summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-18Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-10-18iwlwifi: dvm: don't override mac80211's queue settingEmmanuel Grumbach
Since we set IEEE80211_HW_QUEUE_CONTROL, we can let mac80211 do the queue assignement and don't need to override its decisions. While reassiging the same values is harmless of course, it triggered a WARNING when iwlwifi and mac80211 came to different conclusions. This happened when mac80211 set IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the packet to the cab_queue because no stations were asleep. iwlwifi should not override mac80211's decicions for offchannel packets and packets to be sent after DTIM, but it should override mac80211's decision for AMPDUs since we have a special queue for them. So for AMPDU, we still override info->hw_queue by the AMPDU queue. This avoids: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883() Modules linked in: CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013 0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000 ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000 ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e Call Trace: [<ffffffff8189aa62>] ? dump_stack+0x41/0x51 [<ffffffff8105a4f2>] ? warn_slowpath_common+0x78/0x90 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff818a0040>] ? put_cred+0x15/0x15 [<ffffffff815f6db4>] ? iwlagn_mac_tx+0x19/0x2f [<ffffffff8186cc45>] ? __ieee80211_tx+0x226/0x29b [<ffffffff8186e6bd>] ? ieee80211_tx+0xa6/0xb5 [<ffffffff8186e98b>] ? ieee80211_monitor_start_xmit+0x1e9/0x204 [<ffffffff8171ce5f>] ? dev_hard_start_xmit+0x271/0x3ec [<ffffffff817351ac>] ? sch_direct_xmit+0x66/0x164 [<ffffffff8171d1bf>] ? dev_queue_xmit+0x1e5/0x3c8 [<ffffffff817fac5a>] ? packet_sendmsg+0xac5/0xb3d [<ffffffff81709a09>] ? sock_sendmsg+0x37/0x52 [<ffffffff810f9e0c>] ? __do_fault+0x338/0x36b [<ffffffff81713820>] ? verify_iovec+0x44/0x94 [<ffffffff81709e63>] ? ___sys_sendmsg+0x1f1/0x283 [<ffffffff81140a73>] ? __inode_wait_for_writeback+0x67/0xae [<ffffffff8111735e>] ? __cache_free.isra.46+0x178/0x187 [<ffffffff811173b1>] ? kmem_cache_free+0x44/0x84 [<ffffffff81132c22>] ? dentry_kill+0x13d/0x149 [<ffffffff81132f6f>] ? dput+0xe5/0xef [<ffffffff81136e04>] ? fget_light+0x2e/0x7c [<ffffffff8170ae62>] ? __sys_sendmsg+0x39/0x57 [<ffffffff818a7e39>] ? system_call_fastpath+0x16/0x1b ---[ end trace 1b3eb79359c1d1e6 ]--- Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: fix operator precedenceDavid Spinadel
Integers need to be multiplied before division. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: fix fw_rx_stats debugfs entryLuciano Coelho
The fw_rx_stats entry in debugfs was getting truncated because the internal buffer used to hold the string was too short. The calculation of the needed buffer size was rather bogus. Simplify the calculation by multiplying the number of entries in the entire structure by the size of each data line and adding the size of the header lines. Additionally, add the mac_id value, which was missing. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: BT Coex - enable Tx power based on BT statusEmmanuel Grumbach
The activity grading indication from the firmware should not be used in this case, but the bt_status in the firwmare notification. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: BT Coex - always set mandatory fieldsEmmanuel Grumbach
The firmware always expects the Coex Mode to be set. Moreover, the firmware expects bit 0 is the valid bits to be set all the times. I misunderstood the API and didn't set these bits when commands are sent to update the paramters of the Coex. As a result, the firmware understood that the BT Coex was disabled (Coex mode = 0) and ignored all the updates (valid bit 0 clear). Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: NVM - increase max section sizeIdan Kahlon
Section size limitation to 6000 is incorrect. NVM file need to support bigger sections in order to support PAPD tables. Signed-off-by: Idan Kahlon <idanx.kahlon@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Maor Perez <maorx.perez@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18Bluetooth: Block ATT connection on LE when device is blockedMarcel Holtmann
When the remote LE device is blocked, then do not create a L2CAP channel for it. Without a channel, all packets for that connection will be dropped. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Use hcon directly instead of conn->hcon where possibleMarcel Holtmann
When the HCI connection hcon is already dereferenced, then use hcon directly instead of conn->hcon. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Use BDADDR_BREDR type for old blacklist ioctl interfaceMarcel Holtmann
The old blacklist ioctl interface was only able to operate on BR/EDR addresses. So use the BDADDR_BREDR address type definition instead of an open coded magic 0 value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Fix ATT socket backwards compatibility with user spaceJohan Hedberg
Old user space versions bind the Attribute Protocol socket to BDADDR_BREDR when they should be using BDADDR_LE_PUBLIC or BDADDR_LE_RANDOM. The kernel recently introduced stricter checks on the socket parameters but we need to punch this hole for old user space versions to keep them working. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-18Bluetooth: Move idle_timeout and sniff_{min,max}_interval to hci_core.cMarcel Holtmann
Move the debugfs configuration directly into hci_core.c and only expose it when the controller actually support BR/EDR sniff power saving mode. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Include address type in blacklist debugfs dataMarcel Holtmann
The address type is important for the blacklist entries. So include it at well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Move device_add handling into hci_register_devMarcel Holtmann
The device_add handling can be done directly in hci_register_dev and device_remove within hci_unregister_dev. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Create root debugfs directory during module initMarcel Holtmann
Create the root Bluetooth debugfs directory during module init and remove it on module exit. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Create HCI device debugfs directory in hci_register_devMarcel Holtmann
Create the debugfs directory for each HCI device directly in hci_register_dev function and remove it during hci_unregister_dev. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Use IS_ERR_OR_NULL for checking bt_debugfsMarcel Holtmann
Make sure to use IS_ERR_OR_NULL for checking the existing of the root debugfs dentry bt_debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Move uuids debugfs entry creation into hci_core.cMarcel Holtmann
The uuids debugfs should only be created together with the other entries after the setup procedure has been finished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Move blacklist debugfs entry creation into hci_core.cMarcel Holtmann
The blacklist debugfs should only be created together with the other entries after the setup procedure has been finished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Add address type to device blacklist tableMarcel Holtmann
The device blacklist is not taking care of the address type. Actually store the address type in the list entries and also use them when looking up addresses in the table. This is actually a serious bug. When adding a LE public address to the blacklist, then it would be blocking a device on BR/EDR. And this is not the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17Bluetooth: Expose current voice setting in debugfsMarcel Holtmann
For easier debugging of the current voice setting, expose the value in debugfs if the controller is BR/EDR capable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17Bluetooth: Expose static address value for LE capable controllersMarcel Holtmann
For LE capable controllers, the static address can be configured. For debugging purposes expose the value in debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17Bluetooth: Expose auto_accept_delay debugfs only when SSP is supportedMarcel Holtmann
The auto_accept_delay debugfs entry is only valid for BR/EDR capable controllers that also support SSP. If SSP is not available or it is a LE-only single mode controller this value has no affect and so do not expose it. Since the value can be actually changed, switch the permissions to 0644 to clearly indicate that the value is indeed writeable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17mac80211: disable WMM with invalid parametersJohannes Berg
Some APs (notably a Sitecom WL-153 v1 with firmware 1.45) are sending invalid WMM parameters setting AIFSN, ECWmin and ECWmax to zero. The spec mandates that the value of AIFSN is at least 2, and some cards (e.g. Intel with the iwldvm driver) can't transmit when the invalid QoS parameters are actually uploaded to the firmware. Since there's little chance of being able to guess the values that the AP actually meant, disable WMM if such an invalid case is found. Since ECWmin/ECWmax are allowed to be zero, only verify AIFSN >= 2 and ECWmin <= ECWmax. Reviewed-by: Eliad Peller <eliad@wizery.com> Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-16Bluetooth: Expose inquiry_cache debugfs only on BR/EDR controllersMarcel Holtmann
The inquiry_cache debugfs entry is only valid for BR/EDR capable controllers. In case of single mode LE-only controllers that entry is not valid. Move the creating of the debugfs entries to the end of controller init and only create the inquiry_cache entry if BR/EDR is actually supported. At the same time this avoids creating any debugfs entries for AMP controllers since none of the entries are valid there. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Socket address parameter for CID is in little endianMarcel Holtmann
The L2CAP socket parameter for CID are actually provided in little endian. So convert our constants into little endian before comparing them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Convert idle timer to use delayed workJohan Hedberg
There is no need to use a timer since the entire Bluetooth subsystem runs using workqueues these days. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Convert auto accept timer to use delayed workJohan Hedberg
Since the entire Bluetooth subsystem runs in workqueues these days there is no need to use a timer for deferring work. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Reintroduce socket restrictions for LE socketsJohan Hedberg
Right now we do not allow user space to use connection oriented channels on LE, and the only CID that can be used is the Attribute Protocol one. These restrictions went away together with the recent refactoring of the L2CAP code, but this patch puts them back to their appropriate places. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Fix updating the right variable in update_scan_rsp_data()Johan Hedberg
This function should be operating on scan_rsp_data_len and scan_rsp_data and not the advertising data variables. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16ath10k: add might_sleep() to ath10k_wmi_cmd_send()Kalle Valo
ath10k_wmi_cmd_send() will now sleep if there are no credits available. To make it easier to catch callers in atomic context add might_sleep() to the function. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix ath10k_bss_assoc() to not sleep in atomic contextKalle Valo
ath10k_bss_assoc() was calling ath10k_peer_assoc(), which can sleep, under atomic rcu_read_lock() and causing scheduing while atomic errors. Workaround that by delaying the call to ath10k_wmi_peer_assoc(). Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: remove unnecessary checksMichal Kazior
mac80211 interface iteration functions that were used originally iterated over interfaces that weren't re-added to the driver during recovery. Since internal vif list is now used it's safe to remove the safe-guard as internal vif list is based on add/remove_interface function which guarantees that vdev is created in FW before it is iterated over. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix scheduling while atomic config bugMichal Kazior
Recent HTC/WMI changes introduced the bug. ath10k was using _atomic iteration function with sleepable functions. mac80211 provides another iteration function but it cannot be safely called in hw_config() callback due to local->iflist_mtx being possibly acquired already. The patch uses internal vif list for iteration purposes and removes/refactors no longer necessary _iter functions. Reported-By: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: track vif list internallyMichal Kazior
mac80211 interface interations functions have peculiar locking issues. This patch introduces internal (to ath10k) vif list that will be used for vif iteration purposes. kvalo: remove extra INIT_LIST_HEAD() Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix add_interface failure handlingMichal Kazior
If something failed along add_interface() setup it was possible to leak a vdev id, vdev and peer. This could end up with leaked FW state or FW crash (assuming add_interface() failure wasn't a result of a crash). kvalo: rebased, whitespace fixes Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: use workqueue to set WEP TX keyMichal Kazior
Recent WMI/HTC changes made it possible for WMI commands to sleep (if there's not enough HTC TX credits to submit a command). TX path is in an atomic context so calling WMI commands in it is wrong. This simply moves WEP key index update to a worker and fixes the 'scheduling while atomic' bug. This still leaves multiple WEP key handling laggy, i.e. some frames may be TXed with an old/different key (although recipient should still be able to RX them). kvalo: changed the title Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16Bluetooth: Remove enable_hs declarationMarcel Holtmann
This seems to be a left-over. The module parameter enable_hs has been removed, but its extern declaration is still present. It is not needed anymore, so just remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16ath10k: return better errno for unsupported pdev paramsBartosz Markowski
Return -EOPNOTSUPP if given parameter is not supported by firmware. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: rename WMI_CMD_UNDEFINEDBartosz Markowski
Rename WMI_CMD_UNDEFINED to WMI_CMD_UNSUPPORTED. This is more accurate here. Also return -EOPNOTSUPP instead of -EINVAL in wmi_cmd_send(). Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: do not warn about unsupported vdev paramBartosz Markowski
10.X firmware does not support WMI_VDEV_PARAM_TX_ENCAP_TYPE. It's a known limitation and we should not warn about this. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16Bluetooth: Ignore SMP data on non-LE linksJohan Hedberg
The SMP CID is only defined for LE transports. Instead of returning an error from smp_sig_channel() in this case (which would cause a disconnection) just return 0 to ignore the data, which is consistent with the behavior for other unknown CIDs. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Ignore A2MP data on non-BR/EDR linksJohan Hedberg
The A2MP CID is only valid for BR/EDR transports. We should ignore A2MP data on non-BR/EDR links and refuse to create an amp_mgr object. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Remove useless l2cap_err_to_reason functionJohan Hedberg
Now that the only reason code this function can return is L2CAP_REJ_NOT_UNDERSTOOD we can just do the necessary assignment without needing a separate function at all. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Remove unused command reject mapping for EMSGSIZEJohan Hedberg
There is no command handler that would return an EMSGSIZE error, so just remove this mapping from the l2cap_err_to_reason function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Fix L2CAP "Command Reject: Invalid CID" responseJohan Hedberg
When the reason code in the L2CAP command reject is "invalid CID" there should be four additional bytes of data in the PDU, namely the source and destination CIDs (which should be zero if one or both are not applicable). This patch fixes all occurrences of such errors to return the right kind of PDU. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Remove duplicate definitions for advertising event typesMarcel Holtmann
The constants for advertising event types have been defined twice. So remove one copy of it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Rename update_ad into update_adv_dataMarcel Holtmann
Since there is update_scan_rsp_data, it is also better to use the clear name update_adv_data instead of update_ad. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Store device name in scan response dataMarcel Holtmann
The scan response data is a better place to store the device name since it has more space available and is also enforcing privacy. When the controller is advertising, the connectable setting decides if ADV_IND or ADV_NONCONN_IND is used. In case of ADV_IND, the remote side is allowed to request the scan response data. Same as with BR/EDR where either EIR is used or a remote name request. In non-connectable mode, the device name is not available since it is not allowed to request scan response data. Same as in BR/EDR where the device is non-discoverable and no name requests are answered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Set the scan response data when neededMarcel Holtmann
On controller power on and when enabling LE functionality, make sure that also the scan response data is correctly set. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 17:07:53 +0000