| Age | Commit message (Collapse) | Author |
|---|
|
Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.
Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.
Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.
Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Subbaraya Sundeep says:
====================
Octeontx2 minor tc fixes
This patch set fixes two problems found in tc code
wrt to ratelimiting and when installing UDP/TCP filters.
Patch 1: CN10K has different register format compared to
CN9xx hence fixes that.
Patch 2: Check flow mask also before installing a src/dst
port filter, otherwise installing for one port installs for other one too.
====================
Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.
Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.
Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.
Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit 27b3a5c51b50 ("kill-the-bkl/reiserfs: drop the fs race
watchdog from _get_block_create_0()"), which removed a label that may
have the pointer 'p' touched in its control flow, related if statements
now eval to constant value now. Just remove them.
Assigning value NULL to p here
293 char *p = NULL;
In the following conditional expression, the value of p is always NULL,
As a result, the kunmap() cannot be executed.
308 if (p)
309 kunmap(bh_result->b_page);
355 if (p)
356 kunmap(bh_result->b_page);
366 if (p)
367 kunmap(bh_result->b_page);
Also, the kmap() cannot be executed.
399 if (!p)
400 p = (char *)kmap(bh_result->b_page);
[JK: Removed unnecessary initialization of 'p' to NULL]
Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220720083029.1065578-1-zengjx95@gmail.com
|
|
The previous commit fixed a bug in the bpf_skb_set_tunnel_key helper to
avoid dropping packets whose outer source IP address isn't assigned to a
host interface. This commit changes the corresponding selftest to not
assign the outer source IP address to an interface.
Not assigning the source IP to an interface causes two issues in the
existing test:
1. The ARP requests will fail for that IP address so we need to add the
ARP entry manually.
2. The encapsulated ICMP echo reply traffic will not reach the VXLAN
device. It will be dropped by the stack before, because the
outer destination IP is unknown.
To solve 2., we have two choices. Either we perform decapsulation
ourselves in a BPF program attached at veth1 (the base device for the
VXLAN device), or we switch the outer destination address when we
receive the packet at veth1, such that the stack properly demultiplexes
it to the VXLAN device afterward.
This commit implements the second approach, where we switch the outer
destination address from the unassigned IP address to the assigned one,
only for VXLAN traffic ingressing veth1.
Then, at the vxlan device, the BPF program that checks the output of
bpf_skb_get_tunnel_key needs to be updated as the expected local IP
address is now the unassigned one.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4addde76eaf3477a58975bef15ed2788c44e5f55.1658759380.git.paul@isovalent.com
|
|
Commit 26101f5ab6bd ("bpf: Add source ip in "struct bpf_tunnel_key"")
added support for getting and setting the outer source IP of encapsulated
packets via the bpf_skb_{get,set}_tunnel_key BPF helper. This change
allows BPF programs to set any IP address as the source, including for
example the IP address of a container running on the same host.
In that last case, however, the encapsulated packets are dropped when
looking up the route because the source IP address isn't assigned to any
interface on the host. To avoid this, we need to set the
FLOWI_FLAG_ANYSRC flag.
Fixes: 26101f5ab6bd ("bpf: Add source ip in "struct bpf_tunnel_key"")
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/76873d384e21288abe5767551a0799ac93ec07fb.1658759380.git.paul@isovalent.com
|
|
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in the subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
|
|
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in a subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com
|
|
This commit extends the ip_tunnel_key struct with a new field for the
flow flags, to pass them to the route lookups. This new field will be
populated and used in subsequent commits.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/f8bfd4983bd06685a59b1e3ba76ca27496f51ef3.1658759380.git.paul@isovalent.com
|
|
Delete the redundant word 'in'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220724075207.21080-1-wangjianli@cdjrlc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Delete the redundant word 'in'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220724074746.19550-1-wangjianli@cdjrlc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dumps the pKVM hypervisor backtrace from EL1 by reading the unwinded
addresses from the shared stacktrace buffer.
The nVHE hyp backtrace is dumped on hyp_panic(), before panicking the
host.
[ 111.623091] kvm [367]: nVHE call trace:
[ 111.623215] kvm [367]: [<ffff8000090a6570>] __kvm_nvhe_hyp_panic+0xac/0xf8
[ 111.623448] kvm [367]: [<ffff8000090a65cc>] __kvm_nvhe_hyp_panic_bad_stack+0x10/0x10
[ 111.623642] kvm [367]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
. . .
[ 111.640366] kvm [367]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
[ 111.640467] kvm [367]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
[ 111.640574] kvm [367]: [<ffff8000090a5de4>] __kvm_nvhe___kvm_vcpu_run+0x30/0x40c
[ 111.640676] kvm [367]: [<ffff8000090a8b64>] __kvm_nvhe_handle___kvm_vcpu_run+0x30/0x48
[ 111.640778] kvm [367]: [<ffff8000090a88b8>] __kvm_nvhe_handle_trap+0xc4/0x128
[ 111.640880] kvm [367]: [<ffff8000090a7864>] __kvm_nvhe___host_exit+0x64/0x64
[ 111.640996] kvm [367]: ---[ end nVHE call trace ]---
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-18-kaleshsingh@google.com
|
|
Implements the common framework necessary for unwind() to work in
the protected nVHE context:
- on_accessible_stack()
- on_overflow_stack()
- unwind_next()
Protected nVHE unwind() is used to unwind and save the hyp stack
addresses to the shared stacktrace buffer. The host reads the
entries in this buffer, symbolizes and dumps the stacktrace (later
patch in the series).
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-17-kaleshsingh@google.com
|
|
In protected nVHE mode, the host cannot access private owned hypervisor
memory. Also the hypervisor aims to remains simple to reduce the attack
surface and does not provide any printk support.
For the above reasons, the approach taken to provide hypervisor stacktraces
in protected mode is:
1) Unwind and save the hyp stack addresses in EL2 to a shared buffer
with the host (done in this patch).
2) Delegate the dumping and symbolization of the addresses to the
host in EL1 (later patch in the series).
On hyp_panic(), the hypervisor prepares the stacktrace before returning to
the host.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-16-kaleshsingh@google.com
|
|
Add some stub implementations of protected nVHE stack unwinder, for
building. These are implemented later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-15-kaleshsingh@google.com
|
|
In protected nVHE mode the host cannot directly access
hypervisor memory, so we will dump the hypervisor stacktrace
to a shared buffer with the host.
The minimum size for the buffer required, assuming the min frame
size of [x29, x30] (2 * sizeof(long)), is half the combined size of
the hypervisor and overflow stacks plus an additional entry to
delimit the end of the stacktrace.
The stacktrace buffers are used later in the series to dump the
nVHE hypervisor stacktrace when using protected-mode.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-14-kaleshsingh@google.com
|
|
This can be used to disable stacktrace for the protected KVM
nVHE hypervisor, in order to save on the associated memory usage.
This option is disabled by default, since protected KVM is not widely
used on platforms other than Android currently.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-13-kaleshsingh@google.com
|
|
In non-protected nVHE mode, unwinds and dumps the hypervisor backtrace
from EL1. This is possible beacause the host can directly access the
hypervisor stack pages in non-protected mode.
The nVHE backtrace is dumped on hyp_panic(), before panicking the host.
[ 101.498183] kvm [377]: nVHE call trace:
[ 101.498363] kvm [377]: [<ffff8000090a6570>] __kvm_nvhe_hyp_panic+0xac/0xf8
[ 101.499045] kvm [377]: [<ffff8000090a65cc>] __kvm_nvhe_hyp_panic_bad_stack+0x10/0x10
[ 101.499498] kvm [377]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
. . .
[ 101.524929] kvm [377]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
[ 101.525062] kvm [377]: [<ffff8000090a61e4>] __kvm_nvhe_recursive_death+0x24/0x34
[ 101.525195] kvm [377]: [<ffff8000090a5de4>] __kvm_nvhe___kvm_vcpu_run+0x30/0x40c
[ 101.525333] kvm [377]: [<ffff8000090a8b64>] __kvm_nvhe_handle___kvm_vcpu_run+0x30/0x48
[ 101.525468] kvm [377]: [<ffff8000090a88b8>] __kvm_nvhe_handle_trap+0xc4/0x128
[ 101.525602] kvm [377]: [<ffff8000090a7864>] __kvm_nvhe___host_exit+0x64/0x64
[ 101.525745] kvm [377]: ---[ end nVHE call trace ]---
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-12-kaleshsingh@google.com
|
|
Implements the common framework necessary for unwind() to work
for non-protected nVHE mode:
- on_accessible_stack()
- on_overflow_stack()
- unwind_next()
Non-protected nVHE unwind() is used to unwind and dump the hypervisor
stacktrace by the host in EL1
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-11-kaleshsingh@google.com
|
|
In non-protected nVHE mode (non-pKVM) the host can directly access
hypervisor memory; and unwinding of the hypervisor stacktrace is
done from EL1 to save on memory for shared buffers.
To unwind the hypervisor stack from EL1 the host needs to know the
starting point for the unwind and information that will allow it to
translate hypervisor stack addresses to the corresponding kernel
addresses. This patch sets up this book keeping. It is made use of
later in the series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-10-kaleshsingh@google.com
|
|
Add stub implementations of non-protected nVHE stack unwinder, for
building. These are implemented later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-9-kaleshsingh@google.com
|
|
On hyp stack overflow switch to 16-byte aligned secondary stack.
This provides us stack space to better handle overflows; and is
used in a subsequent patch to dump the hypervisor stacktrace.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-8-kaleshsingh@google.com
|
|
Add brief description on how to use stacktrace/common.h to implement
a stack unwinder.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-7-kaleshsingh@google.com
|
|
Move unwind() to stacktrace/common.h, and as a result
the kernel unwind_next() to asm/stacktrace.h. This allow
reusing unwind() in the implementation of the nVHE HYP
stack unwinder, later in the series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-6-kaleshsingh@google.com
|
|
The unwinder code is made reusable so that it can be used to
unwind various types of stacks. One usecase is unwinding the
nVHE hyp stack from the host (EL1) in non-protected mode. This
means that the unwinder must be able to translate HYP stack
addresses to kernel addresses.
Add a callback (stack_trace_translate_fp_fn) to allow specifying
the translation function.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-5-kaleshsingh@google.com
|
|
Move common unwind_next logic to stacktrace/common.h. This allows
reusing the code in the implementation the nVHE hypervisor stack
unwinder, later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-4-kaleshsingh@google.com
|
|
Move common on_accessible_stack checks to stacktrace/common.h. This is
used in the implementation of the nVHE hypervisor unwinder later in
this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-3-kaleshsingh@google.com
|
|
In order to reuse the arm64 stack unwinding logic for the nVHE
hypervisor stack, move the common code to a shared header
(arch/arm64/include/asm/stacktrace/common.h).
The nVHE hypervisor cannot safely link against kernel code, so we
make use of the shared header to avoid duplicated logic later in
this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-2-kaleshsingh@google.com
|
|
DRV_VERSION is a leftover from when the driver was an out of tree
module. The driver version was never incremented despite of the
numerous changes made since it was mainstreamed. Keeping an
unmaintained driver version number makes no sense. Remove it and rely
on the kernel version instead.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ES58X_MODULE_NAME is set to "etas_es58x". KBUILD_MODNAME also
evaluates to "etas_es58x". Get rid of ES58X_MODULE_NAME and rely on
KBUILD_MODNAME instead.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "usb_8dev" to populate usb_driver::name and
can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-9-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "kvaser_usb" to populate
usb_driver::name. KBUILD_MODNAME also evaluates to "kvaser_ubs". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "gs_usb" to populate usb_driver::name,
can_bittiming_const::name and
can_data_bittiming_const::name. KBUILD_MODNAME evaluates to
"gs_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "ems_usb" to populate
usb_driver::name. KBUILD_MODNAME also evaluates to "esd_ubs". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
CC: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "softing" to populate platform_driver::name
and can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"softing". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "ems_usb" to populate usb_driver::name and
can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"ems_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "can327" to populate
tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "can327". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses only 1 TEF and 1 TX ring, but a variable number of RX
rings. Fix comment accordingly.
Fixes: e0ab3dd5f98f ("can: mcp251xfd: add dev coredump support")
Link: https://lore.kernel.org/all/20220726084328.4042678-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add basic support for pcb8309. It is similar with pcb8291 with one big
difference that is having 2 SFP cages. Therefore it has 4 network ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220722131836.2377720-3-horatiu.vultur@microchip.com
|
|
Christian Marangi says:
====================
Add MTU change with stmmac interface running
This series is to permit MTU change while the interface is running.
Major rework are needed to permit to allocate a new dma conf based on
the new MTU before applying it. This is to make sure there is enough
space to allocate all the DMA queue before releasing the stmmac driver.
This was tested with a simple way to stress the network while the
interface is running.
2 ssh connection to the device:
- One generating simple traffic with while true; do free; done
- The other making the mtu change with a delay of 1 second
The connection is correctly stopped and recovered after the MTU is changed.
The first 2 patch of this series are minor fixup that fix problems
presented while testing this. One fix a problem when we renable a queue
while we are generating a new dma conf. The other is a corner case that
was notice while stressing the driver and turning down the interface while
there was some traffic.
(this is a follow-up of a simpler patch that wanted to add the same
feature. It was suggested to first try to check if it was possible to
apply the new configuration. Posting as RFC as it does major rework for
the new concept of DMA conf)
====================
Link: https://lore.kernel.org/r/20220723142933.16030-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.
The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.
One of the call paths that could trigger bug is shown below:
(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep
This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the limitation where the interface needs to be down to change
MTU by releasing and opening the stmmac driver to set the new MTU.
Also call the set_filter function to correctly init the port.
This permits to remove the EBUSY error while the ethernet port is
running permitting a correct MTU change if for example a DSA request
a MTU change for a switch CPU port.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rework the driver to generate the stmmac dma_conf before stmmac_open.
This permits a function to first check if it's possible to allocate a
new dma_config and then pass it directly to __stmmac_open and "open" the
interface with the new configuration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move dma buf conf to dedicated struct. This in preparation for code
rework that will permit to allocate separate dma_conf without affecting
the priv struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
release
Disable all queues and disconnect before tx_disable in stmmac_release to
prevent a corner case where packet may be still queued at the same time
tx_disable is called resulting in kernel panic if some packet still has
to be processed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move queue reset to dedicated functions. This aside from a simple
cleanup is also required to allocate a dma conf without resetting the tx
queue while the device is temporarily detached as now the reset is not
part of the dma init function and can be done later in the code flow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
delete extra space and tab in blank line, there is no functional change.
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to an invalid conflict resolution on my side while working on 2
different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add()
does not store the database associated with a dsa_mac_addr structure.
So after adding an FDB entry associated with a LAG, dsa_mac_addr_find()
fails to find it while deleting it, because &a->db is zeroized memory
for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del()
returns -ENOENT rather than deleting the entry.
Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
