summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-04bnxt_en: Re-structure ring indexing and mapping.Michael Chan
In order to support dedicated or shared completion rings, the ring indexing and mapping are re-structured as below: 1. bp->grp_info[] array index is 1:1 with bp->bnapi[] array index and completion ring index. 2. rx rings 0 to n will be mapped to completion rings 0 to n. 3. If tx and rx rings share completion rings, then tx rings 0 to m will be mapped to completion rings 0 to m. 4. If tx and rx rings use dedicated completion rings, then tx rings 0 to m will be mapped to completion rings n + 1 to n + m. 5. Each tx or rx ring will use the corresponding completion ring index for doorbell mapping and MSIX mapping. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Check for NULL rx or tx ring.Michael Chan
Each bnxt_napi structure may no longer be having both an rx ring and a tx ring. Check for a valid ring before using it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Separate bnxt_{rx|tx}_ring_info structs from bnxt_napi struct.Michael Chan
Currently, an rx and a tx ring are always paired with a completion ring. We want to restructure it so that it is possible to have a dedicated completion ring for tx or rx only. The bnxt hardware uses a completion ring for rx and tx events. The driver has to process the completion ring entries sequentially for the rx and tx events. Using a dedicated completion ring for rx only or tx only has these benefits: 1. A burst of rx packets can cause delay in processing tx events if the completion ring is shared. If tx queue is stopped by BQL, this can cause delay in re-starting the tx queue. 2. A completion ring is sized according to the rx and tx ring size rounded up to the nearest power of 2. When the completion ring is shared, it is sized by adding the rx and tx ring sizes and then rounded to the next power of 2, often with a lot of wasted space. 3. Using dedicated completion ring, we can adjust the tx and rx coalescing parameters independently for rx and tx. The first step is to separate the rx and tx ring structures from the bnxt_napi struct. In this patch, an rx ring and a tx ring will point to the same bnxt_napi struct to share the same completion ring. No change in ring assignment and mapping yet. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Refactor bnxt_dbg_dump_states().Michael Chan
By adding 3 separate functions to dump the different ring states. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05xfs: debug mode log record crc error injectionBrian Foster
XFS now uses CRC verification over a limited section of the log to detect torn writes prior to a crash. This is difficult to test directly due to the timing and hardware requirements to cause a short write. Add a mechanism to inject CRC errors into log records to facilitate testing torn write detection during log recovery. This mechanism is dangerous and can result in filesystem corruption. Thus, it is only available in DEBUG mode for testing/development purposes. Set a non-zero value to the following sysfs entry to enable error injection: /sys/fs/xfs/<dev>/log/log_badcrc_factor Once enabled, XFS intentionally writes an invalid CRC to a log record at some random point in the future based on the provided frequency. The filesystem immediately shuts down once the record has been written to the physical log to prevent metadata writeback (e.g., AIL insertion) once the log write completes. This helps reasonably simulate a torn write to the log as the affected record must be safe to discard. The next mount after the intentional shutdown requires log recovery and should detect and recover from the torn write. Note again that this _will_ result in data loss or worse. For testing and development purposes only! Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-05xfs: detect and trim torn writes during log recoveryBrian Foster
Certain types of storage, such as persistent memory, do not provide sector atomicity for writes. This means that if a crash occurs while XFS is writing log records, only part of those records might make it to the storage. This is problematic because log recovery uses the cycle value packed at the top of each log block to locate the head/tail of the log. This can lead to CRC verification failures during log recovery and an unmountable fs for a filesystem that is otherwise consistent. Update log recovery to incorporate log record CRC verification as part of the head/tail discovery process. Once the head is located via the traditional algorithm, run a CRC-only pass over the records up to the head of the log. If CRC verification fails, assume that the records are torn as a matter of policy and trim the head block back to the start of the first bad record. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-04tracing: Fix setting of start_index in find_next()Qiu Peiyang
When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel panic at t_show. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2 RIP: 0010:[<ffffffff811375b2>] [<ffffffff811375b2>] t_show+0x22/0xe0 RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1 RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0 R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570 FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0 Call Trace: [<ffffffff811dc076>] seq_read+0x2f6/0x3e0 [<ffffffff811b749b>] vfs_read+0x9b/0x160 [<ffffffff811b7f69>] SyS_read+0x49/0xb0 [<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13 ---[ end trace 5bd9eb630614861e ]--- Kernel panic - not syncing: Fatal exception When the first time find_next calls find_next_mod_format, it should iterate the trace_bprintk_fmt_list to find the first print format of the module. However in current code, start_index is smaller than *pos at first, and code will not iterate the list. Latter container_of will get the wrong address with former v, which will cause mod_fmt be a meaningless object and so is the returned mod_fmt->fmt. This patch will fix it by correcting the start_index. After fixed, when the first time calls find_next_mod_format, start_index will be equal to *pos, and code will iterate the trace_bprintk_fmt_list to get the right module printk format, so is the returned mod_fmt->fmt. Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com Cc: stable@vger.kernel.org # 3.12+ Fixes: 102c9323c35a8 "tracing: Add __tracepoint_string() to export string pointers" Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-04tile/jump_label: add jump label support for TILE-GxZhigang Lu
Add the arch-specific code to support jump label for TILE-Gx. This code shares NOP instruction with ftrace, so we move it to a common header file. Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by: Zhigang Lu <zlu@ezchip.com> Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2016-01-04tile: define a macro ktext_writable_addr to get writable kernel text addressZhigang Lu
It is used by kgdb, ftrace, kprobe and jump label, so we factor this out into a helper routine. Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by: Zhigang Lu <zlu@ezchip.com> Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2016-01-04vfio/iommu_type1: make use of info.flagsPierre Morel
The flags entry is there to tell the user that some optional information is available. Since we report the iova_pgsizes signal it to the user by setting the flags to VFIO_IOMMU_INFO_PGSIZES. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-01-04mac802154: constify ieee802154_llsec_ops structureJulia Lawall
The ieee802154_llsec_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-04i2c: designware: Add support for AMD Seattle I2CSuravee Suthikulpanit
Add device HID AMDI0510 to match the I2C controlers on AMD Seattle platform Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-04i2c: imx: Remove unneeded commentsFabio Estevam
These multi-lines comments do not follow the standard kernel coding style. In fact, they are not useful comments, so get rid of them. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-04mtd: fix cmdlinepart parser, early naming for auto-filled MTDBrian Norris
Commit 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set") attempted to provide some default settings for MTDs that (a) assign the parent device and (b) don't provide their own name or owner However, this isn't a perfect drop-in replacement for the boilerplate found in some drivers, because the MTD name is used by partition parsers like cmdlinepart, but the name isn't set until add_mtd_device(), after the parsing is completed. This means cmdlinepart sees a NULL name and therefore will not work properly. Fix this by moving the default name and owner assignment to be first in the MTD registration process. [Note: this does not fix all reported issues, particularly with NAND drivers. Will require an additional fix for drivers/mtd/nand/] Fixes: 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set") Reported-by: Heiko Schocher <hs@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Frans Klaver <fransklaver@gmail.com>
2016-01-04Bluetooth: btmrvl: fix hung task warning dumpChin-Ran Lo
It's been observed that when bluetooth driver fails to activate the firmware, below hung task warning dump is displayed after 120 seconds. [ 36.461022] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2 [ 56.512128] Bluetooth: FW failed to be active in time! [ 56.517264] Bluetooth: Downloading firmware failed! [ 240.252176] INFO: task kworker/3:2:129 blocked for more than 120 seconds. [ 240.258931] Not tainted 3.18.0 #254 [ 240.262972] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.270751] kworker/3:2 D ffffffc000205760 0 129 2 0x00000000 [ 240.277825] Workqueue: events request_firmware_work_func [ 240.283134] Call trace: [ 240.285581] [<ffffffc000205760>] __switch_to+0x80/0x8c [ 240.290693] [<ffffffc00088dae0>] __schedule+0x540/0x7b8 [ 240.295921] [<ffffffc00088ddd0>] schedule+0x78/0x84 [ 240.300764] [<ffffffc0006dfd48>] __mmc_claim_host+0xe8/0x1c8 [ 240.306395] [<ffffffc0006edd6c>] sdio_claim_host+0x74/0x84 [ 240.311840] [<ffffffbffc163d08>] 0xffffffbffc163d08 [ 240.316685] [<ffffffbffc165104>] 0xffffffbffc165104 [ 240.321524] [<ffffffbffc130cf8>] mwifiex_dnld_fw+0x98/0x110 [mwifiex] [ 240.327918] [<ffffffbffc12ee88>] mwifiex_remove_card+0x2c4/0x5fc [mwifiex] [ 240.334741] [<ffffffc000596780>] request_firmware_work_func+0x44/0x80 [ 240.341127] [<ffffffc00023b934>] process_one_work+0x2ec/0x50c [ 240.346831] [<ffffffc00023c6a0>] worker_thread+0x350/0x470 [ 240.352272] [<ffffffc0002419bc>] kthread+0xf0/0xfc [ 240.357019] 2 locks held by kworker/3:2/129: [ 240.361248] #0: ("events"){.+.+.+}, at: [<ffffffc00023b840>] process_one_work+0x1f8/0x50c [ 240.369562] #1: ((&fw_work->work)){+.+.+.}, at: [<ffffffc00023b840>] process_one_work+0x1f8/0x50c [ 240.378589] task PC stack pid father [ 240.384501] kworker/1:1 D ffffffc000205760 0 40 2 0x00000000 [ 240.391524] Workqueue: events mtk_atomic_work [ 240.395884] Call trace: [ 240.398317] [<ffffffc000205760>] __switch_to+0x80/0x8c [ 240.403448] [<ffffffc00027279c>] lock_acquire+0x128/0x164 [ 240.408821] kworker/3:2 D ffffffc000205760 0 129 2 0x00000000 [ 240.415867] Workqueue: events request_firmware_work_func [ 240.421138] Call trace: [ 240.423589] [<ffffffc000205760>] __switch_to+0x80/0x8c [ 240.428688] [<ffffffc00088dae0>] __schedule+0x540/0x7b8 [ 240.433886] [<ffffffc00088ddd0>] schedule+0x78/0x84 [ 240.438732] [<ffffffc0006dfd48>] __mmc_claim_host+0xe8/0x1c8 [ 240.444361] [<ffffffc0006edd6c>] sdio_claim_host+0x74/0x84 [ 240.449801] [<ffffffbffc163d08>] 0xffffffbffc163d08 [ 240.454649] [<ffffffbffc165104>] 0xffffffbffc165104 [ 240.459486] [<ffffffbffc130cf8>] mwifiex_dnld_fw+0x98/0x110 [mwifiex] [ 240.465882] [<ffffffbffc12ee88>] mwifiex_remove_card+0x2c4/0x5fc [mwifiex] [ 240.472705] [<ffffffc000596780>] request_firmware_work_func+0x44/0x80 [ 240.479090] [<ffffffc00023b934>] process_one_work+0x2ec/0x50c [ 240.484794] [<ffffffc00023c6a0>] worker_thread+0x350/0x470 [ 240.490231] [<ffffffc0002419bc>] kthread+0xf0/0xfc This patch adds missing sdio_release_host() call so that wlan driver thread can claim sdio host. Fixes: 4863e4cc31d647e1 ("Bluetooth: btmrvl: release sdio bus after firmware is up") Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-04ASoC: rt5645: Constify ACPI device idsMathias Krause
Constify the ACPI device ID array, no need to have it writable at runtime. Also drop the unused RT5645_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Bard Liao <bardliao@realtek.com> Cc: Oder Chiou <oder_chiou@realtek.com> Cc: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-04Bluetooth: hci_bcm: new ACPI IDsHeikki Krogerus
These are used at least by Acer with BCM43241. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-04Bluetooth: hci_bcm: move all Broadcom ACPI IDs to BCM HCI driverHeikki Krogerus
The IDs should all be for Broadcom BCM43241 module, and hci_bcm is now the proper driver for them. This removes one of two different ways of handling PM with the module. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-04Merge branch 'pnfs_generic'Trond Myklebust
* pnfs_generic: NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid() NFSv4.1/pNFS: Fix a race in initiate_file_draining() NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn() NFS: Relax requirements in nfs_flush_incompatible NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid NFS: Allow multiple commit requests in flight per file NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs NFSv4: List stateid information in the callback tracepoints NFSv4.1/pNFS: Don't return NFS4ERR_DELAY unnecessarily in CB_LAYOUTRECALL NFSv4.1/pNFS: Ensure we enforce RFC5661 Section 12.5.5.2.1 pNFS: If we have to delay the layout callback, mark the layout for return NFSv4.1/pNFS: Add a helper to mark the layout as returned pNFS: Ensure nfs4_layoutget_prepare returns the correct error
2016-01-04NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range argumentsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structuresTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()Trond Myklebust
Make it more obvious what we're returning... Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: Fix a race in initiate_file_draining()Trond Myklebust
Peng Tao points out that the call to pnfs_mark_matching_lsegs_return() could race with pnfs_put_lseg(), in which case the layout segment is cleared, but no layoutreturn will be sent. Fix is to replace the call to pnfs_mark_matching_lsegs_invalid(). Reported-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layoutTrond Myklebust
Fix a bug whereby if all the layout segments could be immediately freed, the call to pnfs_error_mark_layout_for_return() would never result in a layoutreturn. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomodeTrond Myklebust
If pnfs_mark_matching_lsegs_return() needs to mark a layout segment for return, then it must also set the return iomode. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateidsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()Trond Myklebust
A stateid is a structure, pass it as a pointer. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-04drm/radeon: Drop unnecessary unsigned int < 0 checkThierry Reding
Unsigned integers can never be negative, so drop this check. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-04drm/dp/mst: fix in RAD element accessMykola Lysenko
This is needed to receive correct port number from RAD, so MSTB could be found Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: fix in MSTB RAD initializationMykola Lysenko
This fix is needed to support more then two branch displays, so RAD address consist at least of 2 elements Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: always send reply for UP requestMykola Lysenko
We should always send reply for UP request in order to make downstream device clean-up resources appropriately. Issue was that reply for UP request was sent only once. Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04drm/dp/mst: process broadcast messages correctlyMykola Lysenko
In case broadcast message received in UP request, RAD cannot be used to identify message originator. Message should be parsed, originator should be found by GUID from parsed message. Also reply with broadcast in case broadcast message received (for now it is always broadcast) Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-04hwmon: (ibmaem) constify aem_rw_sensor_template and aem_ro_sensor_template ↵Julia Lawall
structures The aem_rw_sensor_template and aem_ro_sensor_template structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-04netfilter: nf_ct_helper: define pr_fmt()Pablo Neira Ayuso
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-01-04netfilter: nf_tables: add forward expression to the netdev familyPablo Neira Ayuso
You can use this to forward packets from ingress to the egress path of the specified interface. This provides a fast path to bounce packets from one interface to another specific destination interface. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-01-04ARM: 8481/2: drivers: psci: replace psci firmware callsJens Wiklander
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC Calling Convention. Removes now the now unused psci-call.S. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-04ARM: 8480/2: arm64: add implementation for arm-smcccJens Wiklander
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-04ARM: 8479/2: add implementation for arm-smcccJens Wiklander
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for architectures that may support arm-smccc. It's the responsibility of the caller to know if the SMC instruction is supported by the platform. Reviewed-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-04ARM: 8478/2: arm/arm64: add arm-smcccJens Wiklander
Adds helpers to do SMC and HVC based on ARM SMC Calling Convention. CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the SMC or HVC instruction. It's the responsibility of the caller to know if the SMC instruction is supported by the platform. This patch doesn't provide an implementation of the declared functions. Later patches will bring in implementations and set CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively. Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-04ftrace/scripts: Fix incorrect use of sprintf in recordmcountColin Ian King
Fix build warning: scripts/recordmcount.c:589:4: warning: format not a string literal and no format arguments [-Wformat-security] sprintf("%s: failed\n", file); Fixes: a50bd43935586 ("ftrace/scripts: Have recordmcount copy the object file") Link: http://lkml.kernel.org/r/1451516801-16951-1-git-send-email-colin.king@canonical.com Cc: Li Bin <huawei.libin@huawei.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-04drm: powerplay: use div64_s64 instead of do_divArnd Bergmann
The newly added code for Fiji creates a correct compiler warning about invalid use of the do_div macro: In file included from powerplay/hwmgr/ppatomctrl.c:31:0: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h: In function 'fDivide': drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h:382:89: warning: comparison of distinct pointer types lacks a cast do_div(longlongX, longlongY); /*Q(32,32) divided by Q(16,16) = Q(16,16) Back to original format */ do_div() divides an unsigned 64-bit number by an unsigned 32-bit number. The code instead wants to divide two signed 64-bit numbers, which is done using the div64_s64 function. Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 770911a3cfbb ("drm/amd/powerplay: add/update headers for Fiji SMU and DPM") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-04[um] mconsole: don't open-code memdup_user_nul()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04[um] hostaudio: don't open-code memdup_user()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04HFS wants 8Kb per-superblock allocation; just use kmalloc()Al Viro
... rather than play with __get_free_pages() (and figuring out the allocation order, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04jfs: microoptimize get_zeroed_page / virt_to_pageAl Viro
get_zeroed_page does alloc_page and returns page_address of the result; subsequent virt_to_page will recover the page, but since the caller needs both page and its page_address() anyway, why bother going through that wrapper at all? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04... and a couple in net/9pAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04md: more open-coded offset_in_page()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04dm-bufio: virt_to_phys() doesn't change remainder modulo PAGE_SIZEAl Viro
... so virt_to_phys(p) & (PAGE_SIZE - 1) is a very odd way to spell offset_in_page(p). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04hpfs: missing endianness annotationAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04drivers/mtd/maps/pcmciamtd.c: __iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-23 19:57:22 +0000