summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-12wifi: cfg80211: add support for link id attribute in NL80211_CMD_DEL_STATIONAditya Kumar Singh
Currently whenever NL80211_CMD_DEL_STATION command is called without any MAC address, all stations present on that interface are flushed. However with MLO there is a need to flush such stations only which are using at least a particular link from the AP MLD interface. For example - 2 GHz and 5 GHz are part of an AP MLD. To this interface, following stations are connected - 1. One non-EHT STA on 2 GHz link. 2. One non-EHT STA on 5 GHz link. 3. One Multi-Link STA having 2 GHz and 5 GHz as active links. Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link without any MAC address, it would flush all station entries. However, flushing of station entry #2 at least is not desireable since it is connected to 5 GHz link alone. Hence, add an option to pass link ID as well in the command so that if link ID is passed, stations using that passed link ID alone would be flushed and others will not. So after this, station entries #1 and #3 alone would be flushed and #2 will remain as it is. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com [clarify documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: mac80211: remove gfp parameter from ieee80211_obss_color_collision_notifyLorenzo Bianconi
Get rid of gfp parameter from ieee80211_obss_color_collision_notify since it is no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/f91e1c78896408ac556586ba8c99e4e389aeba02.1707389901.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12x86/xen: Add some null pointer checking to smp.cKunwu Chan
kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/ Suggested-by: Markus Elfring <Markus.Elfring@web.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-12smb: client: handle path separator of created SMB symlinksPaulo Alcantara
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target before sending it over the wire otherwise the created SMB symlink may become innaccesible from server side. Fixes: 514d793e27a3 ("smb: client: allow creating symlinks via reparse points") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-12smb: client: set correct id, uid and cruid for multiuser automountsPaulo Alcantara
When uid, gid and cruid are not specified, we need to dynamically set them into the filesystem context used for automounting otherwise they'll end up reusing the values from the parent mount. Fixes: 9fd29a5bae6e ("cifs: use fs_context for automounts") Reported-by: Shane Nehring <snehring@iastate.edu> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2259257 Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-12ice: Fix debugfs with devlink reloadWojciech Drewek
During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Remove and readd netdev during devlink reloadWojciech Drewek
Recent changes to the devlink reload (commit 9b2348e2d6c9 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: add support for 3k signing DDP sections for E825CGrzegorz Nitka
E825C devices shall support the new signing type of RSA 3K for new DDP section (SEGMENT_SIGN_TYPE_RSA3K_E825 (5) - already in the code). The driver is responsible to verify the presence of correct signing type. Add 3k signinig support for E825C devices based on mac_type: ICE_MAC_GENERIC_3K_E825; Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Add helper function ice_is_generic_macGrzegorz Nitka
E800 series devices have a couple of quirks: 1. Sideband control queues are not supported 2. The registers that the driver needs to program for the "Precision Time Protocol (PTP)" feature are different for E800 series devices compared to other devices supported by this driver. Both these require conditional logic based on the underlying device we are dealing with. The function ice_is_sbq_supported added by commit 8f5ee3c477a8 ("ice: add support for sideband messages") addresses (1). The same function can be used to address (2) as well but this just looks weird readability wise in cases that have nothing to do with sideband control queues: if (ice_is_sbq_supported(hw)) /* program register A */ else /* program register B */ For these cases, the function ice_is_generic_mac introduced by this patch communicates the idea/intention better. Also rework ice_is_sbq_supported to use this new function. As side-band queue is supported for E825C devices, it's mac_type is considered as generic mac_type. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: introduce new E825C devices familyGrzegorz Nitka
Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12xen/xenbus: document will_handle argument for xenbus_watch_path()SeongJae Park
Commit 2e85d32b1c86 ("xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()") added will_handle argument to xenbus_watch_path() and its wrapper, xenbus_watch_pathfmt(), but didn't document it on the kerneldoc comments of the function. This is causing warnings that reported by kernel test robot. Add the documentation to fix it. Fixes: 2e85d32b1c86 ("xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401121154.FI8jDGun-lkp@intel.com/ Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240112185903.83737-1-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-12can: softing: remove redundant NULL checkDaniil Dulov
In this case dev cannot be NULL, so remove redundant check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Link: https://lore.kernel.org/all/20240211150535.3529-1-d.dulov@aladdin.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCANJimmy Assarsson
Add support for new Kvaser pciefd device, M.2 PCIe 4xCAN, based on Xilinx FPGA. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20231113134717.515037-1-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12Merge patch "can network drivers maintainer"Marc Kleine-Budde
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: This series is a single patch to replace Wolfgang by myself as the second maintainer of the CAN drivers subtree. Link: https://lore.kernel.org/all/20240205111743.920528-1-mailhol.vincent@wanadoo.fr [mkl: fix typo] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: change can network drivers maintainerVincent Mailhol
Wolfgang has not been active on the linux-can mailing list other the last two years, his last activity being on November 2021 [1]. In replacement, I would like to nominate myself (Vincent Mailhol) as the second maintainer of the CAN drivers subtree. Wolfgang is already listed in the CREDITS since [2], so despite this removal, his legacy remains credited. Thank you for all your contributions! [1] https://lore.kernel.org/linux-can/?q=f%3AWolfgang+Grandegger [2] commit 4261a2043f1b ("can: Update MAINTAINERS and CREDITS file") Link: https://git.kernel.org/torvalds/c/4261a2043f1b CC: Marc Kleine-Budde <mkl@pengutronix.de> CC: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240205111743.920528-2-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12Merge patch series "can: m_can: Optimizations for m_can/tcan part 2"Marc Kleine-Budde
Markus Schneider-Pargmann <msp@baylibre.com> says: The series implements many small and bigger throughput improvements and adds rx/tx coalescing at the end. Changes in v7: - Rebased to v6.8-rc1 - Fixed NULL pointer dereference in m_can_clean() on am62 that happened when doing ip link up, ip link down, ip link up - Fixed a racecondition on am62 observed with high throughput tests. netdev_completed_queue() was called before netdev_sent_queue() as the interrupt was processed so fast. netdev_sent_queue() is now reported before the actual sent is done. - Fixed an initializing issue on am62 where active interrupts are getting lost between runs. Fixed by resetting cdev->active_interrupts in m_can_disable_all_interrupts() - Removed m_can_start_fast_xmit() because of a reordering of operations due to above mentioned race condition Changes in v6: - Rebased to v6.6-rc2 - Added two small changes for the newly integrated polling feature - Reuse the polling hrtimer for coalescing as the timer used for coalescing has a similar purpose as the one for polling. Also polling and coalescing will never be active at the same time. Changes in v5: - Add back parenthesis in m_can_set_coalesce(). This will make checkpatch unhappy but gcc happy. - Remove unused fifo_header variable in m_can_tx_handler(). - Rebased to v6.5-rc1 Changes in v4: - Create and use struct m_can_fifo_element in m_can_tx_handler - Fix memcpy_and_pad to copy the full buffer - Fixed a few checkpatch warnings - Change putidx to be unsigned - Print hard_xmit error only once when TX FIFO is full Changes in v3: - Remove parenthesis in error messages - Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit header and data in one transaction'. - Replace spin_lock with spin_lock_irqsave. I got a report of a interrupt that was calling start_xmit just after the netqueue was woken up before the locked region was exited. spin_lock_irqsave should fix this. I attached the full stack at the end of the mail if someone wants to know. - Rebased to v6.3-rc1. - Removed tcan4x5x patches from this series. Changes in v2: - Rebased on v6.2-rc5 - Fixed missing/broken accounting for non peripheral m_can devices. previous versions: v1 - https://lore.kernel.org/lkml/20221221152537.751564-1-msp@baylibre.com v2 - https://lore.kernel.org/lkml/20230125195059.630377-1-msp@baylibre.com v3 - https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@baylibre.com v4 - https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@baylibre.com v5 - https://lore.kernel.org/lkml/20230718075708.958094-1-msp@baylibre.com v6 - https://lore.kernel.org/lkml/20230929141304.3934380-1-msp@baylibre.com Link: https://lore.kernel.org/all/20240207093220.2681425-1-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12i2c: qcom-geni: Correct I2C TRE sequenceViken Dadhaniya
For i2c read operation in GSI mode, we are getting timeout due to malformed TRE basically incorrect TRE sequence in gpi(drivers/dma/qcom/gpi.c) driver. I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function i.e. geni_i2c_gpi_xfer(). TRE stands for Transfer Ring Element - which is basically an element with size of 4 words. It contains all information like slave address, clk divider, dma address value data size etc). Mainly we have 3 TREs(Config, GO and DMA tre). - CONFIG TRE : consists of internal register configuration which is required before start of the transfer. - DMA TRE : contains DDR/Memory address, called as DMA descriptor. - GO TRE : contains Transfer directions, slave ID, Delay flags, Length of the transfer. I2c driver calls GPI driver API to config each TRE depending on the protocol. For read operation tre sequence will be as below which is not aligned to hardware programming guide. - CONFIG tre - DMA tre - GO tre As per Qualcomm's internal Hardware Programming Guide, we should configure TREs in below sequence for any RX only transfer. - CONFIG tre - GO tre - DMA tre Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5 Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-12ASoC: amd: yc: Fix non-functional mic on Lenovo 82UUAttila Tőkés
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7) needs a quirk entry for the internal microphone to function. Signed-off-by: Attila Tőkés <attitokes@gmail.com> Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12can: m_can: Implement transmit submission coalescingMarkus Schneider-Pargmann
m_can supports submitting multiple transmits with one register write. This is an interesting option to reduce the number of SPI transfers for peripheral chips. The m_can_tx_op is extended with a bool that signals if it is the last transmission and the submit should be executed immediately. The worker then writes the skb to the FIFO and submits it only if the submit bool is set. If it isn't set, the worker will write the next skb which is waiting in the workqueue to the FIFO, etc. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-15-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Implement BQLMarkus Schneider-Pargmann
Implement byte queue limiting in preparation for the use of xmit_more(). Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-14-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Use tx_fifo_in_flight for netif_queue controlMarkus Schneider-Pargmann
The network queue is currently always stopped in start_xmit and continued in the interrupt handler. This is not possible anymore if we want to keep multiple transmits in flight in parallel. Use the previously introduced tx_fifo_in_flight counter to control the network queue instead. This has the benefit of not needing to ask the hardware about fifo status. This patch stops the network queue in start_xmit if the number of transmits in flight reaches the size of the fifo and wakes up the queue from the interrupt handler once the transmits in flight drops below the fifo size. This means any skbs over the limit will be rejected immediately in start_xmit (it shouldn't be possible at all to reach that state anyways). The maximum number of transmits in flight is the size of the fifo. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-13-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Introduce a tx_fifo_in_flight counterMarkus Schneider-Pargmann
Keep track of the number of transmits in flight. This patch prepares the driver to control the network interface queue based on this counter. By itself this counter be implemented with an atomic, but as we need to do other things in the critical sections later I am using a spinlock instead. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-12-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Use the workqueue as queueMarkus Schneider-Pargmann
The current implementation uses the workqueue for peripheral chips to submit work. Only a single work item is queued and used at any time. To be able to keep more than one transmit in flight at a time, prepare the workqueue to support multiple transmits at the same time. Each work item now has a separate storage for a skb and a pointer to cdev. This assures that each workitem can be processed individually. The workqueue is replaced by an ordered workqueue which makes sure that only a single worker processes the items queued on the workqueue. Also items are ordered by the order they were enqueued. This removes most of the concurrency the workqueue normally offers. It is not necessary for this driver. The cleanup functions have to be adopted a bit to handle this new mechanism. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-11-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Cache tx putidxMarkus Schneider-Pargmann
m_can_tx_handler is the only place where data is written to the tx fifo. We can calculate the putidx in the driver code here to avoid the dependency on the txfqs register. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/20240207093220.2681425-10-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Use u32 for putidxMarkus Schneider-Pargmann
putidx is not an integer normally, it is an unsigned field used in hardware registers. Use a u32 for it. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/20240207093220.2681425-9-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Add tx coalescing ethtool supportMarkus Schneider-Pargmann
Add TX support to get/set functions for ethtool coalescing. tx-frames-irq and tx-usecs-irq can only be set/unset together. tx-frames-irq needs to be less than TXE and TXB. As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be enabled/disabled individually but they need to have the same value if enabled. Polling is excluded from TX irq coalescing. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/20240207093220.2681425-8-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Add rx coalescing ethtool supportMarkus Schneider-Pargmann
Add the possibility to set coalescing parameters with ethtool. rx-frames-irq and rx-usecs-irq can only be set and unset together as the implemented mechanism would not work otherwise. rx-frames-irq can't be greater than the RX FIFO size. Also all values can only be changed if the chip is not active. Polling is excluded from irq coalescing support. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240207093220.2681425-7-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Implement transmit coalescingMarkus Schneider-Pargmann
Extend the coalescing implementation for transmits. In normal mode the chip raises an interrupt for every finished transmit. This implementation switches to coalescing mode as soon as an interrupt handled a transmit. For coalescing the watermark level interrupt is used to interrupt exactly after x frames were sent. It switches back into normal mode once there was an interrupt with no finished transmit and the timer being inactive. The timer is shared with receive coalescing. The time for receive and transmit coalescing timers have to be the same for that to work. The benefit is to have only a single running timer. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240207093220.2681425-6-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Implement receive coalescingMarkus Schneider-Pargmann
m_can offers the possibility to set an interrupt on reaching a watermark level in the receive FIFO. This can be used to implement coalescing. Unfortunately there is no hardware timeout available to trigger an interrupt if only a few messages were received within a given time. To solve this I am using a hrtimer to wake up the irq thread after x microseconds. The timer is always started if receive coalescing is enabled and new received frames were available during an interrupt. The timer is stopped if during a interrupt handling no new data was available. If the timer is started the new item interrupt is disabled and the watermark interrupt takes over. If the timer is not started again, the new item interrupt is enabled again, notifying the handler about every new item received. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240207093220.2681425-5-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Write transmit header and data in one transactionMarkus Schneider-Pargmann
Combine header and data before writing to the transmit fifo to reduce the overhead for peripheral chips. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/20240207093220.2681425-4-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Move hrtimer init to m_can_class_registerMarkus Schneider-Pargmann
The hrtimer_init() is called in m_can_plat_probe() and the hrtimer function is set in m_can_class_register(). For readability it is better to keep these two together in m_can_class_register(). Cc: Judith Mendez <jm@ti.com> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240207093220.2681425-3-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: m_can: Start/Cancel polling timer together with interruptsMarkus Schneider-Pargmann
Interrupts are enabled/disabled in more places than just m_can_start() and m_can_stop(). Couple the polling timer with enabling/disabling of all interrupts to achieve equivalent behavior. Cc: Judith Mendez <jm@ti.com> Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240207093220.2681425-2-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12Merge patch series "can: esd: add support for esd GmbH PCIe/402 CAN interface"Marc Kleine-Budde
Stefan Mätje <stefan.maetje@esd.eu> says: The purpose of this patch is to introduce a new CAN driver to support the esd GmbH 402 family of CAN interface boards. The hardware design is based on a CAN controller implemented in a FPGA attached to a PCIe link. More information on these boards can be found following the links included in the commit message. This patch supports all boards but will operate the CAN-FD capable boards only in Classic-CAN mode. The CAN-FD support will be added when the initial patch has stabilized. The patch is reuses the previous work of my former colleague: Link: https://lore.kernel.org/linux-can/1426592308-23817-1-git-send-email-thomas.koerper@esd.eu The patch is based on the linux-can-next main branch. Changed in v11: No functional, only editorial changes due to feedback on v10. - Make lifetime of macros used for hardware timestamp calculation very short by #undef-ing them after use. - Fixed insertion order of new entry in MAINTAINERS file. Changed in v10: Most changes due to feedback by Vincent Mailhol https://lore.kernel.org/linux-can/CAMZ6RqLOAC930GNOU+pWuoi6FgYwFOuFrSyAzVjvE2fuVgy8oA@mail.gmail.com - Add support for ethtool operations by using default operations provided by the can_dev module for drivers with hardware time stamp support. - Factor out core unregistration into pci402_unregister_core(). - Factor out getting next TX fifo index into acc_tx_fifo_next(). - Stop counting alloc_can_err_skb() failures in rx_dropped statistic. - Add CAN_ERR_CNT flag in CAN error frames as needed. - Rework function acc_reset_fpga(). To clear I^2C bus enable bit is not necessary after FPGA reset. - Simplify struct acc_bmmsg_rxtxdone layout. - Additional non functional changes due to feedback by Vincent - Some spelling corrections: ESDACC -> esdACC Changes in v9: - Fix returning success error code in case of allocation failure in pci402_probe(). Changes in v8: - Rebased to 6.6-rc2 on linux-can-next branch main Changes in v7: - Numerous changes. Find the quoted with inline comments about changes below after the changes list. Stuff that I don't understand and where I have questions is marked with ????. Unfortunately I will be AFK till 28th of November. Changes in v6: - Fixed the statistic handling of RX overrun errors and increase net_device_stats::rx_errors instead of net_device_stats::rx_dropped. - Added a patch to not increase rx statistics when generating a CAN rx error message frame as suggested on the linux-can list. - Added a patch to not not increase rx_bytes statistics for RTR frames as suggested on the linux-can list. The last two patches change the statistics handling from the previous style used in other drivers to the newly suggested one. Changes in v5: - Added the initialization for netdev::dev_port as it is implemented for another CAN driver. See https://lore.kernel.org/linux-can/20211026180553.1953189-1-mailhol.vincent@wanadoo.fr Changes in v4: - Fixed the build failure on ARCH=arm64 that was found by the Intel kernel test robot. See https://lore.kernel.org/linux-can/202109120608.7ZbQXkRh-lkp@intel.com Removed error monitoring code that used GCC's built-in compiler functions for atomic access (__sync_* functions). GCC versions after 9 (tested with "gcc-10 (Ubuntu 10.3.0-1ubuntu1~20.04)") don't implement the intrinsic atomic as in-line code but call "__aarch64_ldadd4_acq_rel" on arm64. This GCC support function is not exported by the kernel and therefore the module build post-processing fails. Removed that code because the error monitoring never showed a problem during the development this year. Changes in v3: - Rework the bus-off restart logic in acc_set_mode() and handle_core_msg_errstatechange() to call netif_wake_queue() from the error active event. - Changed pci402_init_card() to allocate a variable sized array of struct acc_core using devm_kcalloc() instead of using a fixed size array in struct pci402_card. - Changed handle_core_msg_txabort() to release aborted TX frames in TX FIFO order. - Fixed the acc_close() function to abort all pending TX request in esdACC controller. - Fixed counting of transmit aborts in handle_core_msg_txabort(). It is now done like in can_flush_echo_skb(). - Fixed handle_core_msg_buserr() to create error frames including the CAN RX and TX error counters that were missing. - Fixed acc_set_bittiming() neither to touch LOM mode setting of esdACC controller nor to enter or leave RESET mode. The esdACC controller is going active on the CAN bus in acc_open() and is going inactive (RESET mode) again in acc_close(). - Rely on the automatic release of memory fetched by devm_kzalloc(). But still use devm_irq_free() explicitely to make sure that the interrupt handler is disconnected at that point. This avoids a possible crash in non-MSI mode due to the IRQ triggered by another device on the same PCI IRQ line. - Changed to use DMA map API instead of pci_*_consistent compatibility wrappers. - Fixed stale email references and updated copyright information. - Removed any traces of future CAN-FD support. Changes in v2: - Avoid warning triggered by -Wshift-count-overflow on architectures with 32-bit dma_addr_t. - Fixed Makefile not to build the kernel module always. Doing this renamed esd402_pci.c to esd_402_pci-core.c as recommended by Marc. previous versions: v1 - https://lore.kernel.org/linux-can/20210728203647.15240-1-Stefan.Maetje@esd.eu v2 - https://lore.kernel.org/linux-can/20210730173805.3926-1-Stefan.Maetje@esd.eu v3 - https://lore.kernel.org/linux-can/20210908164640.23243-1-stefan.maetje@esd.eu v4 - https://lore.kernel.org/linux-can/20210916172152.5127-1-stefan.maetje@esd.eu v5 - https://lore.kernel.org/linux-can/20211109155326.2608822-1-stefan.maetje@esd.eu v6 - https://lore.kernel.org/linux-can/20211201220328.3079270-1-stefan.maetje@esd.eu v7 - https://lore.kernel.org/linux-can/20221106224156.3619334-1-stefan.maetje@esd.eu v8 - https://lore.kernel.org/linux-can/20231025141635.1459606-1-stefan.maetje@esd.eu v9 - https://lore.kernel.org/linux-can/20231107184103.2802678-1-stefan.maetje@esd.eu v10 - https://lore.kernel.org/linux-can/20231120175657.4070921-1-stefan.maetje@esd.eu Link: https://lore.kernel.org/all/20231122160211.2110448-1-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: esd: add support for esd GmbH PCIe/402 CAN interface familyStefan Mätje
This patch adds support for the PCI based PCIe/402 CAN interface family from esd GmbH that is available with various form factors (https://esd.eu/en/products/402-series-can-interfaces). All boards utilize a FPGA based CAN controller solution developed by esd (esdACC). For more information on the esdACC see https://esd.eu/en/products/esdacc. This driver detects all available CAN interface board variants of the family but atm. operates the CAN-FD capable devices in Classic-CAN mode only! A later patch will introduce the CAN-FD functionality in this driver. Co-developed-by: Thomas Körper <thomas.koerper@esd.eu> Signed-off-by: Thomas Körper <thomas.koerper@esd.eu> Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://lore.kernel.org/all/20231122160211.2110448-3-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH ↵Stefan Mätje
PCIe/402 CAN drivers Adding myself (Stefan Mätje) as a maintainer for the upcoming driver of the PCIe/402 interface card family. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://lore.kernel.org/all/20231122160211.2110448-2-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: isotp: support dynamic flow control parametersOliver Hartkopp
The ISO15765-2 standard supports to take the PDUs communication parameters blocksize (BS) and Separation Time minimum (STmin) either from the first received flow control (FC) "static" or from every received FC "dynamic". Add a new CAN_ISOTP_DYN_FC_PARMS flag to support dynamic FC parameters. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20231208165729.3011-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: bcm: add recvmsg flags for own, local and remote trafficNicolas Maier
CAN RAW sockets allow userspace to tell if a received CAN frame comes from the same socket, another socket on the same host, or another host. See commit 1e55659ce6dd ("can-raw: add msg_flags to distinguish local traffic"). However, this feature is missing in CAN BCM sockets. Add the same feature to CAN BCM sockets. When reading a received frame (opcode RX_CHANGED) using recvmsg, two flags in msg->msg_flags may be set following the previous convention (from CAN RAW), to distinguish between 'own', 'local' and 'remote' CAN traffic. Update the documentation to reflect this change. Signed-off-by: Nicolas Maier <nicolas.maier.dev@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240120081018.2319-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12wifi: rtw89: change qutoa to DBCC by default for WiFi 7 chipsPing-Ke Shih
Since WiFi 7 is expected to support MLO, so we should enable MAC-0/1 and PHY-0/1. By default, set dbcc_en=true, change quota to DBCC mode, and set MLO mode to 2 + 0 that means we only use 2x2 connection on MAC/PHY-0 for now. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-12-pkshih@realtek.com
2024-02-12wifi: rtw89: reference quota mode when setting Tx powerPo-Hao Huang
Reference the current quota mode to avoid misleading warnings. This patch is required after supporting DBCC quota mode. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-11-pkshih@realtek.com
2024-02-12wifi: rtw89: 8922a: implement AP mode related reg for BE generationChih-Kang Chang
Modify reg for BE generation when AP stop, otherwise have warning messages "Polling beacon packet empty fail". Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-10-pkshih@realtek.com
2024-02-12wifi: rtw89: 8922a: correct register definition and merge IO for ↵Ping-Ke Shih
ctrl_nbtg_bt_tx() ctrl_nbtg_bt_tx is used to control AGC settings under non-shared path condition, which is affected by BT TX. To speed up IO, merge continual bit mask into one IO. Also, correct a register definition. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-9-pkshih@realtek.com
2024-02-12wifi: rtw89: differentiate narrow_bw_ru_dis setting according to chip genZong-Zhe Yang
When there are OBSS that cannot interpret 26-tone RU transmissions, we should disable 26-tone RU HE TB PPDU transmissions. So, add registers accordingly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-8-pkshih@realtek.com
2024-02-12wifi: rtw89: use PLCP information to match BSS_COLOR and AIDPing-Ke Shih
Hardware can use spatial reuse to reduce interference in OBSS environment, and originally use MAC header to match BSS color and AID. Change to use PLCP to match them earlier to prevent margin timing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-7-pkshih@realtek.com
2024-02-12wifi: rtw89: mac: reset PHY-1 hardware when going to enable/disablePing-Ke Shih
When going to use PHY-1, reset the hardware to make it work properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-6-pkshih@realtek.com
2024-02-12wifi: rtw89: mac: correct MUEDCA setting for MAC-1Ping-Ke Shih
Consider mac_idx as an argument to set this register to disable QoS NULL update MUEDCA timer. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-5-pkshih@realtek.com
2024-02-12wifi: rtw89: mac: return held quota of DLE when changing MAC-1Ping-Ke Shih
DLE (data link engine) could hold quota when we are going to enable/disable MAC-1 block, so trigger hardware to return all held quota. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-4-pkshih@realtek.com
2024-02-12wifi: rtw89: load BB parameters to PHY-1Ping-Ke Shih
We are going to support MLO/DBCC, so need to load parameter table to PHY-1 as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-3-pkshih@realtek.com
2024-02-12wifi: rtw89: correct PHY register offset for PHY-1Ping-Ke Shih
PHY-1 can be seen as a copy of PHY-0, and the difference is their base register address, so add a function to get offset to access PHY-1. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240209065229.34515-2-pkshih@realtek.com
2024-02-12wifi: brcmfmac: do not cast hidden SSID attribute value to booleanAlexey Berezhok
In 'brcmf_cfg80211_start_ap()', not assume that NL80211_HIDDEN_SSID_NOT_IN_USE is zero but prefer an explicit check instead. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexey Berezhok <a@bayrepo.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240208085121.2430-1-a@bayrepo.ru
2024-02-12wifi: mwifiex: Refactor 1-element array into flexible array in struct ↵Kees Cook
mwifiex_ie_types_chan_list_param_set struct mwifiex_ie_types_chan_list_param_set::chan_scan_param is treated as a flexible array, so convert it into one so that it doesn't trip the array bounds sanitizer[1]. Only a few places were using sizeof() on the whole struct, so adjust those to follow the calculation pattern to avoid including the trailing single element. Examining binary output differences doesn't appear to show any literal size values changing, though it is obfuscated a bit by the compiler adjusting register usage and stack spill slots, etc. Link: https://github.com/KSPP/linux/issues/51 [1] Cc: Brian Norris <briannorris@chromium.org> Cc: Kalle Valo <kvalo@kernel.org> Cc: Dmitry Antipov <dmantipov@yandex.ru> Cc: Johannes Berg <johannes.berg@intel.com> Cc: zuoqilin <zuoqilin@yulong.com> Cc: Ruan Jinjie <ruanjinjie@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240207103024.make.423-kees@kernel.org
generated by cgit (git 2.34.1) at 2025-09-16 06:53:04 +0000