summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-10pwm: atmel-tcb: Simplify checking the companion outputUwe Kleine-König
The two outputs provided by the supported hardware share some settings, so access to the other PWM is required when one of them is configured. Instead of an explicit if to deterimine the other PWM just use hwpwm ^ 1. Further atcbpwm is never NULL, so drop the corresponding check. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240709101806.52394-4-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Allow pwm state transitions from an invalid stateUwe Kleine-König
While driving a PWM via the sysfs API it's hard to determine the right order of writes to the pseudo files "period" and "duty_cycle": If you want to go from duty_cycle/period = 50/100 to 150/300 you have to write period first (because 150/100 is invalid). If however you start at 400/500 the duty_cycle must be configured first. The rule that works is: If you increase period write period first, otherwise write duty_cycle first. A complication however is that it's usually sensible to configure the polarity before both period and duty_cycle. This can only be done if the current state's duty_cycle and period configuration isn't bogus though. It is still worse (but I think only theoretic) if you have a PWM that only supports inverted polarity and you start with period = 0 and polarity = normal. Then you can change neither period (because polarity = normal is refused) nor polarity (because there is still period = 0). To simplify the corner cases for userspace, let invalid target states pass if the current state is invalid already. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240628103519.105020-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: xilinx: Simplify using devm_ functionsUwe Kleine-König
There are devm variants for clk_prepare_enable() and pwmchip_add(); and clk_prepare_enable() can be done together with devm_clk_get(). This allows to simplify the error paths in .probe() and drop .remove() completely. With the remove callback gone, the last user of platform_get_drvdata() is gone and so the call to platform_set_drvdata() can be dropped, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20240628063524.92907-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + ↵Uwe Kleine-König
mutex_unlock With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/28807cb5d9dbce66860f74829c0f57cd9c01373e.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlockUwe Kleine-König
With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. There is just one caller left for mutex_lock(&export->lock). The code flow is too complicated there to convert it to the compiler assisted variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/210010f2e579a92476462726e18e0135f6854909.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlockUwe Kleine-König
With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/2102fe8189bdf1f02ff3785b551a69be27a65af4.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Register debugfs operations after the pwm classUwe Kleine-König
While the debugfs operations don't technically depend on an initialized class, they loop over the idr that only can get entries when the class is properly initialized. This also fixes the ugly (but harmless) corner case that the debugfs file stays around after the pwm class failed to initialize. While at it, add an appropriate error message when class initialization fails. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240626222529.2901200-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: imx-tpm: Enable pinctrl setting for sleep stateShenwei Wang
Apply the pinctrl setting of sleep state when system enters suspend state. Restore to the default pinctrl setting when system resumes. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240702164514.11007-1-shenwei.wang@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: lpss: drop redundant runtime PM handlesRaag Jadav
We no longer need empty runtime PM handles for PCI devices after commits [1] and [2]. Drop them and let PCI core take care of power state transitions. [1] c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") [2] fa885b06ec7e ("PCI/PM: Allow runtime PM with no PM callbacks at all") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20240605131533.20037-3-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: lpss: use devm_pm_runtime_enable() helperRaag Jadav
Use devm_pm_runtime_enable() helper to enable runtime PM and drop redundant platform ->remove() callback. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20240605131533.20037-2-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm-stm32: Make use of parametrised register definitionsUwe Kleine-König
There is no semantic change, but it is a nicer on the eyes of a reader, because TIM_CCR1 + 4 * ch encodes internal register knowledge, while TIM_CCRx(ch + 1) keeps that information completely in the header defining the registers. While I expected this to not result in any changes in the binary, gcc 13 (as provided by Debian in the gcc-13-arm-linux-gnueabihf 13.2.0-12cross1 package) compiles the new version with an allmodconfig to more compact code: $ source/scripts/bloat-o-meter drivers/pwm/pwm-stm32.o-pre drivers/pwm/pwm-stm32.o add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-488 (-488) Function old new delta stm32_pwm_get_state 968 936 -32 stm32_pwm_apply_locked 1920 1464 -456 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/d7ef7a6158df4ba6687233b0e00d37796b069fb3.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10Merge tag 'ib-mfd-counter-v5.11' of ↵Uwe Kleine-König
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into HEAD Immutable branch between MFD and Counter due for the v5.11 merge window
2024-07-10dt-bindings: pwm: imx: remove interrupt property from requiredFrank Li
The driver "drivers/pwm/pwm-imx27.c" never use interrupt. Generally pwm hardware generate a waveform according to register timing setting. Needn't interrupt handle at all. So remove it from "required" list. Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240605220839.1398872-1-Frank.Li@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: meson: Add support for Amlogic S4 PWMJunyi Zhao
Add support for Amlogic S4 PWM. Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com> Reviewed-by: George Stark <gnstark@salutedevices.com> Link: https://lore.kernel.org/r/20240613-s4-pwm-v8-1-b5bd0a768282@amlogic.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Add GPIO PWM driverVincent Whitchurch
Add a software PWM which toggles a GPIO from a high-resolution timer. This will naturally not be as accurate or as efficient as a hardware PWM, but it is useful in some cases. I have for example used it for evaluating LED brightness handling (via leds-pwm) on a board where the LED was just hooked up to a GPIO, and for a simple verification of the timer frequency on another platform. Since high-resolution timers are used, sleeping GPIO chips are not supported and are rejected in the probe function. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Co-developed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Co-developed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20240604-pwm-gpio-v7-2-6b67cf60db92@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10dt-bindings: pwm: Add pwm-gpioNicola Di Lieto
Add bindings for PWM modulated by GPIO. Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com> Co-developed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240604-pwm-gpio-v7-1-6b67cf60db92@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Drop pwm_apply_state()Uwe Kleine-König
This function is not supposed to be used any more since commit c748a6d77c06 ("pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()") that is included in v6.8-rc1. Two kernel releases should be enough for everyone to adapt, so drop the old function that was introduced as a compatibility stub for the transition. Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10bus: ts-nbus: Use pwm_apply_might_sleep()Sean Young
pwm_apply_state() is deprecated since commit c748a6d77c06a ("pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()"). Signed-off-by: Sean Young <sean@mess.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240614090829.560605-1-sean@mess.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Remove wrong implementation details from pwm_ops's documentationUwe Kleine-König
When .get_state() is called is an implementation detail that implementors and users shouldn't care about and rely on. Additionally it's wrong, because with PWM_DEBUG enabled it is called more often. Just drop the wrong statement. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/611ba758d7e9fb2695e96b23cb7ceeefb6ba8513.1717756902.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Make pwm_request_from_chip() private to the coreUwe Kleine-König
The last user of this function outside of core.c is gone, so it can be made static. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-8-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: cros-ec: Simplify device tree xlationUwe Kleine-König
The cros-ec device tree binding only uses #pwm-cells = <1>, and so there is no period provided in the device tree. Up to now this was handled by hardcoding the period to the only supported value in the custom xlate callback. Apart from that, the default xlate callback (i.e. of_pwm_xlate_with_flags()) handles this just fine (and better, e.g. by checking args->args_count >= 1 before accessing args->args[0]). To simplify make use of of_pwm_xlate_with_flags(), drop the custom callback and provide the default period in .probe() already. Apart from simplifying the driver this also drops the last non-core user of pwm_request_from_chip() and so makes further simplifications possible. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-7-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: cros-ec: Don't care about consumers in .get_state()Uwe Kleine-König
The get_state() callback is never called (in a visible way) after there is a consumer for a pwm device. The core handles loosing the information about duty_cycle just fine. Simplify the driver accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-6-u.kleine-koenig@baylibre.com [Drop kdoc comment for channel to make W=1 builds happy] Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Make use of a symbol namespace for the coreUwe Kleine-König
Define all pwm core's symbols in the namespace "PWM". The necessary module import statement is just added to the main header, this way every file that knows about the public functions automatically has this namespace available. Thanks to Biju Das for pointing out a cut'n'paste failure in my initial patch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240607160012.1206874-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: add missing MODULE_DESCRIPTION() macrosJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx27.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-intel-lgm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-mediatek.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-pxa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-samsung.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-spear.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-visconti.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240610-md-drivers-pwm-v2-1-b337cfaa70ea@quicinc.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: axi-pwmgen: Make use of regmap_clear_bits()Uwe Kleine-König
Instead of using regmap_update_bits() and passing val=0, better use regmap_clear_bits(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240606164047.534741-6-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: jz4740: Another few conversions to regmap_{set,clear}_bits()Uwe Kleine-König
Similar to commit 7d9199995412 ("pwm: jz4740: Use regmap_{set,clear}_bits") convert two more regmap_update_bits() calls to regmap_{set,clear}_bits() which were missed back then. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20240606164047.534741-5-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Add driver for AXI PWM generatorDrew Fustini
Add support for the Analog Devices AXI PWM Generator. This device is an FPGA-implemented peripheral used as PWM signal generator and can be interfaced with AXI4. The register map of this peripheral makes it possible to configure the period and duty cycle of the output signal. Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Co-developed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://lore.kernel.org/r/20240605203507.1934434-3-tgamblin@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10dt-bindings: pwm: Add AXI PWM generatorDrew Fustini
Add Analog Devices AXI PWM generator. Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html Signed-off-by: Drew Fustini <dfustini@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://lore.kernel.org/r/20240605203507.1934434-2-tgamblin@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10dt-bindings: pwm: fsl-ftm: Convert to yaml formatFrank Li
Convert dt-bindings pwm-fsl-ftm.txt to yaml format. Additional change during convert: - "big-endian" is not required property. - Add "sleep" to pinctrl-names. - Change pinctrl-NNN to pinctrl-0 and pinctrl-1. - Remove label "pwm0" in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240528202025.2919358-1-Frank.Li@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: atmel-tcb: Fix race condition and convert to guardsUwe Kleine-König
The hardware only supports a single period length for both PWM outputs. So atmel_tcb_pwm_config() checks the configuration of the other output if it's compatible with the currently requested setting. The register values are then actually updated in atmel_tcb_pwm_enable(). To make this race free the lock must be held during the whole process, so grab the lock in .apply() instead of individually in atmel_tcb_pwm_disable() and atmel_tcb_pwm_enable() which then also covers atmel_tcb_pwm_config(). To simplify handling, use the guard helper to let the compiler care for unlocking. Otherwise unlocking would be more difficult as there is more than one exit path in atmel_tcb_pwm_apply(). Fixes: 9421bade0765 ("pwm: atmel: add Timer Counter Block PWM driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240709101806.52394-3-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-05dt-bindings: pwm: describe the cells in #pwm-cells in pwm.yamlConor Dooley
When commit 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema") converted the pwm provider section of the text binding to dt-schema it also updated all references to pwm.txt in pwm provider bindings to pwm.yaml. Most pwm provider bindings had a reference to pwm.txt as it contains a description of what the cells in #pwm-cells are, albeit in the consumer section of the document. Only information in the provider section of the document was moved to the yaml binding, and it contains no information about the cell format, making all references to it for the cell format unhelpful. Fixes: 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240517-patient-stingily-30611f73e792@spud Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-07-05pwm: stm32: Always do lazy disablingUwe Kleine-König
When the state changes from enabled to disabled, polarity, duty_cycle and period are not configured in hardware and TIM_CCER_CCxE is just cleared. However if the state changes from one disabled state to another, all parameters are written to hardware because the early exit from stm32_pwm_apply() is only taken if the pwm is currently enabled. This yields surprises like: Applying { .period = 1, .duty_cycle = 0, .enabled = false } succeeds if the pwm is initially on, but fails if it's already off because 1 is a too small period. Update the check for lazy disable to always exit early if the target state is disabled, no matter what is currently configured. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-26mfd: stm32-timers: Drop unused TIM_DIER_CC_IEUwe Kleine-König
This macro is misleading as TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE . The only user was updated to use TIM_DIER_CCxIE() instead which doesn't suffer from this mismatch, so TIM_DIER_CC_IE can be dropped. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/6c8fcc4ed159992a1dbb0796087e6ceb10c39c96.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-06-26counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)Uwe Kleine-König
These two defines have the same purpose and this change doesn't introduce any differences in drivers/counter/stm32-timer-cnt.o. The only difference between the two is that TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE while TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE . That makes it necessary to have an explicit "+ 1" in the user code, but IMHO this is a good thing as this is the code locatation that "knows" that for software channel 1 you have to use TIM_DIER_CC2IE (because software guys start counting at 0, while the relevant hardware designer started at 1). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: William Breathitt Gray <wbg@kernel.org> Link: https://lore.kernel.org/r/126bd153a03f39e42645573eecf44ffab5354fc7.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-06-26mfd: stm32-timers: Add some register definitions with a parameterUwe Kleine-König
There are some registers that belong together and are numbered from 1 to 4. Introduce a macro definition for these that takes the channel number as parameter and define the previously available constants using the new ones. This allows to simplify some users that up to now use constructs like TIM_CCER_CC1NE << (ch * 4) which is an ugly mix of using a predefined value and still knowing internal details about it. Note that there are several decrements by 1 involved. These are necessary because software guys start counting at 0 while the hardware designer started at 1 (and having TIM_CCER_CCxE(1) be TIM_CCER_CC2E isn't a sane option). The compiler is expected to optimize these out nicely. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/05df15f61dde81033407d3b4fcb67ee403ecc8db.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-06-26mfd: stm32-timers: Unify alignment of register definitionUwe Kleine-König
Use tabs consistently for indention and properly align register names, values and comments. This improves readability (at least for my eyes). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/da3b7f9af5794d7463aa62cbaa7251abf1af2018.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-06-22pwm: stm32: Fix error message to not describe the previous error pathUwe Kleine-König
"Failed to lock the clock" is an appropriate error message for clk_rate_exclusive_get() failing, but not for the clock running too fast for the driver's calculations. Adapt the error message accordingly. Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-22pwm: stm32: Fix calculation of prescalerUwe Kleine-König
A small prescaler is beneficial, as this improves the resolution of the duty_cycle configuration. However if the prescaler is too small, the maximal possible period becomes considerably smaller than the requested value. One situation where this goes wrong is the following: With a parent clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for period = 941243 ns currently results in PSC = 1. The value for ARR is then calculated to ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301 This value is bigger than 65535 however and so doesn't fit into the respective register field. In this particular case the PWM was configured for a period of 313733.4806027616 ns (with ARR = 98301 & 0xffff). Even if ARR was configured to its maximal value, only period = 627495.6861167669 ns would be achievable. Fix the calculation accordingly and adapt the comment to match the new algorithm. With the calculation fixed the above case results in PSC = 2 and so an actual period of 941229.1667195285 ns. Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-21pwm: stm32: Refuse too small period requestsUwe Kleine-König
If period_ns is small, prd might well become 0. Catch that case because otherwise with regmap_write(priv->regmap, TIM_ARR, prd - 1); a few lines down quite a big period is configured. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Cc: stable@vger.kernel.org Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-05-26Linux 6.10-rc1v6.10-rc1Linus Torvalds
2024-05-26mm: percpu: Include smp.h in alloc_tag.hKent Overstreet
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/ Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-05-26Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
2024-05-26Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"Arnaldo Carvalho de Melo
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-05-25Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
2024-05-25Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
2024-05-25Merge tag 'irq-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
2024-05-25Merge tag 'x86-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
2024-05-25Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
2024-05-25Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
2024-05-25Merge tag 'ntfs3_for_6.10' of ↵Linus Torvalds
https://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
generated by cgit (git 2.34.1) at 2025-09-10 20:36:59 +0000