summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-17drm/exynos: add additional display mode for hdmiSeung-Woo Kim
1080p@30Hz mode is added to hdmi display mode. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-05-17drm/exynos: enable dvi mode for dvi monitorSeung-Woo Kim
Hdmi monitor and dvi monitor can be distinguished with edid. This patch enables dvi mode if dvi monitor is connected and does not enable audio feature for dvi mode because dvi has no audio feature. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-05-17drm/exynos: fixed wrong pageflip finish event for interlace modeSeung-Woo Kim
Pageflip finish event for interlace mode has bug on checking top field vsync because of comparing between dma address converted by start coordinates and non-converted dma address. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-05-17drm/radeon: make use of radeon_gem_init() consistentAlex Deucher
All radeon_gem_init() does is initialize the gem objects list. radeon_device.c does this explicitly. r600+ calls radeon_gem_init() so the list gets initialized twice. Older asics don't call it at all and rely on the the init in radeon_device.c. Just call radeon_gem_init() in radeon_device.c and remove the explicit calls from all the newer asics. All asics call radeon_gem_fini() in their fini pathes. That could possibly be cleaned up too. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon: eliminate redundant connector_names tableIlija Hadzic
connector_names table is just a repeat of information that already exists in drm_connector_enum_list and the same string can be retrieved using drm_get_connector_name function. Nuke the redundant table and use the proper function to retrieve the connector name. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon: Also reset BCI on SI GPU reset.Michel Dänzer
Without this, e.g. egltri_screen looks scrambled after a GPU reset. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon: don't mess with hot plug detect for eDP or LVDS connector v2Jerome Glisse
It seems imac pannel doesn't like whe we change the hot plug setup and then refuse to work. This help but doesn't fully fix: https://bugzilla.redhat.com/show_bug.cgi?id=726143 v2: fix typo and improve commit message Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: checking the wrong variable in savage_do_init_bci()Dan Carpenter
drm_core_ioremap() initializes ->handle. We already know "dev->agp_buffer_map" is a valid pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Update lpfc to version 8.3.31James Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17gma500: fix build warningDave Airlie
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o /ssd/git/drm-core-next/drivers/gpu/drm/gma500/psb_device.c: In function ‘psb_chip_errata’: /ssd/git/drm-core-next/drivers/gpu/drm/gma500/psb_device.c:360:1: warning: no return statement in function returning non-void [-Wreturn-type] /ssd/git/drm-core-next/drivers/gpu/drm/gma500/psb_device.c: At top level: /ssd/git/drm-core-next/drivers/gpu/drm/gma500/psb_device.c:379:2: warning: initialization from incompatible pointer type [enabled by default] /ssd/git/drm-core-next/drivers/gpu/drm/gma500/psb_device.c:379:2: warning: (near initialization for ‘psb_chip_ops.errata’) [enabled by default] Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Fixed system crash due to not providing SCSI ↵James Smart
error-handling host reset handler Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17Merge branch 'sched/urgent' into sched/coreIngo Molnar
Merge reason: bring together all the pending scheduler bits, for the sched/numa changes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver using the wrong xritag when sending ↵James Smart
an els echo Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17gma500: silence an unused variable warningDan Carpenter
If CONFIG_BACKLIGHT_CLASS_DEVICE is disabled then GCC warns that: drivers/gpu/drm/gma500/opregion.c:154:6: warning: unused variable ‘max’ [-Wunused-variable] Which give me a chance to use the new config_enabled() macro. :) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon: check kmalloc() for failuresDan Carpenter
We can just return -ENOMEM here if the allocation fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Debug helper utility routines for dumping various SLI4 ↵James Smart
queues Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17drm: add CRTC propertiesPaulo Zanoni
The i915 driver needs this for the rotation and overscan compensation properties. Other drivers might need this too. Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add 'count' to struct drm_object_propertiesPaulo Zanoni
This way, we don't need to count every time, so we're a little bit faster and code is a little bit smaller. Change suggested by Ville Syrjälä. Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: make the connector properties code use the object properties codePaulo Zanoni
In the future, we may want to kill the internal functions: - drm_connector_attach_property - drm_connector_property_set_value - drm_connector_property_get_value It seems the IOCTL drm_mode_connector_property_set_ioctl will have to live, but we may change libdrm to not use it anymore, if we want. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add generic ioctls to get/set properties on any objectPaulo Zanoni
Useless for connector properties (since they already have their own ioctls), but useful when we add properties to CRTCs, planes and other objects. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: create struct drm_object_properties and use itPaulo Zanoni
For now, only connectors have it. In the future, all objects that need properties should use it. Since the structure is referenced inside struct drm_mode_object, we will be able to deal with object properties without knowing the real type of the object. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: WARN() when drm_connector_attach_property failsPaulo Zanoni
Also return void instead of int. We have more than 100 callers and no one checks for the return value. If this function fails the property won't be exposed by the get/set ioctls, but we should probably survive. If this starts happening, the solution will be to increase DRM_CONNECTOR_MAX_PROPERTY and recompile the Kernel. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: add drm_property_change_is_validPaulo Zanoni
Move code from drm_mode_connector_property_set_ioctl to a new function, so we can reuse this code when we add crtc properties. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix unsol abts xri lookupJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxxJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Reregister VPI for SLI3 after cable moved to new Saturn portJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix driver crash during back-to-back ramp eventsJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix log message for Mailbox command when no error is ↵James Smart
detected Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Revise FCP LOG for easier Finisar trace correlationJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17gma500: unload fixesAlan Cox
Debugging the lid problem tested various error paths which were found wanting so start fixing them up. There is a ton of improvement work could be done here so that every bit of functionality agrees if its _fini, _uninit, etc, and they agree who is responsible for deciding if the clean up is needed. That can come later. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17gma500: Fix crash on D2700MUD and various other boardsAlan Cox
The recent changes led to the lid timer code being run on various devices. It does no harm on most but isn't needed. It also calls unconditionally into the Poulsbo backlight code which goes bang on Cedartrail. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix build warnings when debugfs is not definedJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix kernel panic when going into to sleep stateJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17drm/kms: driver for virtual cirrus under qemuDave Airlie
This is the initial driver for emulated cirrus GPU found in qemu. This driver only supports the emulated GPU and doesn't attempt to bind to any real cirrus GPUs. This driver is intended to be used with xf86-video-modesetting in userspace. It requires at least version 0.3.0 This follow the same design as ast and mgag200, and is based on work done by Matthew Garrett previously. This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp. i.e. it sucks. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix error message displayed even when not an errorJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix Read Link status dataJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fixed system panic due to midlayer abort and driver ↵James Smart
complete race on SCSI cmd Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17mgag200: initial g200se driver (v2)Dave Airlie
This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)Dave Airlie
This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix unable to create vports on FCoE SLI4 adapterJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix initiator sending flogi after acking flogi from targetJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver not supporting the get controller ↵James Smart
attributes command Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning ↵James Smart
profile change Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver unload leaving a scsi host for a ↵James Smart
vport around Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17virtio_net: invoke softirqs after __napi_scheduleMichael S. Tsirkin
__napi_schedule might raise softirq but nothing causes do_softirq to trigger, so it does not in fact run. As a result, the error message "NOHZ: local_softirq_pending 08" sometimes occurs during boot of a KVM guest when the network service is started and we are oom: ... Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0...NOHZ: local_softirq_pending 08 done. [ OK ] ... Further, receive queue processing might get delayed indefinitely until some interrupt triggers: virtio_net expected napi to be run immediately. One way to cause do_softirq to be executed is by invoking local_bh_enable(). As __napi_schedule is normally called from bh or irq context, this seems to make sense: disable bh before __napi_schedule and enable afterwards. In fact it's a very complicated way of calling do_softirq(), and works since this function is only used when we are not in interrupt context. It's not hot at all, in any ideal scenario. Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Tested-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-17virtio: balloon: let host know of updated balloon size before module removalAmit Shah
When the balloon module is removed, we deflate the balloon, reclaiming all the pages that were given to the host. However, we don't update the config values for the new balloon size, resulting in the host showing outdated balloon values. The size update is done after each leak and fill operation, only the module removal case was left out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-17virtio: console: tell host of open ports after resume from s3/s4Amit Shah
If a port was open before going into one of the sleep states, the port can continue normal operation after restore. However, the host has to be told that the guest side of the connection is open to restore pre-suspend state. This wasn't noticed so far due to a bug in qemu that was fixed recently (which marked the guest-side connection as always open). CC: stable@vger.kernel.org # Only for 3.3 Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-17[SCSI] sg: constify sg_proc_leaf_arrJörn Engel
Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: remove sg_mutexJörn Engel
With the exception of the detached field, sg_mutex no longer adds any locking. detached handling has been broken before and is still broken and this patch does not seem to make things worse than they were to begin with. However, I have observed cases of tasks being blocked for >200s waiting for sg_mutex. So the removal clearly adds value for very little cost. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: completely protect sfdsJörn Engel
sfds is protected by sg_index_lock - except for sg_open(), where it isn't. Change that and add some documentation. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit (git 2.34.1) at 2025-09-22 04:31:26 +0000