| Age | Commit message (Collapse) | Author |
|---|
|
Moving zero_resv_unavail before memmap_init_zone(), caused a regression on
x86-32.
The cause is that we access struct pages before they are allocated when
CONFIG_FLAT_NODE_MEM_MAP is used.
free_area_init_nodes()
zero_resv_unavail()
mm_zero_struct_page(pfn_to_page(pfn)); <- struct page is not alloced
free_area_init_node()
if CONFIG_FLAT_NODE_MEM_MAP
alloc_node_mem_map()
memblock_virt_alloc_node_nopanic() <- struct page alloced here
On the other hand memblock_virt_alloc_node_nopanic() zeroes all the memory
that it returns, so we do not need to do zero_resv_unavail() here.
Fixes: e181ae0c5db9 ("mm: zero unavailable pages before memmap init")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Matt Hart <matt@mattface.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the server or network is misbehaving and we get an unexpected reply
we can sometimes miss the request not being started and wait on a
request and never get a response, or even double complete the same
request. Fix this by replacing the send_complete completion with just a
per command lock. Add a per command cookie as well so that we can know
if we're getting a double completion for a previous event. Also check
to make sure we dont have REQUEUED set as that means we raced with the
timeout handler and need to just let the retry occur.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can race with the snd timeout and the per-request timeout and end up
requeuing the same request twice. We can't use the send_complete
completion to tell if everything is ok because we hold the tx_lock
during send, so the timeout stuff will block waiting to mark the socket
dead, and we could be marked complete and still requeue. Instead add a
flag to the socket so we know whether we've been requeued yet.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
APM_DO_POP_SEGS does not restore fs/gs which were zeroed by
APM_DO_ZERO_SEGS. Trying to access __preempt_count with
zeroed fs doesn't really work.
Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS
invocations so that fs is actually restored before calling
preempt_enable().
Fixes the following sort of oopses:
[ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP
[ 0.313803] Modules linked in:
[ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19
[ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170
[ 0.316161] EFLAGS: 00210016 CPU: 0
[ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000
[ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0
[ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0
[ 0.316161] Call Trace:
[ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20
[ 0.316161] on_cpu0+0x44/0x70
[ 0.316161] apm+0x54e/0x720
[ 0.316161] ? __switch_to_asm+0x26/0x40
[ 0.316161] ? __schedule+0x17d/0x590
[ 0.316161] kthread+0xc0/0xf0
[ 0.316161] ? proc_apm_show+0x150/0x150
[ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20
[ 0.316161] ret_from_fork+0x2e/0x38
[ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45
[ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0
[ 0.316161] ---[ end trace 656253db2deaa12c ]---
Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com
|
|
pti_set_kernel_image_nonglobal() is only used in pti.c, make it static.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: luto@kernel.org
Cc: hpa@zytor.com
Cc: albcamus@gmail.com
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1531713820-24544-4-git-send-email-jiang.biao2@zte.com.cn
|
|
The MIPS implementation of pci_resource_to_user() introduced in v3.12 by
commit 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci
memory space properly") incorrectly sets *end to the address of the
byte after the resource, rather than the last byte of the resource.
This results in userland seeing resources as a byte larger than they
actually are, for example a 32 byte BAR will be reported by a tool such
as lspci as being 33 bytes in size:
Region 2: I/O ports at 1000 [disabled] [size=33]
Correct this by subtracting one from the calculated end address,
reporting the correct address to userland.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Rui Wang <rui.wang@windriver.com>
Fixes: 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly")
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v3.12+
Patchwork: https://patchwork.linux-mips.org/patch/19829/
|
|
When the CSI is receiving from a bt.656 bus, include a check for
field type 'alternate' when determining whether to set CSI clock
mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
If the second LVDS channel has been disabled in the DT when using dual-channel
mode we should not print a warning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The LVDS signal integrity is only guaranteed when the correct enable
sequence (first IPU DI, then LDB) is used. If the LDB display output was
active before the imx-drm driver is loaded (like when a bootsplash was
active) the DI will be disabled by the full IPU reset we do when loading
the driver. The LDB control registers are not part of the IPU range and
thus will remain unchanged.
This leads to the LDB still being active when the DI is getting enabled,
effectively reversing the required enable sequence. Fix this by also
disabling the LDB on driver bind.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This adds some required quirk when uses headset or headphone on
Panasonic CF-SZ6.
Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Audio mute led does not work on HP ProBook 455 G5,
this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it.
BugLink: https://bugs.launchpad.net/bugs/1781763
Reported-by: James Buren
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A comment in the review of the patch adding the phandle cache said that
the cache would have to be updated when modules are applied and removed.
This patch implements the cache updates.
Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Reported-by: Alan Tull <atull@kernel.org>
Suggested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
drm_legacy_ctxbitmap_next() returns idr_alloc() which can return
-ENOMEM, -EINVAL or -ENOSPC none of which are -1 . but the call sites
of drm_legacy_ctxbitmap_next() seem to be assuming that the error case
would be -1 (original return of drm_ctxbitmap_next() prior to 2.6.23
was actually -1). Thus reenable error handling by checking for < 0.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr")
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1531571532-22733-1-git-send-email-hofrat@osadl.org
|
|
When the oom killer kills a userspace process in the page fault handler
while in guest context, the fault handler fails to release the mm_sem
if the FAULT_FLAG_RETRY_NOWAIT option is set. This leads to a deadlock
when tearing down the mm when the process terminates. This bug can only
happen when pfault is enabled, so only KVM clients are affected.
The problem arises in the rare cases in which handle_mm_fault does not
release the mm_sem. This patch fixes the issue by manually releasing
the mm_sem when needed.
Fixes: 24eb3a824c4f3 ("KVM: s390: Add FAULT_FLAG_RETRY_NOWAIT for guest fault")
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
cmm_set_timer could be called concurrently from cmm_thread, cmm proc
handler, upon cmm smsg receive and timer function itself. To avoid
potential race condition and hitting BUG_ON in add_timer on already
pending timer simply reuse mod_timer which is according to
documentation "the only safe way to modify the timeout" with multiple
unserialized concurrent users. mod_timer can handle both active and
inactive timers which allows to carry out minor code simplification as
well.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Replace strncpy which is used to deliberately avoid string NUL-termination
with memcpy. This allows to get rid of gcc 8 stringop-truncation warning:
inlined from 'query_crypto_facility.constprop' at
drivers/s390/crypto/pkey_api.c:702:2:
./include/linux/string.h:246:9: warning: '__builtin_strncpy' output
truncated before terminating nul copying 8 bytes from a string of the
same length [-Wstringop-truncation]
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
A recent extension to the GIC architecture allows a hypervisor to
arbitrarily reduce the number of LPIs available to a guest, no
matter what the GIC says about the valid range of IntIDs.
Let's factor in this information when computing the number of
available LPIs
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Instead of exposing the GIC distributor IntID field in the rdist
structure that is passed to the ITS, let's replace it with a
copy of the whole GICD_TYPER register. We are going to need
some of this information at a later time.
No functionnal change.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The chunk allocation system is now officially dead, so let's
remove it.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
At the moment, the core ITS driver imposes the allocation to be
in chunks of 32. As we want to relax this on a per bus basis, let's
move the the the allocation constraints to each bus.
No functionnal change.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
As we used to represent the LPI range using a bitmap, we were reducing
the number of LPIs to at most 64k in order to preserve memory.
With our new allocator, there is no such need, as dealing with 2^16
or 2^32 LPIs takes the same amount of memory.
So let's use the number of IntID bits reported by the GIC instead of
an arbitrary limit.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Our current LPI allocator relies on a bitmap, each bit representing
a chunk of 32 LPIs, meaning that each device gets allocated LPIs
in multiple of 32. It served us well so far, but new use cases now
require much more finer grain allocations, down the the individual
LPI.
Given the size of the IntID space (up to 32bit), it isn't practical
to continue using a bitmap, so let's use a different data structure
altogether.
We switch to a list, where each element represent a contiguous range
of LPIs. On allocation, we simply grab the first group big enough to
satisfy the allocation, and substract what we need from it. If the
group becomes empty, we just remove it. On freeing interrupts, we
insert a new group of interrupt in the list, sort it and fuse the
adjacent groups.
This makes freeing interrupt much more expensive than allocating
them (an unusual behaviour), but that's fine as long as we consider
that freeing interrupts is an extremely rare event.
We still allocate interrupts in blocks of 32 for the time being,
but subsequent patches will relax this.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in
Ideapad 330-15AST.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Reported-by: Anant Shende <anantshende@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.18-rc
*) Fix to get xhci working after disable<->enable cycle
*) Fix wrong enum used for status lines (also fixes a compilation
warning).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Looks like the adjusted syntax wasn't fully build tested. This fixes
failures with powerpc builds:
drivers/mmc/host/mxcmmc.c: In function ‘mxcmci_swap_buffers’:
drivers/mmc/host/mxcmmc.c:296:51: error: expected ‘)’ before ‘;’ token
void *buf = kmap_atomic(sg_page(sg) + sg->offset;
^
drivers/mmc/host/mxcmmc.c:299:1: error: expected ‘,’ or ‘;’ before ‘}’ token
}
^
Fixes: b189e7589f6d3 ("mmc: mxcmmc: handle highmem pages")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 1268ed0c474a ("x86/hyper-v: Fix the circular dependency in IPI
enlightenment") pre-filled hv_vp_index with VP_INVAL so it is now
(theoretically) possible to observe hv_cpu_number_to_vp_number()
returning VP_INVAL. We need to check for that in hyperv_flush_tlb_others().
Not checking for VP_INVAL on the first call site where we do
if (hv_cpu_number_to_vp_number(cpumask_last(cpus)) >= 64)
goto do_ex_hypercall;
is OK, in case we're eligible for non-ex hypercall we'll catch the
issue later in for_each_cpu() cycle and in case we'll be doing ex-
hypercall cpumask_to_vpset() will fail.
It would be nice to change hv_cpu_number_to_vp_number() return
value's type to 'u32' but this will likely be a bigger change as
all call sites need to be checked first.
Fixes: 1268ed0c474a ("x86/hyper-v: Fix the circular dependency in IPI enlightenment")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709174012.17429-3-vkuznets@redhat.com
|
|
hyperv_flush_tlb_others_ex()
Commit 1268ed0c474a ("x86/hyper-v: Fix the circular dependency in IPI
enlightenment") made cpumask_to_vpset() return '-1' when there is a CPU
with unknown VP index in the supplied set. This needs to be checked before
we pass 'nr_bank' to hypercall.
Fixes: 1268ed0c474a ("x86/hyper-v: Fix the circular dependency in IPI enlightenment")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709174012.17429-2-vkuznets@redhat.com
|
|
If softsynthx_read() is called with `count < 3`, `count - 3` wraps, causing
the loop to copy as much data as available to the provided buffer. If
softsynthx_read() is invoked through sys_splice(), this causes an
unbounded kernel write; but even when userspace just reads from it
normally, a small size could cause userspace crashes.
Fixes: 425e586cf95b ("speakup: add unicode variant of /dev/softsynth")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'hostif_mib_set_request_bool'
'hostif_mib_set_request_bool' function receives a bool as value and
send the received value with MIB_VALUE_TYPE_BOOL type. There is
one case where the value passed is not a boolean one but
'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int
instead for related multicast enumeration. This changes original
code behaviour but seems to be the right way to do this.
Fixes: 8ce76bff0e6a ("staging: ks7010: add new helpers to achieve mib set request and simplify code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP")
is causing 2 problems for me:
1) One boot the wifi on a laptop with a r8188eu wifi device would not
connect and dmesg contained an oops about scheduling while atomic
pointing to the tkip code. This went away after reverting the commit.
2) I reverted the revert to try and get the oops from 1. again to be able
to add it to this commit message. But now the system did connect to the
wifi only to print a whole bunch of oopses, followed by a hardfreeze a
few seconds later. Subsequent reboots also all lead to scenario 2. Until
I reverted the commit again.
Revert the commit fixes both issues making the laptop usable again.
Fixes: b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently nouveau doesn't actually expose the state debugfs file that's
usually provided for any modesetting driver that supports atomic, even
if nouveau is loaded with atomic=1. This is due to the fact that the
standard debugfs files that DRM creates for atomic drivers is called
when drm_get_pci_dev() is called from nouveau_drm.c. This happens well
before we've initialized the display core, which is currently
responsible for setting the DRIVER_ATOMIC cap.
So, move the atomic option into nouveau_drm.c and just add the
DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This
shouldn't cause any actual issues, as the atomic ioctl will still fail
as expected even if the display core doesn't disable it until later in
the init sequence. This also provides the added benefit of being able to
use the state debugfs file to check the current display state even if
clients aren't allowed to modify it through anything other than the
legacy ioctls.
Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as
this was already disabled there previously.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This both uses the legacy modesetting structures in a racy manner, and
additionally also doesn't even check the right variable (enabled != the
CRTC is actually turned on for atomic).
This fixes issues on my P50 regarding the dedicated GPU not entering
runtime suspend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
A CRTC being enabled doesn't mean it's on! It doesn't even necessarily
mean it's being used. This fixes runtime PM leaks on the P50 I've got
next to me.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When MST and atomic were introduced to nouveau, another structure that
could contain a drm_connector embedded within it was introduced; struct
nv50_mstc. This meant that we no longer would be able to simply loop
through our connector list and assume that nouveau_connector() would
return a proper pointer for each connector, since the assertion that
all connectors coming from nouveau have a full nouveau_connector struct
became invalid.
Unfortunately, none of the actual code that looped through connectors
ever got updated, which means that we've been causing invalid memory
accesses for quite a while now.
An example that was caught by KASAN:
[ 201.038698] ==================================================================
[ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718
[ 201.038800]
[ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1
[ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
[ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau]
[ 201.038887] Call Trace:
[ 201.038894] dump_stack+0xa4/0xfd
[ 201.038900] print_address_description+0x71/0x239
[ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038935] kasan_report.cold.6+0x242/0x2fe
[ 201.038942] __asan_report_load4_noabort+0x19/0x20
[ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau]
[ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau]
[ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau]
[ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau]
[ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau]
[ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau]
[ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau]
[ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau]
[ 201.039264] pci_pm_runtime_resume+0x130/0x250
[ 201.039269] ? pci_restore_standard_config+0x70/0x70
[ 201.039275] __rpm_callback+0x1f2/0x5d0
[ 201.039279] ? rpm_resume+0x560/0x18a0
[ 201.039283] ? pci_restore_standard_config+0x70/0x70
[ 201.039287] ? pci_restore_standard_config+0x70/0x70
[ 201.039291] ? pci_restore_standard_config+0x70/0x70
[ 201.039296] rpm_callback+0x175/0x210
[ 201.039300] ? pci_restore_standard_config+0x70/0x70
[ 201.039305] rpm_resume+0xcc3/0x18a0
[ 201.039312] ? rpm_callback+0x210/0x210
[ 201.039317] ? __pm_runtime_resume+0x9e/0x100
[ 201.039322] ? kasan_check_write+0x14/0x20
[ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0
[ 201.039333] __pm_runtime_resume+0xac/0x100
[ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau]
[ 201.039380] process_one_work+0x7a0/0x14d0
[ 201.039388] ? cancel_delayed_work_sync+0x20/0x20
[ 201.039392] ? lock_acquire+0x113/0x310
[ 201.039398] ? kasan_check_write+0x14/0x20
[ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0
[ 201.039409] worker_thread+0x86/0xb50
[ 201.039418] kthread+0x2e9/0x3a0
[ 201.039422] ? process_one_work+0x14d0/0x14d0
[ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 201.039431] ret_from_fork+0x3a/0x50
[ 201.039441]
[ 201.039444] Allocated by task 79:
[ 201.039449] save_stack+0x43/0xd0
[ 201.039452] kasan_kmalloc+0xc4/0xe0
[ 201.039456] kmem_cache_alloc_trace+0x10a/0x260
[ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau]
[ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper]
[ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper]
[ 201.039529] process_one_work+0x7a0/0x14d0
[ 201.039533] worker_thread+0x86/0xb50
[ 201.039537] kthread+0x2e9/0x3a0
[ 201.039541] ret_from_fork+0x3a/0x50
[ 201.039543]
[ 201.039546] Freed by task 0:
[ 201.039549] (stack is not available)
[ 201.039551]
[ 201.039555] The buggy address belongs to the object at ffff88076738c1a8
which belongs to the cache kmalloc-2048 of size 2048
[ 201.039559] The buggy address is located 1192 bytes inside of
2048-byte region [ffff88076738c1a8, ffff88076738c9a8)
[ 201.039563] The buggy address belongs to the page:
[ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0
[ 201.039573] flags: 0x8000000000008100(slab|head)
[ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0
[ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 201.039585] page dumped because: kasan: bad access detected
[ 201.039588]
[ 201.039591] Memory state around the buggy address:
[ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 201.039604] ^
[ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 201.039613] ==================================================================
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Every codepath in nouveau that loops through the connector list
currently does so using the old method, which is prone to race
conditions from MST connectors being created and destroyed. This has
been causing a multitude of problems, including memory corruption from
trying to access connectors that have already been freed!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The bo array has req->nr_buffers elements so the > should be >= so we
don't read beyond the end of the array.
Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
disables
It was possible for this to be skipped when shutting down MST streams, and
leaving the core channel interlocked with a wndw channel update that never
happens - leading to a hung display.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-By: Lyude Paul <lyude@redhat.com>
|
|
The device (a POS terminal) implements CDC ACM, but has not union
descriptor.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
One regression fix causes imx51 board hang when using ULPI PHY
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
I already pulled the first fix, pull the GVT fixes.
- GVT fix for KBL vGPU hang to update virtual register from LRI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713070922.GA19840@intel.com
|
|
into drm-fixes
Two armada fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713075427.GA16160@rmk-PC.armlinux.org.uk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc5:
- Single fix for a build error when the driver is builtin,
but the backend is a loadable module.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c596cf5-3f24-070e-74f2-c59bfbaf68fa@linux.intel.com
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.18-rc5
This contains a couple of one- or two-line fixes for various minor
issues in the Tegra driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712070142.15571-1-thierry.reding@gmail.com
|
|
into drm-fixes
A few display and GPUVM fixes for 4.18.
A few more fixes for 4.18. Two display fixes and a fix to avoid a segfault if
the GPU does not power up properly on resume. These are on top of my pull
from earlier this week.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712043820.2877-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix hotplug irq ack on i965/g4x (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710213249.GA16479@intel.com
|
|
If the framebuffer address provided by the Graphics Output Protocol
(GOP) is covered by the UEFI memory map, it will tell us which memory
attributes are permitted when mapping this region. In some cases,
(KVM guest on ARM), violating this will result in loss of coherency,
which means that updates sent to the framebuffer by the guest will
not be observeable by the host, and the emulated display simply does
not work.
So if the memory map contains such a description, take the attributes
field into account, and add support for creating WT or WB mappings of
the framebuffer region.
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current implementation of efi_mem_desc_lookup() includes the
following check on the memory descriptor it returns:
if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
md->type != EFI_BOOT_SERVICES_DATA &&
md->type != EFI_RUNTIME_SERVICES_DATA) {
continue;
}
This means that only EfiBootServicesData or EfiRuntimeServicesData
regions are considered, or any other region type provided that it
has the EFI_MEMORY_RUNTIME attribute set.
Given what the name of the function implies, and the fact that any
physical address can be described in the UEFI memory map only a single
time, it does not make sense to impose this condition in the body of the
loop, but instead, should be imposed by the caller depending on the value
that is returned to it.
Two such callers exist at the moment:
- The BGRT code when running on x86, via efi_mem_reserve() and
efi_arch_mem_reserve(). In this case, the region is already known to
be EfiBootServicesData, and so the check is redundant.
- The ESRT handling code which introduced this function, which calls it
both directly from efi_esrt_init() and again via efi_mem_reserve() and
efi_arch_mem_reserve() [on x86].
So let's move this check into the callers instead. This preserves the
current behavior both for BGRT and ESRT handling, and allows the lookup
routine to be reused by other [upcoming] users that don't have this
limitation.
In the ESRT case, keep the entire condition, so that platforms that
deviate from the UEFI spec and use something other than
EfiBootServicesData for the ESRT table will keep working as before.
For x86's efi_arch_mem_reserve() implementation, limit the type to
EfiBootServicesData, since it is the only type the reservation code
expects to operate on in the first place.
While we're at it, drop the __init annotation so that drivers can use it
as well.
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are various ways a platform can provide a device tree binary
to the kernel, with different levels of sophistication:
- ideally, the UEFI firmware, which is tightly coupled with the
platform, provides a device tree image directly as a UEFI
configuration table, and typically permits the contents to be
manipulated either via menu options or via UEFI environment
variables that specify a replacement image,
- GRUB for ARM has a 'devicetree' directive which allows a device
tree image to be loaded from any location accessible to GRUB, and
supersede the one provided by the firmware,
- the EFI stub implements a dtb= command line option that allows a
device tree image to be loaded from a file residing in the same
file system as the one the kernel image was loaded from.
The dtb= command line option was never intended to be more than a
development feature, to allow the other options to be implemented
in parallel. So let's make it an opt-in feature that is disabled
by default, but can be re-enabled at will.
Note that we already disable the dtb= command line option when we
detect that we are running with UEFI Secure Boot enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
7b0a911478c74 ("efi/x86: Move the EFI BGRT init code to early init code")
... removed the implementation and all the references to
efi_late_init() but the function is still declared at
include/linux/efi.h.
Hence, remove the unnecessary declaration.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
get_seconds() is deprecated because of the 32-bit time overflow
in y2038/y2106 on 32-bit architectures. The way it is used in
cper_next_record_id() causes an overflow in 2106 when unsigned UTC
seconds overflow, even on 64-bit architectures.
This starts using ktime_get_real_seconds() to give us more than 32 bits
of timestamp on all architectures, and then changes the algorithm to use
39 bits for the timestamp after the y2038 wrap date, plus an always-1
bit at the top. This gives us another 127 epochs of 136 years, with
strictly monotonically increasing sequence numbers across boots.
This is almost certainly overkill, but seems better than just extending
the deadline from 2038 to 2106.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
