| Age | Commit message (Collapse) | Author |
|---|
|
Previously, access_guest_page() did not check whether the given guest
address is inside of a memslot. This is not a problem, since
kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot
usually means that an addressing exception should be injected into the
guest.
Failure in copy_to/from_user however indicates that something is wrong
in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in
access_guest_page() when the guest address is outside guest memory. In
access_guest_real(), populate vcpu->arch.pgm.code such that
kvm_s390_inject_prog_cond() can be used in the caller for injecting into
the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make
sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in
guest_range_to_gpas()), so this case should never happen. Even if, the
handling is set up properly.
- access_guest_real() just passes the return code to its callers, which
are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always
return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this
could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on
write_guest_real() failure.
Fixes: 2293897805c2 ("KVM: s390: add architecture compliant guest access functions")
Cc: stable@vger.kernel.org
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A crypto card comes in 3 flavors: accelerator, CCA co-processor or
EP11 co-processor. Within a protected execution environment only the
accelerator and EP11 co-processor is supported. However, it is
possible to set up a KVM guest with a CCA card and run it as a
protected execution guest. There is nothing at the host side which
prevents this. Within such a guest, a CCA card is shown as "illicit"
and you can't do anything with such a crypto card.
Regardless of the unsupported CCA card within a protected execution
guest there are a couple of user space applications which
unconditional try to run crypto requests to the zcrypt device
driver. There was a bug within the AP bus code which allowed such a
request to be forwarded to a CCA card where it is finally
rejected and the driver reacts with -ENODEV but also triggers an AP
bus scan. Together with a retry loop this caused some kind of "hang"
of the KVM guest. On startup it caused timeouts and finally led the
KVM guest startup fail. Fix that by closing the gap and make sure a
CCA card is not usable within a protected execution environment.
Another behavior within an protected execution environment with CCA
cards was that the se_bind and se_associate AP queue sysfs attributes
where shown. The implementation unconditional always added these
attributes. Fix that by checking if the card mode is supported within
a protected execution environment and only if valid, add the attribute
group.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The Linux implementation of PCI error recovery for s390 was based on the
understanding that firmware error recovery is a two step process with an
optional initial error event to indicate the cause of the error if known
followed by either error event 0x3A (Success) or 0x3B (Failure) to
indicate whether firmware was able to recover. While this has been the
case in testing and the error cases seen in the wild it turns out this
is not correct. Instead firmware only generates 0x3A for some error and
service scenarios and expects the OS to perform recovery for all PCI
events codes except for those indicating permanent error (0x3B, 0x40)
and those indicating errors on the function measurement block (0x2A,
0x2B, 0x2C). Align Linux behavior with these expectations.
Fixes: 4cdf2f4e24ff ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The Line6 driver source code files contain an outdated email address of the
original author. This patch updates the contact information.
Signed-off-by: Markus Grabner <line6@grabner-graz.at>
Link: https://patch.msgid.link/20241009194251.15662-1-line6@grabner-graz.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit adding support for multiple control interfaces expanded struct
snd_usb_power_domain with pointer to control interface for proper control
message routing but missed one initialization point of this structure,
which has left new field with NULL value.
Standard mandates that each device has at least one control interface and
code responsible for power domain does not check for NULL values when
querying for control interface. This caused some USB devices to crash
the kernel.
Fixes: 6aa8700150f7 ("ALSA: usb-audio: Support multiple control interfaces")
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285B563C6B5394DB274813FEC782@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dev_pm_domain_attach|detach_list() functions are not resource managed,
hence they should not use devm_* helpers to manage allocation/freeing of
data. Let's fix this by converting to the traditional alloc/free functions.
Fixes: 161e16a5e50a ("PM: domains: Add helper functions to attach/detach multiple PM domains")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-3-ulf.hansson@linaro.org
|
|
This reverts commit f790b5c09665cab0d51dfcc84832d79d2b1e6c0e.
The reverted commit was not ready to be applied due to dependency on other
OPP/pmdomain changes that didn't make it for the last release cycle. Let's
revert it to fix the behaviour.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-2-ulf.hansson@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict xtables extensions to families that are safe, syzbot found
a way to combine ebtables with extensions that are never used by
userspace tools. From Florian Westphal.
2) Set l3mdev inconditionally whenever possible in nft_fib to fix lookup
mismatch, also from Florian.
netfilter pull request 24-10-09
* tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: conntrack_vrf.sh: add fib test case
netfilter: fib: check correct rtable in vrf setups
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
====================
Link: https://patch.msgid.link/20241009213858.3565808-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While working with the T-Head 1520 LicheePi4A SoC, certain conditions
arose that allowed me to reproduce a race issue in the sdhci code.
To reproduce the bug, you need to enable the sdio1 controller in the
device tree file
`arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi` as follows:
&sdio1 {
bus-width = <4>;
max-frequency = <100000000>;
no-sd;
no-mmc;
broken-cd;
cap-sd-highspeed;
post-power-on-delay-ms = <50>;
status = "okay";
wakeup-source;
keep-power-in-suspend;
};
When resetting the SoC using the reset button, the following messages
appear in the dmesg log:
[ 8.164898] mmc2: Got command interrupt 0x00000001 even though no
command operation was in progress.
[ 8.174054] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 8.180503] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000005
[ 8.186950] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 8.193395] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 8.199841] mmc2: sdhci: Present: 0x03da0000 | Host ctl: 0x00000000
[ 8.206287] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 8.212733] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000decf
[ 8.219178] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 8.225622] mmc2: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
[ 8.232068] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 8.238513] mmc2: sdhci: Caps: 0x3f69c881 | Caps_1: 0x08008177
[ 8.244959] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00191919
[ 8.254115] mmc2: sdhci: Resp[0]: 0x00001009 | Resp[1]: 0x00000000
[ 8.260561] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 8.267005] mmc2: sdhci: Host ctl2: 0x00001000
[ 8.271453] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
0x0000000000000000
[ 8.278594] mmc2: sdhci: ============================================
I also enabled some traces to better understand the problem:
kworker/3:1-62 [003] ..... 8.163538: mmc_request_start:
mmc2: start struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_arg=0x0 cmd_flags=0x2e1 cmd_retries=0 stop_opcode=0 stop_arg=0x0
stop_flags=0x0 stop_retries=0 sbc_opcode=0 sbc_arg=0x0 sbc_flags=0x0
sbc_retires=0 blocks=0 block_size=0 blk_addr=0 data_flags=0x0 tag=0
can_retune=0 doing_retune=0 retune_now=0 need_retune=0 hold_retune=1
retune_period=0
<idle>-0 [000] d.h2. 8.164816: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x10000
intmask_p=0x18000
irq/24-mmc2-96 [000] ..... 8.164840: sdhci_thread_irq:
msg=
irq/24-mmc2-96 [000] d.h2. 8.164896: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x1
intmask_p=0x1
irq/24-mmc2-96 [000] ..... 8.285142: mmc_request_done:
mmc2: end struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_err=-110 cmd_resp=0x0 0x0 0x0 0x0 cmd_retries=0 stop_opcode=0
stop_err=0 stop_resp=0x0 0x0 0x0 0x0 stop_retries=0 sbc_opcode=0
sbc_err=0 sbc_resp=0x0 0x0 0x0 0x0 sbc_retries=0 bytes_xfered=0
data_err=0 tag=0 can_retune=0 doing_retune=0 retune_now=0 need_retune=0
hold_retune=1 retune_period=0
Here's what happens: the __mmc_start_request function is called with
opcode 5. Since the power to the Wi-Fi card, which resides on this SDIO
bus, is initially off after the reset, an interrupt SDHCI_INT_TIMEOUT is
triggered. Immediately after that, a second interrupt SDHCI_INT_RESPONSE
is triggered. Depending on the exact timing, these conditions can
trigger the following race problem:
1) The sdhci_cmd_irq top half handles the command as an error. It sets
host->cmd to NULL and host->pending_reset to true.
2) The sdhci_thread_irq bottom half is scheduled next and executes faster
than the second interrupt handler for SDHCI_INT_RESPONSE. It clears
host->pending_reset before the SDHCI_INT_RESPONSE handler runs.
3) The pending interrupt SDHCI_INT_RESPONSE handler gets called, triggering
a code path that prints: "mmc2: Got command interrupt 0x00000001 even
though no command operation was in progress."
To solve this issue, we need to clear pending interrupts when resetting
host->pending_reset. This ensures that after sdhci_threaded_irq restores
interrupts, there are no pending stale interrupts.
The behavior observed here is non-compliant with the SDHCI standard.
Place the code in the sdhci-of-dwcmshc driver to account for a
hardware-specific quirk instead of the core SDHCI code.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 43658a542ebf ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008100327.4108895-1-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The STM32MP25 SOC has capability to behave in device mode however
missing .has_device_mode within its stm32mp25_spi_cfg structure leads
to not being able to enable the device mode.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20241009-spi-mp25-device-fix-v1-1-8e5ca7db7838@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When v4 topology support was removed, minimal topology ABI version
should have been bumped.
Fixes: fe4a07454256 ("ASoC: Drop soc-topology ABI v4 support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241009081230.304918-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added proper error handling for register value check that
return -EPERM when register value does not meet expected condition
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241009073938.7472-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During the migration of Soundwire runtime stream allocation from
the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845
soundcard was forgotten.
At this point any playback attempt or audio daemon startup, for instance
on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer
NULL dereference:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 5 UID: 0 PID: 1198 Comm: aplay
Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18
Hardware name: Thundercomm Dragonboard 845c (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
sp : ffff80008a2035c0
x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000
x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800
x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003
x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000
x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec
x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003
x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8
Call trace:
sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x]
snd_soc_dai_hw_params+0x3c/0xa4
__soc_pcm_hw_params+0x230/0x660
dpcm_be_dai_hw_params+0x1d0/0x3f8
dpcm_fe_dai_hw_params+0x98/0x268
snd_pcm_hw_params+0x124/0x460
snd_pcm_common_ioctl+0x998/0x16e8
snd_pcm_ioctl+0x34/0x58
__arm64_sys_ioctl+0xac/0xf8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xe0
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: aa0403fb f9418400 9100e000 9400102f (f8420f22)
---[ end trace 0000000000000000 ]---
0000000000006108 <sdw_stream_add_slave>:
6108: d503233f paciasp
610c: a9b97bfd stp x29, x30, [sp, #-112]!
6110: 910003fd mov x29, sp
6114: a90153f3 stp x19, x20, [sp, #16]
6118: a9025bf5 stp x21, x22, [sp, #32]
611c: aa0103f6 mov x22, x1
6120: 2a0303f5 mov w21, w3
6124: a90363f7 stp x23, x24, [sp, #48]
6128: aa0003f8 mov x24, x0
612c: aa0203f7 mov x23, x2
6130: a9046bf9 stp x25, x26, [sp, #64]
6134: aa0403f9 mov x25, x4 <-- x4 copied to x25
6138: a90573fb stp x27, x28, [sp, #80]
613c: aa0403fb mov x27, x4
6140: f9418400 ldr x0, [x0, #776]
6144: 9100e000 add x0, x0, #0x38
6148: 94000000 bl 0 <mutex_lock>
614c: f8420f22 ldr x2, [x25, #32]! <-- offset 0x44
^^^
This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave()
where data abort happens.
wsa881x_hw_params() is called with stream = NULL and passes it further
in register x4 (5th argument) to sdw_stream_add_slave() without any checks.
Value from x4 is copied to x25 and finally it aborts on trying to load
a value from address in x25 plus offset 32 (in dec) which corresponds
to master_list member in struct sdw_stream_runtime:
struct sdw_stream_runtime {
const char * name; /* 0 8 */
struct sdw_stream_params params; /* 8 12 */
enum sdw_stream_state state; /* 20 4 */
enum sdw_stream_type type; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
here-> struct list_head master_list; /* 32 16 */
int m_rt_count; /* 48 4 */
/* size: 56, cachelines: 1, members: 6 */
/* sum members: 48, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 56 bytes */
Fix this by adding required calls to qcom_snd_sdw_startup() and
sdw_release_stream() to startup and shutdown routines which restores
the previous correct behaviour when ->set_stream() method is called to
set a valid stream runtime pointer on playback startup.
Reproduced and then fix was tested on db845c RB3 board.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org
Fixes: 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20241009213922.999355-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missing snd_soc_dai_link.platforms assignment to avoid
soc_dai_link_sanity_check() failure.
Fixes: d24028606e76 ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/6645888f2f9e8a1d8d799109f867d0f97fd78c58.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While we do currently return -EFAULT in this case, it seems prudent to
follow the behaviour of other syscalls like clone3. It seems quite
unlikely that anyone depends on this error code being EFAULT, but we can
always revert this if it turns out to be an issue.
Cc: stable@vger.kernel.org # v5.6+
Fixes: fddb5d430ad9 ("open: introduce openat2(2) syscall")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20241010-extensible-structs-check_fields-v3-3-d2833dfe6edd@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Fixes: f88649721268 ("ipv4: fix dst race in sk_dst_get()")
Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The previous patch removed the ENOENT warning at the point of
allocation, but the overall self-test warning is still there.
Fix all of them by returning zero as the test result. This is
safe because if the algorithm has gone away, then it cannot be
marked as tested.
Fixes: 4eded6d14f5b ("crypto: testmgr - Hide ENOENT errors")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As algorithm testing is carried out without holding the main crypto
lock, it is always possible for the algorithm to go away during the
test.
So before crypto_alg_tested updates the status of the tested alg,
it checks whether it's still on the list of all algorithms. This
is inaccurate because it may be off the main list but still on the
list of algorithms to be removed.
Updating the algorithm status is safe per se as the larval still
holds a reference to it. However, killing spawns of other algorithms
that are of lower priority is clearly a deficiency as it adds
unnecessary churn.
Fix the test by checking whether the algorithm is dead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Modify the entry for the ahci_platform driver (LIBATA SATA
AHCI PLATFORM devices support) in the MAINTAINERS file to remove Jens
as maintainer. Also remove all references to Jens block tree from the
various LIBATA driver entries as the tree reference for these is defined
by the LIBATA SUBSYSTEM entry.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20241010020117.416333-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
|
|
entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
|
|
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
|
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
|
AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.
Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
|
|
Jeff Layton <jlayton@kernel.org> says:
The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around 1
per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide when to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in inode->i_ctime_nsec
as a flag that indicates whether the current timestamps have been
queried via stat() or the like. When it's set, we allow the kernel to
use a fine-grained timestamp iff it's necessary to make the ctime show
a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible for a
file being changed to get a fine-grained timestamp. A file that is
altered just a bit later can then get a coarse-grained one that appears
older than the earlier fine-grained time. This violates timestamp
ordering guarantees.
To remedy this, keep a global monotonic atomic64_t value that acts as a
timestamp floor. When we go to stamp a file, we first get the latter of
the current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it with
that value.
If it has been queried, then first see whether the current coarse time
is later than the existing ctime. If it is, then we accept that value.
If it isn't, then we get a fine-grained time and try to swap that into
the global floor. Whether that succeeds or fails, we take the resulting
floor time, convert it to realtime and try to swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails, since
either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same floor
value as multigrain filesystems).
* patches from https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org:
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Link: https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip into vfs.mgtime
Timekeeping interfaces for consumption by the VFS tree.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
tmpfs only requires the FS_MGTIME flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-12-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Beyond enabling the FS_MGTIME flag, this patch eliminates
update_time_for_write, which goes to great pains to avoid in-memory
stores. Just have it overwrite the timestamps unconditionally.
Note that this also drops the IS_I_VERSION check and unconditionally
bumps the change attribute, since SB_I_VERSION is always set on btrfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-11-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
For ext4, we only need to enable the FS_MGTIME flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-10-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Also, anytime the mtime changes, the ctime must also change, and those
are now the only two options for xfs_trans_ichgtime. Have that function
unconditionally bump the ctime, and ASSERT that XFS_ICHGTIME_CHG is
always set.
Finally, stop setting STATX_CHANGE_COOKIE in getattr, since the ctime
should give us better semantics now.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-9-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a high-level document that describes how multigrain timestamps work,
rationale for them, and some info about implementation and tradeoffs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-8-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
New percpu counters for counting various stats around multigrain
timestamp events, and a new debugfs file for displaying them when
CONFIG_DEBUG_FS is enabled:
- number of attempted ctime updates
- number of successful i_ctime_nsec swaps
- number of fine-grained timestamp fetches
- number of floor value swap events
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-7-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some tracepoints around various multigrain timestamp events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-6-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
An update to the inode ctime typically requires the latest clock
value possible. The exception to this rule is when there is a nfsd write
delegation and the server is proxying timestamps from the client.
When nfsd gets a CB_GETATTR response, update the timestamp value in the
inode to the values that the client is tracking. The client doesn't send
a ctime value (since that's always determined by the exported
filesystem), but it can send a mtime value. In the case where it does,
update the ctime to a value commensurate with that instead of the
current time.
If ATTR_DELEG is set, then use ia_ctime value instead of setting the
timestamp to the current time.
With the addition of delegated timestamps, the server may receive a
request to update only the atime, which doesn't involve a ctime update.
Trust the ATTR_CTIME flag in the update and only update the ctime when
it's set.
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-5-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The mgtime_floor value is a global variable for tracking the latest
fine-grained timestamp handed out. Because it's a global, track the
number of times that a new floor value is assigned.
Add a new percpu counter to the timekeeping code to track the number of
floor swap events that have occurred. A later patch will add a debugfs
file to display this counter alongside other stats involving multigrain
timestamps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Link: https://lore.kernel.org/all/20241002-mgtime-v10-2-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Multigrain timestamps allow the kernel to use fine-grained timestamps when
an inode's attributes is being actively observed via ->getattr(). With
this support, it's possible for a file to get a fine-grained timestamp, and
another modified after it to get a coarse-grained stamp that is earlier
than the fine-grained time. If this happens then the files can appear to
have been modified in reverse order, which breaks VFS ordering guarantees
[1].
To prevent this, maintain a floor value for multigrain timestamps.
Whenever a fine-grained timestamp is handed out, record it, and when later
coarse-grained stamps are handed out, ensure they are not earlier than that
value. If the coarse-grained timestamp is earlier than the fine-grained
floor, return the floor value instead.
Add a static singleton atomic64_t into timekeeper.c that is used to keep
track of the latest fine-grained time ever handed out. This is tracked as a
monotonic ktime_t value to ensure that it isn't affected by clock
jumps. Because it is updated at different times than the rest of the
timekeeper object, the floor value is managed independently of the
timekeeper via a cmpxchg() operation, and sits on its own cacheline.
Add two new public interfaces:
- ktime_get_coarse_real_ts64_mg() fills a timespec64 with the later of the
coarse-grained clock and the floor time
- ktime_get_real_ts64_mg() gets the fine-grained clock value, and tries
to swap it into the floor. A timespec64 is filled with the result.
The floor value is global and updated via a single try_cmpxchg(). If
that fails then the operation raced with a concurrent update. Any
concurrent update must be later than the existing floor value, so any
racing tasks can accept any resulting floor value without retrying.
[1]: POSIX requires that files be stamped with realtime clock values, and
makes no provision for dealing with backward clock jumps. If a backward
realtime clock jump occurs, then files can appear to have been modified
in reverse order.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241002-mgtime-v10-1-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if
necessary") initializes deferred I/O only if it is used.
drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup()
unconditionally with struct fb_info.fbdefio == NULL. KASAN with the
out-of-tree Apple silicon display driver posts following warning from
__flush_work() of a random struct work_struct instead of the expected
NULL pointer derefs.
[ 22.053799] ------------[ cut here ]------------
[ 22.054832] WARNING: CPU: 2 PID: 1 at kernel/workqueue.c:4177 __flush_work+0x4d8/0x580
[ 22.056597] Modules linked in: uhid bnep uinput nls_ascii ip6_tables ip_tables i2c_dev loop fuse dm_multipath nfnetlink zram hid_magicmouse btrfs xor xor_neon brcmfmac_wcc raid6_pq hci_bcm4377 bluetooth brcmfmac hid_apple brcmutil nvmem_spmi_mfd simple_mfd_spmi dockchannel_hid cfg80211 joydev regmap_spmi nvme_apple ecdh_generic ecc macsmc_hid rfkill dwc3 appledrm snd_soc_macaudio macsmc_power nvme_core apple_isp phy_apple_atc apple_sart apple_rtkit_helper apple_dockchannel tps6598x macsmc_hwmon snd_soc_cs42l84 videobuf2_v4l2 spmi_apple_controller nvmem_apple_efuses videobuf2_dma_sg apple_z2 videobuf2_memops spi_nor panel_summit videobuf2_common asahi videodev pwm_apple apple_dcp snd_soc_apple_mca apple_admac spi_apple clk_apple_nco i2c_pasemi_platform snd_pcm_dmaengine mc i2c_pasemi_core mux_core ofpart adpdrm drm_dma_helper apple_dart apple_soc_cpufreq leds_pwm phram
[ 22.073768] CPU: 2 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.11.2-asahi+ #asahi-dev
[ 22.075612] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 22.077032] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 22.078567] pc : __flush_work+0x4d8/0x580
[ 22.079471] lr : __flush_work+0x54/0x580
[ 22.080345] sp : ffffc000836ef820
[ 22.081089] x29: ffffc000836ef880 x28: 0000000000000000 x27: ffff80002ddb7128
[ 22.082678] x26: dfffc00000000000 x25: 1ffff000096f0c57 x24: ffffc00082d3e358
[ 22.084263] x23: ffff80004b7862b8 x22: dfffc00000000000 x21: ffff80005aa1d470
[ 22.085855] x20: ffff80004b786000 x19: ffff80004b7862a0 x18: 0000000000000000
[ 22.087439] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000005
[ 22.089030] x14: 1ffff800106ddf0a x13: 0000000000000000 x12: 0000000000000000
[ 22.090618] x11: ffffb800106ddf0f x10: dfffc00000000000 x9 : 1ffff800106ddf0e
[ 22.092206] x8 : 0000000000000000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000001
[ 22.093790] x5 : ffffc000836ef728 x4 : 0000000000000000 x3 : 0000000000000020
[ 22.095368] x2 : 0000000000000008 x1 : 00000000000000aa x0 : 0000000000000000
[ 22.096955] Call trace:
[ 22.097505] __flush_work+0x4d8/0x580
[ 22.098330] flush_delayed_work+0x80/0xb8
[ 22.099231] fb_deferred_io_cleanup+0x3c/0x130
[ 22.100217] drm_fbdev_dma_fb_destroy+0x6c/0xe0 [drm_dma_helper]
[ 22.101559] unregister_framebuffer+0x210/0x2f0
[ 22.102575] drm_fb_helper_unregister_info+0x48/0x60
[ 22.103683] drm_fbdev_dma_client_unregister+0x4c/0x80 [drm_dma_helper]
[ 22.105147] drm_client_dev_unregister+0x1cc/0x230
[ 22.106217] drm_dev_unregister+0x58/0x570
[ 22.107125] apple_drm_unbind+0x50/0x98 [appledrm]
[ 22.108199] component_del+0x1f8/0x3a8
[ 22.109042] dcp_platform_shutdown+0x24/0x38 [apple_dcp]
[ 22.110357] platform_shutdown+0x70/0x90
[ 22.111219] device_shutdown+0x368/0x4d8
[ 22.112095] kernel_restart+0x6c/0x1d0
[ 22.112946] __arm64_sys_reboot+0x1c8/0x328
[ 22.113868] invoke_syscall+0x78/0x1a8
[ 22.114703] do_el0_svc+0x124/0x1a0
[ 22.115498] el0_svc+0x3c/0xe0
[ 22.116181] el0t_64_sync_handler+0x70/0xc0
[ 22.117110] el0t_64_sync+0x190/0x198
[ 22.117931] ---[ end trace 0000000000000000 ]---
Signed-off-by: Janne Grunau <j@jannau.net>
Fixes: 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ZwLNuZL-8Gh5UUQb@robin
|
|
Got following report when doing overlay_test:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /kunit-test
OF: ERROR: memory leak before free overlay changeset, /kunit-test
In of_overlay_apply_kunit_cleanup(), the "np" should be associated with
fake instead of test to call of_node_put(), so the node is put before
the overlay is removed.
It also fix the following memory leaks:
unreferenced object 0xffffff80c7d22800 (size 256):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
d0 26 d4 c2 80 ff ff ff 00 00 00 00 00 00 00 00 .&..............
60 19 75 c1 80 ff ff ff 00 00 00 00 00 00 00 00 `.u.............
backtrace (crc ee0a471c):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000119f34f3>] __of_node_dup+0x4c/0x328
[<00000000b212ca39>] build_changeset_next_level+0x2cc/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c1751960 (size 16):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 16 bytes):
6b 75 6e 69 74 2d 74 65 73 74 00 c1 80 ff ff ff kunit-test......
backtrace (crc 18196259):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<0000000071006e2c>] __kmalloc_node_track_caller_noprof+0x300/0x3e0
[<00000000b16ac6cb>] kstrdup+0x48/0x84
[<0000000050e3373b>] __of_node_dup+0x60/0x328
[<00000000b212ca39>] build_changeset_next_level+0x2cc/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c2e96e00 (size 192):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
80 19 75 c1 80 ff ff ff 0b 00 00 00 00 00 00 00 ..u.............
a0 19 75 c1 80 ff ff ff 00 6f e9 c2 80 ff ff ff ..u......o......
backtrace (crc 1924cba4):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000009fdd35ad>] __of_prop_dup+0x7c/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c1751980 (size 16):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 16 bytes):
63 6f 6d 70 61 74 69 62 6c 65 00 c1 80 ff ff ff compatible......
backtrace (crc 42df3c87):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<0000000071006e2c>] __kmalloc_node_track_caller_noprof+0x300/0x3e0
[<00000000b16ac6cb>] kstrdup+0x48/0x84
[<00000000a8888fd8>] __of_prop_dup+0xb0/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
unreferenced object 0xffffff80c2e96f00 (size 192):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
40 f7 bb c6 80 ff ff ff 0b 00 00 00 00 00 00 00 @...............
c0 19 75 c1 80 ff ff ff 00 00 00 00 00 00 00 00 ..u.............
backtrace (crc f2f57ea7):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000009fdd35ad>] __of_prop_dup+0x7c/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
......
How to reproduce:
CONFIG_OF_OVERLAY_KUNIT_TEST=y, CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, launch the kernel.
Fixes: 5c9dd72d8385 ("of: Add a KUnit test for overlays and test managed APIs")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20241010034416.2324196-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-10-08 (ice, i40e, igb, e1000e)
This series contains updates to ice, i40e, igb, and e1000e drivers.
For ice:
Marcin allows driver to load, into safe mode, when DDP package is
missing or corrupted and adjusts the netif_is_ice() check to
account for when the device is in safe mode. He also fixes an
out-of-bounds issue when MSI-X are increased for VFs.
Wojciech clears FDB entries on reset to match the hardware state.
For i40e:
Aleksandr adds locking around MACVLAN filters to prevent memory leaks
due to concurrency issues.
For igb:
Mohamed Khalfella adds a check to not attempt to bring up an already
running interface on non-fatal PCIe errors.
For e1000e:
Vitaly changes board type for I219 to more closely match the hardware
and stop PHY issues.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: change I219 (19) devices to ADP
igb: Do not bring the device up after non-fatal error
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
ice: Fix increasing MSI-X on VF
ice: Flush FDB entries before reset
ice: Fix netif_is_ice() in Safe Mode
ice: Fix entering Safe Mode
====================
Link: https://patch.msgid.link/20241008230050.928245-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 38aa3f5ac6d2 ("integrity: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct evm_ima_xattr_data_hdr` and
`struct ima_digest_data_hdr`. We want to ensure that when new members
need to be added to the flexible structures, they are always included
within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The EVM_NEW_FILE flag is unset if the file already existed at the time
of open and this can be checked without looking at i_writecount.
Not accessing it reduces traffic on the cacheline during parallel open
of the same file and drop the evm_file_release routine from second place
to bottom of the profile.
Fixes: 75a323e604fc ("evm: Make it independent from 'integrity' LSM")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Function ima_eventdigest_init() calls ima_eventdigest_init_common()
with HASH_ALGO__LAST which is then used to access the array
hash_digest_size[] leading to buffer overrun. Have a conditional
statement to handle this.
Fixes: 9fab303a2cb3 ("ima: fix violation measurement list record")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Tested-by: Enrico Bravi (PhD at polito.it) <enrico.bravi@huawei.com>
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Matthieu Baerts says:
====================
mptcp: misc. fixes involving fallback to TCP
- Patch 1: better handle DSS corruptions from a bugged peer: reducing
warnings, doing a fallback or a reset depending on the subflow state.
For >= v5.7.
- Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was
not taken into account. For >= v5.6.
- Patch 3: fallback when MPTCP opts are dropped after the first data
packet, instead of resetting the connection. For >= v5.6.
- Patch 4: restrict the removal of a subflow to other closing states, a
better fix, for a recent one. For >= v5.10.
====================
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-0-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e4b ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes: dea2b1ea9c70 ("mptcp: do not reset MP_CAPABLE subflow on mapping errors")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2]
Link: https://github.com/multipath-tcp/packetdrill [3]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4]
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-3-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
move_skbs_to_msk net/mptcp/protocol.c:811 [inline]
mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854
subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490
tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283
tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5662 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6107
__napi_poll+0xcb/0x490 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6962
handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451
dev_queue_xmit include/linux/netdevice.h:3094 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline]
tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752
__tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015
tcp_push_pending_frames include/net/tcp.h:2107 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline]
tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
sk_backlog_rcv include/net/sock.h:1113 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3072
release_sock+0x61/0x1f0 net/core/sock.c:3626
mptcp_push_release net/mptcp/protocol.c:1486 [inline]
__mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625
mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603
___sys_sendmsg net/socket.c:2657 [inline]
__sys_sendmsg+0x2aa/0x390 net/socket.c:2686
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb06e9317f9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406
R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003
</TASK>
Additionally syzkaller provided a nice reproducer. The repro enables
pmtu on the loopback device, leading to tcp_mtu_probe() generating
very large probe packets.
tcp_can_coalesce_send_queue_head() currently does not check for
mptcp-level invariants, and allowed the creation of cross-DSS probes,
leading to the mentioned corruption.
Address the issue teaching tcp_can_coalesce_send_queue_head() about
mptcp using the tcp_skb_can_collapse(), also reducing the code
duplication.
Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Cc: stable@vger.kernel.org
Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-2-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A warning is triggered when there is insufficient space in the buffer
for userdata. However, this is not an issue since userdata will be sent
in the next iteration.
Current warning message:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
The code incorrectly issues a warning when this_chunk is zero, which is
a valid scenario. The warning should only be triggered when this_chunk
is negative.
Fixes: 1ec9daf95093 ("net: netconsole: append userdata to fragmented netconsole messages")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008094325.896208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of a tc mirred action from one switch to another, the behavior
is not correct. We simply tell the source switch driver to program a
mirroring entry towards mirror->to_local_port = to_dp->index, but it is
not even guaranteed that the to_dp belongs to the same switch as dp.
For proper cross-chip support, we would need to go through the
cross-chip notifier layer in switch.c, program the entry on cascade
ports, and introduce new, explicit API for cross-chip mirroring, given
that intermediary switches should have introspection into the DSA tags
passed through the cascade port (and not just program a port mirror on
the entire cascade port). None of that exists today.
Reject what is not implemented so that user space is not misled into
thinking it works.
Fixes: f50f212749e8 ("net: dsa: Add plumbing for port mirroring")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241008094320.3340980-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
