| Age | Commit message (Collapse) | Author |
|---|
|
Under some circumstances, the IPMI state machine could return
a call without delay option but the driver would still do a long
delay because the result wasn't checked. Instead of calling
the state machine after transaction done, just go back to the
top of the processing to start over.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Several were tryacpi instead of their actual values.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
There was a mistake in the logic, if an alert came in very quickly
it would hang the driver.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
linux-next has been reporting gazillion warnings for ARC build and
I finally decided to take a bite:
http://kisskb.ellerman.id.au/kisskb/buildresult/12638735/
Most of the them are due to -Wmaybe-uninitialized
| ../kernel/sysctl.c: In function '__do_proc_doulongvec_minmax':
| ../kernel/sysctl.c:1928:12: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
| ret = tmp - *buf;
| ^
| ../kernel/sysctl.c:2342:29: note: 'p' was declared here
| char *kbuf = NULL, *p;
| ^
| ...
| ...
Cursory look at code seemed fine and a definite gcc false positive in say
kernel/sysctl.c
Mystery was why only for ARC (and not with ARM linaro toolchain based
off same gcc 4.8). Turns out that -O3 (default for ARC) triggers these
and if I enable -O3 for ARM kernel build, I see the same splat.
I initially wanted to disable this only for gcc 4.8, but Arnd reported
it is seen even on gcc 6.0 for ARM with -O3. Thus better to disable
this independent of gcc version.
Cc: Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
[wsa: Thanks a lot! He has some good stuff in the queue :)]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
It is impossible to wake-up on card detect event because when sdhci
controller is runtime suspended, it is assumed that all clocks are
disabled so we can't get irqs.
If the device is removable and there is no gpio to manage the card
detection then polling is used. It doesn't mean card detection is broken.
It is curently we only way to wake-up on card event if using runtime pm.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
DMA mask will already be set by sdhci_set_dma_mask(), which
is equivalent to the removed code since pci_set_dma_mask()
expands to its DMA-API counterpart.
There should also be no reason to set the DMA mask after probe.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This hook was solely used to set the DMA mask, which is now done
by the newly-added sdhci_set_dma_mask() function.
The use of a flag to ensure the mask is only set once is a strong hint
that it should not have been done there anyway.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Set the DMA mask in sdhci_add_host() after we determined the
capabilities of the device. 64-bit devices in particular are given the
proper mask that ensures bounce buffers are not used.
Also disable DMA if no proper DMA mask can be set, as the DMA-API
documentation specifies.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In some cases, platform thermal driver may report invalid trip points,
thermal core should not take any action for these trip points.
This fixed a regression that bogus trip point starts to screw up thermal
control on some Lenovo laptops, after
commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Oct 30 16:31:47 2015 +0800
Thermal: initialize thermal zone device correctly
After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().
Both thermal core framework and step_wise governor is
enhanced to handle this. And since the step_wise governor
is the only one that uses trends, so it's the only thermal
governor that needs to be updated.
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: szegad <szegadlo@poczta.onet.pl>
Tested-by: prash <prash.n.rao@gmail.com>
Tested-by: amish <ammdispose-arch@yahoo.com>
Tested-by: Matthias <morpheusxyz123@yahoo.de>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
CC: <stable@vger.kernel.org> #3.18+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 4.6-rc1.
Lots of little things here, over 1600 patches or so. Notable is all
of the good Lustre work happening, those developers have finally woken
up and are cleaning up their code greatly. The Outreachy intern
application process is also happening, which brought in another 400 or
so patches. Full details are in the very long shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
staging: lustre: fix aligments in lnet selftest
staging: lustre: report minimum of two buffers for LNet selftest load test
staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
staging: lustre: filter remaining extra spacing for lnet selftest
staging: lustre: remove extra spacing when setting variable for lnet selftest
staging: lustre: remove extra spacing of variable declartions for lnet selftest
staging: lustre: fix spacing issues checkpatch reported in lnet selftest
staging: lustre: remove returns in void function for lnet selftest
staging: lustre: fix bogus lst errors for lnet selftest
staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
staging: android: ion: fix up file mode
staging: ion: debugfs invalid gfp mask
staging: rts5208: Replace pci_enable_device with pcim_enable_device
Staging: ieee80211: Place constant on right side of the test.
staging: speakup: Replace del_timer with del_timer_sync
staging: lowmemorykiller: fix 2 checks that checkpatch complained
staging: mt29f_spinand: Drop void pointer cast
staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"The most notable item is addition of support for Synaptics RMI4
protocol which is native protocol for all current Synaptics devices
(touchscreens, touchpads). In later releases we'll switch devices
using HID and PS/2 protocol emulation to RMI4.
You will also get:
- BYD PS/2 touchpad protocol support for psmouse
- MELFAS MIP4 Touchscreen driver
- rotary encoder was moved away from legacy platform data and to
generic device properties API, devm_* API, and can now handle
encoders using more than 2 GPIOs
- Cypress touchpad driver was switched to devm_* API and device
properties
- other assorted driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props
Input: synaptics-rmi4 - using logical instead of bitwise AND
Input: powermate - fix oops with malicious USB descriptors
Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle()
MAINTAINERS: add devicetree bindings to Input Drivers section
Input: synaptics-rmi4 - add device tree support to the SPI transport driver
Input: synaptics-rmi4 - add SPI transport driver
Input: synaptics-rmi4 - add support for F30
Input: synaptics-rmi4 - add support for F12
Input: synaptics-rmi4 - add device tree support for 2d sensors and F11
Input: synaptics-rmi4 - add support for 2D sensors and F11
Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices
Input: synaptics-rmi4 - add I2C transport driver
Input: synaptics-rmi4 - add support for Synaptics RMI4 devices
Input: ad7879 - add device tree support
Input: ad7879 - fix default x/y axis assignment
Input: ad7879 - move header to platform_data directory
Input: ts4800 - add hardware dependency
Input: cyapa - fix for losing events during device power transitions
Input: sh_keysc - remove dependency on SUPERH
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching update from Jiri Kosina:
- cleanup of module notifiers; this depends on a module.c cleanup which
has been acked by Rusty; from Jessica Yu
- small assorted fixes and MAINTAINERS update
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch/module: remove livepatch module notifier
modules: split part of complete_formation() into prepare_coming_module()
livepatch: Update maintainers
livepatch: Fix the error message about unresolvable ambiguity
klp: remove CONFIG_LIVEPATCH dependency from klp headers
klp: remove superfluous errors in asm/livepatch.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
drivers/rtc: broken link fix
drm/i915 Fix typos in i915_gem_fence.c
Docs: fix missing word in REPORTING-BUGS
lib+mm: fix few spelling mistakes
MAINTAINERS: add git URL for APM driver
treewide: Fix typo in printk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- functionally equivalent cleanups for wacom driver, making the code
more readable, from Benjamin Tissoires
- a bunch of improvements and fixes for thingm driver from Heiner
Kallweit
- bugfixes to out-of-bound access for generic parsing functions (which
have been there since ever) extract() and implement(), from Dmitry
Torokhov
- a lot of added / improved device support in sony, wacom, microsoft,
multitouch and logitech driver, from various people
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (44 commits)
HID: microsoft: Add ID for MS Wireless Comfort Keyboard
hid: thingm: reorder calls in thingm_probe
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()
HID: multitouch: Release all touch slots on reset_resume
HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2
HID: penmount: report only one button for PenMount 6000 USB touchscreen controller
HID: i2c-hid: Fix suspend/resume when already runtime suspended
HID: i2c-hid: Add hid-over-i2c name to i2c id table
HID: multitouch: force retrieving of Win8 signature blob
HID: Support for CMedia CM6533 HID audio jack controls
HID: thingm: improve locking
HID: thingm: switch to managed version of led_classdev_register
HID: thingm: remove workqueue
HID: corsair: fix mapping of non-keyboard usages
HID: wacom: close the wireless receiver on remove()
HID: wacom: cleanup input devices
HID: wacom: reuse wacom_parse_and_register() in wireless_work
HID: wacom: move down wireless_work()
HID: wacom: break out parsing of device and registering of input
HID: wacom: break out wacom_intuos_get_tool_type
...
|
|
If many threads calls fsync with data writes, we don't need to flush every
bios having node page writes.
The f2fs_wait_on_page_writeback will flush its bios when the page is really
needed.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The f2fs_setxattr() prototype for CONFIG_F2FS_FS_XATTR=n has
been wrong for a long time, since 8ae8f1627f39 ("f2fs: support
xattr security labels"), but there have never been any callers,
so it did not matter.
Now, the function gets called from f2fs_ioc_keyctl(), which
causes a build failure:
fs/f2fs/file.c: In function 'f2fs_ioc_keyctl':
include/linux/stddef.h:7:14: error: passing argument 6 of 'f2fs_setxattr' makes integer from pointer without a cast [-Werror=int-conversion]
#define NULL ((void *)0)
^
fs/f2fs/file.c:1599:27: note: in expansion of macro 'NULL'
value, F2FS_KEY_SIZE, NULL, type);
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: expected 'int' but argument is of type 'void *'
static inline int f2fs_setxattr(struct inode *inode, int index,
^
fs/f2fs/file.c:1597:9: error: too many arguments to function 'f2fs_setxattr'
return f2fs_setxattr(inode, F2FS_XATTR_INDEX_KEY,
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: declared here
static inline int f2fs_setxattr(struct inode *inode, int index,
Thsi changes the prototype of the empty stub function to match
that of the actual implementation. This will not make the key
management work when F2FS_FS_XATTR is disabled, but it gets it
to build at least.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
During ->lookup, I_NEW state of inode was been cleared in f2fs_iget,
so in error path, we don't need to clear it again.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Just clean up opened code with existing function, no logic change.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Just to avoid sparse warnings.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The crc function is done bit by bit.
Optimize this by use cryptoapi
crc32 function which is backed by h/w acceleration.
Signed-off-by: Keith Mok <ek9852@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
ra_node_page() is used to read ahead one node page. Comparing to regular
read, it's faster because it doesn't wait for IO completion.
But if it is called twice for reading the same block, and the IO request
from the first call hasn't been completed before the second call, the second
call will have to wait until the read is over.
Here use the code in __do_page_cache_readahead() to solve this problem.
It does nothing when someone else already puts the page in mapping. The
status of page should be assured by whoever puts it there.
This implement also prevents alteration of page reference count.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch tries to catch up with lookup and open policies in ext4.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel v4.6. There is quite a
lot of interesting stuff going on.
The patches to other subsystems and arch-wide are ACKed as far as
possible, though I consider things like per-arch <asm/gpio.h> as
essentially a part of the GPIO subsystem so it should not be needed.
Core changes:
- The gpio_chip is now a *real device*. Until now the gpio chips
were just piggybacking the parent device or (gasp) floating in
space outside of the device model.
We now finally make GPIO chips devices. The gpio_chip will create
a gpio_device which contains a struct device, and this gpio_device
struct is kept private. Anything that needs to be kept private
from the rest of the kernel will gradually be moved over to the
gpio_device.
- As a result of making the gpio_device a real device, we have added
resource management, so devm_gpiochip_add_data() will cut down on
overhead and reduce code lines. A huge slew of patches convert
almost all drivers in the subsystem to use this.
- Building on making the GPIO a real device, we add the first step of
a new userspace ABI: the GPIO character device. We take small
steps here, so we first add a pure *information* ABI and the tool
"lsgpio" that will list all GPIO devices on the system and all
lines on these devices.
We can now discover GPIOs properly from userspace. We still have
not come up with a way to actually *use* GPIOs from userspace.
- To encourage people to use the character device for the future, we
have it always-enabled when using GPIO. The old sysfs ABI is still
opt-in (and can be used in parallel), but is marked as deprecated.
We will keep it around for the foreseeable future, but it will not
be extended to cover ever more use cases.
Cleanup:
- Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
includes.
This dates back to when GPIO was an opt-in feature and no shared
library even existed: just a header file with proper prototypes was
provided and all semantics were up to the arch to implement. These
patches make the GPIO chip even more a proper device and cleans out
leftovers of the old in-kernel API here and there.
Still some cruft is left but it's very little now.
- There is still some clamping of return values for .get() going on,
but we now return sane values in the vast majority of drivers and
the errorpath is sanitized. Some patches for powerpc, blackfin and
unicore still drop in.
- We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
implementations to use gpiochip_add_data() and cut down on code
lines.
- MPC8xxx is converted to use the generic GPIO helpers.
- ATH79 is converted to use the generic GPIO helpers.
New drivers:
- WinSystems WS16C48
- Acces 104-DIO-48E
- F81866 (a F7188x variant)
- Qoric (a MPC8xxx variant)
- TS-4800
- SPI serializers (pisosr): simple 74xx shift registers connected to
SPI to obtain a dirt-cheap output-only GPIO expander.
- Texas Instruments TPIC2810
- Texas Instruments TPS65218
- Texas Instruments TPS65912
- X-Gene (ARM64) standby GPIO controller"
* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
Revert "Share upstreaming patches"
gpio: mcp23s08: Fix clearing of interrupt.
gpiolib: Fix comment referring to gpio_*() in gpiod_*()
gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
gpio: xgene: Fix kconfig for standby GIPO contoller
gpio: Add generic serializer DT binding
gpio: uapi: use 0xB4 as ioctl() major
gpio: tps65912: fix bad merge
Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
gpio: omap: drop dev field from gpio_bank structure
gpio: mpc8xxx: Slightly update the code for better readability
gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
gpio: mpc8xxx: Fixup setting gpio direction output
gpio: mcp23s08: Add support for mcp23s18
dt-bindings: gpio: altera: Fix altr,interrupt-type property
gpio: add driver for MEN 16Z127 GPIO controller
gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
gpio: timberdale: Switch to devm_ioremap_resource()
gpio: ts4800: Add IMX51 dependency
gpiolib: rewrite gpiodev_add_to_list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"The main change is the removal of the bit-rotten 68360 support. Also
a fix to always make the ethernet FEC platform info available"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: remove obsolete 68360 support
m68knommu: fix FEC platform device registration when driver is modular
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Here are the main arm64 updates for 4.6. There are some relatively
intrusive changes to support KASLR, the reworking of the kernel
virtual memory layout and initial page table creation.
Summary:
- Initial page table creation reworked to avoid breaking large block
mappings (huge pages) into smaller ones. The ARM architecture
requires break-before-make in such cases to avoid TLB conflicts but
that's not always possible on live page tables
- Kernel virtual memory layout: the kernel image is no longer linked
to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom
of the vmalloc space, allowing the kernel to be loaded (nearly)
anywhere in physical RAM
- Kernel ASLR: position independent kernel Image and modules being
randomly mapped in the vmalloc space with the randomness is
provided by UEFI (efi_get_random_bytes() patches merged via the
arm64 tree, acked by Matt Fleming)
- Implement relative exception tables for arm64, required by KASLR
(initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c
but actual x86 conversion to deferred to 4.7 because of the merge
dependencies)
- Support for the User Access Override feature of ARMv8.2: this
allows uaccess functions (get_user etc.) to be implemented using
LDTR/STTR instructions. Such instructions, when run by the kernel,
perform unprivileged accesses adding an extra level of protection.
The set_fs() macro is used to "upgrade" such instruction to
privileged accesses via the UAO bit
- Half-precision floating point support (part of ARMv8.2)
- Optimisations for CPUs with or without a hardware prefetcher (using
run-time code patching)
- copy_page performance improvement to deal with 128 bytes at a time
- Sanity checks on the CPU capabilities (via CPUID) to prevent
incompatible secondary CPUs from being brought up (e.g. weird
big.LITTLE configurations)
- valid_user_regs() reworked for better sanity check of the
sigcontext information (restored pstate information)
- ACPI parking protocol implementation
- CONFIG_DEBUG_RODATA enabled by default
- VDSO code marked as read-only
- DEBUG_PAGEALLOC support
- ARCH_HAS_UBSAN_SANITIZE_ALL enabled
- Erratum workaround Cavium ThunderX SoC
- set_pte_at() fix for PROT_NONE mappings
- Code clean-ups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits)
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Fix misspellings in comments.
arm64: efi: add missing frame pointer assignment
arm64: make mrs_s prefixing implicit in read_cpuid
arm64: enable CONFIG_DEBUG_RODATA by default
arm64: Rework valid_user_regs
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: KVM: Move kvm_call_hyp back to its original localtion
arm64: mm: treat memstart_addr as a signed quantity
arm64: mm: list kernel sections in order
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR
arm64: kconfig: add submenu for 8.2 architectural features
arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot
arm64: Add support for Half precision floating point
arm64: Remove fixmap include fragility
arm64: Add workaround for Cavium erratum 27456
arm64: mm: Mark .rodata as RO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update for Kselftest adds:
- A new feature to create test-specific kconfig fragments. This
feature helps configure Kselftests to test specific Kernel
Configuration options as opposed to defconfig.
- A new test for Media Controller API
- A few fixes"
* tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: media_dcevice_test fix usage information
selftests: media_dcevice_test fix to handle ioctl failure case
selftests: add missing .gitignore file or entry
Makefile: add kselftest-merge
selftests: create test-specific kconfig fragments
selftests: breakpoint: add step_after_suspend_test
selftests: add a new test for Media Controller API
|
|
Added support for Gemalto's Cinterion PHxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
PHxx can have:
2 RmNet Interfaces (PID 0x0082) or
1 RmNet + 1 USB Audio interface (PID 0x0083).
Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.
We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.
If this race happens, the ICMP will do nothing special.
Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Lazarus <blazarus@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vlan drivers lack proper propagation of gso_max_segs from
lower device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kmalloc can fail and we should check for NULL before using the pointer
returned by kmalloc.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The perf tool is missing the setup of translation window. Adding call to
setup the translation window for backed memory.
Signed-off-by: John Kading <john.kading@gd-ms.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The function, cpufreq_quick_get, accesses the global 'cpufreq_driver' and
its fields without taking the associated lock, cpufreq_driver_lock.
Without the locking, nothing guarantees that 'cpufreq_driver' remains
consistent during the call. This patch fixes the issue by taking the lock
before accessing the data structure.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of keep trying to go through the init routine when we aren't able
to allocate memory, we should just stop and go down.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
We can leave tasklet spinning forever if we disable the tasklet during
qp shutdown and the tasklets are still being kicked off. This hopefully
should avoid that race condition.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Alex Depoutovitch <alex@pernixdata.com>
Tested-by: Alex Depoutovitch <alex@pernixdata.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The ntb driver assigns between pointers an __iomem tokens, and
also casts them to 64-bit integers, which results in compiler
warnings on 32-bit systems:
drivers/ntb/test/ntb_perf.c: In function 'perf_copy':
drivers/ntb/test/ntb_perf.c:213:10: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
vbase = (u64)(u64 *)mw->vbase;
^
drivers/ntb/test/ntb_perf.c:214:14: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
dst_vaddr = (u64)(u64 *)dst;
^
This adds __iomem annotations where needed and changes the temporary
variables to iomem pointers to avoid casting them to u64. I did not
see the problem in linux-next earlier, but it show showed up in
4.5-rc1.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a778a85 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Looks like the fimware 8.2 still has the extra buttons spurious release
bug.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Originally the irq_mask member of rmi_function was a pointer. Then it was
switched to being a zero length array. However, the checks for a NULL
pointer where not removed.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Windows driver's settings dialog contains a visualization of the
regions for the hardware edge scrolling capability, which uses a
temporarily-enabled limited-resolution absolute mode.
This patch enables this during normal operation, and combines the
absolute packets with the existing relative packets to provide
accurate absolute position and touch reporting.
It also adds documentation for all known gesture packets and
initialization commands.
Reviewed-by: Chris Diamand <chris@diamand.org>
Signed-off-by: Richard Pospesel <pospeselr@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull pstore update from Tony Luck:
"Allow ram backend to be configured with addresses above 4GB"
* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: Add support for 64 Bit address space
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We only have six patches ready for this merge window:
- Arnd Bergmann contributed a patch that fixes an uninitialized
variable warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct
IO write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being
reused to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be
needed, and which interfered with the transition of dinodes from
unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not
needed"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Eliminate parameter non_block on gfs2_inode_lookup
GFS2: Don't filter out I_FREEING inodes anymore
GFS2: Prevent delete work from occurring on glocks used for create
GFS2: Fix direct IO write rounding error
gfs2: avoid uninitialized variable warning
GFS2: Check if iopen is held when deleting inode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"Previous changes introduced the use of socket error reporting for dlm
sockets. This set includes two fixes in how the socket error
callbacks are used"
* tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
DLM: Save and restore socket callbacks properly
DLM: Replace nodeid_to_addr with kernel_getpeername
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Performance improvements in SEEK_DATA and xattr scalability
improvements, plus a lot of clean ups and bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits)
ext4: clean up error handling in the MMP support
jbd2: do not fail journal because of frozen_buffer allocation failure
ext4: use __GFP_NOFAIL in ext4_free_blocks()
ext4: fix compile error while opening the macro DOUBLE_CHECK
ext4: print ext4 mount option data_err=abort correctly
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry()
ext4: fix misspellings in comments.
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
ext4: more efficient SEEK_DATA implementation
ext4: cleanup handling of bh->b_state in DAX mmap
ext4: return hole from ext4_map_blocks()
ext4: factor out determining of hole size
ext4: fix setting of referenced bit in ext4_es_lookup_extent()
ext4: remove i_ioend_count
ext4: simplify io_end handling for AIO DIO
ext4: move trans handling and completion deferal out of _ext4_get_block
ext4: rename and split get blocks functions
ext4: use i_mutex to serialize unaligned AIO DIO
ext4: pack ioend structure better
...
|
|
Pull configfs updates from Christoph Hellwig:
- A large patch from me to simplify setting up the list of default
groups by actually implementing it as a list instead of an array.
- a small Y2083 prep patch from Deepa Dinamani. Probably doesn't
matter on it's own, but it seems like he is trying to get rid of all
CURRENT_TIME uses in file systems, which is a worthwhile goal.
* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
configfs: switch ->default groups to a linked list
configfs: Replace CURRENT_TIME by current_fs_time()
|
|
Implement basic character sets for the '%[' conversion specifier.
The '%[' conversion specifier matches a nonempty sequence of characters
from the specified set of accepted (or with '^', rejected) characters
between the brackets. The substring matched is to be made up of
characters in (or not in) the set. This is useful for matching
substrings that are delimited by something other than spaces.
This implementation differs from its glibc counterpart in the following ways:
(1) No support for character ranges (e.g., 'a-z' or '0-9')
(2) The hyphen '-' is not a special character
(3) The closing bracket ']' cannot be matched
(4) No support (yet) for discarding matching input ('%*[')
The bitmap code is largely based upon sample code which was provided by
Rasmus.
The motivation for adding character set support to sscanf originally
stemmed from the kernel livepatching project. An ongoing patchset
utilizes new livepatch Elf symbol and section names to store important
metadata livepatch needs to properly apply its patches. Such metadata
is stored in these section and symbol names as substrings delimited by
periods '.' and commas ','. For example, a livepatch symbol name might
look like this:
.klp.sym.vmlinux.printk,0
However, sscanf currently can only extract "substrings" delimited by
whitespace using the "%s" specifier. Thus for the above symbol name,
one cannot not use sscanf() to extract substrings "vmlinux" or
"printk", for example. A number of discussions on the livepatch
mailing list dealing with string parsing code for extracting these '.'
and ',' delimited substrings eventually led to the conclusion that such
code would be completely unnecessary if the kernel sscanf() supported
character sets. Thus only a single sscanf() call would be necessary to
extract these substrings. In addition, such an addition to sscanf()
could benefit other areas of the kernel that might have a similar need
in the future.
[akpm@linux-foundation.org: 80-col tweaks]
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The traceoff_on_warning option doesn't have any effect on s390, powerpc,
arm64, parisc, and sh because there are two different types of WARN
implementations:
1) The above mentioned architectures treat WARN() as a special case of a
BUG() exception. They handle warnings in report_bug() in lib/bug.c.
2) All other architectures just call warn_slowpath_*() directly. Their
warnings are handled in warn_slowpath_common() in kernel/panic.c.
Support traceoff_on_warning on all architectures and prevent any future
divergence by using a single common function to emit the warning.
Also remove the '()' from '%pS()', because the parentheses look funky:
[ 45.607629] WARNING: at /root/warn_mod/warn_mod.c:17 .init_dummy+0x20/0x40 [warn_mod]()
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This changes several users of manual "on"/"off" parsing to use
strtobool.
Some side-effects:
- these uses will now parse y/n/1/0 meaningfully too
- the early_param uses will now bubble up parse errors
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Perches <joe@perches.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for "on" and "off" when converting to boolean.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
