This driver no longer reads the eeprom to find the board specific data, all the necessary data is in the boardinfo. Use the boardinfo directly instead of passing through devpriv->s_EeParameters. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: don't read the unused PCI barsH Hartley Sweeten
This driver only uses PCI bar 1 (dev->iobase), doon't bother reading the unused PCI bars. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove devpriv->iobase usageH Hartley Sweeten
The iobase address stored in devpriv->iobase is also stored in dev->iobase. Use that instead. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove unnecessary info from boardinfoH Hartley Sweeten
The i_IorangeBase[012], i_PCIEeprom, and pc_EepromChip data in the boardinfo was only needed to work out the usage of the PCI bars. This is no longer needed so remove the data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: simplify the PCI bar readingH Hartley Sweeten
The board supported by this driver has a 93c76 eeprom. Knowing this information allows simplifying the code that reads the PCI bars to get the iobase address. Also, since the 'dw_AiBase' is not ioremap'ed we can remove the iounmap in the detach. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: absorb i_APCI2032_Reset()H Hartley Sweeten
This is the only 'reset' function used by the driver, remove it from the boardinfo and absorb the code from hwdrv_apci2032.c into the driver. Rename the CamelCase function i_ADDI_Reset() to apci2032_reset(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove unnecessary includeH Hartley Sweeten
This include is no longer needed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: remove eeprom support codeH Hartley Sweeten
Reading the eeprom on the board supported by this driver is not necessary. All the information required is in the boardinfo. Remove the eeprom support code since it's not really interesting or useful. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: board does not have analog inputsH Hartley Sweeten
The board supported by this driver does not have analog inputs. Remove the subdevice init for it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: board does not have analog outputsH Hartley Sweeten
The board supported by this driver does not have analog outputs. Remove the subdevice init for it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: board does not have digital inputsH Hartley Sweeten
The board supported by this driver does not have digital inputs. Remove the subdevice init for it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: board does not have ttl i/oH Hartley Sweeten
The board supported by this driver does not have ttl i/o. Remove the subdevice init for it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29staging: comedi: addi_apci_2032: separate from addi_common.cH Hartley Sweeten
This driver is for a simple 32 channel digital output board. Using the addi-data "common" code introduces a lot of bloat. Copy the code in addi_common.c to this driver and remove the #include that caused addi_common.c to be compiled with this driver. This will allow removing the bloat. Rename the attach_pci and detach functions so they have namespace associated with this driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29blkdev_max_block: make private to fs/buffer.cLinus Torvalds
We really don't want to look at the block size for the raw block device accesses in fs/block-dev.c, because it may be changing from under us. So get rid of the max_block logic entirely, since the caller should already have done it anyway. That leaves the only user of this function in fs/buffer.c, so move the whole function there and make it static. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-20 04:01:08 +0000