summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-19drm/i915/audio: fix audio code enable/disable pipe loggingJani Nikula
Need to use pipe_name(pipe) instead of pipe directly. Fixes: 1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com (cherry picked from commit 945ae909aa76f55ac8c9e95feb3683512d39134a)
2022-05-19drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomapMaarten Lankhorst
When removing short term pins, I've changed the the batch buffer pinning for relocation to use __i915_vma_pin, because i915_gem_object_ggtt_pin_ww was destroying the old vma. This caused regressions, because the functions are not identical. Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again on ggtt-only platforms, but only if the batch can be pinned without being moved. Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.") Cc: Matthew Auld <matthew.auld@intel.com> Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806 Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-05-19nfp: flower: support ct merging when mangle action existsYinjun Zhang
Current implementation of ct merging doesn't support the case that the fields mangling in pre_ct rules are matched in post_ct rules. This change is to support merging when mangling mac address, ip address, tos, ttl and l4 port. VLAN and MPLS mangling is not involved yet. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220518075055.130649-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19net: fec: Avoid allocating rx buffer using ATOMIC in ndo_openMichael Trimarchi
Make ndo_open less sensitive to memory pressure. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220518062007.10056-1-michael@amarulasolutions.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19video: fbdev: pxa3xx-gcu: release the resources correctly in ↵Yang Yingliang
pxa3xx_gcu_probe/remove() In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will leads some resource leaked, so adjust the sequence to handle the error correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers() need be called. In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19rtc: rzn1: fix platform_no_drv_owner.cocci warningYang Li
Remove .owner field if calls are used which set it automatically. ./drivers/rtc/rtc-rzn1.c:411:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220518232445.79156-1-yang.lee@linux.alibaba.com
2022-05-19video: fbdev: omapfb: simplify the return expression of nec_8048_connect()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setupMiaoqian Lin
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19drm/i915: Fix CFI violation with show_dynamic_id()Nathan Chancellor
When an attribute group is created with sysfs_create_group(), the ->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show(). kobj_attr_show() uses container_of() to get the ->show() callback from the attribute it was passed, meaning the ->show() callback needs to be the same type as the ->show() callback in 'struct kobj_attribute'. However, show_dynamic_id() has the type of the ->show() callback in 'struct device_attribute', which causes a CFI violation when opening the 'id' sysfs node under drm/card0/metrics. This happens to work because the layout of 'struct kobj_attribute' and 'struct device_attribute' are the same, so the container_of() cast happens to allow the ->show() callback to still work. Change the type of show_dynamic_id() to match the ->show() callback in 'struct kobj_attributes' and update the type of sysfs_metric_id to match, which resolves the CFI violation. Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 18fb42db05a0b93ab5dd5eab5315e50eaa3ca620) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.cImre Deak
Fix the following sparse warnings: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Reported-by: Jani Nikula <jani.nikula@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com (cherry picked from commit 7ecc3cc8a7b39f08eee9aea7b718187583342a70) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19drm/i915/gt: Fix build error without CONFIG_PMYueHaibing
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’: drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration] 276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Move sysfs_gt_attribute_* macros out of #ifdef block to fix this. Fixes: 56a709cf7746 ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220506032652.1856-1-yuehaibing@huawei.com (cherry picked from commit 09708b6d82ef473de91c49d90f35e38b0db463f5) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1Saurabh Sengar
This patch fixes a bug where GEN1 VMs doesn't allow resolutions greater than 64 MB size (eg 7680x4320). Unnecessary PCI check limits Gen1 VRAM to legacy PCI BAR size only (ie 64MB). Thus any, resolution requesting greater then 64MB (eg 7680x4320) would fail. MMIO region assigning this memory shouldn't be limited by PCI bar size. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19x86/sev: Mark the code returning to user space as syscall gapLai Jiangshan
When returning to user space, %rsp is user-controlled value. If it is a SNP-guest and the hypervisor decides to mess with the code-page for this path while a CPU is executing it, a potential #VC could hit in the syscall return path and mislead the #VC handler. So make ip_within_syscall_gap() return true in this case. Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220412124909.10467-1-jiangshanlai@gmail.com
2022-05-19riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOLSunil V L
Add support for getting the boot hart ID from the Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT based approach since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com [ardb: minor tweaks for coding style and whitespace] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable GFX deviceJoel Stanley
Enable the GFX device with a framebuffer memory region. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-3-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add GFX node to AST2600Joel Stanley
The GFX device is present in the AST2600 SoC. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-2-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable virtual hubHoward Chiu
Enable Aspeed VHub for HID emulation Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23155E8A6193118544A7DBF3E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable video engineHoward Chiu
Enable video engine and reserve memory for it. Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23159B914BF7EF937FEDD2B5E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIOBrandon Wyman
The IBM Everest and Rainier systems have a GPIO line that goes to the power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync input history. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220421213638.1151193-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add Nuvia DC-SCM BMCGraeme Gregory
Add initial version of device tree for Nuvia DC-SCM BMC which is equipped with Aspeed AST2600 BMC SoC. Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add sample averaging for ADM1278Potin Lai
set number of sample averaging to 128 for both PWR_AVG and VI_AVG Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add eeprom node on each sledPotin Lai
Add eeprom (24c26) on each sled for storing sled fru information. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add pca9536 node on each sledPotin Lai
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41. P0: SLEDX_SWD_MUX P1: SLEDX_XRES_SWD_N P2: SLEDX_CLKREQ_N P3: SLEDX_PCIE_PWR_EN Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: update gpio0 line namesPotin Lai
Update GPIO line names based on DVT schematic Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: Enable mdio0 busPotin Lai
Enable mdio0 bus based on DVT schematic. TODO: Add Marvell 88E6191 Switch Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smcPotin Lai
Due to DVT schematic has stable spi signal, switch back to aspeed-smc driver for improving performance. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: enable ehci0 device nodePotin Lai
Enable ehci0 node for USB2 host feature Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.Andrew Lunn
It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19ARM: dts: aspeed: Add USB2.0 device controller nodeNeal Liu
Add USB2.0 device controller(udc) node to device tree for AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220518062043.1075360-3-neal_liu@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19USB: serial: option: add Quectel BG95 modemCarl Yin(殷张成)
The BG95 modem has 3 USB configurations that are configurable via the AT command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem enumerate with the following interfaces, respectively: "modem": Diag + GNSS + Modem + Modem "ecm" : Diag + GNSS + Modem + ECM "rmnet": Diag + GNSS + Modem + QMI Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE) A detailed description of the USB configuration for each mode follows: +QCFGEXT: "usbnet","modem" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","ecm" ------------------------ T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","rmnet" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-18ptp: ocp: change sysfs attr group handlingJonathan Lemon
In the detach path, the driver calls sysfs_remove_group() for the groups it believes has been registered. However, if the group was never previously registered, then this causes a splat. Instead, compute the groups that should be registered in advance, and then call sysfs_create_groups(), which registers them all at once. Update the error handling appropriately. Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating") Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net/mlx5: fix multiple definitions of mlx5_lag_mpesw_init / ↵Jakub Kicinski
mlx5_lag_mpesw_cleanup static inline is needed in the header. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220518183022.2034373-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge tag 'amd-drm-next-5.19-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-18: amdgpu: - Misc code cleanups - Additional SMU 13.x enablement - Smartshift fixes - GFX11 fixes - Support for SMU 13.0.4 - SMU mutex fix - Suspend/resume fix amdkfd: - static checker fix - Doorbell/MMIO resource handling fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518205621.5741-1-alexander.deucher@amd.com
2022-05-19Merge tag 'amd-drm-fixes-5.18-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-18: amdgpu: - Suspend/resume regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518202045.9123-1-alexander.deucher@amd.com
2022-05-19ARM: dts: aspeed-g4: Set spi-max-frequency for all flashesTao Ren
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC controller to ensure the clock frequency is calculated correctly. Suggested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Enable Dual SPI RX transfersCédric Le Goater
All these controllers support at least Dual SPI. Update the DTs. Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllersCédric Le Goater
This is compatible with the current driver and addresses issues when running 'make dt_binding_check'. Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1Howard Chiu
Since mac0/1 and mac2/3 are physically located on different die, they have different properties by nature, which is mac0/1 has smaller delay step. The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid' which enables the RX interface delay from the PHY chip. Refer page 45 of SDK User Guide v08.00 https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB") Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23152A548AAE81140B57DD69E6E09@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-18selftests: forwarding: fix missing backslashJoachim Wiberg
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to not be installed. Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18sfc: siena: Have a unique wrapper ifndef for efx channels headerSaeed Mahameed
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be EFX_SIENA_CHANNELS_H to avoid build system confusion. This fixes the following build break: drivers/net/ethernet/sfc/ptp.c:2191:28: error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’? 2191 | .copy = efx_copy_channel, Fixes: 6e173d3b4af9 ("sfc: Copy shared files needed for Siena (part 1)") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'octeon_ep-fix-the-error-handling-path-of-octep_request_irqs'Jakub Kicinski
Christophe says: ==================== octeon_ep: Fix the error handling path of octep_request_irqs() I send a small serie to ease review and because I'm sighly less confident with the 2nd patch. ==================== Link: https://lore.kernel.org/r/cover.1652819974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix irq releasing in the error handling path of octep_request_irqs()Christophe JAILLET
When taken, the error handling path does not undo correctly what has already been allocated. Introduce a new loop index, 'j', in order to simplify the error handling path and rewrite part of it. It is now written with the same logic and intermediate variables used when resources are allocated. This is much more straightforward. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix a memory leak in the error handling path of octep_request_irqs()Christophe JAILLET
'oct->non_ioq_irq_names' is not freed in the error handling path of octep_request_irqs(). Add the missing kfree(). Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Veerasenareddy Burru <vburru@marvell.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'adin-add-support-for-clock-output'Jakub Kicinski
Josua Mayer says: ==================== adin: add support for clock output This patch series adds support for configuring the two clock outputs of adin 1200 and 1300 PHYs. Certain network controllers require an external reference clock which can be provided by the PHY. One of the replies to v1 was asking why the common clock framework isn't used. Currently no PHY driver has implemented providing a clock to the network controller. Instead they rely on vendor extensions to make the appropriate configuration. For example ar8035 uses qca,clk-out-frequency - this patchset aimed to replicate the same functionality. Finally the 125MHz free-running clock is enabled in the device-tree for SolidRun i.MX6 SoMs, to support revisions 1.9 and later, where the original phy has been replaced with an adin 1300. To avoid introducing new warning messages during boot for SoMs before rev 1.9, the status field of the new phy node is disabled by default, and will be enabled by U-Boot on demand. ==================== Link: https://lore.kernel.org/r/20220517085143.3749-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9Josua Mayer
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300, add an entry for it next to the original. As Russell King pointed out, additional phy nodes cause warnings like: mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing To avoid this the new node has its status set to disabled. U-Boot will be modified to enable the appropriate phy node after probing. The existing ar8035 nodes have to stay enabled by default to avoid breaking existing systems when they update Linux only. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net: phy: adin: add support for clock outputJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18dt-bindings: net: adin: document phy clock output propertiesJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add DT properties to configure both pins. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. However SyncE should be configured dynamically at runtime, so it is explicitly omitted in this binding. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Reduce number of hardware offload retries from flowtable datapath which might hog system with retries, from Felix Fietkau. 2) Skip neighbour lookup for PPPoE device, fill_forward_path() already provides this and set on destination address from fill_forward_path for PPPoE device, also from Felix. 4) When combining PPPoE on top of a VLAN device, set info->outdev to the PPPoE device so software offload works, from Felix. 5) Fix TCP teardown flowtable state, races with conntrack gc might result in resetting the state to ESTABLISHED and the time to one day. Joint work with Oz Shlomo and Sven Auhagen. 6) Call dst_check() from flowtable datapath to check if dst is stale instead of doing it from garbage collector path. 7) Disable register tracking infrastructure, either user-space or kernel need to pre-fetch keys inconditionally, otherwise register tracking assumes data is already available in register that might not well be there, leading to incorrect reductions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown netfilter: nft_flow_offload: fix offload with pppoe + vlan net: fix dev_fill_forward_path with pppoe + bridge netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices netfilter: flowtable: fix excessive hw offload attempts after failure ==================== Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18drm/msm/dpu: handle pm_runtime_get_sync() errors in bind pathAbhinav Kumar
If there are errors while trying to enable the pm in the bind path, it will lead to unclocked access of hw revision register thereby crashing the device. This will not address why the pm_runtime_get_sync() fails but at the very least we should be able to prevent the crash by handling the error and bailing out earlier. changes in v2: - use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
generated by cgit (git 2.34.1) at 2025-09-24 09:11:58 +0000