| Age | Commit message (Collapse) | Author |
|---|
|
Now that jump and long displacement ranges are no longer a problem,
remove the limit on JITed image size. In practice it's still limited by
2G, but with verifier allowing "only" 1M instructions, it's not an
issue.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-7-iii@linux.ibm.com
|
|
If literal pool grows past 524287 mark, it's no longer possible to use
long displacement to reference literal pool entries. In JIT setting
maintaining multiple literal pool registers is next to impossible, since
we operate on one instruction at a time.
Therefore, fall back to loading literal pool entry using PC-relative
addressing, and then using a register-register form of the following
machine instruction.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-6-iii@linux.ibm.com
|
|
lg and lgrl have the same performance characteristics, but the former
requires a base register and is subject to long displacement range
limits, while the latter does not. Therefore, lgrl is totally superior
to lg and should be used instead whenever possible.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-5-iii@linux.ibm.com
|
|
Currently literal pool register is loaded using basr, which makes it
point not to the beginning of the literal pool, but rather to the next
instruction. In case JITed code is larger than 512k, this renders
literal pool register absolutely useless due to long displacement range
restrictions.
The solution is to use larl to make literal pool register point to the
very beginning of the literal pool. This makes it always possible to
address 512k worth of literal pool entries using long displacement.
However, for short programs, in which the entire literal pool is covered
by basr-generated base, it is still beneficial to use basr, since it is
4 bytes shorter than larl.
Detect situations when basr-generated base does not cover the entire
literal pool, and in such cases use larl instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-4-iii@linux.ibm.com
|
|
When literal pool size exceeds 512k, it's no longer possible to
reference all the entries in it using a single base register and long
displacement. Therefore, PC-relative lgfrl and lgrl instructions need to
be used.
Unfortunately, they require their arguments to be aligned to 4- and
8-byte boundaries respectively. This generates certain overhead due to
necessary padding bytes. Grouping 4- and 8-byte entries together reduces
the maximum overhead to 6 bytes (2 for aligning 4-byte entries and 4 for
aligning 8-byte entries).
While in theory it is possible to detect whether or not alignment is
needed by comparing the literal pool size with 512k, in practice this
leads to having two ways of emitting constants, making the code more
complicated.
Prefer code simplicity over trivial size saving, and always group and
align literal pool entries.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-3-iii@linux.ibm.com
|
|
Currently maximum JITed code size is limited to 64k, because JIT can
emit only relative short branches, whose range is limited by 64k in both
directions.
Teach JIT to use relative long branches. There are no compare+branch
relative long instructions, so using relative long branches consumes
more space due to having to having to emit an explicit comparison
instruction. Therefore do this only when relative short branch is not
enough.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118180340.68373-2-iii@linux.ibm.com
|
|
The error return path on when bpf_fentry_test* tests fail does not
kfree 'data'. Fix this by adding the missing kfree.
Addresses-Coverity: ("Resource leak")
Fixes: faeb2dce084a ("bpf: Add kernel test functions for fentry testing")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118114059.37287-1-colin.king@canonical.com
|
|
When CONFIG_RESET_CONTROLLER is disabled, the
devm_reset_control_get_exclusive function returns -ENOTSUPP. This is not
handled in subsequent check and then the mdio device fails to probe.
When CONFIG_RESET_CONTROLLER is enabled, its code checks in OF for reset
device, and since it is not present, returns -ENOENT. -ENOENT is handled.
Add -ENOTSUPP also.
This happened to me when upgrading kernel on Turris Omnia. You either
have to enable CONFIG_RESET_CONTROLLER or use this patch.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: 71dd6c0dff51b ("net: phy: add support for reset-controller")
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit eec4844fae7c ("proc/sysctl: add shared variables for range
check") did:
- .extra2 = &two,
+ .extra2 = SYSCTL_ONE,
here, which doesn't seem to be intentional, given the changelog.
This patch restores it to the previous, as the value of 2 still makes
sense (used in fib_multipath_hash()).
Fixes: eec4844fae7c ("proc/sysctl: add shared variables for range check")
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case where the call to phy_interface_is_rgmii returns zero
the variable ret is left uninitialized and this is returned at
the end of the function dp83869_configure_rgmii. Fix this by
returning 0 instead of the uninitialized value in ret.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver forgets to disable the regulator in remove like what is done
in probe failure.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LWTUNNEL_IP_OPT_ERSPAN_VER is u8 type, and nla_put_u8 should have
been used instead of nla_put_u32(). This is a copy-paste error.
Fixes: b0a21810bd5e ("lwtunnel: add options setting and dumping for erspan")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XDP_TX rings should not be limited by max_num_tx_rings_p_up.
To make sure total number of TX rings never exceed MAX_TX_RINGS,
add similar check in mlx4_en_alloc_tx_queue_per_tc(), where
a new value is assigned for num_up.
Fixes: 7e1dc5e926d5 ("net/mlx4_en: Limit the number of TX rings")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
info->options_len is 'u8' type, and when opts_len with a value >
IP_TUNNEL_OPTS_MAX, 'info->options_len = opts_len' will cast int
to u8 and set a wrong value to info->options_len.
Kernel crashed in my test when doing:
# opts="0102:80:00800022"
# for i in {1..99}; do opts="$opts,0102:80:00800022"; done
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 ip_proto udp action tunnel_key \
set src_ip 10.0.99.192 dst_ip 10.0.99.193 \
dst_port 6081 id 11 geneve_opts $opts \
action mirred egress redirect dev geneve0
So we should do the similar check as cls_flower does, return error
when opts_len > IP_TUNNEL_OPTS_MAX in tunnel_key_copy_opts().
Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Updates.
This series has the firmware interface update that changes the aRFS/ntuple
interface on 57500 chips. The 2nd patch adds a counter and improves
the hardware buffer error handling on the 57500 chips. The rest of the
series is mainly enhancements on error recovery and firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is especially beneficial during the NVRAM related firmware
commands that have longer timeouts. If the BNXT_STATE_FW_FATAL_COND
flag gets set while waiting for firmware response, abort and return
error.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During loss of heartbeat, log this warning message.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For NVM params that are not supported in the current NVM
configuration, return the error as -EOPNOTSUPP.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report health status update to devlink health reporter, once
reset is completed.
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Linux driver is capable of being the master function to handle
resets, so we set the flag to let firmware know. Some other
drivers, such as DPDK, is not capable and will not set the flag.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If firmware supports hot reset, extend ETHTOOL_RESET to support
hot reset driver which does not require a driver reload after
ETHTOOL_RESET. The driver will go through the same coordinated
reset sequence as a firmware initiated fatal/non-fatal reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the larger HWRM_COREDUMP_TIMEOUT value for coredump related
data response from the firmware. These commands take longer than
normal commands.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When hardware reports RX buffer errors, the latest 57500 chips do not
require reset. The packet is discarded by the hardware and the
ring will continue to operate.
Also, add an rx_buf_errors counter for this type of error. It can help
the user to identify if the aggregation ring is too small.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The aRFS ring table interface has changed for the 57500 chips. Updating
it accordingly so it will work with the latest production firmware.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
selftests: Add ethtool and scale tests
This patch set adds generic ethtool tests and a mlxsw-specific router
scale test for Spectrum-2.
Patches #1-#2 from Danielle add the router scale test for Spectrum-2. It
re-uses the same test as Spectrum-1, but it is invoked with a different
scale, according to what it is queried from devlink-resource.
Patches #3-#5 from Amit are a re-work of the ethtool tests that were
posted in the past [1]. Patches #3-#4 add the necessary library
routines, whereas patch #5 adds the test itself. The test checks both
good and bad flows with autoneg on and off. The test plan it detailed in
the commit message.
Last time Andrew and Florian (copied) provided very useful feedback that
is incorporated in this set. Namely:
* Parse the value of the different link modes from
/usr/include/linux/ethtool.h
* Differentiate between supported and advertised speeds and use the
latter in autoneg tests
* Make the test generic and move it to net/forwarding/ instead of being
mlxsw-specific
[1] https://patchwork.ozlabs.org/cover/1112903/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check configurations and packets transference with different variations
of autoneg and speed.
Test plan:
1. Test force of same speed with autoneg off
2. Test force of different speeds with autoneg off (should fail)
3. One side is autoneg on and other side sets force of common speeds
4. One side is autoneg on and other side only advertises a subset of the
common speeds (one speed of the subset)
5. One side is autoneg on and other side only advertises a subset of the
common speeds. Check that highest speed is negotiated
6. Test autoneg on, but each side advertises different speeds (should
fail)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function that waits for device with maximum number of iterations.
It enables to limit the waiting and prevent infinite loop.
This will be used by the subsequent patch which will set two ports to
different speeds in order to make sure they cannot negotiate a link.
Waiting for all the setup is limited with 10 minutes for each device.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Functions:
1. speeds_arr_get
The function returns an array of speed values from
/usr/include/linux/ethtool.h The array looks as follows:
[10baseT/Half] = 0,
[10baseT/Full] = 1,
...
2. ethtool_set:
params: cmd
The function runs ethtool by cmd (ethtool -s cmd) and checks if
there was an error in configuration
3. dev_speeds_get:
params: dev, with_mode (0 or 1), adver (0 or 1)
return value: Array of supported/Advertised link modes
with/without mode
* Example 1:
speeds_get swp1 0 0
return: 1000 10000 40000
* Example 2:
speeds_get swp1 1 1
return: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full
4. common_speeds_get:
params: dev1, dev2, with_mode (0 or 1), adver (0 or 1)
return value: Array of common speeds of dev1 and dev2
* Example:
common_speeds_get swp1 swp2 0 0
return: 1000 10000
Assuming that swp1 supports 1000 10000 40000 and swp2 supports
1000 10000
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The scale test for Spectrum-2 should only be invoked for Spectrum-2.
Skip the test otherwise.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same as for Spectrum-1, test the ability to add the maximum number of
routes possible to the switch.
Invoke the test from the 'resource_scale' wrapper script.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
the tunnel is in. However in Linux, a GRE tunnel without a bound device
uses the main VRF as the underlay. Fix the function accordingly.
mlxsw further assumed that moving a tunnel to a different VRF could cause
conflict in local tunnel endpoint address, which cannot be offloaded.
However, the only way that an underlay could be changed by moving the
tunnel device itself is if the tunnel device does not have a bound device.
But in that case the underlay is always the main VRF, so there is no
opportunity to introduce a conflict by moving such device. Thus this check
constitutes a dead code, and can be removed, which do.
Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of errors in unlink_clip_vcc, the logging level is set to
pr_crit but failures in clip_setentry are handled by pr_err().
The patch changes the severity consistent across invocations.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jesper Dangaard says:
====================
page_pool: followup changes to restore tracepoint features
This patchset is a followup to Jonathan patch, that do not release
pool until inflight == 0. That changed page_pool to be responsible for
its own delayed destruction instead of relying on xdp memory model.
As the page_pool maintainer, I'm promoting the use of tracepoint to
troubleshoot and help driver developers verify correctness when
converting at driver to use page_pool. The role of xdp:mem_disconnect
have changed, which broke my bpftrace tools for shutdown verification.
With these changes, the same capabilities are regained.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MM tracepoint for page free (called kmem:mm_page_free) doesn't provide
the page pointer directly, instead it provides the PFN (Page Frame Number).
This is annoying when writing a page_pool leak detector in BPF.
This patch change page_pool tracepoints to also provide the PFN.
The page pointer is still provided to allow other kinds of
troubleshooting from BPF.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When Jonathan change the page_pool to become responsible to its
own shutdown via deferred work queue, then the disconnect_cnt
counter was removed from xdp memory model tracepoint.
This patch change the page_pool_inflight tracepoint name to
page_pool_release, because it reflects the new responsability
better. And it reintroduces a counter that reflect the number of
times page_pool_release have been tried.
The counter is also used by the code, to only empty the alloc
cache once. With a stuck work queue running every second and
counter being 64-bit, it will overrun in approx 584 billion
years. For comparison, Earth lifetime expectancy is 7.5 billion
years, before the Sun will engulf, and destroy, the Earth.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When looking at the details I realised that the memory poison in
__xdp_mem_allocator_rcu_free doesn't make sense. This is because the
SLUB allocator uses the first 16 bytes (on 64 bit), for its freelist,
which overlap with members in struct xdp_mem_allocator, that were
updated. Thus, SLUB already does the "poisoning" for us.
I still believe that poisoning memory make sense in other cases.
Kernel have gained different use-after-free detection mechanism, but
enabling those is associated with a huge overhead. Experience is that
debugging facilities can change the timing so much, that that a race
condition will not be provoked when enabled. Thus, I'm still in favour
of poisoning memory where it makes sense.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently match clause 45 PHYs using any ID read from a MMD marked
as present in the "Devices in package" registers 5 and 6. However,
this is incorrect. 45.2 says:
"The definition of the term package is vendor specific and could be
a chip, module, or other similar entity."
so a package could be more or less than the whole PHY - a PHY could be
made up of several modules instantiated onto a single chip such as the
Marvell 88x3310, or some of the MMDs could be disabled according to
chip configuration, such as the Broadcom 84881.
In the case of Broadcom 84881, the "Devices in package" registers
contain 0xc000009b, meaning that there is a PHYXS present in the
package, but all registers in MMD 4 return 0xffff. This leads to our
matching code incorrectly binding this PHY to one of our generic PHY
drivers.
This patch changes the way we determine whether to attempt to match a
MMD identifier, or use it to request a module - if the identifier is
all-ones, then we skip over it. When reading the identifiers, we
initialise phydev->c45_ids.device_ids to all-ones, only reading the
device ID if the "Devices in package" registers indicates we should.
This avoids the generic drivers incorrectly matching on a PHY ID of
0xffffffff.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
Add support for SFPs behind PHYs
This series adds partial support for SFP cages connected to PHYs,
specifically optical SFPs.
We add core infrastructure to phylib for this, and arrange for
minimal code in the PHY driver - currently, this is code to verify
that the module is one that we can support for Marvell 10G PHYs.
v2: add yaml binding patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for SFP+ cages to the Marvell 10G PHY driver. This is
slightly complicated by the way phylib works in that we need to use
a multi-step process to attach the SFP bus, and we also need to track
the phylink state machine to know when the module's transmit disable
signal should change state.
With appropriate DT changes, this allows the SFP+ canges on the
Macchiatobin platform to be functional.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add core phylib help for supporting SFP sockets on PHYs. This provides
a mechanism to inform the SFP layer about PHY up/down events, and also
unregister the SFP bus when the PHY is going away.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the missing sfp property for ethernet controllers (which
has existed for some time) which is being extended to ethernet PHYs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Wildcard support for the net,iface set from Kristian Evensen.
2) Offload support for matching on the input interface.
3) Simplify matching on vlan header fields.
4) Add nft_payload_rebuild_vlan_hdr() function to rebuild the vlan
header from the vlan sk_buff metadata.
5) Pass extack to nft_flow_cls_offload_setup().
6) Add C-VLAN matching support.
7) Use time64_t in xt_time to fix y2038 overflow, from Arnd Bergmann.
8) Use time_t in nft_meta to fix y2038 overflow, also from Arnd.
9) Add flow_action_entry_next() helper function to flowtable offload
infrastructure.
10) Add IPv6 support to the flowtable offload infrastructure.
11) Support for input interface matching from postrouting,
from Phil Sutter.
12) Missing check for ndo callback in flowtable offload, from wenxu.
13) Remove conntrack parameter from flow_offload_fill_dir(), from wenxu.
14) Do not pass flow_rule object for rule removal, cookie is sufficient
to achieve this.
15) Release flow_rule object in case of error from the offload commit
path.
16) Undo offload ruleset updates if transaction fails.
17) Check for error when binding flowtable callbacks, from wenxu.
18) Always unbind flowtable callbacks when unregistering hooks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After previous patches removing bdev being passed around to set it to
bio, it has become unused in submit_extent_page. So it now has "only" 13
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can now remove the bdev from extent_map. Previous patches made sure
that bio_set_dev is correctly in all places and that we don't need to
grab it from latest_bdev or pass it around inside the extent map.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_set_dev sets a bdev to a bio and is not only setting a pointer bug
also changing some state bits if there was a different bdev set before.
This is one thing that's not needed.
Another thing is that setting a bdev at bio allocation time is too early
and actually does not work with plain redundancy profiles, where each
time we submit a bio to a device, the bdev is set correctly.
In many places the bio bdev is set to latest_bdev that seems to serve as
a stub pointer "just to put something to bio". But we don't have to do
that.
Where do we know which bdev to set:
* for regular IO: submit_stripe_bio that's called by btrfs_map_bio
* repair IO: repair_io_failure, read or write from specific device
* super block write (using buffer_heads but uses raw bdev) and barriers
* scrub: this does not use all regular IO paths as it needs to reach all
copies, verify and fixup eventually, and for that all bdev management
is independent
* raid56: rbio_add_io_page, for the RMW write
* integrity-checker: does it's own low-level block tracking
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is preparatory patch to remove @bdev parameter from
submit_extent_page. It can't be removed completely, because the cgroups
need it for wbc when initializing the bio
wbc_init_bio
bio_associate_blkg_from_css
dereference bdev->bi_disk->queue
The bdev pointer is the same as latest_bdev, thus no functional change.
We can retrieve it from fs_devices that's reachable through several
dereferences. The local variable shadows the parameter, but that's only
temporary.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Trace a magic number as immediate value if the target variable is not
found at some probe points which is based on one probe event.
This feature is good for the case if you trace a source code line with
some local variables, which is compiled into several instructions and
some of the variables are optimized out on some instructions.
Even if so, with this feature, perf probe trace a magic number instead
of such disappeared variables and fold those probes on one event.
E.g. without this patch:
# perf probe -D "pud_page_vaddr pud"
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+23558082 pud=%ax:x64
p:probe/pud_page_vaddr _text+328373 pud=%r8:x64
p:probe/pud_page_vaddr _text+348448 pud=%bx:x64
p:probe/pud_page_vaddr _text+23816818 pud=%bx:x64
With this patch:
# perf probe -D "pud_page_vaddr pud" | head
spurious_kernel_fault is blacklisted function, skip it.
vmalloc_fault is blacklisted function, skip it.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+149051 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+315926 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23807209 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23557365 pud=%ax:x64
p:probe/pud_page_vaddr _text+314097 pud=%di:x64
p:probe/pud_page_vaddr _text+314015 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+313893 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+324083 pud=\deade12d:x64
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476931.24476.6261475888681844285.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
