Age | Commit message (Collapse) | Author |
|
To avoid race condition issue, we should protect the function
ipu_dmfc_init_channel() with the mutex dmfc->priv->mutex, since it
configures the register DMFC_GENERAL1 at runtime which contains
several control bits for various display channels. This matches
better with fine grained locking logic in upper layer.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The IMX dw_hdmi driver just called platform_set_drvdata() to get
your hopes up that maybe, somehow, you'd be able to retrieve the 'struct
imx_hdmi' from a pointer to the 'struct device'. You can't. When
we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which
clobbers our setting.
Let's just remove the platform_set_drvdata() to avoid dashing people's
hopes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The drm_encoder_cleanup() was missing both from the error path of
dw_hdmi_imx_bind(). This caused a crash when slub_debug was
enabled and we ended up deferring probe of HDMI at boot.
This call isn't needed from unbind() because if dw_hdmi_bind() returns
no error then it takes over the job of freeing the encoder (in
dw_hdmi_unbind).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver already advertises multi-planar YUV support, but
previously the U/V offset and stride setup was missing.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The IPU addresses multiplanar formats using a base address and relative
offsets for the secondary planes. Since those offsets must be positive
and not too large, and none of the plane parameters except the base address
may be changed while scanout is active, store the pitches and u/v offsets
and check all values against IDMAC limitations.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Let ipu_cpmem_set_yuv_planar_full take a DRM_FORMAT instead of a
V4L2_PIXFMT and allow better control over U/V stride, U offset and
V offset settings in the CPMEM.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Pull up was reported as pull down and vice versa. Fix this.
Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints"
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When the kernel is running at EL2, it doesn't need init_hyp_mode() to
configure page tables for HYP. This function also registers the CPU
hotplug and lower power notifiers that cause HYP to be re-initialised
after the CPU has been reset.
To avoid losing the register state that controls stage2 translation, move
the registering of these notifiers into init_subsystems(), and add a
is_kernel_in_hyp_mode() path to each callback.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Fixes: 1e947bad0b6 ("arm64: KVM: Skip HYP setup when already running in HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Patch 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state")
closed a big hole while opening another, smaller hole.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the error path, event_file not being NULL is used to determine
whether the event itself still needs to be free'd, so fix it up to
avoid leaking.
Reported-by: Leon Yu <chianglungyu@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 130056275ade ("perf: Do not double free")
Link: http://lkml.kernel.org/r/87twk06yxp.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Stephane reported that commit:
3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME")
introduced a regression wrt. time tracking, as easily observed by:
> This patch introduce a bug in the time tracking of events when
> multiplexing is used.
>
> The issue is easily reproducible with the following perf run:
>
> $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000
> 1.000730239 652,394 branches (66.41%)
> 1.000730239 597,809 branches (66.41%)
> 1.000730239 593,870 branches (66.63%)
> 1.000730239 651,440 branches (67.03%)
> 1.000730239 656,725 branches (66.96%)
> 1.000730239 <not counted> branches
>
> One branches event is shown as not having run. Yet, with
> multiplexing, all events should run especially with a 1s (-I 1000)
> interval. The delta for time_running comes out to 0. Yet, the event
> has run because the kernel is actually multiplexing the events. The
> problem is that the time tracking is the kernel and especially in
> ctx_sched_out() is wrong now.
>
> The problem is that in case that the kernel enters ctx_sched_out() with the
> following state:
> ctx->is_active=0x7 event_type=0x1
> Call Trace:
> [<ffffffff813ddd41>] dump_stack+0x63/0x82
> [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0
> [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0
> [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130
> [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0
> [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0
> [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60
> [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50
> [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0
>
> In that case, the test:
> if (is_active & EVENT_TIME)
>
> will be false and the time will not be updated. Time must always be updated on
> sched out.
Fix this by always updating time if EVENT_TIME was set, as opposed to
only updating time when EVENT_TIME changed.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Fixes: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME")
Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix determination of a callchain node's childlessness in
the top/report TUI, which was preventing navigating some
callchains, --stdio unnaffected (Andres Freund)
- Fix jitdump's genelf assumption that PowerPC is big endian
only (Anton Blanchard)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
commit b37d83a6a414 ("usb: Parse the new USB 3.1 SuperSpeedPlus Isoc
endpoint companion descriptor") caused a regression in 4.6-rc1 and fails
to parse SuperSpeed endpoint companion descriptors.
The new SuperSpeedPlus Isoc endpoint companion parsing code incorrectly
decreased the the remaining buffer size before comparing the size with the
expected length of the descriptor.
This lead to possible failure in reading the SuperSpeed endpoint companion
descriptor of the last endpoint, displaying a message like:
"No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0
ep 129: using minimum values"
Fix it by decreasing the size after comparing it.
Also finish all the SS endpoint companion parsing before calling SSP isoc
endpoint parsing function.
Fixes: b37d83a6a414
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix potential out-of-bounds write to urb->transfer_buffer
usbip handles network communication directly in the kernel. When receiving a
packet from its peer, usbip code parses headers according to protocol. As
part of this parsing urb->actual_length is filled. Since the input for
urb->actual_length comes from the network, it should be treated as untrusted.
Any entity controlling the network may put any value in the input and the
preallocated urb->transfer_buffer may not be large enough to hold the data.
Thus, the malicious entity is able to write arbitrary data to kernel memory.
Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.6-rc2
A couple fixes for the new SuperSpeedPlus that went
in during this merge window. Also two minor fixes
for dwc3 (one for setting endpoint naming correctly
and another to improve time spent in our reset
sequence) and an old bug fix on Atmel UDC which was
disabling endpoints when it shouldn't.
There's also a build breakage fix to the qcom phy
driver and a fix to the f_midi gadget to avoid a
race condition with f_midi_transmit().
|
|
lov_io_init_empty/release() should returns error code instead of
true on error case.
Fault IO needs to handle restart in the case of accessing HSM released
file
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/17240
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7446
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch solves a race condition that the lock may be used again
after LRU cancellation policy check. In that case, the lock may have
locked or dirty pages that makes the policy check totally useless.
The problem is solved by checking l_last_used at cancellation time
therefore it can make sure that the lock has not been used.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Reviewed-on: http://review.whamcloud.com/12603
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5781
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes the remaining occurences of checkpatch warnings
of the form of
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
after LU-4300 enqueue does not ELC anymore, however if enqueue is
agressive (ls -la of a large dir) we may exceed lru-resize limit
quickly because LRUR shrinker and recalc are called not so often.
ELC is to be restored in enqueue.
ELC also should check for the lock weight, in addition to LRUR.
ELC can also keep "skipped" locks, i.e. once checked for the weight
and left in the lru - let LRUR take care about them later.
LRUR is to be left untouched, no weight logic, otherwise LU-5727
appears and OPEN locks do not get canceled.
Xyratex-bug-id: MRP-2550
Signed-off-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-on: http://review.whamcloud.com/14342
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6390
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The changes to ldlm_cancel_aged_policy() introduced from LU-4300
was incorrect. This patch revert this part of changes.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/12448
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5727
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the policy of ELC to pick locks that have no dirty pages,
no page in writeback state, and no locked pages.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/9175
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4300
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vvp_io_setattr_lock is the only user that sets it, but it's
never checked anywhere, so could go away.
Also get rid of enum ccc_setattr_lock_type that becomes unused.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move several declarations between llite_internal.h and vvp_internal.h
with the goal of reserving the latter header for functions that
pertain to vvp_{device,object,page,...}.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13714
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ll_dirent_type_get is only used in one place in llite/dir.c,
so move it there.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge their contents into vvp_global_{init,fini}() and
{init,exit}_lustre_lite().
Rename ccc_inode_fini_* to cl_inode_fini_*.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13714
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct ccc_thread_info is used in the VVP parts of llite so rename
it struct vvp_thread_info. Rename supporting functions accordingly.
Move init code from lcommon_cl.c to vvp_dev.c
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13714
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct vvp_thread_info is used in the non-VVP parts of llite so rename
it struct ll_thread_info. Rename supporting functions accordingly.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13714
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
And move the definition from vvp_internal.h to llite_internal.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13714
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename struct ccc_req to struct vvp_req and move related functions
from lustre/llite/lcommon_cl.c to the new file lustre/llite/vvp_req.c.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13377
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move all vvp_io related functions from lustre/llite/lcommon_cl.c to
the sole file where they are used lustre/llite/vvp_io.c.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13376
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename members of struct vvp_io to used to start with vui_ rather than
cui_. Rename several instances of struct vvp_io * from cio to vio.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13363
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the contents of struct vvp_io into struct ccc_io, delete the
former, and rename the latter to struct vvp_io. Rename various ccc_io
related functions to use vvp rather than ccc.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13351
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ever since removal of the the unused function ll_ra_read_get(),
the struct ll_ra_read members lrr_reader and lrr_linkage and
the struct ll_readahead_state member ras_read_beads unnecessary
so remove them.
In struct vvp_io replace the struct ll_ra_read cui_bead member with
cui_ra_start and cui_ra_count.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13347
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename struct ccc_lock to struct vvp_lock and merge the CCC lock
methods into the VVP lock methods.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13088
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename struct ccc_page to struct vvp_page and remove obsolete CCC page
methods.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13086
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename struct ccc_object to struct vvp_object and merge the CCC object
methods into the VVP object methods.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13077
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename struct ccc_device to struct vvp_device and merge the CCC device
methods into the VVP device methods.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/13075
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the definition of struct cl_client_cache to
lustre/include/cl_object.h and move the rest of
lustre/include/lclient.h in to lustre/llite/vvp_internal.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/12592
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5971
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we are doing a partial IO on both first and last page,
the logic currently only call cl_page_clip on the first page, which
will end up with a incorrect i_size.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Reviewed-on: http://review.whamcloud.com/11630
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5552
Reviewed-by: Ian Costello <costello.ian@gmail.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Li Xi <pkuelelixi@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Writing thread already locked page #1, and then wait for the
Writeback bit of page #2;
Ptlrpc thread is composing a write RPC, so it sets Writeback on
page #2 and tries to lock page #1 to make it ready.
Deadlocked.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/9036
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4540
Reviewed-by: wangdi <di.wang@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The original code was wrong which clipped page incorrectly for
partial pages started with zero.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/8531
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4201
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update comments to reflect current cl_lock situations.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/13137
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6046
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In this patch, the cl_lock cache is eliminated. cl_lock is turned
into a cacheless data container for the requirements of locks to
complete the IO. cl_lock is created before I/O starts and destroyed
when the I/O is complete.
cl_lock depends on LDLM lock to fulfill lock semantics. LDLM lock
is attached to cl_lock at OSC layer. LDLM lock is still cacheable.
Two major methods are supported for cl_lock: clo_enqueue and
clo_cancel. A cl_lock is enqueued by cl_lock_request(), which will
call clo_enqueue() methods for each layer to enqueue the lock.
At the LOV layer, if a cl_lock consists of multiple sub cl_locks,
each sub locks will be enqueued correspondingly. At OSC layer, the
lock enqueue request will tend to reuse cached LDLM lock; otherwise
a new LDLM lock will have to be requested from OST side.
cl_lock_cancel() must be called to release a cl_lock after use.
clo_cancel() method will be called for each layer to release the
resource held by this lock. At OSC layer, the reference count of LDLM
lock, which is held at clo_enqueue time, is released.
LDLM lock can only be canceled if there is no cl_lock using it.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/10858
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3259
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To make cl_sync_io interfaces not just wait for pages, but to be
a generic synchronization mechanism.
Also remove cl_io_cancel that became not used.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/8656
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4198
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was a compat code from the time it had ia_attr_flags.
Instead convert all the cryptic callers that did
((struct ll_iattr *)&op_data->op_attr)->ia_attr_flags into
direct access to op_data->op_attr_flags
This also makes lustre/include/linux/obd.h not needed anymore,
so remove it.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In llite remove the wrapper functions and macros:
cl_i2info()
cl_i2sbi()
cl_iattr2fd()
cl_inode_info
cl_inode_mode()
cl_inode_{a,m,c}time()
cl_isize_{read,write,write_nolock}()
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/12850
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the definition of struct client_obd_lock and the functions
client_obd_list_{init,lock,unlock,done}(). Use spinlock_t for the
cl_{loi,lru}_list_lock members of struct client_obd and call
spin_{lock,unlock}() directly.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In struct lmv_obd rename the init_mutex member to
lmv_init_mutex. Remove the compat macros lmv_init_{lock,unlock}() and
use mutex_{lock,unlock}(&lmv->lmv_init_mutex) instead.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/12115
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In struct ll_inode_info remove the struct ost_lvb lli_lvb member and
replace it with obd_time lli_{a,m,c}time. Rename ll_merge_lvb() to
ll_merge_attr(). Remove cl_merge_lvb() and replace calls to it with
calls to ll_merge_attr().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/12849
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It used to check each page in the readahead window is covered by
a lock underneath, now cpo_page_is_under_lock() provides @max_index
to help decide the maximum ra window. @max_index can be modified by
OSC to extend the maximum lock region, to align stripe boundary at
LOV, and to make sure the readahead region at least covers read
region at LLITE layer.
After this is done, usually readahead code calls
cpo_page_is_under_lock() for each stripe.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/8523
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3321
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|