| Age | Commit message (Collapse) | Author |
|---|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register().
We don't need the device node after it.
Add missing of_node_put() to avoid refcount leak.
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable ARCH_HAS_GCOV_PROFILE_ALL so that CONFIG_GCOV_PROFILE_ALL can be
selected on UML. I didn't need to explicitly disable GCOV on anything
to get this to work on the configs I tested.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If DMA (PCI over virtio) is enabled, then some drivers may
enable CONFIG_DMA_OPS as well, and then we pull in the x86
definition of get_arch_dma_ops(), which uses the dma_ops
symbol, which isn't defined.
Since we don't have real DMA ops nor any kind of IOMMU fix
this in the simplest possible way: pull in the asm-generic
file instead of inheriting the x86 one. It's not clear why
those drivers that do (e.g. VDPA) "select DMA_OPS", and if
they'd even work with this, but chances are nobody will be
wanting to do that anyway, so fixing the build failure is
good enough.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release
the refcount in error case.
Add missing of_node_put() to avoid refcount leak.
Fixes: b1f66a5bee07 ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support")
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even if daemon network is deprecated, some configurations may
still use it (e.g. Debian), and not want to default to the
/tmp/uml.ctl socket location. Allow configuring the default
socket location.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.
Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kallsyms program supports --absolute-percpu option but does not display
it in the usage message, fix it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When building an external module, if users don't need to separate the
compilation output and source code, they run the following command:
"make -C $(LINUX_SRC_DIR) M=$(PWD)". At this point, "$(KBUILD_EXTMOD)"
and "$(src)" are the same.
If they need to separate them, they run "make -C $(KERNEL_SRC_DIR)
O=$(KERNEL_OUT_DIR) M=$(OUT_DIR) src=$(PWD)". Before running the
command, they need to copy "Kbuild" or "Makefile" to "$(OUT_DIR)" to
prevent compilation failure.
So the kernel should change the included path to avoid the copy operation.
Signed-off-by: Jing Leng <jleng@ambarella.com>
[masahiro: I do not think "M=$(OUT_DIR) src=$(PWD)" is the official way,
but this patch is a nice clean up anyway.]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make the default terminal emulator configurable so e.g.
Debian can set it to x-terminal-emulator instead of the
current default of xterm.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
|
|
Pull rdma updates from Jason Gunthorpe:
"Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static
tools
- Clean the some of the kernel caps, reducing the historical stealth
uAPI leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs
layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core
to free them
- Several rc quality bug fixes for hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (67 commits)
RDMA/rtrs-clt: Fix one kernel-doc comment
RDMA/hfi1: Remove all traces of diagpkt support
RDMA/hfi1: Consolidate software versions
RDMA/hfi1: Remove pointless driver version
RDMA/hfi1: Fix potential integer multiplication overflow errors
RDMA/hfi1: Prevent panic when SDMA is disabled
RDMA/hfi1: Prevent use of lock before it is initialized
RDMA/rxe: Fix an error handling path in rxe_get_mcg()
IB/core: Fix typo in comment
RDMA/core: Fix typo in comment
IB/hf1: Fix typo in comment
IB/qib: Fix typo in comment
IB/iser: Fix typo in comment
RDMA/mlx4: Avoid flush_scheduled_work() usage
IB/isert: Avoid flush_scheduled_work() usage
RDMA/mlx5: Remove duplicate pointer assignment in mlx5_ib_alloc_implicit_mr()
RDMA/qedr: Remove unnecessary synchronize_irq() before free_irq()
RDMA/hns: Use hr_reg_read() instead of remaining roce_get_xxx()
RDMA/hns: Use hr_reg_xxx() instead of remaining roce_set_xxx()
RDMA/irdma: Add SW mechanism to generate completions on error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fix from Kees Cook:
"This fixes an unlucky build race condition when using the GCC plugins,
noticed by a few folks.
- Avoid GCC plugins needing utsrelease.h build target (Masahiro Yamada)"
* tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: use KERNELVERSION for plugin version
|
|
Pull nfsd updates from Chuck Lever:
"We introduce 'courteous server' in this release. Previously NFSD would
purge open and lock state for an unresponsive client after one lease
period (typically 90 seconds). Now, after one lease period, another
client can open and lock those files and the unresponsive client's
lease is purged; otherwise if the unresponsive client's open and lock
state is uncontended, the server retains that open and lock state for
up to 24 hours, allowing the client's workload to resume after a
lengthy network partition.
A longstanding issue with NFSv4 file creation is also addressed.
Previously a file creation can fail internally, returning an error to
the client, but leave the newly created file in place as an artifact.
The file creation code path has been reorganized so that internal
failures and race conditions are less likely to result in an unwanted
file creation.
A fault injector has been added to help exercise paths that are run
during kernel metadata cache invalidation. These caches contain
information maintained by user space about exported filesystems. Many
of our test workloads do not trigger cache invalidation.
There is one patch that is needed to support PREEMPT_RT and a fix for
an ancient 'sleep while spin-locked' splat that seems to have become
easier to hit since v5.18-rc3"
* tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (36 commits)
NFSD: nfsd_file_put() can sleep
NFSD: Add documenting comment for nfsd4_release_lockowner()
NFSD: Modernize nfsd4_release_lockowner()
NFSD: Fix possible sleep during nfsd4_release_lockowner()
nfsd: destroy percpu stats counters after reply cache shutdown
nfsd: Fix null-ptr-deref in nfsd_fill_super()
nfsd: Unregister the cld notifier when laundry_wq create failed
SUNRPC: Use RMW bitops in single-threaded hot paths
NFSD: Clean up the show_nf_flags() macro
NFSD: Trace filecache opens
NFSD: Move documenting comment for nfsd4_process_open2()
NFSD: Fix whitespace
NFSD: Remove dprintk call sites from tail of nfsd4_open()
NFSD: Instantiate a struct file when creating a regular NFSv4 file
NFSD: Clean up nfsd_open_verified()
NFSD: Remove do_nfsd_create()
NFSD: Refactor NFSv4 OPEN(CREATE)
NFSD: Refactor NFSv3 CREATE
NFSD: Refactor nfsd_create_setattr()
NFSD: Avoid calling fh_drop_write() twice in do_nfsd_create()
...
|
|
In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit()
does not provide any ordering guarantee as test_bit() is not an atomic
operation. This, added to the fact that the spin_trylock() call at
the beginning of qdisc_run_begin() does not guarantee acquire
semantics if it does not grab the lock, makes it possible for the
following statement :
if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))
to be executed before an enqueue operation called before
qdisc_run_begin().
As a result the following race can happen :
CPU 1 CPU 2
qdisc_run_begin() qdisc_run_begin() /* true */
set(MISSED) .
/* returns false */ .
. /* sees MISSED = 1 */
. /* so qdisc not empty */
. __qdisc_run()
. .
. pfifo_fast_dequeue()
----> /* may be done here */ .
| . clear(MISSED)
| . .
| . smp_mb __after_atomic();
| . .
| . /* recheck the queue */
| . /* nothing => exit */
| enqueue(skb1)
| .
| qdisc_run_begin()
| .
| spin_trylock() /* fail */
| .
| smp_mb__before_atomic() /* not enough */
| .
---- if (test_bit(MISSED))
return false; /* exit */
In the above scenario, CPU 1 and CPU 2 both try to grab the
qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the
bypass code path, where it emits its skb then calls __qdisc_run().
CPU1 fails, sets MISSED and goes down the traditionnal enqueue() +
dequeue() code path. But when executing qdisc_run_begin() for the
second time, after enqueuing its skbuff, it sees the MISSED bit still
set (by itself) and consequently chooses to exit early without setting
it again nor trying to grab the spinlock again.
Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue
and found it empty, so it returned.
At the end of the sequence, we end up with skb1 enqueued in the
backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set,
and no __netif_schedule() called made. skb1 will now linger in the
qdisc until somebody later performs a full __qdisc_run(). Associated
to the bypass capacity of the qdisc, and the ability of the TCP layer
to avoid resending packets which it knows are still in the qdisc, this
can lead to serious traffic "holes" in a TCP connection.
We fix this by replacing the smp_mb__before_atomic() / test_bit() /
set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin()
by a single test_and_set_bit() call, which is more concise and
enforces the needed memory barriers.
Fixes: 89837eb4b246 ("net: sched: add barrier to ensure correct ordering for lockless qdisc")
Signed-off-by: Vincent Ray <vray@kalrayinc.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the moment, if devm_of_phy_get() returns an error the serdes
simply isn't set. While it is bad to ignore an error in general, there
is a particular bug that network isn't working if the serdes driver is
compiled as a module. In that case, devm_of_phy_get() returns
-EDEFER_PROBE and the error is silently ignored.
The serdes is optional, it is not there if the port is using RGMII, in
which case devm_of_phy_get() returns -ENODEV. Rearrange the error
handling so that -ENODEV will be handled but other error codes will
abort the probing.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220525231239.1307298-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix UAF when creating non-stateful expression in set.
2) Set limit cost when cloning expression accordingly, from Phil Sutter.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_limit: Clone packet limits' cost value
netfilter: nf_tables: disallow non-stateful expression in sets earlier
====================
Link: https://lore.kernel.org/r/20220526205411.315136-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The parameter name in comments of event_trigger_separate_filter() is
inconsistent with actual parameter name, fix it.
Link: https://lkml.kernel.org/r/20220526072957.165655-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit:
4b9a8dca0e58 ("x86/idt: Remove the tracing IDT completely")
removed the 'tracing IDT' from arch/x86/kernel/tracepoint.c,
but left related comment. So that the comment become anachronistic.
Just remove the comment.
Link: https://lkml.kernel.org/r/20220526110831.175743-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 4b9a8dca0e58 ("x86/idt: Remove the tracing IDT completely")
removed the tracing IDT from the file arch/x86/kernel/tracepoint.c,
but left the related headers unused, remove it.
Link: https://lkml.kernel.org/r/20220525012827.93464-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
We see the following GPF when register_ftrace_direct fails:
[ ] general protection fault, probably for non-canonical address \
0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[...]
[ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70
[ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...]
[ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206
[ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b
[ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0
[ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001
[ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0
[ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000
[ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000
[ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0
[ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ ] Call Trace:
[ ] <TASK>
[ ] register_ftrace_direct+0x54/0x290
[ ] ? render_sigset_t+0xa0/0xa0
[ ] bpf_trampoline_update+0x3f5/0x4a0
[ ] ? 0xffffffffa00a3000
[ ] bpf_trampoline_link_prog+0xa9/0x140
[ ] bpf_tracing_prog_attach+0x1dc/0x450
[ ] bpf_raw_tracepoint_open+0x9a/0x1e0
[ ] ? find_held_lock+0x2d/0x90
[ ] ? lock_release+0x150/0x430
[ ] __sys_bpf+0xbd6/0x2700
[ ] ? lock_is_held_type+0xd8/0x130
[ ] __x64_sys_bpf+0x1c/0x20
[ ] do_syscall_64+0x3a/0x80
[ ] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ ] RIP: 0033:0x7fa9421defa9
[ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...]
[ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9
[ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011
[ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000
[ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001
[ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001
[ ] </TASK>
[ ] Modules linked in: klp_vm(OK)
[ ] ---[ end trace 0000000000000000 ]---
One way to trigger this is:
1. load a livepatch that patches kernel function xxx;
2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now);
3. repeat #2 => gpf.
This is because the entry is added to direct_functions, but not removed.
Fix this by remove the entry from direct_functions when
register_ftrace_direct fails.
Also remove the last trailing space from ftrace.c, so we don't have to
worry about it anymore.
Link: https://lkml.kernel.org/r/20220524170839.900849-1-song@kernel.org
Cc: stable@vger.kernel.org
Fixes: 763e34e74bb7 ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The name in comments of parameter "filter_string" in function
create_filter is annotated as "filter_str", just fix it.
Link: https://lkml.kernel.org/r/20220524063937.52873-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Functions in trace_preemptirq.c could be invoked from early interrupt
code that bypasses kcov trace function's in_task() check. Disable kcov
on this file to reduce random code coverage.
Link: https://lkml.kernel.org/r/20220523063033.1778974-1-liu3101@purdue.edu
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitialized.UndefReturn]
return ret;
Link: https://lkml.kernel.org/r/20220522061826.1751-1-gautammenghani201@gmail.com
Cc: stable@vger.kernel.org
Fixes: 8993665abcce ("tracing/boot: Support multiple handlers for per-event histogram")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-81-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
All instances of the function ftrace_arch_modify_prepare() and
ftrace_arch_modify_post_process() return zero. There's no point in
checking their return value. Just have them be void functions.
Link: https://lkml.kernel.org/r/20220518023639.4065-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The pointer is assigned to "type->name" anyway. no need to
initialize with "preemption".
Link: https://lkml.kernel.org/r/20220513075221.26275-1-liqiong@nfschina.com
Signed-off-by: liqiong <liqiong@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The "char []" string form declares a single variable. It is better
than "char *" which creates two variables in the final assembly.
Link: https://lkml.kernel.org/r/20220512143230.28796-1-liqiong@nfschina.com
Signed-off-by: liqiong <liqiong@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There is no need to wakeup the timerlat/ thread if stop tracing is hit
at the timerlat's IRQ handler.
Return before waking up timerlat's thread.
Link: https://lkml.kernel.org/r/b392356c91b56aedd2b289513cc56a84cf87e60d.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If print_stack and stop_tracing_us are set, and stop_tracing_us is hit
with latency higher than or equal to print_stack, print the
stack at the IRQ handler as it is useful to define the root cause for
the IRQ latency.
Link: https://lkml.kernel.org/r/fd04530ce98ae9270e41bb124ee5bf67b05ecfed.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the notification of a new max latency is sent from
timerlat's IRQ handler anytime a new max latency is found.
While this behavior is not wrong, the send IPI overhead itself
will increase the thread latency and that is not the desired
effect (tracing overhead).
Moreover, the thread will notify a new max latency again because
the thread latency as it is always higher than the IRQ latency
that woke it up.
The only case in which it is helpful to notify a new max latency
from IRQ is when stop tracing (for the IRQ) is set, as in this
case, the thread will not be dispatched.
Notify a new max latency from the IRQ handler only if stop tracing is
set for the IRQ handler.
Link: https://lkml.kernel.org/r/2c2d9a56c0886c8402ba320de32856cbbb10c2bb.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Clark Williams <williams@redhat.com>
Fixes: a955d7eac177 ("trace: Add timerlat tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Max Filippov reported:
When building kernel with CONFIG_KRETPROBES=n kernel/kprobes.c
compilation fails with the following messages:
kernel/kprobes.c: In function ‘recycle_rp_inst’:
kernel/kprobes.c:1273:32: error: implicit declaration of function
‘get_kretprobe’
kernel/kprobes.c: In function ‘kprobe_flush_task’:
kernel/kprobes.c:1299:35: error: ‘struct task_struct’ has no member
named ‘kretprobe_instances’
This came from the commit d741bf41d7c7 ("kprobes: Remove
kretprobe hash") which introduced get_kretprobe() and
kretprobe_instances member in task_struct when CONFIG_KRETPROBES=y,
but did not make recycle_rp_inst() and kprobe_flush_task()
depending on CONFIG_KRETPORBES.
Since those functions are only used for kretprobe, move those
functions into #ifdef CONFIG_KRETPROBE area.
Link: https://lkml.kernel.org/r/165163539094.74407.3838114721073251225.stgit@devnote2
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Setting set_event_pid with trailing whitespace lead to endless write
system calls like below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 4
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
....
This is because, the result of trace_get_user's are not returned when it
read at least one pid. To fix it, update read variable even if
parser->idx == 0.
The result of applied patch is below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 5
close(1) = 0
Link: https://lkml.kernel.org/r/20220503050546.288911-1-vvghjk1234@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: linuxgeek@linuxgeek.io
Cc: stable@vger.kernel.org
Fixes: 4909010788640 ("tracing: Add set_event_pid directory for future use")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers")
CC: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tracing_set_trace_write() function just removes the trailing whitespace
from the user supplied tracer name, but the leading whitespace should also
be removed.
In addition, if the user supplied tracer name contains only a few
whitespace characters, the first one will not be removed using the current
method, which results it a single whitespace character left in the buf.
To fix all of these issues, we use strim() to correctly remove both the
leading and trailing whitespace.
Link: https://lkml.kernel.org/r/20220121095623.1826679-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The ftrace_process_locs() function may return -ENOMEM error code, which
should be handled by the callers.
Link: https://lkml.kernel.org/r/20220120065949.1813231-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Creating tracefs entries with tracefs_create_file() followed by pr_warn()
is tedious and repetitive, we can use trace_create_file() to simplify
this process and make the code more readable.
Link: https://lkml.kernel.org/r/20220114131052.534382-1-ytcoode@gmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that sets up logged xattr updates out of libxfs and into
xfs_xattr.c so that libxfs no longer has to know about xlog_* functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that enables logged xattr updates out of "lib"xlog and into
xfs_xattr.c so that it no longer has to know about xlog_* functions.
While we're at it, give xfs_xattr.c its own header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Since LARP is an experimental debug-only feature, we should try to warn
about it being in use once per mount, not once per reboot.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Currently, we don't have a consistent story around logging when an
EXPERIMENTAL feature gets turned on at runtime -- online fsck and shrink
log a message once per day across all mounts, and the recently merged
LARP mode only ever does it once per insmod cycle or reboot.
Because EXPERIMENTAL tags are supposed to go away eventually, convert
the existing daily warnings into state flags that travel with the mount,
and warn once per mount. Making this an opstate flag means that we'll
be able to capture the experimental usage in the ftrace output too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
There's no need to spam the logs every time we clear the log incompat
flags -- if someone is periodically using one of these features, they'll
be cleared every time the log tries to clean itself, which can get
pretty chatty:
$ dmesg | grep -i clear
[ 5363.894711] XFS (sdd): Clearing log incompat feature flags.
[ 5365.157516] XFS (sdd): Clearing log incompat feature flags.
[ 5369.388543] XFS (sdd): Clearing log incompat feature flags.
[ 5371.281246] XFS (sdd): Clearing log incompat feature flags.
These aren't high value messages either -- nothing's gone wrong, and
nobody's trying anything tricky.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Pull OpenRISC updates from Stafford Horne:
- A few sparse warning fixups and other cleanups I noticed when working
on a recent TLB bug found on a new OpenRISC core bring up.
- A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
platforms when running CI tests
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Allow power off handler overriding
openrisc: Remove unused IMMU tlb workardound
openrisc/fault: Fix symbol scope warnings
openrisc/delay: Add include to fix symbol not declared warning
openrisc/time: Fix symbol scope warnings
openrisc/traps: Declare unhandled_exception for asmlinkage
openrisc/traps: Remove die_if_kernel function
openrisc/traps: Declare file scope symbols as static
openrisc: Update litex defconfig to support glibc userland
openrisc: Pretty print show_registers memory dumps
openrisc: Add syscall details to emergency syscall debugging
openrisc: Add support for liteuart emergency printing
openrisc: Cleanup emergency print handling
openrisc: Add gcc machine instruction flag configuration
openrisc: define nop command for simulator reboot
openrisc: remove bogus nops and shutdowns
openrisc: fix typos in comments
|
|
While we're messing around with how recovery allocates and frees the
buffer cancellation table, convert the allocation to use kmalloc_array
instead of the old kmem_alloc APIs, and make it handle a null return,
even though that's not likely.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
If log recovery fails, we free the memory used by the buffer
cancellation buckets, but we don't actually traverse each bucket list to
free the individual xfs_buf_cancel objects. This leads to a memory
leak, as reported by kmemleak in xfs/051:
unreferenced object 0xffff888103629560 (size 32):
comm "mount", pid 687045, jiffies 4296935916 (age 10.752s)
hex dump (first 32 bytes):
08 d3 0a 01 00 00 00 00 08 00 00 00 01 00 00 00 ................
d0 f5 0b 92 81 88 ff ff 80 64 64 25 81 88 ff ff .........dd%....
backtrace:
[<ffffffffa0317c83>] kmem_alloc+0x73/0x140 [xfs]
[<ffffffffa03234a9>] xlog_recover_buf_commit_pass1+0x139/0x200 [xfs]
[<ffffffffa032dc27>] xlog_recover_commit_trans+0x307/0x350 [xfs]
[<ffffffffa032df15>] xlog_recovery_process_trans+0xa5/0xe0 [xfs]
[<ffffffffa032e12d>] xlog_recover_process_data+0x8d/0x140 [xfs]
[<ffffffffa032e49d>] xlog_do_recovery_pass+0x19d/0x740 [xfs]
[<ffffffffa032f22d>] xlog_do_log_recovery+0x6d/0x150 [xfs]
[<ffffffffa032f343>] xlog_do_recover+0x33/0x1d0 [xfs]
[<ffffffffa032faba>] xlog_recover+0xda/0x190 [xfs]
[<ffffffffa03194bc>] xfs_log_mount+0x14c/0x360 [xfs]
[<ffffffffa030bfed>] xfs_mountfs+0x50d/0xa60 [xfs]
[<ffffffffa03124b5>] xfs_fs_fill_super+0x6a5/0x950 [xfs]
[<ffffffff812b92a5>] get_tree_bdev+0x175/0x280
[<ffffffff812b7c3a>] vfs_get_tree+0x1a/0x80
[<ffffffff812e366f>] path_mount+0x6ff/0xaa0
[<ffffffff812e3b13>] __x64_sys_mount+0x103/0x140
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Move the code that allocates and frees the buffer cancellation tables
used by log recovery into the file that actually uses the tables. This
is a precursor to some cleanups and a memory leak fix.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- Basic eBPF support (Sergey)
* tag 'arc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: bpf: define uapi for BPF_PROG_TYPE_PERF_EVENT program type
ARC: disasm: handle ARCv2 case in kprobe get/set functions
ARC: implement syscall tracepoints
ARC: enable HAVE_REGS_AND_STACK_ACCESS_API feature
|
|
The recent patch to improve btree cycle checking caused a regression
when I rebased the in-memory btree branch atop the 5.19 for-next branch,
because in-memory short-pointer btrees do not have AG numbers. This
produced the following complaint from kmemleak:
unreferenced object 0xffff88803d47dde8 (size 264):
comm "xfs_io", pid 4889, jiffies 4294906764 (age 24.072s)
hex dump (first 32 bytes):
90 4d 0b 0f 80 88 ff ff 00 a0 bd 05 80 88 ff ff .M..............
e0 44 3a a0 ff ff ff ff 00 df 08 06 80 88 ff ff .D:.............
backtrace:
[<ffffffffa0388059>] xfbtree_dup_cursor+0x49/0xc0 [xfs]
[<ffffffffa029887b>] xfs_btree_dup_cursor+0x3b/0x200 [xfs]
[<ffffffffa029af5d>] __xfs_btree_split+0x6ad/0x820 [xfs]
[<ffffffffa029b130>] xfs_btree_split+0x60/0x110 [xfs]
[<ffffffffa029f6da>] xfs_btree_make_block_unfull+0x19a/0x1f0 [xfs]
[<ffffffffa029fada>] xfs_btree_insrec+0x3aa/0x810 [xfs]
[<ffffffffa029fff3>] xfs_btree_insert+0xb3/0x240 [xfs]
[<ffffffffa02cb729>] xfs_rmap_insert+0x99/0x200 [xfs]
[<ffffffffa02cf142>] xfs_rmap_map_shared+0x192/0x5f0 [xfs]
[<ffffffffa02cf60b>] xfs_rmap_map_raw+0x6b/0x90 [xfs]
[<ffffffffa0384a85>] xrep_rmap_stash+0xd5/0x1d0 [xfs]
[<ffffffffa0384dc0>] xrep_rmap_visit_bmbt+0xa0/0xf0 [xfs]
[<ffffffffa0384fb6>] xrep_rmap_scan_iext+0x56/0xa0 [xfs]
[<ffffffffa03850d8>] xrep_rmap_scan_ifork+0xd8/0x160 [xfs]
[<ffffffffa0385195>] xrep_rmap_scan_inode+0x35/0x80 [xfs]
[<ffffffffa03852ee>] xrep_rmap_find_rmaps+0x10e/0x270 [xfs]
I noticed that xfs_btree_insrec has a bunch of debug code that return
out of the function immediately, without freeing the "new" btree cursor
that can be returned when _make_block_unfull calls xfs_btree_split. Fix
the error return in this function to free the btree cursor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs/434 and xfs/436 have been reporting occasional memory leaks of
xfs_dquot objects. These tests themselves were the messenger, not the
culprit, since they unload the xfs module, which trips the slub
debugging code while tearing down all the xfs slab caches:
=============================================================================
BUG xfs_dquot (Tainted: G W ): Objects remaining in xfs_dquot on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffffea000606de00 objects=30 used=5 fp=0xffff888181b78a78 flags=0x17ff80000010200(slab|head|node=0|zone=2|lastcpupid=0xfff)
CPU: 0 PID: 3953166 Comm: modprobe Tainted: G W 5.18.0-rc6-djwx #rc6 d5824be9e46a2393677bda868f9b154d917ca6a7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Since we don't generally rmmod the xfs module between fstests, this
means that xfs/434 is really just the canary in the coal mine --
something leaked a dquot, but we don't know who. After days of pounding
on fstests with kmemleak enabled, I finally got it to spit this out:
unreferenced object 0xffff8880465654c0 (size 536):
comm "u10:4", pid 88, jiffies 4294935810 (age 29.512s)
hex dump (first 32 bytes):
60 4a 56 46 80 88 ff ff 58 ea e4 5c 80 88 ff ff `JVF....X..\....
00 e0 52 49 80 88 ff ff 01 00 01 00 00 00 00 00 ..RI............
backtrace:
[<ffffffffa0740f6c>] xfs_dquot_alloc+0x2c/0x530 [xfs]
[<ffffffffa07443df>] xfs_qm_dqread+0x6f/0x330 [xfs]
[<ffffffffa07462a2>] xfs_qm_dqget+0x132/0x4e0 [xfs]
[<ffffffffa0756bb0>] xfs_qm_quotacheck_dqadjust+0xa0/0x3e0 [xfs]
[<ffffffffa075724d>] xfs_qm_dqusage_adjust+0x35d/0x4f0 [xfs]
[<ffffffffa06c9068>] xfs_iwalk_ag_recs+0x348/0x5d0 [xfs]
[<ffffffffa06c95d3>] xfs_iwalk_run_callbacks+0x273/0x540 [xfs]
[<ffffffffa06c9e8d>] xfs_iwalk_ag+0x5ed/0x890 [xfs]
[<ffffffffa06ca22f>] xfs_iwalk_ag_work+0xff/0x170 [xfs]
[<ffffffffa06d22c9>] xfs_pwork_work+0x79/0x130 [xfs]
[<ffffffff81170bb2>] process_one_work+0x672/0x1040
[<ffffffff81171b1b>] worker_thread+0x59b/0xec0
[<ffffffff8118711e>] kthread+0x29e/0x340
[<ffffffff810032bf>] ret_from_fork+0x1f/0x30
Now we know that quotacheck is at fault, but even this report was
canaryish -- it was triggered by xfs/494, which doesn't actually mount
any filesystems. (kmemleak can be a little slow to notice leaks, even
with fstests repeatedly whacking it to look for them.) Looking at the
*previous* fstest, however, showed that the test run before xfs/494 was
xfs/117. The tipoff to the problem is in this excerpt from dmesg:
XFS (sda4): Quotacheck needed: Please wait.
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0xdb/0x7b0 [xfs], inode 0x119 dinode
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 49 4e 81 a4 03 02 00 00 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 90 57 54 54 1a 4c 68 ..........WTT.Lh
00000020: 81 f9 7d e1 6d ee 16 00 34 bd 7d e1 6d ee 16 00 ..}.m...4.}.m...
00000030: 34 bd 7d e1 6d ee 16 00 00 00 00 00 00 00 00 00 4.}.m...........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 00 96 80 f3 ab ................
00000060: ff ff ff ff da 57 7b 11 00 00 00 00 00 00 00 03 .....W{.........
00000070: 00 00 00 01 00 00 00 10 00 00 00 00 00 00 00 08 ................
XFS (sda4): Quotacheck: Unsuccessful (Error -117): Disabling quotas.
The dinode verifier decided that the inode was corrupt, which causes
iget to return with EFSCORRUPTED. Since this happened during
quotacheck, it is obvious that the kernel aborted the inode walk on
account of the corruption error and disabled quotas. Unfortunately, we
neglect to purge the dquot cache before doing that, which is how the
dquots leaked.
The problems started 10 years ago in commit b84a3a, when the dquot lists
were converted to a radix tree, but the error handling behavior was not
correctly preserved -- in that commit, if the bulkstat failed and
usrquota was enabled, the bulkstat failure code would be overwritten by
the result of flushing all the dquots to disk. As long as that
succeeds, we'd continue the quota mount as if everything were ok, but
instead we're now operating with a corrupt inode and incorrect quota
usage counts. I didn't notice this bug in 2019 when I wrote commit
ebd126a, which changed quotacheck to skip the dqflush when the scan
doesn't complete due to inode walk failures.
Introduced-by: b84a3a96751f ("xfs: remove the per-filesystem list of dquots")
Fixes: ebd126a651f8 ("xfs: convert quotacheck to use the new iwalk functions")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs/538 on a 1kB block filesystem failed with this assert:
XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_ino.allocated == 0 || xfs_is_shutdown(cur->bc_mp), file: fs/xfs/libxfs/xfs_btree.c, line: 448
The problem was that an allocation failed unexpectedly in
xfs_bmbt_alloc_block() after roughly 150,000 minlen allocation error
injections, resulting in an EFSCORRUPTED error being returned to
xfs_bmapi_write(). The error occurred on extent-to-btree format
conversion allocating the new root block:
RIP: 0010:xfs_bmbt_alloc_block+0x177/0x210
Call Trace:
<TASK>
xfs_btree_new_iroot+0xdf/0x520
xfs_btree_make_block_unfull+0x10d/0x1c0
xfs_btree_insrec+0x364/0x790
xfs_btree_insert+0xaa/0x210
xfs_bmap_add_extent_hole_real+0x1fe/0x9a0
xfs_bmapi_allocate+0x34c/0x420
xfs_bmapi_write+0x53c/0x9c0
xfs_alloc_file_space+0xee/0x320
xfs_file_fallocate+0x36b/0x450
vfs_fallocate+0x148/0x340
__x64_sys_fallocate+0x3c/0x70
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa
Why the allocation failed at this point is unknown, but is likely
that we ran the transaction out of reserved space and filesystem out
of space with bmbt blocks because of all the minlen allocations
being done causing worst case fragmentation of a large allocation.
Regardless of the cause, we've then called xfs_bmapi_finish() which
calls xfs_btree_del_cursor(cur, error) to tear down the cursor.
So we have a failed operation, error != 0, cur->bc_ino.allocated > 0
and the filesystem is still up. The assert fails to take into
account that allocation can fail with an error and the transaction
teardown will shut the filesystem down if necessary. i.e. the
assert needs to check "|| error != 0" as well, because at this point
shutdown is pending because the current transaction is dirty....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Not fatal, the assert is there to catch developer attention. I'm
seeing this occasionally during recoveryloop testing after a
shutdown, and I don't want this to stop an overnight recoveryloop
run as it is currently doing.
Convert the ASSERT to a XFS_IS_CORRUPT() check so it will dump a
corruption report into the log and cause a test failure that way,
but it won't stop the machine dead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
