summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-07kvm/s390: drop unpaired smp_mbMichael S. Tsirkin
smp_mb on vcpu destroy isn't paired with anything, violating pairing rules, and seems to be useless. Drop it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1452010811-25486-1-git-send-email-mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-01-07btrfs: use list_for_each_entry* in backref.cGeliang Tang
Use list_for_each_entry*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: use list_for_each_entry_safe in free-space-cache.cGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: use list_for_each_entry* in check-integrity.cGeliang Tang
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07Btrfs: use linux/sizes.h to represent constantsByongho Lee
We use many constants to represent size and offset value. And to make code readable we use '256 * 1024 * 1024' instead of '268435456' to represent '256MB'. However we can make far more readable with 'SZ_256MB' which is defined in the 'linux/sizes.h'. So this patch replaces 'xxx * 1024 * 1024' kind of expression with single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is not a power of 2. And I haven't touched to '4096' & '8192' because it's more intuitive than 'SZ_4KB' & 'SZ_8KB'. Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: cleanup, remove stray return statementsDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: zero out delayed node upon allocationAlexandru Moise
It's slightly cleaner to zero-out the delayed node upon allocation than to do it by hand in btrfs_init_delayed_node() for a few members Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: pass proper enum type to start_transaction()Alexandru Moise
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: switch __btrfs_fs_incompat return type from int to boolAlexandru Moise
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly returning boolean not int. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: remove unused inode argument from uncompress_inline()Byongho Lee
The inode argument is never used from the beginning, so remove it. Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: don't use slab cache for struct btrfs_delalloc_workDavid Sterba
Although we prefer to use separate caches for various structs, it seems better not to do that for struct btrfs_delalloc_work. Objects of this type are allocated rarely, when transaction commit calls btrfs_start_delalloc_roots, requesting delayed iputs. The objects are temporary (with some IO involved) but still allocated and freed within __start_delalloc_inodes. Memory allocation failure is handled. The slab cache is empty most of the time (observed on several systems), so if we need to allocate a new slab object, the first one has to allocate a full page. In a potential case of low memory conditions this might fail with higher probability compared to using the generic slab caches. Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: drop duplicate prefix from scrub workqueuesDavid Sterba
The helper btrfs_alloc_workqueue will add the "btrfs-" prefix. Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: verbose error when we find an unexpected item in sys_arrayDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: handle invalid num_stripes in sys_arrayDavid Sterba
We can handle the special case of num_stripes == 0 directly inside btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to catch other unhandled cases where we fail to validate external data. A crafted or corrupted image crashes at mount time: BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0 BTRFS info (device loop0): disk space caching is enabled BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()! Kernel panic - not syncing: BUG! CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25 Stack: 637af890 60062489 602aeb2e 604192ba 60387961 00000011 637af8a0 6038a835 637af9c0 6038776b 634ef32b 00000000 Call Trace: [<6001c86d>] show_stack+0xfe/0x15b [<6038a835>] dump_stack+0x2a/0x2c [<6038776b>] panic+0x13e/0x2b3 [<6020f099>] btrfs_read_sys_array+0x25d/0x2ff [<601cfbbe>] open_ctree+0x192d/0x27af [<6019c2c1>] btrfs_mount+0x8f5/0xb9a [<600bc9a7>] mount_fs+0x11/0xf3 [<600d5167>] vfs_kern_mount+0x75/0x11a [<6019bcb0>] btrfs_mount+0x2e4/0xb9a [<600bc9a7>] mount_fs+0x11/0xf3 [<600d5167>] vfs_kern_mount+0x75/0x11a [<600d710b>] do_mount+0xa35/0xbc9 [<600d7557>] SyS_mount+0x95/0xc8 [<6001e884>] handle_syscall+0x6b/0x8e Reported-by: Jiri Slaby <jslaby@suse.com> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> CC: stable@vger.kernel.org # 3.19+ Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: better packing of btrfs_delayed_extent_opDavid Sterba
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now and has 8 unused bytes. Reducing the level type to u8 makes it possible to squeeze it to the padding byte after key. The bitfields were switched to bool as there's space to store the full byte without increasing the whole structure, besides that the generated assembly is smaller. struct btrfs_delayed_extent_op { struct btrfs_disk_key key; /* 0 17 */ u8 level; /* 17 1 */ bool update_key; /* 18 1 */ bool update_flags; /* 19 1 */ bool is_data; /* 20 1 */ /* XXX 3 bytes hole, try to pack */ u64 flags_to_set; /* 24 8 */ /* size: 32, cachelines: 1, members: 6 */ /* sum members: 29, holes: 1, sum holes: 3 */ /* last cacheline: 32 bytes */ }; The final size is 32 bytes which gives +26 object per slab page. text data bss dec hex filename 938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before 938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: put delayed item hook into inodeDavid Sterba
Inodes for delayed iput allocate a trivial helper structure, let's place the list hook directly into the inode and save a kmalloc (killing a __GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode. The inode can be put into the delayed_iputs list more than once and we have to keep the count. This means we can't use the list_splice to process a bunch of inodes because we'd lost track of the count if the inode is put into the delayed iputs again while it's processed. Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: Support convert to -d dup for btrfs-convertZhao Lei
Since we will add support for -d dup for non-mixed filesystem, kernel need to support converting to this raid-type. This patch remove limitation of above case. Tested by following script: (combination of dup conversion with fsck): export TEST_DEV='/dev/vdc' export TEST_DIR='/var/ltf/tester/mnt' do_dup_test() { local m_from="$1" local d_from="$2" local m_to="$3" local d_to="$4" echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to" umount "$TEST_DIR" &>/dev/null ./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1 mount "$TEST_DEV" "$TEST_DIR" || return 1 cp -a /sbin/* "$TEST_DIR" [[ "$m_from" != "$m_to" ]] && { ./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1 } [[ "$d_from" != "$d_to" ]] && { local opt=() [[ "$d_to" == single ]] && opt+=("-f") ./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1 } umount "$TEST_DIR" || return 1 ./btrfsck "$TEST_DEV" || return 1 echo return 0 } test_all() { for m_from in single dup; do for d_from in single dup; do for m_to in single dup; do for d_to in single dup; do do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1 done done done done } test_all Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07Btrfs: igrab inode in writepageJosef Bacik
We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07Btrfs: add missing brelse when superblock checksum failsAnand Jain
Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07xen/gntdev: add ioctl for grant copyDavid Vrabel
Add IOCTL_GNTDEV_GRANT_COPY to allow applications to copy between user space buffers and grant references. This interface is similar to the GNTTABOP_copy hypercall ABI except the local buffers are provided using a virtual address (instead of a GFN and offset). To avoid userspace from having to page align its buffers the driver will use two or more ops if required. If the ioctl returns 0, the application must check the status of each segment with the segments status field. If the ioctl returns a -ve error code (EINVAL or EFAULT), the status of individual ops is undefined. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2016-01-07wcn36xx: split DMA mask register writing.Fengwei Yin
Per comments from Bjorn Andersson <bjorn.andersson@sonymobile.com>, split DMA mask register writing as seperate patch in case we need bi-sect in the furture. Signed-off-by: Fengwei Yin <fengwei.yin@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wcn36xx: handle rx skb allocation failure to avoid system crashFengwei Yin
Lawrence reported that git clone could make system crash on a Qualcomm ARM soc based device (DragonBoard, 1G memory without swap) running 64bit Debian. It's turned out the crash is related with rx skb allocation failure. git could consume more than 600MB anonymous memory. And system is in extremely memory shortage case. But driver didn't handle the rx allocation failure case. This patch doesn't submit skb to upper layer if rx skb allocation fails. Instead, it reuse the old skb for rx DMA again. It's more like drop the packets if system is in memory shortage case. With this change, git clone is OOMed instead of system crash. Reported-by: King, Lawrence <lking@qti.qualcomm.com> Signed-off-by: Fengwei Yin <fengwei.yin@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07ath9k: fix ath9k_hw_nvram_check_version()Dan Carpenter
There is a type bug so it always returns success. Fixes: 6fa658fd5ab2 ('ath9k: Simplify and fix eeprom endianness swapping') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07i2c: dw: Add APM X-Gene ACPI I2C device supportLoc Ho
Enable APM X-Gene ACPI I2C device support by adding the corresponding ACPI ID. The platform ACPI APD corresponding change is required to provide the proper clock frequency input. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07ACPI / APD: Add APM X-Gene ACPI I2C device supportLoc Ho
Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07ACPI / LPSS: change 'does not have' to 'has' in commentAndy Shevchenko
The LPSS DMA device has neither _PS0 nor _PS3 method. Fix the wording in the comment line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07Revert "dmaengine: dw: platform: provide platform data for Intel"Andy Shevchenko
Since we have a work around to prevent a system hangup we don't need to provide a platform data explicitly anymore. This reverts commit 175267b389f781748e2bbb6c737e76b5c9bc4c88. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07dmaengine: dw: return immediately from IRQ when DMA isn't in useAndy Shevchenko
There is no need to bother the hardware when all channels are idle. We have not to get any interrupts. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07dmaengine: dw: platform: power on device on shutdownAndy Shevchenko
We have to call dw_dma_disable() to stop any ongoing transfer. On some platforms we can't do that since DMA device is powered off. Moreover we have no possibility at that point to check if the platform is affected or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() unconditionally. On the other hand we can't use pm_runtime_suspended() because runtime PM framework is not fully used by the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07ACPI / LPSS: override power state for LPSS DMA deviceAndy Shevchenko
This is a third approach to workaround long standing issue with LPSS on BayTrail. First one [1] was reverted since it didn't resolve the issue comprehensively. Second one [2] was rejected by internal review. The LPSS DMA controller does not have neither _PS0 nor _PS3 method. Moreover it can be powered off automatically whenever the last LPSS device goes down. In case of no power any access to the DMA controller will hang the system. The behaviour is reproduced on some HP laptops based on Intel BayTrail [3,4] as well as on ASuS T100TA transformer. Power on the LPSS island through the registers accessible in a specific way. [1] http://www.spinics.net/lists/linux-acpi/msg53963.html [2] https://bugzilla.redhat.com/attachment.cgi?id=1066779&action=diff [3] https://bugzilla.redhat.com/show_bug.cgi?id=1184273 [4] http://www.spinics.net/lists/dmaengine/msg01514.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07ath9k: Enable support for cloned SKBSPawel Kulakowski
Ath9k driver does not modify tx skbs, so SUPPORTS_CLONED_SKBS flag can be set. Enabling this flag significant reduce number of copy operation during TCP Tx. This is especially noticeable on platforms with slower CPU (lower CPU usage brings profits in better TCP Tx troughput results). Tested on MIPS with 560 MHz clock Without CLONED_SKBS flag: TCP Tx 145 Mb/s (iperf result) __copy_user_common consumes 12.9% of CPU (result from perf tool) 0% CPU Idle With CLONED_SKBS flag: TCP Tx 170 Mb/s (iperf result) __copy_user_common consumes 1.8% of CPU (result from perf tool) 12% CPU Idle Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wil6210: support for platform specific crash recoveryLior David
Added a simple interface for platform to perform crash recovery. When firmware crashes, wil driver can notify the platform which can trigger a crash recovery process. During the process the platform can request a ram dump from the wil driver as well as control when firmware recovery will start. This interface allows the platform to implement a more advanced crash recovery, for example to reset dependent subsystems in proper order, or to provide its own notifications during the recovery process. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wil6210: fix kernel OOPS when stopping interface during Rx trafficHamad Kadmany
When network interface is stopping, some resources may be already released by the network stack, and Rx frames cause kernel OOPS (observed one is in netfilter code) Proper solution is to drop packets pending in reorder buffer. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07ath10k: set SM power save disabled to default valuePeter Oh
Use SMPS disabled as default because FW does not indicate any support of SMPS. This change will help STAs out that don’t support SMPS from sticking on 1SS, since they don’t have method to change it back to multiple chains. This change also should not affect power consumption of STAs supporting SMPS, because they are capable to switch the mode to dynamic or static either at the end of frame sequence or by using SMPS action frame. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07kvm: x86: only channel 0 of the i8254 is linked to the HPETPaolo Bonzini
While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by: P J P <pjp@fedoraproject.org> Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-07iommu/dma: Use correct offset in map_sgRobin Murphy
When mapping a non-page-aligned scatterlist entry, we copy the original offset to the output DMA address before aligning it to hand off to iommu_map_sg(), then later adding the IOVA page address portion to get the final mapped address. However, when the IOVA page size is smaller than the CPU page size, it is the offset within the IOVA page we want, not that within the CPU page, which can easily be larger than an IOVA page and thus result in an incorrect final address. Fix the bug by taking only the IOVA-aligned part of the offset as the basis of the DMA address, not the whole thing. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-07drm/etnaviv: fix workaround for GC500Lucas Stach
The hardware description macros define the mask and shifts the wrong way around for the intended use, leading to the condition never being true and the chip revision ending up with the wrong value. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2016-01-07pinctrl: mediatek: Modify pinctrl bindings for mt2701Biao Huang
Signed-off-by: Biao Huang <biao.huang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Mathias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpaDavid Matlack
The comment had the meaning of mmu.gva_to_gpa and nested_mmu.gva_to_gpa swapped. Fix that, and also add some details describing how each translation works. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-07Merge tag 'kvm-arm-for-4.5-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM changes for Linux v4.5 - Complete rewrite of the arm64 world switch in C, hopefully paving the way for more sharing with the 32bit code, better maintainability and easier integration of new features. Also smaller and slightly faster in some cases... - Support for 16bit VM identifiers - Various cleanups
2016-01-07Revert "pinctrl: qcom: make PMIC drivers bool"Stephen Boyd
This reverts commit bda7c4c2b9767ce2af4394754498662d62079af5. These drivers build as modules now that we use platform_irq_count() instead of of_irq_count(). Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()Stephen Boyd
of_irq_count() is not an exported symbol (and it shouldn't be used by platform drivers anyway) so use platform_irq_count() instead. This allows us to make the qcom pinctrl drivers modular again. Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn@kryo.se> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07driver-core: platform: Add platform_irq_count()Stephen Boyd
A recent patch added calls to of_irq_count() in the qcom pinctrl drivers and that caused module build failures because of_irq_count() is not an exported symbol. We shouldn't export of_irq_count() to modules because it's an internal OF API that shouldn't be used by drivers. Platform drivers should use platform device APIs instead. Therefore, add a platform_irq_count() API that mirrors the of_irq_count() API so that platform drivers can stay DT agnostic. Cc: Andy Gross <andy.gross@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07rt2x00pci: Disable memory-write-invalidate when the driver exitsJia-Ju Bai
The driver calls pci_set_mwi to enable memory-write-invalidate when it is initialized, but does not call pci_clear_mwi when it is removed. Many other drivers calls pci_clear_mwi when pci_set_mwi is called, such as r8169, 8139cp and e1000. This patch adds pci_clear_mwi in error handling and removal procedure, which can fix the problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: introduce module parameter to force successful probeArend van Spriel
The module parameter can be used to ensure the probe succeeds thus claiming the device and allowing post-mortem debugging in case of firmware crash. It is only available when select CONFIG_BRCMDBG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Move all module parameters to one placeHante Meuleman
Module parameters are defined in several files. Move them in one place and make them device specific or global. This makes it easier to override device specific settings by external data like platform data in the future. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Fix warn trace on module unload while in ibss modeHante Meuleman
When the driver is being unloaded a situation can occur where the wirelesss core (cfg80211) wants to remove the ibss, but the state of brcmfmac has already been set to down. When an error is returned in that situation then that will result in a stack trace on removal of the wiphy object. This is avoided by returning 0 when device is down on a leave_ibss call. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: obtain feature info using 'cap' firmware commandArend van Spriel
Several features in the driver directly map to a firmware feature listed in response of the 'cap' firmware command. For those features this response will be examined instead of attempting individual firmware commands. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Add support for scheduled scan mac randomizationHante Meuleman
Scheduled scan be requested to use mac randomization. This patch checks the flags and enables the randomization if desired. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Add get_station support for IBSSHante Meuleman
When get_station is requested for IBSS then an error will be printed and no information will be returned. This patch adds IBSS specific get station information function. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-22 04:35:27 +0000