summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix tty-device error handling at probeJohan Hovold
Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai <tiwai@suse.de> Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix potential use-after-free after failed probeJohan Hovold
Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: console: add dummy __module_getJohan Hovold
Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26ARM: multi_v7_defconfig: Enable shmobile platformsGeert Uytterhoeven
Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-26ath9k_htc: Add new USB IDLeon Nardella
This device is a dongle made by Philips to enhance their TVs with wireless capabilities, but works flawlessly on any upstream kernel, provided that the ath9k_htc module is attached to it. It's correctly recognized by lsusb as "0471:209e Philips (or NXP) PTA01 Wireless Adapter" and the patch has been tested on real hardware. Signed-off-by: Leon Nardella <leon.nardella@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26drm: atmel-hlcdc: remove clock polarity from crtc driverNicolas Ferre
Remove this configuration bit in crtc driver as the rising edge clock is widely used. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-26rtlwifi: Clear ACM_CTRL AC3_VO bit correctlyJes Sorensen
All hw driver components in the rtlwifi driver, except for the rtl8192de component has this bug. They would clear BE bit in the ACM_CTRL register instead of the VO bit when processing the VO queue. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: Fix escan timer causing oops.Hante Meuleman
In some rare circumstances the escan protection timer can expire before the setup completed (due to long timeouts on IOCTL). This patch avoids this situation by setting the timer after the setup completed correctly. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: Dont sleep when ctrl frames to transmit.Hante Meuleman
The SDIO watchdog will put the device in sleep mode when there is no activity for some time and nothing to do anymore. This check is incomplete and should also check if there is a control frame to transmit. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: make sdio suspend wait for threads to freezeArend van Spriel
Borrowed the idea of the PM freezer to make sdio suspend wait for watchdog and DPC thread to freeze at a safe point in their thread routine. The suspend takes 20-25 msec. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: add debugfs file containing revision infoArend van Spriel
Make the revision info visible in debugfs. The new debugfs file is named 'revinfo'. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: Remove error print for invalid key index.Hante Meuleman
When a key is set or cleared with an unsupported key index then brcmfmac will print an error. With most wpa_supplicants this is happening a lot. The error print is confusing and not needed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: use helper function for changing SDIO stateArend van Spriel
Changing the SDIO state of the driver involves changing the bus interface state. Adding a helper function makes sure that knowledge is in one place. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26mwifiex: use alloc_workqueue's format strings capabilities for WQ namesAvinash Patil
alloc_workqueue() has string format formation ability e.g. wqname%ifname will be treated as wqnameifname. Use this and remove string operations while defining strings for workqueue names. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcm80211: drop unreachable else caseNicholas Mc Guire
the if/elseif/else is exhaustive - there is no 4th case given the rssi_ctrl_mask = RADIO_2055_NBRSSI_SEL | RADIO_2055_WBRSSI_G1_SEL | RADIO_2055_WBRSSI_G2_SEL; so this unreachable else case (dead code) can be dropped. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26brcmfmac: use msecs_to_jiffies for time conversionNicholas Mc Guire
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Restart TSF2 timers on wakeupSujith Manoharan
When coming out of WoW sleep, check and restart timers based on TSF2. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Clear additional WoW eventsSujith Manoharan
The events for patterns 8..15 need to be cleared on wakeup. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Handle additional patterns on wakeupSujith Manoharan
Handle the user-configured patterns in the range 8..15 when waking up and update wow_status correctly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Check MCI PowerSave stateSujith Manoharan
The power save state of MCI has to be disabled when enabling WoW sleep, check this properly. ar9003_mci_state() doesn't handle MCI_STATE_GET_WLAN_PS_STATE right now, but this will be done later when proper support for MCI/PS is added. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Add new MCI statesSujith Manoharan
Several new MCI states have to handled, add them to the list. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Set keep awake timerSujith Manoharan
When MCI is enabled and WoW sleep is enabled, make sure that the RTC keep awake timer is set with the required value. This is also required when the AR_WA is programmed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26ath9k: Fix descriptors for keep-alive frameSujith Manoharan
Along with AR9462, AR9565 also has an extra field in the TX descriptor which needs to be zeroed out for the keep alive frame. This makes the earlier REG_WRITE redundant, so it can be removed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26i40e: check pointers before useShannon Nelson
Make sure we don't try to dereference NULL pointers when returning values from the AdminQ calls. Change-ID: Ia6694f2f415d50acf0aba063c863568742799aff Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: catch NVM write semaphore timeout and retryShannon Nelson
In some circumstances, a multi-write transaction takes longer than the default 3 minute timeout on the write semaphore. If the write failed with an EBUSY status, this is likely the problem, so here we try to reacquire the semaphore then retry the write. We only do one retry, then give up. Change-ID: I1c8be60688acc2f39573839579baf601207c4a36 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: stop flow director on shutdownMitch A Williams
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: I1bd9fc7fd8f151fe24cad132ac9adddab923e3af Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: disconnect irqs on shutdownShannon Nelson
Combine the ICR0 shutdown with the standard interrupt shutdown, and add the interrupt clearing to the PCI shutdown path. This prevents the driver from allowing stray interrupts or causing system logs from un-handled interrupts. Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40evf: TCP/IPv6 over Vxlan Tx checksum offload fixAnjali Singhai
We were checking the outer Protocol flags and deciding the flow for inner header. This patch fixes that. This fixes the Tx checksum offload for TCP/IPv6 over vxlan. Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Issue a PF reset if Tx queue disable timeoutParikh, Neerav
As part of DCB reconfiguration flow if the Tx queue disable times out then issue a PF reset to do some level of recovery. Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the Tx ring qset handle when DCB reconfiguresParikh, Neerav
When DCB is reconfigured to single TC the driver did not reset the Tx ring Qset handle to the correct mapping; which caused Tx queue disable timeouts. Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the case where per TC queue count was higher than queues enabledAnjali Singhai
When the driver or hardware gets less interrupt vectors than the actual number of CPU cores, limit the queue count for the priority queue traffic class (TC) queues. This will fix a warning with multiple function mode where systems regularly have more cores than vectors. Also add extra comment for readability. Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: fix race in hang checkJesse Brandeburg
The driver was having some issues with false Tx hang detection. This makes the driver a little more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining hang state. Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix TSO with more than 8 frags per segment issueAnjali Singhai
The hardware has some limitations the driver needs to adhere to, that we found in extended testing. 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events occurs, the hardware will generate an internal error and freeze the Tx queue. This patch linearizes the skb to avoid these situations. Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Don't check for Tx hang when PF downAkeem G Abodunrin
This patch adds check to bail out if device is already down when checking for Tx hang subtask. Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: fix shift precedence issueShannon Nelson
Add parens to make sure the shift and bitwise precedences don't work backwards for us. Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268 Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix memory leak at failure path in i40e_dbg_command_write()Alexey Khoroshilov
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed in i40e_dbg_command_write(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26s390: let the compiler do page clearingChristian Borntraeger
The hardware folks told me that for page clearing "when you exactly know what to do, hand written xc+pfd is usally faster then mvcl for page clearing, as it saves millicode overhead and parameter parsing and checking" as long as you dont need the cache bypassing. Turns out that gcc already does a proper xc,pfd loop. A small test on z196 that does buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0); for ( i = 0; i < bufsize; i+= 256) buff[i] = 0x5; gets 20% faster (touches every cache line of a page) and buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0); for ( i = 0; i < bufsize; i+= 4096) buff[i] = 0x5; is within noise ratio (touches one cache line of a page). As the clear_page is usually called for first memory accesses we can assume that at least one cache line is used afterwards, so this change should be always better. Another benchmark, a make -j 40 of my testsuite in tmpfs with hot caches on a 32cpu system: -- unpatched -- -- patched -- real 0m1.017s real 0m0.994s (~2% faster, but in noise) user 0m5.339s user 0m5.016s (~6% faster) sys 0m0.691s sys 0m0.632s (~8% faster) Let use the same define to memset as the asm-generic variant Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/pci: fix possible information leak in mmio syscallSebastian Ott
Make sure that even in error situations we do not use copy_to_user on uninitialized kernel memory. Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/dcss: array index 'i' is used before limits check.Ameen Ali
Avoid out-of-bounds-read by checking count before indexing. Signed-off-by : Ameen Ali <Ameenali023@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/scm_block: fix off by one during cluster reservationSebastian Ott
We increase the msb_count after we're finished building the request. That way we can always access the current request via scmrq->request[msb_count] . But once the request is started we need to make sure that the array index stays below msb_count. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/jump label: improve and fix sanity checkHeiko Carstens
Fix the output of the jump label sanity check and also print the code pattern that is supposed to be written to the jump label. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/jump label: add missing jump_label_apply_nops() callHeiko Carstens
When modules are loaded we want to transform the compile time generated nops into runtime generated nops. Otherwise the jump label sanity check will detect invalid code when trying to patch code. Fixes this crash: Jump label code mismatch at __rds_conn_create+0x3c/0x720 Found: c0 04 00 00 00 01 Expected: c0 04 00 00 00 00 Kernel panic - not syncing: Corrupted kernel text CPU: 0 PID: 10 Comm: migration/0 Not tainted 3.19.0-01935-g006610f #14 Call Trace: <0000000000113260> show_trace+0xf8/0x158) <000000000011332a> show_stack+0x6a/0xe8 <000000000069fd64> dump_stack+0x7c/0xd8 <0000000000698d54> panic+0xe4/0x288 <00000000006984c6> jump_label_bug.isra.2+0xbe/0xc001 <000000000011200c> __jump_label_transform+0x94/0xc8 Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26OMAPDSS: fix regression with display sysfs filesTomi Valkeinen
omapdss's sysfs directories for displays used to have 'name' file, giving the name for the display. This file was later renamed to 'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like at least xserver-xorg-video-omap3 requires the 'name' file to be present. To fix the regression, this patch creates new kobjects for each display, allowing us to create sysfs directories for the displays. This way we have the whole directory for omapdss, and there will be no sysfs file clashes with the underlying display device's sysfs files. We can thus add the 'name' sysfs file back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NeilBrown <neilb@suse.de>
2015-02-26video: fbdev: fix possible null dereferenceSudip Mukherjee
we were dereferencing edid first and the NULL check was after accessing that. now we are using edid only if we know that it is not NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26video: ARM CLCD: Add missing error check for devm_kzallocKiran Padwal
This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputsThomas Niederprüm
This patch fixes faulty behaviour in a setup where the input clock for the SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must not be configured as output pin. Otherwise the input clock is messed up horribly. This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to inject a reference clock in setups where McBSP is master and not both rx and tx are used. However for this to work it has to be ensured that set_dai_sysclk() is called after set_dai_fmt(). This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject an external reference clock. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26spi: atmel: Fix interrupt setup for PDC transfersTorsten Fleischer
Additionally to the current DMA transfer the PDC allows to set up a next DMA transfer. This is useful for larger SPI transfers. The driver currently waits for ENDRX as end of the transfer. But ENDRX is set when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the next DMA transfer. Thus a subsequent SPI transfer could be started although there is currently a transfer in progress. This can cause invalid accesses to the SPI slave devices and to SPI transfer errors. This issue has been observed on a hardware with a M25P128 SPI NOR flash. So instead of ENDRX we should wait for RXBUFF. This flag is set if there is no more DMA transfer in progress (RCR = RNCR = 0). Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-09-14 09:59:11 +0000