summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-21net: sched: add vxlan option support to act_tunnel_keyXin Long
This patch is to allow setting vxlan options using the act_tunnel_key action. Different from geneve options, only one option can be set. And also, geneve options and vxlan options can't be set at the same time. gbp is the only param for vxlan options: # ip link add name vxlan0 type vxlan dstport 0 external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_proto udp \ action tunnel_key \ set src_ip 10.0.99.192 \ dst_ip 10.0.99.193 \ dst_port 6081 \ id 11 \ vxlan_opts 01020304 \ action mirred egress redirect dev vxlan0 v1->v2: - add .strict_start_type for enc_opts_policy as Jakub noticed. - use Duplicate instead of Wrong in err msg for extack as Jakub suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21octeontx2-af: Fix uninitialized variable in debugfsDan Carpenter
If rvu_get_blkaddr() fails, then this rvu_cgx_nix_cuml_stats() returns zero and we write some uninitialized data into the debugfs output. On the error paths, the use of the uninitialized "*stat" is harmless, but it will lead to a Smatch warning (static analysis) and a UBSan warning (runtime analysis) so we should prevent that as well. Fixes: f967488d095e ("octeontx2-af: Add per CGX port level NIX Rx/Tx counters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21vsock: avoid to assign transport if its initialization failsStefano Garzarella
If transport->init() fails, we can't assign the transport to the socket, because it's not initialized correctly, and any future calls to the transport callbacks would have an unexpected behavior. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reported-and-tested-by: syzbot+e2e5c07bf353b2f79daa@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21mt76: fix fix ampdu lockingMarkus Theil
The current ampdu locking code does not unlock its mutex in the early return case. This patch fixes it. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-21x86/entry/32: Fix NMI vs ESPFIXPeter Zijlstra
When the NMI lands on an ESPFIX_SS, we are on the entry stack and must swizzle, otherwise we'll run do_nmi() on the entry stack, which is BAD. Also, similar to the normal exception path, we need to correct the ESPFIX magic before leaving the entry stack, otherwise pt_regs will present a non-flat stack pointer. Tested by running sigreturn_32 concurrent with perf-record. Fixes: e5862d0515ad ("x86/entry/32: Leave the kernel via trampoline stack") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@kernel.org
2019-11-21x86/entry/32: Unwind the ESPFIX stack earlier on exception entryAndy Lutomirski
Right now, we do some fancy parts of the exception entry path while SS might have a nonzero base: we fill in regs->ss and regs->sp, and we consider switching to the kernel stack. This results in regs->ss and regs->sp referring to a non-flat stack and it may result in overflowing the entry stack. The former issue means that we can try to call iret_exc on a non-flat stack, which doesn't work. Tested with selftests/x86/sigreturn_32. Fixes: 45d7b255747c ("x86/entry/32: Enter the kernel via trampoline stack") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org
2019-11-21x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALLAndy Lutomirski
This will allow us to get percpu access working before FIXUP_FRAME, which will allow us to unwind ESPFIX earlier. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org
2019-11-21x86/entry/32: Use %ss segment where requiredAndy Lutomirski
When re-building the IRET frame we use %eax as an destination %esp, make sure to then also match the segment for when there is a nonzero SS base (ESPFIX). [peterz: Changelog and minor edits] Fixes: 3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org
2019-11-21x86/entry/32: Fix IRET exceptionPeter Zijlstra
As reported by Lai, the commit 3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs") wrecked the IRET EXTABLE entry by making .Lirq_return not point at IRET. Fix this by placing IRET_FRAME in RESTORE_REGS, to mirror how FIXUP_FRAME is part of SAVE_ALL. Fixes: 3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs") Reported-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@kernel.org
2019-11-21x86/cpu_entry_area: Add guard page for entry stack on 32bitThomas Gleixner
The entry stack in the cpu entry area is protected against overflow by the readonly GDT on 64-bit, but on 32-bit the GDT needs to be writeable and therefore does not trigger a fault on stack overflow. Add a guard page. Fixes: c482feefe1ae ("x86/entry/64: Make cpu_entry_area.tss read-only") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org
2019-11-21x86/pti/32: Size initial_page_table correctlyThomas Gleixner
Commit 945fd17ab6ba ("x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table") introduced the sync for the initial page table for 32bit. sync_initial_page_table() uses clone_pgd_range() which does the update for the kernel page table. If PTI is enabled it also updates the user space page table counterpart, which is assumed to be in the next page after the target PGD. At this point in time 32-bit did not have PTI support, so the user space page table update was not taking place. The support for PTI on 32-bit which was introduced later on, did not take that into account and missed to add the user space counter part for the initial page table. As a consequence sync_initial_page_table() overwrites any data which is located in the page behing initial_page_table causing random failures, e.g. by corrupting doublefault_tss and wreckaging the doublefault handler on 32bit. Fix it by adding a "user" page table right after initial_page_table. Fixes: 7757d607c6b3 ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Joerg Roedel <jroedel@suse.de> Cc: stable@kernel.org
2019-11-21x86/doublefault/32: Fix stack canaries in the double fault handlerAndy Lutomirski
The double fault TSS was missing GS setup, which is needed for stack canaries to work. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org
2019-11-21nbd: prevent memory leakNavid Emamdoost
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21Merge branch 'nvme-5.5' of git://git.infradead.org/nvme into ↵Jens Axboe
for-5.5/drivers-post Pull NVMe changes from Keith: "- The only new feature is the optional hwmon support for nvme (Guenter and Akinobu) - A universal work-around for controllers reading discard payloads beyond the range boundary (Eduard) - Chaitanya graciously agreed to share the target driver maintenance" * 'nvme-5.5' of git://git.infradead.org/nvme: nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support
2019-11-21x86/mm/pat: Rename pat_rbtree.c to pat_interval.cDavidlohr Bueso
Considering the previous changes, this is a more proper name. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20191121011601.20611-5-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21x86/mm/pat: Drop the rbt_ prefix from external memtype callsDavidlohr Bueso
Drop the rbt_memtype_*() call rbt_ prefix, as we no longer use an rbtree directly. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20191121011601.20611-4-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functionsDavidlohr Bueso
Get rid of the passing the rb_root down the helper calls; there is only one: &memtype_rbroot. No change in functionality. [ mingo: Fixed the changelog which described a different version of the patch. ] Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20191121011601.20611-3-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21x86/mm/pat: Convert the PAT tree to a generic interval treeDavidlohr Bueso
With some considerations, the custom pat_rbtree implementation can be simplified to use most of the generic interval_tree machinery: - The tree inorder traversal can slightly differ when there are key ('start') collisions in the tree due to one going left and another right. This, however, only affects the output of debugfs' pat_memtype_list file. - Generic interval trees are now fully closed [a, b], for which we need to adjust the last endpoint (ie: end - 1). - Erasing logic must remain untouched as well. - In order for the types to remain u64, the 'memtype_interval' calls are introduced, as opposed to simply using struct interval_tree. In addition, the PAT tree might potentially also benefit by the fast overlap detection for the insertion case when looking up the first overlapping node in the tree. No change in behavior is intended. Finally, I've tested this on various servers, via sanity warnings, running side by side with the current version and so far see no differences in the returned pointer node when doing memtype_rb_lowest_match() lookups. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20191121011601.20611-2-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-22nvme: hwmon: add quirk to avoid changing temperature thresholdAkinobu Mita
This adds a new quirk NVME_QUIRK_NO_TEMP_THRESH_CHANGE to avoid changing the value of the temperature threshold feature for specific devices that show undesirable behavior. Guenter reported: "On my Intel NVME drive (SSDPEKKW512G7), writing any minimum limit on the Composite temperature sensor results in a temperature warning, and that warning is sticky until I reset the controller. It doesn't seem to matter which temperature I write; writing -273000 has the same result." The Intel NVMe has the latest firmware version installed, so this isn't a problem that was ever fixed. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-22nvme: hwmon: provide temperature min and max values for each sensorAkinobu Mita
According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-22nvmet: add another maintainerChristoph Hellwig
Sagi and I have been pretty busy lately, and Chaitanya has been helping a lot with target work and agreed to share the load. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-21Revert "block: split bio if the only bvec's length is > SZ_4K"Jens Axboe
We really don't need this, as the slow path will do the right thing anyway. This reverts commit 6952a7f8446ee85ea9d10ab87b64797a031eaae3. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21block: add iostat counters for flush requestsKonstantin Khlebnikov
Requests that triggers flushing volatile writeback cache to disk (barriers) have significant effect to overall performance. Block layer has sophisticated engine for combining several flush requests into one. But there is no statistics for actual flushes executed by disk. Requests which trigger flushes usually are barriers - zero-size writes. This patch adds two iostat counters into /sys/class/block/$dev/stat and /proc/diskstats - count of completed flush requests and their total time. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21perf tools: Add kernel AUX area sampling definitionsAdrian Hunter
Add kernel AUX area sampling definitions, which brings perf_event.h into line with the kernel version. New sample type PERF_SAMPLE_AUX requests a sample of the AUX area buffer. New perf_event_attr member 'aux_sample_size' specifies the desired size of the sample. Also add support for parsing samples containing AUX area data i.e. PERF_SAMPLE_AUX. Committer notes: I squashed the first two patches in this series to avoid breaking automatic bisection, i.e. after applying only the original first patch in this series we would have: # perf test -v parsing 26: Sample parsing : --- start --- test child forked, pid 17018 sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating test child finished with -1 ---- end ---- Sample parsing: FAILED! # With the two paches combined: # perf test parsing 26: Sample parsing : Ok # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-21KVM: x86: create mmu/ subdirectoryPaolo Bonzini
Preparatory work for shattering mmu.c into multiple files. Besides making it easier to follow, this will also make it possible to write unit tests for various parts. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use ↵Liran Alon
apic-access-page According to Intel SDM section 28.3.3.3/28.3.3.4 Guidelines for Use of the INVVPID/INVEPT Instruction, the hypervisor needs to execute INVVPID/INVEPT X in case CPU executes VMEntry with VPID/EPTP X and either: "Virtualize APIC accesses" VM-execution control was changed from 0 to 1, OR the value of apic_access_page was changed. In the nested case, the burden falls on L1, unless L0 enables EPT in vmcs02 but L1 enables neither EPT nor VPID in vmcs12. For this reason prepare_vmcs02() and load_vmcs12_host_state() have special code to request a TLB flush in case L1 does not use EPT but it uses "virtualize APIC accesses". This special case however is not necessary. On a nested vmentry the physical TLB will already be flushed except if all the following apply: * L0 uses VPID * L1 uses VPID * L0 can guarantee TLB entries populated while running L1 are tagged differently than TLB entries populated while running L2. If the first condition is false, the processor will flush the TLB on vmentry to L2. If the second or third condition are false, prepare_vmcs02() will request KVM_REQ_TLB_FLUSH. However, even if both are true, no extra TLB flush is needed to handle the APIC access page: * if L1 doesn't use VPID, the second condition doesn't hold and the TLB will be flushed anyway. * if L1 uses VPID, it has to flush the TLB itself with INVVPID and section 28.3.3.3 doesn't apply to L0. * even INVEPT is not needed because, if L0 uses EPT, it uses different EPTP when running L2 than L1 (because guest_mode is part of mmu-role). In this case SDM section 28.3.3.4 doesn't apply. Similarly, examining nested_vmx_vmexit()->load_vmcs12_host_state(), one could note that L0 won't flush TLB only in cases where SDM sections 28.3.3.3 and 28.3.3.4 don't apply. In particular, if L0 uses different VPIDs for L1 and L2 (i.e. vmx->vpid != vmx->nested.vpid02), section 28.3.3.3 doesn't apply. Thus, remove this flush from prepare_vmcs02() and nested_vmx_vmexit(). Side-note: This patch can be viewed as removing parts of commit fb6c81984313 ("kvm: vmx: Flush TLB when the APIC-access address changes”) that is not relevant anymore since commit 1313cc2bd8f6 ("kvm: mmu: Add guest_mode to kvm_mmu_page_role”). i.e. The first commit assumes that if L0 use EPT and L1 doesn’t use EPT, then L0 will use same EPTP for both L0 and L1. Which indeed required L0 to execute INVEPT before entering L2 guest. This assumption is not true anymore since when guest_mode was added to mmu-role. Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: x86: remove set but not used variable 'called'Mao Wenan
Fixes gcc '-Wunused-but-set-variable' warning: arch/x86/kvm/x86.c: In function kvm_make_scan_ioapic_request_mask: arch/x86/kvm/x86.c:7911:7: warning: variable called set but not used [-Wunused-but-set-variable] It is not used since commit 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by: Mao Wenan <maowenan@huawei.com> Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinningLiran Alon
vmcs->apic_access_page is simply a token that the hypervisor puts into the PFN of a 4KB EPTE (or PTE if using shadow-paging) that triggers APIC-access VMExit or APIC virtualization logic whenever a CPU running in VMX non-root mode read/write from/to this PFN. As every write either triggers an APIC-access VMExit or write is performed on vmcs->virtual_apic_page, the PFN pointed to by vmcs->apic_access_page should never actually be touched by CPU. Therefore, there is no need to mark vmcs02->apic_access_page as dirty after unpin it on L2->L1 emulated VMExit or when L1 exit VMX operation. Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21Merge branch 'kvm-tsx-ctrl' into HEADPaolo Bonzini
Conflicts: arch/x86/kvm/vmx/vmx.c
2019-11-21KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack itPaolo Bonzini
If X86_FEATURE_RTM is disabled, the guest should not be able to access MSR_IA32_TSX_CTRL. We can therefore use it in KVM to force all transactions from the guest to abort. Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionalityPaolo Bonzini
The current guest mitigation of TAA is both too heavy and not really sufficient. It is too heavy because it will cause some affected CPUs (those that have MDS_NO but lack TAA_NO) to fall back to VERW and get the corresponding slowdown. It is not really sufficient because it will cause the MDS_NO bit to disappear upon microcode update, so that VMs started before the microcode update will not be runnable anymore afterwards, even with tsx=on. Instead, if tsx=on on the host, we can emulate MSR_IA32_TSX_CTRL for the guest and let it run without the VERW mitigation. Even though MSR_IA32_TSX_CTRL is quite heavyweight, and we do not want to write it on every vmentry, we can use the shared MSR functionality because the host kernel need not protect itself from TSX-based side-channels. Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUIDPaolo Bonzini
Because KVM always emulates CPUID, the CPUID clear bit (bit 1) of MSR_IA32_TSX_CTRL must be emulated "manually" by the hypervisor when performing said emulation. Right now neither kvm-intel.ko nor kvm-amd.ko implement MSR_IA32_TSX_CTRL but this will change in the next patch. Reviewed-by: Jim Mattson <jmattson@google.com> Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: x86: do not modify masked bits of shared MSRsPaolo Bonzini
"Shared MSRs" are guest MSRs that are written to the host MSRs but keep their value until the next return to userspace. They support a mask, so that some bits keep the host value, but this mask is only used to skip an unnecessary MSR write and the value written to the MSR is always the guest MSR. Fix this and, while at it, do not update smsr->values[slot].curr if for whatever reason the wrmsr fails. This should only happen due to reserved bits, so the value written to smsr->values[slot].curr will not match when the user-return notifier and the host value will always be restored. However, it is untidy and in rare cases this can actually avoid spurious WRMSRs on return to userspace. Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIESPaolo Bonzini
KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented to the guests. It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR && !RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not hidden (it actually was), yet the value says that TSX is not vulnerable to microarchitectural data sampling. Fix both. Cc: stable@vger.kernel.org Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21Merge tag 'kvmarm-5.5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for Linux 5.5: - Allow non-ISV data aborts to be reported to userspace - Allow injection of data aborts from userspace - Expose stolen time to guests - GICv4 performance improvements - vgic ITS emulation fixes - Simplify FWB handling - Enable halt pool counters - Make the emulated timer PREEMPT_RT compliant Conflicts: include/uapi/linux/kvm.h
2019-11-21drm/i915/fbdev: Restore physical addresses for fb_mmap()Chris Wilson
fbdev uses the physical address of our framebuffer for its fb_mmap() routine. While we need to adapt this address for the new io BAR, we have to fix v5.4 first! The simplest fix is to restore the smem back to v5.3 and we will then probably have to implement our fbops->fb_mmap() callback to handle local memory. Reported-by: Neil MacLeod <freedesktop@nmacleod.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a61dd ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Neil MacLeod <freedesktop@nmacleod.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk (cherry picked from commit abc5520704ab438099fe352636b30b05c1253bea) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 9faf5fa4d3dad3b0c0fa6e67689c144981a11c27) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-21Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetoothMohammad Rasim
This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo) hciconfig output: ``` hci1: Type: Primary Bus: UART BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:5079 acl:0 sco:0 events:567 errors:0 TX bytes:69065 acl:0 sco:0 commands:567 errors:0 Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'alarm' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x161 LMP Version: 4.0 (0x6) Subversion: 0x4106 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-21dt-bindings: net: Add compatible for BCM4335A0 bluetoothMohammad Rasim
Available in the Ampak AP6335 WiFi/Bluetooth combo Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-21rackmeter: Use vtime aware kcpustat accessorFrederic Weisbecker
Now that we have a vtime safe kcpustat accessor, use it to fetch CPUTIME_NICE and fix frozen kcpustat values on nohz_full CPUs. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Link: https://lkml.kernel.org/r/20191121024430.19938-7-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21leds: Use all-in-one vtime aware kcpustat accessorFrederic Weisbecker
We can now safely read user kcpustat fields on nohz_full CPUs. Use the appropriate accessor. [ mingo: Fixed build failure. ] Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> (maintainer:LED SUBSYSTEM) Cc: Pavel Machek <pavel@ucw.cz> (maintainer:LED SUBSYSTEM) Cc: Dan Murphy <dmurphy@ti.com> (reviewer:LED SUBSYSTEM) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Link: https://lkml.kernel.org/r/20191121024430.19938-6-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21pcmcia: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-21pcmcia: clean an indentation issues, remove extraneous spacesColin Ian King
Trivial fix to clean up indentation issues, remove spaces Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-21perf/core: Make the mlock accounting simple againAlexander Shishkin
Commit: d44248a41337 ("perf/core: Rework memory accounting in perf_mmap()") does a lot of things to the mlock accounting arithmetics, while the only thing that actually needed to happen is subtracting the part that is charged to the mm from the part that is charged to the user, so that the former isn't charged twice. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Cc: songliubraving@fb.com Link: https://lkml.kernel.org/r/20191120170640.54123-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21cpufreq: Use vtime aware kcpustat accessors for user timeFrederic Weisbecker
We can now safely read user and guest kcpustat fields on nohz_full CPUs. Use the appropriate accessors. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Link: https://lkml.kernel.org/r/20191121024430.19938-5-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21procfs: Use all-in-one vtime aware kcpustat accessorFrederic Weisbecker
Now that we can read also user and guest time safely under vtime, use the relevant accessor to fix frozen kcpustat values on nohz_full CPUs. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Link: https://lkml.kernel.org/r/20191121024430.19938-4-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21sched/vtime: Bring up complete kcpustat accessorFrederic Weisbecker
Many callsites want to fetch the values of system, user, user_nice, guest or guest_nice kcpustat fields altogether or at least a pair of these. In that case calling kcpustat_field() for each requested field brings unecessary overhead when we could fetch all of them in a row. So provide kcpustat_cpu_fetch() that fetches the whole kcpustat array in a vtime safe way under the same RCU and seqcount block. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191121024430.19938-3-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-21sched/cputime: Support other fields on kcpustat_field()Frederic Weisbecker
Provide support for user, nice, guest and guest_nice fields through kcpustat_field(). Whether we account the delta to a nice or not nice field is decided on top of the nice value snapshot taken at the time we call kcpustat_field(). If the nice value of the task has been changed since the last vtime update, we may have inacurrate distribution of the nice VS unnice cputime. However this is considered as a minor issue compared to the proper fix that would involve interrupting the target on nice updates, which is undesired on nohz_full CPUs. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Link: https://lkml.kernel.org/r/20191121024430.19938-2-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-20net: sfp: soft status and control supportRussell King
Add support for the soft status and control register, which allows TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set. We make use of this when the board does not support GPIOs for these signals. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge branch 'sfp-quirks'David S. Miller
Russell King says: ==================== Add rudimentary SFP module quirk support The SFP module EEPROM describes the capabilities of the module, but doesn't describe the host interface. We have a certain amount of guess-work to work out how to configure the host - which works most of the time. However, there are some (such as GPON) modules which are able to support different host interfaces, such as 1000BASE-X and 2500BASE-X. The module will switch between each mode until it achieves link with the host. There is no defined way to describe this in the SFP EEPROM, so we can only recognise the module and handle it appropriately. This series adds the necessary recognition of the modules using a quirk system, and tweaks the support mask to allow them to link with the host at 2500BASE-X, thereby allowing the user to achieve full line rate. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: sfp: add some quirks for GPON modulesRussell King
Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P modules are capable of 2500base-X, but incorrectly report their capabilities in the EEPROM. It seems rather common that GPON modules mis-report. Let's fix these modules by adding some quirks. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:02:54 +0000