| Age | Commit message (Collapse) | Author |
|---|
|
The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: Techno Mooney <techno.mooney@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218402
Cc: stable@vger.kernel.org
Signed-off-by: Techno Mooney <techno.mooney@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://msgid.link/r/20240129081148.1044891-1-bagasdotme@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:
d8b0f5465012538c ("wire up syscalls for statmount/listmount")
5f42375904b08890 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This reverts commit cca974daeb6c43ea971f8ceff5a7080d7d49ee30.
The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
This reverts commit 5f38ac54e60562323ea4abb1bfb37d043ee23357.
This causes issues with rebooting and the 7800XT.
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: stable@vger.kernel.org
Fixes: 5f38ac54e605 ("drm/amd/pm: fix the high voltage and temperature issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller reported [1] hitting a warning after failing to allocate
resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will
not help much in this case, it might be prudent to switch to
netdev_warn_once(). At the very least it will suppress syzkaller
reports such as [1].
Just in case, use netdev_warn_once() in send_prp_supervision_frame()
for similar reasons.
[1]
HSR: Could not send supervision frame
WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
...
Call Trace:
<IRQ>
hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382
call_timer_fn+0x193/0x590 kernel/time/timer.c:1700
expire_timers kernel/time/timer.c:1751 [inline]
__run_timers+0x764/0xb20 kernel/time/timer.c:2022
run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035
__do_softirq+0x21a/0x8de kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644
sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649
...
This issue is also found in older kernels (at least up to 5.10).
Cc: stable@vger.kernel.org
Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com
Fixes: 121c33b07b31 ("net: hsr: introduce common code for skb initialization")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
|
|
The size passed to snprintf() includes the space for the trailing space.
So there is no reason here not to use all the available space.
So remove the -1 when computing 'name_len'.
While at it, use the size of the array directly instead of the intermediate
'name_len' variable.
snprintf() also guaranties that the buffer if NULL terminated, so there is
no need to write an additional trailing NULL "To be sure".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
While ntfs3 supports discards, FITRIM ioctl() command has defined
only for regular files. This may confuse users trying to invoke
`fstrim` utility with the directory argument (for example, call
`fstrim <mountpoint>` which is the common practice). In this case,
ioctl() returns -ENOTTY without any error messages in kernel ring
buffer, this may be easily interpreted as no support for discards
in ntfs3 driver.
Currently only FITRIM command implemented in ntfs_ioctl() and
passed inode used only for dereferencing NTFS superblock, so
no need for separate ioctl() handler for directories, just add
existing ntfs_ioctl() handler to ntfs_dir_operations.
Signed-off-by: Nekun <nekokun@firemail.cc>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The length of name cannot exceed the space occupied by ea.
Reported-and-tested-by: syzbot+65e940cfb8f99a97aca7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
local_flush_tlb_range_asid() takes the size as argument, not the end of
the range to flush, so fix this by computing the size from the end and
the start of the range.
Fixes: 7a92fc8b4d20 ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
Set the segment size of the virtio_gpu device to the value
used by the drm helpers when allocating sg lists to fix the
following complaint from DMA_API debug code:
DMA-API: virtio-pci 0000:07:00.0: mapping sg segment longer than
device claims to support [len=262144] [max=65536]
Cc: stable@vger.kernel.org
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7258a4cc-da16-5c34-a042-2a23ee396d56@redhat.com
|
|
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3cafc ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This reverts commit 67794f882adca00d043899ac248bc002751da9f6.
We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f641257d
("ALSA: usb-audio: Explicitly set up the clock selector")
The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
1 SF114-32
If you connect an external headset/microphone to the 3.5mm jack on the
Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes
that and gives the user the ability to choose between internal and
headset mic.
Signed-off-by: David Senoner <seda18@rolmail.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Reported-by: Giovanni Santini <giovannisantini93@yahoo.it>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
It used in test environment.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Since the buffer cache for ntfs3 metadata is not released until the file
system is unmounted, allocating from the movable zone may result in cma
allocation failures. This is due to the page still being used by ntfs3,
leading to migration failures.
To address this, this commit use sb_bread_umovable() instead of
sb_bread(). This change prevents allocation from the movable zone,
ensuring compatibility with scenarios where the buffer head is not
released until unmount. This patch is inspired by commit
a8ac900b8163("ext4: use non-movable memory for the ext4 superblock").
The issue is found when playing video files stored in NTFS on the
Android TV platform. During this process, the media parser reads the
video file, causing ntfs3 to allocate buffer cache from the CMA area.
Subsequently, the hardware decoder attempts to allocate memory from the
same CMA area. However, the page is still in use by ntfs3, resulting in
a migrate failure in alloc_contig_range().
The pinned page and allocating stacktrace reported by page owner shows
below:
page:ffffffff00b68880 refcount:3 mapcount:0 mapping:ffffff80046aa828
index:0xc0040 pfn:0x20fa4
aops:def_blk_aops ino:0
flags: 0x2020(active|private)
page dumped because: migration failure
page last allocated via order 0, migratetype Movable,
gfp_mask 0x108c48
(GFP_NOFS|__GFP_NOFAIL|__GFP_HARDWALL|__GFP_MOVABLE),
page_owner tracks the page as allocated
prep_new_page
get_page_from_freelist
__alloc_pages_nodemask
pagecache_get_page
__getblk_gfp
__bread_gfp
ntfs_read_run_nb
ntfs_read_bh
mi_read
ntfs_iget5
dir_search_u
ntfs_lookup
__lookup_slow
lookup_slow
walk_component
path_lookupat
Signed-off-by: Ism Hong <ism.hong@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
io_read_mshot() always relies on poll triggering retries, and this works
fine as long as we do a retry per size of the buffer being read. The
buffer size is given by the size of the buffer(s) in the given buffer
group ID.
But if we're reading less than what is available, then we don't always
get to read everything that is available. For example, if the buffers
available are 32 bytes and we have 64 bytes to read, then we'll
correctly read the first 32 bytes and then wait for another poll trigger
before we attempt the next read. This next poll trigger may never
happen, in which case we just sit forever and never make progress, or it
may trigger at some point in the future, and now we're just delivering
the available data much later than we should have.
io_read_mshot() could do retries itself, but that is wasteful as we'll
be going through all of __io_read() again, and most likely in vain.
Rather than do that, bump our poll reference count and have
io_poll_check_events() do one more loop and check with vfs_poll() if we
have more data to read. If we do, io_read_mshot() will get invoked again
directly and we'll read the next chunk.
io_poll_multishot_retry() must only get called from inside
io_poll_issue(), which is our multishot retry handler, as we know we
already "own" the request at this point.
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1041
Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Parent dir is locked by user_path_locked_at() before validating the
required dentry. It should be unlocked if we can not perform the
deletion.
This fixes the problem:
$ bcachefs subvolume delete not-exist-entry
BCH_IOCTL_SUBVOLUME_DESTROY ioctl error: No such file or directory
$ bcachefs subvolume delete not-exist-entry
the second will stuck because the parent dir is locked in the previous
deletion.
Signed-off-by: Guoyu Ou <benogy@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The gcc compiler on paric does support the __int128 type, although the
architecture does not have native 128-bit support.
The effect is, that the bcachefs u128_square() function will pull in the
libgcc __multi3() helper, which breaks the kernel build when bcachefs is
built as module since this function isn't currently exported in
arch/parisc/kernel/parisc_ksyms.c.
The build failure can be seen in the latest debian kernel build at:
https://buildd.debian.org/status/fetch.php?pkg=linux&arch=hppa&ver=6.7.1-1%7Eexp1&stamp=1706132569&raw=0
We prefer to not export that symbol, so fall back to the optional 64-bit
implementation provided by bcachefs and thus avoid usage of __multi3().
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
|
|
The 'eventfs_update_gid()' function is no longer called, so remove it
(and the helper function it uses).
Link: https://lore.kernel.org/all/CAHk-=wj+DsZZ=2iTUkJ-Nojs9fjYMvPs1NuoM3yK7aTDtJfPYQ@mail.gmail.com/
Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent an inconsistent futex operation leading to stale state
exposure
* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent the reuse of stale pi_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Initialize the resend node of each IRQ descriptor, not only the first
one
* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Initialize resend_node hlist for all interrupt descriptors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Preserve the number of idle calls and sleep entries across CPU
hotplug events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Preserve number of idle sleeps across CPU hotplug events
clocksource: Skip watchdog check for large watchdog intervals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
|
|
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202401222059.Wli6OGT0-lkp@intel.com/
|
|
Printing the inventory on a serial console can be quite slow and thus may
trigger the hung task detector (CONFIG_DETECT_HUNG_TASK=y) and possibly
reboot the machine. Adding a cond_resched() prevents this.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
|
|
Report if the calculated cache stride size is zero, otherwise the cache
flushing routine will never finish and hang the machine.
This can be reproduced with a testcase in qemu, where the firmware reports
wrong cache values.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The rodata_test program for CONFIG_DEBUG_RODATA_TEST=y complains if
read-only data does not start at page boundary.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If there is a problem after resetting a port, the do/while() loop that
checks the default value of DIVLSB register may run forever and spam the
I2C bus.
Add a delay before each read of DIVLSB, and a maximum number of tries to
prevent that situation from happening.
Also fail probe if port reset is unsuccessful.
Fixes: 10d8b34a4217 ("serial: max310x: Driver rework")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A stable clock is really required in order to use this UART, so log an
error message and bail out if the chip reports that the clock is not
stable.
Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some people are seeing a warning similar to this when using a crystal:
max310x 11-006c: clock is not stable yet
The datasheet doesn't mention the maximum time to wait for the clock to be
stable when using a crystal, and it seems that the 10ms delay in the driver
is not always sufficient.
Jan Kundrát reported that it took three tries (each separated by 10ms) to
get a stable clock.
Modify behavior to check stable clock ready bit multiple times (20), and
waiting 10ms between each try.
Note: the first draft of the driver originally used a 50ms delay, without
checking the clock stable bit.
Then a loop with 1000 retries was implemented, each time reading the clock
stable bit.
Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw
Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If regmap_read() returns a non-zero value, the 'val' variable can be left
uninitialized.
Clear it before calling regmap_read() to make sure we properly detect
the clock ready bit.
Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In uart_tiocmget():
result = uport->mctrl;
uart_port_lock_irq(uport);
result |= uport->ops->get_mctrl(uport);
uart_port_unlock_irq(uport);
...
return result;
In uart_update_mctrl():
uart_port_lock_irqsave(port, &flags);
...
port->mctrl = (old & ~clear) | set;
...
port->ops->set_mctrl(port, port->mctrl);
...
uart_port_unlock_irqrestore(port, flags);
An atomicity violation is identified due to the concurrent execution of
uart_tiocmget() and uart_update_mctrl(). After assigning
result = uport->mctrl, the mctrl value may change in uart_update_mctrl(),
leading to a mismatch between the value returned by
uport->ops->get_mctrl(uport) and the mctrl value previously read.
This can result in uart_tiocmget() returning an incorrect value.
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 5.17.
To address this issue, it is suggested to move the line
result = uport->mctrl inside the uart_port_lock block to ensure atomicity
and prevent the mctrl value from being altered during the execution of
uart_tiocmget(). With this patch applied, our tool no longer reports the
bug, with the kernel configuration allyesconfig for x86_64. Due to the
absence of the requisite hardware, we are unable to conduct runtime
testing of the patch. Therefore, our verification is solely based on code
logic analysis.
[1] https://sites.google.com/view/basscheck/
Fixes: c5f4644e6c8b ("[PATCH] Serial: Adjust serial locking")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Link: https://lore.kernel.org/r/20240112113624.17048-1-2045gemini@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These > comparisons should be >= to prevent writing one element beyond
the end of the rx_buff[] array. The rx_buff[] buffer has RX_BUF_SIZE
elements. Fix the buffer overflow.
Fixes: aba8290f368d ("8250: microchip: pci1xxxx: Add Burst mode reception support in uart driver for writing into FIFO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZZ7vIfj7Jgh-pJn8@moroto
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the commit 93f3350c46fa ("RS485: fix inconsistencies in the
meaning of some variables"), the definition for bit 3 has been removed.
But with the switch to bit shift macros in commit 76ac8e29855b ("tty:
serial: Cleanup the bit shift with macro"), this gap wasn't preserved.
To avoid a break in user/kernel api of the system skip bit 3 again and
add a placeholder comment.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Fixes: 76ac8e29855b ("tty: serial: Cleanup the bit shift with macro")
Fixes: 6056f20f27e9 ("tty: serial: Add RS422 flag to struct serial_rs485")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: Hugo Villeneuve <hugo@hugovil.com>
Link: https://lore.kernel.org/r/20240119113516.2944-1-cniedermaier@dh-electronics.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the PD is disabled for the port, port->pds will be left as NULL,
which causes the following crash during caps intilisation. Fix the
crash.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
tcpm_register_port+0xaec/0xc44
qcom_pmic_typec_probe+0x1a4/0x254
platform_probe+0x68/0xc0
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0x12c
driver_probe_device+0xd8/0x160
Bluetooth: hci0: QCA Product ID :0x0000000a
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x80/0xdc
Bluetooth: hci0: QCA SOC Version :0x40020150
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x1ec/0x51c
worker_thread+0x1ec/0x3e4
kthread+0x120/0x124
ret_from_fork+0x10/0x20
Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240113-pmi632-typec-v2-5-182d9aa0a5b3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
