summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-12Merge tag 'ux500-gpio-pins-for-3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl ux500 GPIO and pinctrl changes for kernel 3.5 * tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver pinctrl: add sleep state definition pinctrl/nomadik: implement pin configuration pinctrl/nomadik: implement pin multiplexing pinctrl/nomadik: reuse GPIO debug function for pins pinctrl/nomadik: break out single GPIO debug function pinctrl/nomadik: basic Nomadik pinctrl interface pinctrl/nomadik: !CONFIG_OF build error gpio: move the Nomadik GPIO driver to pinctrl Context conflicts resolved in drivers/pinctrl/Kconfig and drivers/pinctrl/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-12Linux 3.4-rc7v3.4-rc7Linus Torvalds
.. and this should hopefully be the last -rc before final 3.4 release.
2012-05-13ARM: dts: enable audio support for imx28-evkShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13ARM: dts: enable i2c device for imx28-evkShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13i2c: mxs: add device tree probe supportShawn Guo
Add device tree probe support for i2c-mxs driver. So far, it's only been tested on imx28. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-13ARM: dts: enable mmc for imx28-evkShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-13ARM: dts: enable mmc for imx23-evkShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13mmc: mxs-mmc: add device tree supportShawn Guo
It adds device tree probe support for mxs-mmc driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-12Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers
2012-05-13mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_hostShawn Guo
Copy wp_gpio from platform_data into struct mxs_mmc_host, so that the use of platform_data can be limited in probe function, which will ease the device tree probe. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_hostShawn Guo
It replaces dma_res with dma_channel in struct mxs_mmc_host, so that the device tree support will be a little easier, since dma channel can not be retrieved from "struct resource *dma_res". Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: use devm_* helper to make cleanup simplerShawn Guo
Use devm_request_and_ioremap and devm_request_irq helpers to clean up the code a little bit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: move header from mach into linux folderShawn Guo
Rename arch/arm/mach-mxs/include/mach/mmc.h to include/linux/mmc/mxs-mmc.h, so that mxs-mmc driver becomes <mach/*> inclusion free. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: get rid of the use of cpu_is_xxxShawn Guo
The register HW_SSP_VERSION is broken for ssp version detection, as the address of the register is different between imx23 and imx28. Let's use platform_device_id to detect the device, so that the use of cpu_is_xxx can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: let ssp_is_old take host as parameterShawn Guo
Let macro ssp_is_old take host as parameter to make the code easy to read. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13mmc: mxs-mmc: use global stmp_device functionalityShawn Guo
Use global stmp_device functionality to reduce mach-dependency. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13ARM: EXYNOS: Support DMA for EXYNOS5250 SoCBoojin Kim
mach-exynos/dma.c is updated to support both exynos4 and exynos5. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13Merge branch 'next/cleanup-plat-s3c24xx' into next/cleanup-plat-s3c24xx-s5pKukjin Kim
2012-05-13ARM: SAMSUNG: merge plat-s5p into plat-samsungKukjin Kim
Since just plat-samsung can support all of Samsung stuff so that there is no more need to keep the plat-s5p for S5P SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'v3.4-samsung-fixes-5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board
2012-05-13ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1Kukjin Kim
It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: EXYNOS: use s5p-timer for UniversalC210 boardMarek Szyprowski
Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki: "[...] urgent fixes for Renesas ARM-based platforms. Four of these commits are fixes of regressions new in 3.4-rc and the last one is necessary for SMP to work on those systems in general." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12sparc32: Pass -mcpu=v7 explicitly to gcc.David S. Miller
We should be agnostic to what gcc happens to be generating by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13Merge branch 'spear/clock' into next/clockArnd Bergmann
Viresh Kumar <viresh.kumar@st.com> writes: This is rebased over a (merge of Mike's/clk-next & SPEAr's DT) + Russell's patch: CLKDEV: provide helpers for common clock framework rebased over them. * spear/clock: SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock Conflicts: drivers/clk/Makefile [Arnd: rebased again without the spear/dt branch] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-13ARM: SAMSUNG: move options for common s5p into plat-samsung/KconfigKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move platform device for s5p uart into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move hr timer for common s5p into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move pm part for common s5p into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move interrupt part for common s5p into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: SAMSUNG: move clock part for common s5p into plat-samsungKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13Merge branch 'next/cleanup-samsung-macro' into next/cleanup-samsungKukjin Kim
2012-05-13ARM: S3C24XX: Use common macro to define resources on mach-qt2410.cTushar Behera
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: S3C24XX: Use common macro to define resources on mach-osiris.cTushar Behera
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'spear/pinctrl' into next/pinctrlArnd Bergmann
* spear/pinctrl: pinctrl: (cosmetic) fix two entries in DocBook comments pinctrl: add more info to error msgs in pin_request CLKDEV: provide helpers for common clock framework pinctrl: add pinctrl-mxs support pinctrl: pinctrl-imx: add imx6q pinctrl driver pinctrl: pinctrl-imx: add imx pinctrl core driver dt: add of_get_child_count helper function pinctrl: support gpio request deferred probing pinctrl: add pinctrl_provide_dummies interface for platforms to use pinctrl: enhance reporting of errors when loading from DT pinctrl: add kerneldoc for pinctrl_ops device tree functions pinctrl: propagate map validation errors pinctrl: fix dangling comment pinctrl: fix signed vs unsigned conditionals inside pinmux_map_to_setting ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get() This just adds more dependencies that are required in order not to break the spear pinctrl support. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12sparc32: Un-btfixup more PTE constants and PTE ops.David S. Miller
pte_{filei,wrprotecti,mkcleani,mkoldi} pte_{mkwrite,mkdirty,mkyoung} Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: Un-btfixup pte_{write,dirty,young}iDavid S. Miller
And we can certainly get rid of the const function attributes, there is no way that's needed any longer and no other arch uses this kind of annotation here. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: drop unused code in process_32Sam Ravnborg
It is commented out using #ifdef 0 / #endif, and has been so for a long time. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: Un-btfixup set_pte, pte_present, mk_pte{_phys,_io}().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12Merge branch 'renesas-kzm9g' into renesas-board-newRafael J. Wysocki
* renesas-kzm9g: ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3 ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support ARM: mach-shmobile: kzm9g: add LCDC support ARM: mach-shmobile: kzm9g: add external USB Host support ARM: mach-shmobile: kzm9g: add SMSC 9221 support ARM: mach-shmobile: kzm9g: add defconfig ARM: mach-shmobile: add KZM-A9-GT board support Conflicts: arch/arm/mach-shmobile/Makefile
2012-05-12ARM: mach-shmobile: kzm9g: enable SMP bootKuninori Morimoto
Update the KZM9G defconfig and the code in platsmp.c to support SMP on the sh73a0 based KZM9G board. Also fix up the earlyprintk setting that was previously incorrect. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: defconfig updateKuninori Morimoto
This patch enable GPIO-KEY/FSI, and remove debug settings, and be cleanuped by c2330e286f68f1c408b4aa6515ba49d57f05beae script Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add PCF8757 gpio-keyKuninori Morimoto
This patch adds extra GPIO via PCF8757 chip, and use it as gpio-key. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add SDHI supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add MMCIF supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: correct screen directionKuninori Morimoto
The correct screen direction of KZM9G board needs PORT226/SC settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: sh73a0.h: add GPIO_NRKuninori Morimoto
GPIO_NR is added in order to clarify end of GPIO array. We can add extra GPIO from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3Kuninori Morimoto
MSEL2CR MSEL18 should be 1 if I2C-3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit (git 2.34.1) at 2025-09-28 12:30:33 +0000