summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-25platform/x86: huawei-wmi: Silence ambient light sensorKonstantin Shelekhin
Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022: ... [36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ... Fix that by ignoring events generated by ambient light sensor. This issue was reported on GitHub and resolved with the following merge request: https://github.com/aymanbagabas/Huawei-WMI/pull/70 I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list. Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net> Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100Maxim Mikityanskiy
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only (so far only MSI Wind U90/U100). There are, however, a few issues with the implementation: 1. The initial HW state is always unblocked, regardless of the actual state on boot, because msi_init_rfkill only sets the SW state, regardless of ec_read_only. 2. The initial SW state corresponds to the actual state on boot, but it can't be changed afterwards, because set_device_state returns -EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth unusable if it was blocked on boot, and breaking the airplane mode if the rfkill was unblocked on boot. Address the above issues by properly initializing the HW state on ec_read_only laptops and by allowing the userspace to toggle the SW state. Don't set the SW state ourselves and let the userspace fully control it. Toggling the SW state is a no-op, however, it allows the userspace to properly toggle the airplane mode. The actual SW radio disablement is handled by the corresponding rtl818x_pci and btusb drivers that have their own rfkills. Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130. Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one") Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptopsKristian Angelov
This patch fixes setting the cmd values to 0xb3 and 0xb4. This is necessary on some TUF laptops in order to set the RGB mode. Closes: https://lore.kernel.org/platform-driver-x86/443078148.491022.1677576298133@nm83.abv.bg Signed-off-by: Kristian Angelov <kristiana2000@abv.bg> Reviewed-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/ZLlS7o6UdTUBkyqa@wyvern.localdomain Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: think-lmi: Use kfree_sensitive instead of kfreeWang Ming
key might contain private part of the key, so better use kfree_sensitive to free it. Signed-off-by: Wang Ming <machel@vivo.com> Link: https://lore.kernel.org/r/20230717101114.18966-1-machel@vivo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirksMaxim Mikityanskiy
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS method. If VGBS is not called on boot, the firmware sends an initial 0xcd event shortly after calling the BTNL method, but only if the device is booted in the laptop mode. However, if the device is booted in the tablet mode and VGBS is not called, there is no initial 0xcc event, and the input device for SW_TABLET_MODE is not registered up until the user turns the device into the laptop mode. Call VGBS on boot on this device to get the initial state of SW_TABLET_MODE in a reliable way. Tested with BIOS 1.13.1. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: intel: hid: Always call BTNL ACPI methodHans de Goede
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called. Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array. Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function. Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
2023-07-25platform/x86/amd/pmf: Notify OS power slider updateShyam Sundar S K
APMF fn8 can notify EC about the OS slider position change. Add this capability to the PMF driver so that it can call the APMF fn8 based on the changes in the Platform profile events. Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86/amd/pmf: reduce verbosity of apmf_get_system_paramsShyam Sundar S K
apmf_get_system_params() failure is not a critical event, reduce its verbosity from dev_err to dev_dbg. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551David Xu
The current code assumes that the CSC3551(multiple cs35l41) always have its interrupt pin connected to GPIO thus the IRQ can be acquired with acpi_dev_gpio_irq_get. However on some newer laptop models this is no longer the case as they have the CSC3551's interrupt pin connected to APIC. This causes smi_i2c_probe to fail on these machines. To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced for cs35l41 smi_node, and smi_get_irq function was modified so it tries to get GPIO irq resource first and if failed, tries to get APIC irq resource for cs35l41. This patch affects only the cs35l41's probing and brings no negative influence on machines that indeed have the cs35l41's interrupt pin connected to GPIO. Signed-off-by: David Xu <xuwd1@hotmail.com> Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14platform/x86/amd: pmc: Use release_mem_region() to undo ↵Hans de Goede
request_mem_region_muxed() Muxed (mem) regions will wait in request_mem_region_muxed() if the region is busy (in use by another consumer) during the call. In order to wake-up possibly waiting other consumers of the region, it must be released by a release_mem_region() call, which will actually wake up any waiters. release_mem_region() also frees the resource created by request_mem_region_muxed(), avoiding the need for the unmatched kfree(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230711095920.264308-1-hdegoede@redhat.com
2023-07-14platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tabletThomas GENTY
Fix the axes and add home button support as suggested by Hans de Goede. Signed-off-by: Thomas GENTY <tomlohave@gmail.com> Link: https://lore.kernel.org/r/20230714105117.192938-1-tomlohave@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tabletThomas GENTY
Add info for the Archos 101 Cesium Educ tablet It was tested using gslx680_ts_acpi module PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware Signed-off-by: Thomas GENTY <tomlohave@gmail.com> Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86: dell-ddv: Fix mangled list in documentationArmin Wolf
Add missing empty line necessary for sphinx to recognize the list. Also reword the first entry a little bit. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230707010333.12954-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86: dell-ddv: Improve error handlingArmin Wolf
If for some reason a external function returns -ENODEV, no error message is being displayed because the driver assumes that -ENODEV can only be returned internally if no sensors, etc where found. Fix this by explicitly returning 0 in such a case since missing hardware is no error. Also remove the now obsolete check for -ENODEV. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86/amd: pmf: Add new ACPI ID AMDI0103Shyam Sundar S K
Add new ACPI ID AMDI0103 used by upcoming AMD platform to the PMF supported list of devices. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230711100903.384151-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86/amd: pmc: Add new ACPI ID AMDI000AShyam Sundar S K
Add new ACPI ID AMDI000A used by upcoming AMD platform to the pmc supported list of devices Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230711100344.383948-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxxMario Limonciello
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming from s2idle when IOMMU is enabled. The symptoms very closely resemble that of the Lenovo issues with NVME resume. Lucienne was released in a similar timeframe as the Renoir / Cezanne Lenovo laptops and they may have similar BIOS code. Applying the same quirk to this system allows the system to work with IOMMU enabled and s2idle resume to work. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmcMario Limonciello
It turns out that some-non Lenovo systems can benefit from the quirk introduced for Lenovo systems in commit 455cd867b85b5 ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops"). So move this quirk into running from the amd-pmc driver instead. No intended functional changes. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86: int3472/discrete: set variable ↵Tom Rix
skl_int3472_regulator_second_sensor storage-class-specifier to static smatch reports drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol 'skl_int3472_regulator_second_sensor' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230702134419.3438361-1-trix@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86/intel/tpmi: Prevent overflow for cap_offsetSrinivas Pandruvada
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT (which is equal to 1024) to covert to bytes will cause overflow. This will be a problem once more TPMI features are added. This field is not used except for calculating pfs->vsec_offset. So, leave cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while calculating pfs->vsec_offset. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230622195717.3125088-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86: wmi: Replace open coded guid_parse_and_compare()Andy Shevchenko
Even though we have no issues in the code, let's replace the open coded guid_parse_and_compare(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621151155.78279-2-andriy.shevchenko@linux.intel.com Tested-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-10platform/x86: wmi: Break possible infinite loop when parsing GUIDAndy Shevchenko
The while-loop may break on one of the two conditions, either ID string is empty or GUID matches. The second one, may never be reached if the parsed string is not correct GUID. In such a case the loop will never advance to check the next ID. Break possible infinite loop by factoring out guid_parse_and_compare() helper which may be moved to the generic header for everyone later on and preventing from similar mistake in the future. Interestingly that firstly it appeared when WMI was turned into a bus driver, but later when duplicated GUIDs were checked, the while-loop has been replaced by for-loop and hence no mistake made again. Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id") Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com Tested-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-09Linux 6.5-rc1v6.5-rc1Linus Torvalds
2023-07-09MAINTAINERS 2: Electric BoogalooLinus Torvalds
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-09Merge tag 'dma-mapping-6.5-2023-07-09' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
2023-07-09Merge tag 'irq_urgent_for_v6.5_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
2023-07-09Merge tag 'x86_urgent_for_v6.5_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
2023-07-09Merge tag 'x86-core-2023-07-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
2023-07-09Merge tag 'mips_6.5_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
2023-07-09Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
2023-07-09Merge tag '6.5-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
2023-07-09Merge tag 'ntb-6.5' of https://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
2023-07-08mm: lock newly mapped VMA with corrected orderingHugh Dickins
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-08Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
2023-07-08fork: lock VMAs of the parent process when forkingSuren Baghdasaryan
When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by: David Hildenbrand <david@redhat.com> Reported-by: Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/ Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/ Reported-by: Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-08mm: lock newly mapped VMA which can be modified after it becomes visibleSuren Baghdasaryan
mmap_region adds a newly created VMA into VMA tree and might modify it afterwards before dropping the mmap_lock. This poses a problem for page faults handled under per-VMA locks because they don't take the mmap_lock and can stumble on this VMA while it's still being modified. Currently this does not pose a problem since post-addition modifications are done only for file-backed VMAs, which are not handled under per-VMA lock. However, once support for handling file-backed page faults with per-VMA locks is added, this will become a race. Fix this by write-locking the VMA before inserting it into the VMA tree. Other places where a new VMA is added into VMA tree do not modify it after the insertion, so do not need the same locking. Cc: stable@vger.kernel.org Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-08mm: lock a vma before stack expansionSuren Baghdasaryan
With recent changes necessitating mmap_lock to be held for write while expanding a stack, per-VMA locks should follow the same rules and be write-locked to prevent page faults into the VMA being expanded. Add the necessary locking. Cc: stable@vger.kernel.org Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing
2023-07-08Merge tag 'i2c-for-6.5-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - xiic patch should have been in the original pull but slipped through - mpc patch fixes a build regression - nomadik cleanup * tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mpc: Drop unused variable i2c: nomadik: Remove a useless call in the remove function i2c: xiic: Don't try to handle more interrupt events after error
2023-07-08Merge tag 'hardening-v6.5-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Check for NULL bdev in LoadPin (Matthias Kaehlcke) - Revert unwanted KUnit FORTIFY build default - Fix 1-element array causing boot warnings with xhci-hub * tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array Revert "fortify: Allow KUnit test to build without FORTIFY" dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
2023-07-08ntb: hw: amd: Fix debugfs_create_dir error checkingAnup Sharma
The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR. Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2023-07-08Merge tag 'perf-tools-for-v6.5-2-2023-07-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next Pull more perf tools updates from Namhyung Kim: "These are remaining changes and fixes for this cycle. Build: - Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1` and skip if the vmlinux has no BTF. - Replace deprecated clang -target xxx option by --target=xxx. perf record: - Print event attributes with well known type and config symbols in the debug output like below: # perf record -e cycles,cpu-clock -C0 -vv true <SNIP> ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) size 136 config 0 (PERF_COUNT_HW_CPU_CYCLES) { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER read_format ID disabled 1 inherit 1 freq 1 sample_id_all 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5 ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0 (PERF_COUNT_SW_CPU_CLOCK) { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER read_format ID disabled 1 inherit 1 freq 1 sample_id_all 1 exclude_guest 1 - Update AMD IBS event error message since it now support per-process profiling but no priviledge filters. $ sudo perf record -e ibs_op//k -C 0 Error: AMD IBS doesn't support privilege filtering. Try again without the privilege modifiers (like 'k') at the end. perf lock contention: - Support CSV style output using -x option $ sudo perf lock con -ab -x, sleep 1 # output: contended, total wait, max wait, avg wait, type, caller 19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0 15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e 4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d 1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135 8, 67608, 27404, 8451, spinlock, __queue_work+0x174 3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff 3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248 2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad 1, 24619, 24619, 24619, spinlock, rcu_core+0xd4 - Add --output option to save the data to a file not to be interfered by other debug messages. Test: - Fix event parsing test on ARM where there's no raw PMU nor supports PERF_PMU_CAP_EXTENDED_HW_TYPE. - Update the lock contention test case for CSV output. - Fix a segfault in the daemon command test. Vendor events (JSON): - Add has_event() to check if the given event is available on system at runtime. On Intel machines, some transaction events may not be present when TSC extensions are disabled. - Update Intel event metrics. Misc: - Sort symbols by name using an external array of pointers instead of a rbtree node in the symbol. This will save 16-bytes or 24-bytes per symbol whether the sorting is actually requested or not. - Fix unwinding DWARF callstacks using libdw when --symfs option is used" * tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits) perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported. perf test: Fix event parsing test on Arm perf evsel amd: Fix IBS error message perf: unwind: Fix symfs with libdw perf symbol: Fix uninitialized return value in symbols__find_by_name() perf test: Test perf lock contention CSV output perf lock contention: Add --output option perf lock contention: Add -x option for CSV style output perf lock: Remove stale comments perf vendor events intel: Update tigerlake to 1.13 perf vendor events intel: Update skylakex to 1.31 perf vendor events intel: Update skylake to 57 perf vendor events intel: Update sapphirerapids to 1.14 perf vendor events intel: Update icelakex to 1.21 perf vendor events intel: Update icelake to 1.19 perf vendor events intel: Update cascadelakex to 1.19 perf vendor events intel: Update meteorlake to 1.03 perf vendor events intel: Add rocketlake events/metrics perf vendor metrics intel: Make transaction metrics conditional perf jevents: Support for has_event function ...
2023-07-08Merge tag 'bitmap-6.5-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: "Fixes for different bitmap pieces: - lib/test_bitmap: increment failure counter properly The tests that don't use expect_eq() macro to determine that a test is failured must increment failed_tests explicitly. - lib/bitmap: drop optimization of bitmap_{from,to}_arr64 bitmap_{from,to}_arr64() optimization is overly optimistic on 32-bit LE architectures when it's wired to bitmap_copy_clear_tail(). - nodemask: Drop duplicate check in for_each_node_mask() As the return value type of first_node() became unsigned, the node >= 0 became unnecessary. - cpumask: fix function description kernel-doc notation - MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record Add linux/bits.h and linux/bitfield.h for visibility" * tag 'bitmap-6.5-rc1' of https://github.com/norov/linux: MAINTAINERS: Add bitfield.h to the BITMAP API record MAINTAINERS: Add bits.h to the BITMAP API record cpumask: fix function description kernel-doc notation nodemask: Drop duplicate check in for_each_node_mask() lib/bitmap: drop optimization of bitmap_{from,to}_arr64 lib/test_bitmap: increment failure counter properly
2023-07-08lib: dhry: fix sleeping allocations inside non-preemptable sectionGeert Uytterhoeven
The Smatch static checker reports the following warnings: lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context Indeed, dhry() does sleeping allocations inside the non-preemptable section delimited by get_cpu()/put_cpu(). Fix this by using atomic allocations instead. Add error handling, as atomic these allocations may fail. Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08kasan, slub: fix HW_TAGS zeroing with slub_debugAndrey Konovalov
Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") added precise kmalloc redzone poisoning to the slub_debug functionality. However, this commit didn't account for HW_TAGS KASAN fully initializing the object via its built-in memory initialization feature. Even though HW_TAGS KASAN memory initialization contains special memory initialization handling for when slub_debug is enabled, it does not account for in-object slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these redzones and cause false-positive slub_debug reports. To fix the issue, avoid HW_TAGS KASAN memory initialization when slub_debug is enabled altogether. Implement this by moving the __slub_debug_enabled check to slab_post_alloc_hook. Common slab code seems like a more appropriate place for a slub_debug check anyway. Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Will Deacon <will@kernel.org> Acked-by: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: kasan-dev@googlegroups.com Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08kasan: fix type cast in memory_is_poisoned_nAndrey Konovalov
Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins") introduced a bug into the memory_is_poisoned_n implementation: it effectively removed the cast to a signed integer type after applying KASAN_GRANULE_MASK. As a result, KASAN started failing to properly check memset, memcpy, and other similar functions. Fix the bug by adding the cast back (through an additional signed integer variable to make the code more readable). Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com Fixes: bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08mailmap: add entries for Heiko StuebnerHeiko Stuebner
I am going to lose my vrull.eu address at the end of july, and while adding it to mailmap I also realised that there are more old addresses from me dangling, so update .mailmap for all of them. Link: https://lkml.kernel.org/r/20230704163919.1136784-3-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08mailmap: update manpage linkHeiko Stuebner
Patch series "Update .mailmap for my work address and fix manpage". While updating mailmap for the going-away address, I also found that on current systems the manpage linked from the header comment changed. And in fact it looks like the git mailmap feature got its own manpage. This patch (of 2): On recent systems the git-shortlog manpage only tells people to See gitmailmap(5) So instead of sending people on a scavenger hunt, put that info into the header directly. Though keep the old reference around for older systems. Link: https://lkml.kernel.org/r/20230704163919.1136784-1-heiko@sntech.de Link: https://lkml.kernel.org/r/20230704163919.1136784-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08bootmem: remove the vmemmap pages from kmemleak in free_bootmem_pageLiu Shixin
commit dd0ff4d12dd2 ("bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem") fix an overlaps existing problem of kmemleak. But the problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in this case, free_bootmem_page() will call free_reserved_page() directly. Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when HAVE_BOOTMEM_INFO_NODE is disabled. Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-08MAINTAINERS: add linux-next infoRandy Dunlap
Add linux-next info to MAINTAINERS for ease of finding this data. Link: https://lkml.kernel.org/r/20230704054410.12527-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-10 02:54:21 +0000