summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-27ARM: DMA coherent allocator: align remapped addressesRussell King
The DMA coherent remap area is used to provide an uncached mapping of memory for coherency with DMA engines. Currently, we look for any free hole which our allocation will fit in with page alignment. However, this can lead to fragmentation of the area, and allows small allocations to cross L1 entry boundaries. This is undesirable as we want to move towards allocating sections of memory. Align allocations according to the size, limiting the alignment between the page and section sizes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: use generic ioremap_page_range()Russell King
We don't need our own implementation of this, use the generic library implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivativeLinus Walleij
Implementation of the ST-Ericsson baudrate extension in the PL011 block. In this modified variant it is possible to change the sampling factor from 16 to 8, and thanks to this we can get higher baudrates while still using the same peripheral clock. Also replace the simple division to determine the baud divisor with DIV_ROUND_CLOSEST() rather than a simple integer division. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivativeLinus Walleij
In the ST-Ericsson version of the PL011 the TX and RX have different control registers. Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6213/1: atomic64_test: add ARM as supported architectureWill Deacon
ARM has support for the atomic64_dec_if_positive operation so ensure that it is tested by the atomic64_test routine. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27Merge branch 'origin' into miscRussell King
2010-07-27ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Versatile: fix section mismatchRussell King
WARNING: vmlinux.o(.text+0xbf38): Section mismatch in reference from the function pci_versatile_scan_bus() to the function .devinit.text:pci_scan_bus_parented() The function pci_versatile_scan_bus() references the function __devinit pci_scan_bus_parented(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Remove unnecessary call to find_limits()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: convert pfn_valid to use LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: Convert arm_memory_present() to use LMB memory informationRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Convert platform reservations to use LMB rather than bootmemRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: initial LMB trialRussell King
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: early_pte_alloc()Russell King
Provide a common function for allocating early PTE tables. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6267/1: mop500: add AB8500 interrupt supportRabin Vincent
Add the platform data to enable AB8500 interrupt support. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26e1000: use netif_<level> instead of netdev_<level>Emil Tantilov
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 675ad47375c76a7c3be4ace9554d92cd55518ced Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26usbnet: use jiffies in schedule_timeout(), not msecsKulikov Vasiliy
usbnet_terminate_urbs() uses schedule_timeout() with argument 3 msecs. schedule_timeout() uses jiffies as argument, so convert msecs to jiffies with msecs_to_jiffies(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ks8842: Support 100Mbps when accessed via timberdaleRichard Röjfors
This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26caif: handle snprintf() returnDan Carpenter
snprintf() returns the number of bytes that would have been written. It can be larger than the size of the buffer. The current code won't overflow, but people cut and paste this stuff so lets do it right and also make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26genetlink: use genl_register_family_with_ops()Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drop_monitor: use genl_register_family_with_ops()Changli Gao
[ Fix unused local variable build warnings. -DaveM ] Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26genetlink: cleanup code according to CodingStyleChangli Gao
If the function is exported, the EXPORT* macro for it should follow immediately after the closing function brace line. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/netlink/genetlink.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ethoc: add devinit/devexit section initializersJonas Bonn
Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: restore EEPROM values of MDICNFG on reset with 82580Nick Nunley
On a reset the MDICNFG.Destination and MDICNFG.COM_MDIO register fields are not restored to the EEPROM default. This patch modifies the reset code to read the EEPROM and restore the default values. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: add support for SGMII-based MDIO PHYsNick Nunley
This patch adds support for external MDIO PHYs, in addition to the standard SFP support for SGMII PHYs over the I2C interface. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26e1000e: Drop a useless statementJean Delvare
err is set again a few lines below. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Do not try to disable hpet if it hasn't been initialized before x86, i8259: Only register sysdev if we have a real 8259 PIC
2010-07-26s2io: fixing DBG_PRINT() macroBreno Leitao
Patch 9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the DBG_PRINT() macro and the if clause was wrongly changed. It means that currently all the DBG_PRINT are being printed, flooding the kernel log buffer with things like: s2io: eth6: Next block at: c0000000b9c90000 s2io: eth6: In Neterion Tx routine Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
2010-07-26Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Set io_map_base for several PCI bridges lacking it MIPS: Alchemy: Define eth platform devices in the correct order MIPS: BCM63xx: Prevent second enet registration on BCM6338 MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. MIPS: N32: Define getdents64. MIPS: MTX-1: Fix PCI on the MeshCube and related boards MIPS: Make init_vdso a subsys_initcall. MIPS: "Fix" useless 'init_vdso successfully' message. MIPS: PowerTV: Move register setup to before reading registers. SOUND: Au1000: Fix section mismatch VIDEO: Au1100fb: Fix section mismatch VIDEO: PMAGB-B: Fix section mismatch VIDEO: PMAG-BA: Fix section mismatch NET: declance: Fix section mismatches VIDEO. gbefb: Fix section mismatches.
2010-07-26drm/i915: make sure we shut off the panel in eDP configsJesse Barnes
Fix error from the last pull request. Making sure we shut the panel off is more correct and saves power. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26xfs simplify and speed up direct I/O completionsChristoph Hellwig
Our current handling of direct I/O completions is rather suboptimal, because we defer it to a workqueue more often than needed, and we perform a much to aggressive flush of the workqueue in case unwritten extent conversions happen. This patch changes the direct I/O reads to not even use a completion handler, as we don't bother to use it at all, and to perform the unwritten extent conversions in caller context for synchronous direct I/O. For a small I/O size direct I/O workload on a consumer grade SSD, such as the untar of a kernel tree inside qemu this patch gives speedups of about 5%. Getting us much closer to the speed of a native block device, or a fully allocated XFS file. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26xfs: move aio completion after unwritten extent conversionChristoph Hellwig
If we write into an unwritten extent using AIO we need to complete the AIO request after the extent conversion has finished. Without that a read could race to see see the extent still unwritten and return zeros. For synchronous I/O we already take care of that by flushing the xfsconvertd workqueue (which might be a bit of overkill). To do that add iocb and result fields to struct xfs_ioend, so that we can call aio_complete from xfs_end_io after the extent conversion has happened. Note that we need a new result field as io_error is used for positive errno values, while the AIO code can return negative error values and positive transfer sizes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26direct-io: move aio_complete into ->end_ioChristoph Hellwig
Filesystems with unwritten extent support must not complete an AIO request until the transaction to convert the extent has been commited. That means the aio_complete calls needs to be moved into the ->end_io callback so that the filesystem can control when to call it exactly. This makes a bit of a mess out of dio_complete and the ->end_io callback prototype even more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26xfs: fix big endian buildDave Chinner
Commit 0fd7275cc42ab734eaa1a2c747e65479bd1e42af ("xfs: fix gcc 4.6 set but not read and unused statement warnings") failed to convert some code inside XFS_NATIVE_HOST (big endian host code only) and hence fails to build on such machines. Fix it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-26drivers/net/qla3xxx.c: Checkpatch cleanupsJoe Perches
Remove typedefs Indentation and spacing Use a temporary for a very long pointer variable More 80 column compatible Convert a switch to if/else if Compile tested only, depends on patch "Update logging message style" (old) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 209 errors, 82 warnings, 3995 lines checked (new) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 2 errors, 0 warnings, 3970 lines checked $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.old 49959 212 13728 63899 f99b drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drivers/net/qla3xxx.c: Update logging message styleJoe Perches
Use pr_<level> Use netdev_<level> Use netif_<level> Remove #define PFX Improve a couple of loops to avoid deep indentation. Compile tested only $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 51603 212 13864 65679 1008f drivers/net/qla3xxx.o.old 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26wireless: Make COMPAT_NETLINK_MESSAGES depend upon WEXT_COREDavid S. Miller
WIRELESS_EXT is not the correct dependency. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26netlink: netlink_recvmsg() fixEric Dumazet
commit 1dacc76d0014 (net/compat/wext: send different messages to compat tasks) introduced a race condition on netlink, in case MSG_PEEK is used. An skb given by skb_recv_datagram() might be shared, we must copy it before any modification, or risk fatal corruption. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: allow creating symlinks from untagged to tagged directories sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories. sysfs: Don't allow the creation of symlinks we can't remove
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: tusb6010: fix compile error with n8x0_defconfig USB: FTDI: Add support for the RT System VX-7 radio programming cable USB: add quirk for Broadcom BT dongle USB: usb-storage: fix initializations of urb fields USB: xhci: Set Mult field in endpoint context correctly. USB: sisusbvga: Fix for USB 3.0 USB: adds Artisman USB dongle to list of quirky devices USB: xhci: Set EP0 dequeue ptr after reset of configured device. USB: Fix USB3.0 Port Speed Downgrade after port reset USB: xHCI: Fix another bug in link TRB activation change. USB: option: Add support for AMOI Skypephone S2 USB: New PIDs for Qualcomm gobi 2000 (qcserial) USB: ftdi_sio: support for Signalyzer tools based on FTDI chips USB: s3c2410_udc: be aware of connected gadget driver USB: Expose vendor-specific ACM channel on Nokia 5230 USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c USB: option: add support for 1da5:4518
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: fix rs485 for atmel_serial on avr32
2010-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: add pipe A force quirks to i915 driver drm/i915: Fix panel fitting regression since 734b4157 drm/i915: fix deadlock in fb teardown drm/i915: don't free non-existent compressed llb on ILK+ agp/intel: Use the correct mask to detect i830 aperture size. drm/i915: disable FBC when more than one pipe is active drm/i915: Use the correct scanout alignment for fbcon. drm/i915: make sure eDP panel is turned on drm/i915: add PANEL_UNLOCK_REGS definition drm/i915: Make G4X-style PLL search more permissive drm/i915: Clear any existing dither mode prior to enabling spatial dithering drm/i915: handle shared framebuffers when flipping drm/i915: Explosion following OOM in do_execbuffer. gpu/drm/i915: Add a blacklist to omit modeset on LID open
2010-07-26rt2x00: Fix regression for rt2500pciIvo van Doorn
Since commit: commit f1aa4c541e98afa8b770a75ccaa8504d0bff44a7 Author: Ivo van Doorn <ivdoorn@gmail.com> Date: Tue Jun 29 21:38:55 2010 +0200 rt2x00: Write the BSSID to register when interface is added mananged mode in rt2500pci was broken, due to intf->bssid containing random data rather then the expected 00:00:00:00:00:00 This is corrected by sending the BSSID to rt2x00lib_config_intf only in AP mode where the bssid is set to a valid value. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: Don't set per-BSS QoS for monitor interfacesSujith
In AP mode, there is no need to notify the driver about QoS changes for the monitor interface that is created. The warning in ieee80211_bss_info_change_notify() would be hit otherwise. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: simplify noisefloor calibration chainmask calculationFelix Fietkau
The noisefloor array index always corresponds to the rx chain number it belongs to (with an offset of 3 for the extension chain). It's much simpler (and actually more correct) to directly use the chainmask to calculate the bitmask for the noisefloor array, instead of using these weird chip revision checks and hardcoded mask values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix a small typo in the noisefloor calibration debug codeFelix Fietkau
In the noisefloor array, the extension channel values start at index 3 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix invalid extension channel noisefloor readings in HT20Felix Fietkau
When the hardware is configured in HT20 mode, noise floor readings for the extension channel often return invalid values, which keep the values in the NF history buffer at the hardware-specific maximum limit. Fix this by discarding the extension channel values when in HT20 mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-18 20:07:39 +0000