summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-17drm/sun4i: hdmi: Support HDMI controller on A10Chen-Yu Tsai
The HDMI controller in the A10 SoC is the same as the one currently supported in the A10s. It has slightly different setup parameters. Since these parameters are not thoroughly understood, we add support for this variant by copying these parameters verbatim. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-4-wens@csie.org
2017-10-17drm/sun4i: tcon: Add support for A10 TCONJonathan Liu
The A10 has two TCONs that are similar to the ones found on other SoCs. Like the A31, TCON0 has a register used to mux the TCON outputs to the downstream encoders. The bit fields are slightly different. Signed-off-by: Jonathan Liu <net147@gmail.com> [wens@csie.org: Reworked for A10 and fixed up commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-3-wens@csie.org
2017-10-17drm/sun4i: backend: Support output muxingChen-Yu Tsai
The backend has a mux to select the destination of the data to output to. It can select the TCON or the frontends. On the A20, it includes an option to output to the second TCON. This is not documented in the user manual, but the vendor kernel uses it nevertheless, so the second backend outputs to the second TCON. Although the muxing can be changed on the fly, DRM needs to be able to group a bunch of layers such that they get switched to another crtc together. This is because the display backend does the layer compositing, while the TCON generates the display timings. This constraint is not supported by DRM. Here we simply pair up backends and TCONs with the same ID. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org
2017-10-17drm/sun4i: tcon: Move out the tcon0 common setupMaxime Ripard
Some channel0 setup has to be done, no matter what the output interface is (RGB, CPU, LVDS). Move that code into a common function in order to avoid duplication. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/183100/
2017-10-17drm/sun4i: tcon: Don't rely on encoders to set the TCON modeMaxime Ripard
Just like we did for the TCON enable and disable, for historical reasons we used to rely on the encoders calling the TCON mode_set function, while the CRTC has a callback for that. Let's implement it in order to reduce the boilerplate code. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/faa3a4d511039af1d116270dfef3a8b60ca3591e.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Don't rely on encoders to enable the TCONMaxime Ripard
So far, we've required all the TCON-connected encoders to call the TCON enable and disable functions. This was made this way because in the RGB/LVDS case, the TCON is the CRTC and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we have another encoder down the road that needs to be programmed. We also needed to know which channel the encoder is connected to, which is encoder-specific. The CRTC's enable and disable callbacks can work just fine for our use case, and we can get the channel to use just by looking at the type of encoder, since that is fixed. Implement those callbacks, which will remove some of the encoder boilerplate. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Make tcon_get_clk_delay mode argument constMaxime Ripard
The drm_display_mode pointer can be mark const, so let's do it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/e6f92f126640aa6de639386f9b4677db3d8bb37b.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Make tcon_set_mux mode argument constMaxime Ripard
The drm_display_mode pointer can be mark const, so let's do it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0cce5a43fc3b56953d21a54fc3c14672f755f42.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: Realign Makefile padding and reorder itMaxime Ripard
Some options were not padded as they should, and the order in the Makefile was chaotic. Fix that. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/9410b284ec97453fa692537dffaaa4fb4833347c.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/i915/uc: Add pretty printer for uc firmwareMichal Wajdeczko
Debugfs for GuC and HuC load info have similar common part. Move and update dump of uc_fw to separate helper for reuse. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171017094449.22584-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-17drm/i915: Handle drm-layer errors in intel_dp_add_mst_connectorJames Ausmus
Make intel_dp_add_mst_connector handle error returns from the drm_ calls. Add intel_connector_free to support cleanup on the error path. v2: Rename new function to avoid confusion, and simplify error paths (Ville) v3: Indentation fixup, style fixes (Ville) v4: Clarify usage of intel_connector_free, and fix usage of intel_connector_free v5: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171013180144.15865-1-james.ausmus@intel.com
2017-10-17fs: Avoid invalidation in interrupt context in dio_complete()Lukas Czerner
Currently we try to defer completion of async DIO to the process context in case there are any mapped pages associated with the inode so that we can invalidate the pages when the IO completes. However the check is racy and the pages can be mapped afterwards. If this happens we might end up calling invalidate_inode_pages2_range() in dio_complete() in interrupt context which could sleep. This can be reproduced by generic/451. Fix this by passing the information whether we can or can't invalidate to the dio_complete(). Thanks Eryu Guan for reporting this and Jan Kara for suggesting a fix. Fixes: 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO") Reported-by: Eryu Guan <eguan@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-17drm/sun4i: Implement endpoint parsing using kfifoMaxime Ripard
The commit da82b8785eeb ("drm/sun4i: add components in breadth first traversal order") implemented a breadth first traversal of our device tree nodes graph. However, it was relying on the kernel linked lists, and those are not really safe for addition. Indeed, in a single pipeline stage, your first stage (ie, the mixer or fronted) will be queued, and it will be the final iteration of that list as far as list_for_each_entry_safe is concerned. Then, during that final iteration, we'll queue another element (the TCON or the backend) that list_for_each_entry_safe will not account for, and we will leave the loop without having iterated over all the elements. And since we won't have built our components list properly, the DRM driver will be left non-functional. We can instead use a kfifo to queue and enqueue components in-order, as was the original intention. This also has the benefit of removing any dynamic allocation, making the error handling path simpler too. The only thing we're losing is the ability to tell whether an element has already been queued, but that was only needed to remove spurious logs, and therefore purely cosmetic. This means that this commit effectively reverses e8afb7b67fba ("drm/sun4i: don't add components that are already in the queue"). Fixes: da82b8785eeb ("drm/sun4i: add components in breadth first traversal order") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/4ecb323e787918208f6a5d9f0ebba12c62583c98.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: backend: Offset layer buffer address by DRAM starting addressChen-Yu Tsai
The display backend, as well as other peripherals that have a DRAM clock gate and access DRAM directly, bypassing the system bus, address the DRAM starting from 0x0, while physical addresses the system uses starts from 0x40000000 (or 0x20000000 in A80's case). This issue was witnessed on the Cubietruck, which has 2GB of RAM. Devices with less RAM function normally due to the DRAM address wrapping around. CMA seems to always allocate its buffer at a very high address, close to the end of DRAM. On a 1GB RAM device, the physical address would be something like 0x78000000. The DRAM address 0x78000000 would access the same DRAM region as 0x38000000 on a system, as the DRAM address would only span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this case. However on the Cubietruck, the DRAM is 2GB. The physical address is 0x40000000 ~ 0xbfffffff. The buffer would be something like 0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning the buffer address wraps around to 0x38000000, which is wrong. The correct DRAM address for it should be 0x78000000. Correct the address configured into the backend layer registers by PHYS_OFFSET to account for this. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017042349.31743-6-wens@csie.org
2017-10-17MAINTAINERS: fix git tree url for musb moduleBin Liu
Commit 3b2435192fe91 ("MAINTAINERS: drop OMAP USB and MUSB maintainership") switched the maintainer for musb module, but didn't update the git tree location. Delete the git tree information, since the current maintainer doesn't have a public tree. Reported-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Bin Liu <b-liu@ti.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACENamhyung Kim
Thomas reported that 'perf buildid-list' gets a SEGFAULT due to NULL pointer deref when he ran it on a data with namespace events. It was because the buildid_id__mark_dso_hit_ops lacks the namespace event handler and perf_too__fill_default() didn't set it. Program received signal SIGSEGV, Segmentation fault. 0x0000000000000000 in ?? () Missing separate debuginfos, use: dnf debuginfo-install audit-libs-2.7.7-1.fc25.s390x bzip2-libs-1.0.6-21.fc25.s390x elfutils-libelf-0.169-1.fc25.s390x +elfutils-libs-0.169-1.fc25.s390x libcap-ng-0.7.8-1.fc25.s390x numactl-libs-2.0.11-2.ibm.fc25.s390x openssl-libs-1.1.0e-1.1.ibm.fc25.s390x perl-libs-5.24.1-386.fc25.s390x +python-libs-2.7.13-2.fc25.s390x slang-2.3.0-7.fc25.s390x xz-libs-5.2.3-2.fc25.s390x zlib-1.2.8-10.fc25.s390x (gdb) where #0 0x0000000000000000 in ?? () #1 0x00000000010fad6a in machines__deliver_event (machines=<optimized out>, machines@entry=0x2c6fd18, evlist=<optimized out>, event=event@entry=0x3fffdf00470, sample=0x3ffffffe880, sample@entry=0x3ffffffe888, tool=tool@entry=0x1312968 <build_id.mark_dso_hit_ops>, file_offset=1136) at util/session.c:1287 #2 0x00000000010fbf4e in perf_session__deliver_event (file_offset=1136, tool=0x1312968 <build_id.mark_dso_hit_ops>, sample=0x3ffffffe888, event=0x3fffdf00470, session=0x2c6fc30) at util/session.c:1340 #3 perf_session__process_event (session=0x2c6fc30, session@entry=0x0, event=event@entry=0x3fffdf00470, file_offset=file_offset@entry=1136) at util/session.c:1522 #4 0x00000000010fddde in __perf_session__process_events (file_size=11880, data_size=<optimized out>, data_offset=<optimized out>, session=0x0) at util/session.c:1899 #5 perf_session__process_events (session=0x0, session@entry=0x2c6fc30) at util/session.c:1953 #6 0x000000000103b2ac in perf_session__list_build_ids (with_hits=<optimized out>, force=<optimized out>) at builtin-buildid-list.c:83 #7 cmd_buildid_list (argc=<optimized out>, argv=<optimized out>) at builtin-buildid-list.c:115 #8 0x00000000010a026c in run_builtin (p=0x1311f78 <commands+24>, argc=argc@entry=2, argv=argv@entry=0x3fffffff3c0) at perf.c:296 #9 0x000000000102bc00 in handle_internal_command (argv=<optimized out>, argc=2) at perf.c:348 #10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:392 #11 main (argc=<optimized out>, argv=0x3fffffff3c0) at perf.c:536 (gdb) Fix it by adding a stub event handler for namespace event. Committer testing: Further clarifying, plain using 'perf buildid-list' will not end up in a SEGFAULT when processing a perf.data file with namespace info: # perf record -a --namespaces sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.024 MB perf.data (1058 samples) ] # perf buildid-list | wc -l 38 # perf buildid-list | head -5 e2a171c7b905826fc8494f0711ba76ab6abbd604 /lib/modules/4.14.0-rc3+/build/vmlinux 874840a02d8f8a31cedd605d0b8653145472ced3 /lib/modules/4.14.0-rc3+/kernel/arch/x86/kvm/kvm-intel.ko ea7223776730cd8a22f320040aae4d54312984bc /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/i915/i915.ko 5961535e6732a8edb7f22b3f148bb2fa2e0be4b9 /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/drm.ko f045f54aa78cf1931cc893f78b6cbc52c72a8cb1 /usr/lib64/libc-2.25.so # It is only when one asks for checking what of those entries actually had samples, i.e. when we use either -H or --with-hits, that we will process all the PERF_RECORD_ events, and since tools/perf/builtin-buildid-list.c neither explicitely set a perf_tool.namespaces() callback nor the default stub was set that we end up, when processing a PERF_RECORD_NAMESPACE record, causing a SEGFAULT: # perf buildid-list -H Segmentation fault (core dumped) ^C # Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Fixes: f3b3614a284d ("perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info") Link: http://lkml.kernel.org/r/20171017132900.11043-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-17drm/i915/selftests: Silence the compiler for impossible errorsChris Wilson
It should be impossible for these tests not to run due to an empty ppgtt, but if it should happen, let's report ENODEV (our typical internal error for impossible events). In file included from drivers/gpu/drm/i915/i915_gem.c:5415: drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_mock_ppgtt_huge_fill': >> drivers/gpu/drm/i915/selftests/huge_pages.c:612: error: 'err' may be used uninitialized in this function drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_ppgtt_exhaust_huge': drivers/gpu/drm/i915/selftests/huge_pages.c:1159: error: 'err' may be used uninitialized in this function Reported-by: kbuild-all@01.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017103723.6933-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2017-10-17drm/i915: Report -EFAULT before pwrite fast path into shmemfsChris Wilson
When pwriting into shmemfs, the fast path pagecache_write does not notice when it is writing to beyond the end of the truncated shmemfs inode. Report -EFAULT directly when we try to use pwrite into the !I915_MADV_WILLNEED object. Fixes: 7c55e2c5772d ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl") Testcase: igt/gem_madvise/dontneed-before-pwrite Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk
2017-10-17drm/atomic: Check for busy planes/connectors before setting the commitMaarten Lankhorst
We still want to fail with -EBUSY if a plane or connector is part of a commit, even if it will be assigned to a new commit. This closes a small hole left open where we should return -EBUSY. It's not severe, because wait_for_dependencies and swap_state helpers still block. But it should return -EBUSY and not stall. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Link: https://patchwork.freedesktop.org/patch/msgid/20171016132928.6498-2-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-10-17drm/atomic: Make atomic helper track newly assigned planes correctly, v2.Maarten Lankhorst
Commit 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.") forced planes to always be tracked, but forgot to explicitly get the crtc commit from the new crtc when available. This broke plane commit tracking, and caused kms_atomic_transitions to randomly fail with -EBUSY. Changes since v1: - Prefer new_crtc_state->crtc above old_crtc_state->crtc. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.") Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102671 Testcase: kms_atomic_transitions Link: https://patchwork.freedesktop.org/patch/msgid/20171017052047.8983-1-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-17perf record: Fix documentation for a inexistent option '-l'Taeung Song
'perf record' had a '-l' option that meant "scale counter values" a very long time ago, but it currently belongs to 'perf stat' as '-c'. So remove it. I found this problem in the below case. $ perf record -e cycles -l sleep 3 Error: unknown switch `l Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1507907412-19813-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-17usb: quirks: add quirk for WORLDE MINI MIDI keyboardFelipe Balbi
This keyboard doesn't implement Get String descriptors properly even though string indexes are valid. What happens is that when requesting for the String descriptor, the device disconnects and reconnects. Without this quirk, this loop will continue forever. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: Владимир Мартьянов <vilgeforce@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17Merge tag 'media/v4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Core fixes: - cec: Respond to unregistered initiators, when applicable - dvb_frontend: only use kref after initialized Driver-specific fixes: - qcom, camss: Make function vfe_set_selection static - qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA - s5p-cec: add NACK detection support - media: staging/imx: Fix uninitialized variable warning - dib3000mc: i2c transfers over usb cannot be done from stack - venus: init registered list on streamoff" * tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb_frontend: only use kref after initialized media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA media: cec: Respond to unregistered initiators, when applicable media: s5p-cec: add NACK detection support media: staging/imx: Fix uninitialized variable warning media: qcom: camss: Make function vfe_set_selection static media: venus: init registered list on streamoff media: dvb: i2c transfers over usb cannot be done from stack
2017-10-17usb: musb: sunxi: Explicitly release USB PHY on exitJonathan Liu
This fixes a kernel oops when unloading the driver due to usb_put_phy being called after usb_phy_generic_unregister when the device is detached. Calling usb_phy_generic_unregister causes x->dev->driver to be NULL in usb_put_phy and results in a NULL pointer dereference. Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17usb: musb: Check for host-mode using is_host_active() on reset interruptJonathan Liu
The sunxi musb has a bug where sometimes it will generate a babble error on device disconnect instead of a disconnect IRQ. When this happens the musb controller switches from host mode to device mode (it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and gets stuck in this state. The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM was cleared. To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM) to detect babble error so that sunxi musb babble recovery can handle it by restoring the mode. This information is provided by the driver logic and does not rely on register contents. Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17usb: musb: musb_cppi41: Configure the number of channels for DA8xxAlexandre Bailon
Currently, the number of channels is set to 15 but in the case of DA8xx, the number of channels is 4. Update the driver to configure the number of channels at runtime. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xxAlexandre Bailon
The way to configure the DMA mode on DA8xx is different from DSPS. Add a new function to configure DMA mode on DA8xx and use a callback to call the right function based on the platform. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17usb: musb: musb_cppi41: Fix the address of teardown and autoreq registersAlexandre Bailon
The DA8xx and DSPS platforms don't use the same address for few registers. On Da8xx, this is causing some issues (e.g. teardown that doesn't work). Configure the address of the register during the init and use them instead of constants. Cc: stable@vger.kernel.org # v4.12+ Reported-by: nsekhar@ti.com Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17USB: musb: fix late external abort on suspendJohan Hovold
The musb delayed irq work was never flushed on suspend, something which since 4.9 can lead to an external abort if the work is scheduled after the grandparent's clock has been disabled: PM: Suspending system (mem) PM: suspend of devices complete after 125.224 msecs PM: suspend devices took 0.132 seconds PM: late suspend of devices complete after 7.423 msecs PM: noirq suspend of devices complete after 7.083 msecs suspend debug: Waiting for 5 second(s). Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0262c60 ... [<c054880c>] (musb_default_readb) from [<c0547b5c>] (musb_irq_work+0x48/0x220) [<c0547b5c>] (musb_irq_work) from [<c014f8a4>] (process_one_work+0x1f4/0x758) [<c014f8a4>] (process_one_work) from [<c014fe5c>] (worker_thread+0x54/0x514) [<c014fe5c>] (worker_thread) from [<c015704c>] (kthread+0x128/0x158) [<c015704c>] (kthread) from [<c0109330>] (ret_from_fork+0x14/0x24) Commit 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") started scheduling musb_irq_work with a delay of up to a second and with retries thereby making this easy to trigger, for example, by suspending shortly after a disconnect. Note that we set a flag to prevent the irq work from rescheduling itself during suspend and instead process a disconnect immediately. This takes care of the case where we are disconnected shortly before suspending. However, when in host mode, a disconnect while suspended will still go unnoticed and thus prevent the controller from runtime suspending upon resume as the session bit is always set. This will need to be addressed separately. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Johan Hovold <johan@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17USB: musb: fix session-bit runtime-PM quirkJohan Hovold
The current session-bit quirk implementation does not prevent the retry counter from underflowing, something which could break runtime PM and keep the device active for a very long time (about 2^32 seconds) after a disconnect. This notably breaks the B-device timeout case, but could potentially cause problems also when the controller is operating as an A-device. Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Johan Hovold <johan@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17drm/i915: Remove mostly duplicated video DIP handling from PSR codeVille Syrjälä
Now that the infoframe hooks are part of the intel_dig_port, we can use the normal .write_infoframe() hook to update the VSC SDP. We do need to deal with the size difference between the VSC DIP and the others though. Another minor snag is that the compiler will complain to use if we keep using enum hdmi_infoframe_type type and passing in the DP define instead, so et's just change to unsigned int all over for the inforframe type. v2: Rebase due to other PSR changes Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171013194051.19286-1-ville.syrjala@linux.intel.com
2017-10-17usb: cdc_acm: Add quirk for Elatec TWN3Maksim Salau
Elatec TWN3 has the union descriptor on data interface. This results in failure to bind the device to the driver with the following log: usb 1-1.2: new full speed USB device using streamplug-ehci and address 4 usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: RFID Device (COM) usb 1-1.2: Manufacturer: OEM cdc_acm 1-1.2:1.0: Zero length descriptor references cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue. `lsusb -v` of the device: Bus 001 Device 003: ID 09d8:0320 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x09d8 idProduct 0x0320 bcdDevice 3.00 iManufacturer 1 OEM iProduct 2 RFID Device (COM) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Maksim Salau <msalau@iotecha.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17USB: devio: Revert "USB: devio: Don't corrupt user memory"Hans de Goede
Taking the uurb->buffer_length userspace passes in as a maximum for the actual urbs transfer_buffer_length causes 2 serious issues: 1) It breaks isochronous support for all userspace apps using libusb, as existing libusb versions pass in 0 for uurb->buffer_length, relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc descriptors passed in added together as buffer length. This for example causes redirection of USB audio and Webcam's into virtual machines using qemu-kvm to no longer work. This is a userspace ABI break and as such must be reverted. Note that the original commit does not protect other users / the kernels memory, it only stops the userspace process making the call from shooting itself in the foot. 2) It may cause the kernel to program host controllers to DMA over random memory. Just as the devio code used to only look at the iso_packet_desc lenghts, the host drivers do the same, relying on the submitter of the urbs to make sure the entire buffer is large enough and not checking transfer_buffer_length. But the "USB: devio: Don't corrupt user memory" commit now takes the userspace provided uurb->buffer_length for the buffer-size while copying over the user-provided iso_packet_desc lengths 1:1, allowing the user to specify a small buffer size while programming the host controller to dma a lot more data. (Atleast the ohci, uhci, xhci and fhci drivers do not check transfer_buffer_length for isoc transfers.) This reverts commit fa1ed74eb1c2 ("USB: devio: Don't corrupt user memory") fixing both these issues. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17Merge tag 'phy-for-4.14-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.14 -rc *) Handle error return values in rockchip-typec and tegra-xusb *) Fix MUX error check and ioremap_resource error check in mvebu-cp110-comphy *) Fix NULL pointer dereference error in phy-mtk-tphy *) Make sure pipe selector is not set to incompatible value *) Fix flaky aux channel communication with rockchip-typec PHY *) Fix DP monitors detection issue in rockchip-typec PHY Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-17usb: xhci: Handle error condition in xhci_stop_device()Mayank Rana
xhci_stop_device() calls xhci_queue_stop_endpoint() multiple times without checking the return value. xhci_queue_stop_endpoint() can return error if the HC is already halted or unable to queue commands. This can cause a deadlock condition as xhci_stop_device() would end up waiting indefinitely for a completion for the command that didn't get queued. Fix this by checking the return value and bailing out of xhci_stop_device() in case of error. This patch happens to fix potential memory leaks of the allocated command structures as well. Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,") Cc: <stable@vger.kernel.org> Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17usb: xhci: Reset halted endpoint if trb is noopLu Baolu
When a URB is cancled, xhci driver turns the untransferred trbs into no-ops. If an endpoint stalls on a no-op trb that belongs to the cancelled URB, the event handler won't reset the endpoint. Hence, it will stay halted. Link: http://marc.info/?l=linux-usb&m=149582598330127&w=2 Cc: <stable@vger.kernel.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17xhci: Cleanup current_cmd in xhci_cleanup_command_queue()Jeffy Chen
KASAN reported use-after-free bug when xhci host controller died: [ 176.952537] BUG: KASAN: use-after-free in xhci_handle_command_timeout+0x68/0x224 [ 176.960846] Write of size 4 at addr ffffffc0cbb01608 by task kworker/3:3/1680 ... [ 177.180644] Freed by task 0: [ 177.183882] kasan_slab_free+0x90/0x15c [ 177.188194] kfree+0x114/0x28c [ 177.191630] xhci_cleanup_command_queue+0xc8/0xf8 [ 177.196916] xhci_hc_died+0x84/0x358 Problem here is that when the cmd_timer fired, it would try to access current_cmd while the command queue is already freed by xhci_hc_died(). Cleanup current_cmd in xhci_cleanup_command_queue() to avoid that. Fixes: d9f11ba9f107 ("xhci: Rework how we handle unresponsive or hoptlug removed hosts") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17xhci: Identify USB 3.1 capable hosts by their port protocol capabilityMathias Nyman
Many USB 3.1 capable hosts never updated the Serial Bus Release Number (SBRN) register to USB 3.1 from USB 3.0 xhci driver identified USB 3.1 capable hosts based on this SBRN register, which according to specs "contains the release of the Universal Serial Bus Specification with which this Universal Serial Bus Host Controller module is compliant." but still in october 2017 gives USB 3.0 as the only possible option. Make an additional check for USB 3.1 support and enable it if the xHCI supported protocol capablity lists USB 3.1 capable ports. Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17vfs: fix mounting a filesystem with i_versionMimi Zohar
The mount i_version flag is not enabled in the new sb_flags. This patch adds the missing SB_I_VERSION flag. Fixes: e462ec5 "VFS: Differentiate mount flags (MS_*) from internal superblock flags" Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-16scsi: aacraid: Fix controller initialization failureRaghava Aditya Renukunta
This is a fix to an issue where the driver sends its periodic WELLNESS command to the controller after the driver shut it down.This causes the controller to crash. The window where this can happen is small, but it can be hit at around 4 hours of constant resets. Cc: <stable@vger.kernel.org> Fixes: fbd185986eba (aacraid: Fix AIF triggered IOP_RESET) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16scsi: hpsa: Fix configured_logical_drive_count·checkChristos Gkekas
Check whether configured_logical_drive_count is less than 255. Previous check was always evaluating to true as this variable is defined as u8. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Acked-by: Don Brace <don.brace@microsemi.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16scsi: qla2xxx: Initialize Work element before requesting IRQsHimanshu Madhani
commit a9e170e28636 ("scsi: qla2xxx: Fix uninitialized work element") moved initializiation of work element earlier in the probe to fix call stack. However, it still leaves a window where interrupt can be generated before work element is initialized. Fix that window by initializing work element before we are requesting IRQs. [mkp: fixed typos] Fixes: a9e170e28636 ("scsi: qla2xxx: Fix uninitialized work element") Cc: <stable@vger.kernel.org> # 4.13 Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16scsi: zfcp: fix erp_action use-before-initialize in REC action traceSteffen Maier
v4.10 commit 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery") extended accessing parent pointer fields of struct zfcp_erp_action for tracing. If an erp_action has never been enqueued before, these parent pointer fields are uninitialized and NULL. Examples are zfcp objects freshly added to the parent object's children list, before enqueueing their first recovery subsequently. In zfcp_erp_try_rport_unblock(), we iterate such list. Accessing erp_action fields can cause a NULL pointer dereference. Since the kernel can read from lowcore on s390, it does not immediately cause a kernel page fault. Instead it can cause hangs on trying to acquire the wrong erp_action->adapter->dbf->rec_lock in zfcp_dbf_rec_action_lvl() ^bogus^ while holding already other locks with IRQs disabled. Real life example from attaching lots of LUNs in parallel on many CPUs: crash> bt 17723 PID: 17723 TASK: ... CPU: 25 COMMAND: "zfcperp0.0.1800" LOWCORE INFO: -psw : 0x0404300180000000 0x000000000038e424 -function : _raw_spin_lock_wait_flags at 38e424 ... #0 [fdde8fc90] zfcp_dbf_rec_action_lvl at 3e0004e9862 [zfcp] #1 [fdde8fce8] zfcp_erp_try_rport_unblock at 3e0004dfddc [zfcp] #2 [fdde8fd38] zfcp_erp_strategy at 3e0004e0234 [zfcp] #3 [fdde8fda8] zfcp_erp_thread at 3e0004e0a12 [zfcp] #4 [fdde8fe60] kthread at 173550 #5 [fdde8feb8] kernel_thread_starter at 10add2 zfcp_adapter zfcp_port zfcp_unit <address>, 0x404040d600000000 scsi_device NULL, returning early! zfcp_scsi_dev.status = 0x40000000 0x40000000 ZFCP_STATUS_COMMON_RUNNING crash> zfcp_unit <address> struct zfcp_unit { erp_action = { adapter = 0x0, port = 0x0, unit = 0x0, }, } zfcp_erp_action is always fully embedded into its container object. Such container object is never moved in its object tree (only add or delete). Hence, erp_action parent pointers can never change. To fix the issue, initialize the erp_action parent pointers before adding the erp_action container to any list and thus before it becomes accessible from outside of its initializing function. In order to also close the time window between zfcp_erp_setup_act() memsetting the entire erp_action to zero and setting the parent pointers again, drop the memset and instead explicitly initialize individually all erp_action fields except for parent pointers. To be extra careful not to introduce any other unintended side effect, even keep zeroing the erp_action fields for list and timer. Also double-check with WARN_ON_ONCE that erp_action parent pointers never change, so we get to know when we would deviate from previous behavior. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery") Cc: <stable@vger.kernel.org> #2.6.32+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17drm/plane: drop num_overlay_planes (v3)Dave Airlie
In order to implement plane leasing we need to count things, just make the code consistent with the counting code currently used for counting crtcs/encoders/connectors and drop the need for num_overlay_planes. v2: don't forget to assign plane_ptr. (keithp) v3: use correct bounds check, found by igt. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-17Merge tag 'exynos-drm-fixes-for-v4.14-rc5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - Fix potential use-after-free issue in suspend/resume by cleanning up drvdata at unbind. - Fix potential NULL pointer dereference issue in suspend/resume by setting drm_dev after checking if drm_dev is null or not. * tag 'exynos-drm-fixes-for-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Clear drvdata after component unbind drm/exynos: Fix potential NULL pointer dereference in suspend/resume paths
2017-10-17Merge tag 'tilcdc-4.15' of https://github.com/jsarha/linux into drm-nextDave Airlie
tilcdc changes for v4.15 * tag 'tilcdc-4.15' of https://github.com/jsarha/linux: drm/tilcdc: Remove redundant OF_DETACHED flag setting drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode() drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy() drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW drm/tilcdc: switch to drm_*{get,put} helpers drm/tilcdc: tilcdc_tfp410: make of_device_ids const. drm/tilcdc: tilcdc_panel: make of_device_ids const.
2017-10-16drm/i915/cnl: Fix PLL initialization for HDMI.Rodrigo Vivi
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not on in a global CTRL1 as it was on SKL. The original patch addressed this difference, but leaving behind this single entry here. So we were checking the wrong bits during the PLL initialization and consequently avoiding the CFGCR1 setup during HDMI initialization. Luckly when only HDMI was in use BIOS had already setup this for us. But the dual display with hot plug were messed up. Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com (cherry picked from commit 614ee07acfbb55f2debfc3223ffae97fee17ed14) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915/cnl: Fix PLL mapping.Rodrigo Vivi
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on the clock for the DDI and map the DPLL to the DDI" So we first do the map and then we unset DDI_CLK_OFF to turn the clock on. We do this in 2 separated steps. However, on this second step where we should only unset the off bit we are also unmapping the ddi from the pll. So we end up using the pll 0 for almost everything. Consequently breaking cases with more than one display. Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com (cherry picked from commit 87145d95c3d8297fb74762bd92e022d7f5cc250c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915: Use bdw_ddi_translations_fdi for BroadwellChris Wilson
The compiler warns: drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses hsw_ddi_translations_fdi[] for both Haswell and *Broadwell* Fixes: 7d1c42e679f9 ("drm/i915: Refactor code to select the DDI buf translation table") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.uk Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 1210d3889077653b90b0bfd2cc54e19f4766e4e6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915: Fix eviction when the GGTT is idle but fullChris Wilson
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk (cherry picked from commit 55b4f1ce2f23692c57205b9974fba61baa4b9321) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:13:42 +0000