summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-10sh: Add pinmux for sh7264Phil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-09Merge branch 'sfc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
2012-05-10sh: Add RSK2+SH7264 boardPhil Edworthy
The RSK2+SH7264 board uses the sh7264 processor. It is often referred to as just rsk7264. NOR Flash, SDRAM, serial, USB Host and ethernet are working. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add sh7264 devicePhil Edworthy
This is an sh2a device with FPU, video display controller (VDC), 8 serial ports, 3 I2C channels, 2 CAN ports, SD and on-chip USB. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sfc: Implement module EEPROM access for SFE4002 and SFN4112FBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Added support for new ethtool APIs for obtaining module eepromStuart Hodgson
Currently allows for SFP+ eeprom to be returned using the ethtool API. This can be extended in future to handle different eeprom formats and sizes Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> [bwh: Drop redundant validation, comment, whitespace] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10ethtool: Extend the ethtool API to obtain plugin module eeprom dataStuart Hodgson
ETHTOOL_GMODULEINFO returns a new struct ethtool_modinfo that will return the type and size of plug-in module eeprom (such as SFP+) for parsing by userland program. ETHTOOL_GMODULEEEPROM returns the raw eeprom information using the existing ethtool_eeprom structture to return the data Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10ethtool: Split ethtool_get_eeprom() to allow for additional EEPROM accessorsBen Hutchings
We want to support reading module (SFP+, XFP, ...) EEPROMs as well as NIC EEPROMs. They will need a different command number and driver operation, but the structure and arguments will be the same and so we can share most of the code here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: By default refill RX rings as soon as space for a batchDavid Riddoch
Previously we refilled with much larger batches, which caused large latency spikes. We now have many more much much smaller spikes! Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Fill RX rings completely full, rather than to 95% fullDavid Riddoch
There was no runtime control of the fast_fill_limit in any case, so purged that field. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Fix missing cleanup in failure path of efx_pci_probe()Ben Hutchings
We need to clear the private data pointer in the PCI device. Also reorder cleanup in efx_pci_remove() for symmetry. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Do not attempt to flush queues if DMA is disabledStuart Hodgson
efx_nic_fatal_interrupt() disables DMA before scheduling a reset. After this, we need not and *cannot* flush queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-09dsa: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equal by handJoe Perches
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09netfilter: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equal by handJoe Perches
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bluetooth: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09atm: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bridge: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bridge: netfilter: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-098021q: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09802: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09etherdevice.h: Add ether_addr_equalJoe Perches
Add a boolean function to check if 2 ethernet addresses are the same. This is to avoid any confusion about compare_ether_addr returning an unsigned, and not being able to use the compare_ether_addr function for sorting ala memcmp. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mmc: core: Remove dead codePhilippe De Swert
bus_width is passed to the function and when 0 (MMC_BUS_WIDTH_1) will cause the function to return. So in in the second test it definitely is different from 0, and the third test is redundant. Signed-off-by: Philippe De Swert <philippedeswert@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09mmc: card: Avoid null pointer dereferencePhilippe De Swert
After the null check on md the code jumped to cmd_done, which then will dereference md in mmc_blk_put. This patch avoids the possible null pointer dereference in that case. Signed-off-by: Philippe De Swert <philippedeswert@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09spi/ep93xx: clean probe/remove routinesHannu Heikkinen
Use devm_* functions for managing devres resources. Also use local variable irq and remove irq variable from struct ep93xx_spi, as it is needed only in probe routine. Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Hannu Heikkinen <hannuxx@iki.fi> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-09Merge tag 'v3.4-rc6' into spi/nextGrant Likely
Linux 3.4-rc6
2012-05-09arm/dts: omap4-panda: Add LEDs supportBenoit Cousson
Add the debug LEDs nodes for an OMAP4 PandaBoard. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09arm/dts: omap4-sdp: Add LEDs supportBenoit Cousson
Add the debug LEDs nodes for an OMAP4 SDP/Blaze. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09arm/dts: twl4030: Add twl4030-gpio nodeBenoit Cousson
Add the twl-gpio node inside twl4030 definition. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10regulator: wm831x: Register all normal regulatorsMark Brown
Register all normal regulators rather than skipping unconfigured ones now that the core can handle regulators without init data. Skip the boost and isink regulators since they are normally controlled by other drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09ARM: OMAP1: Pass dma request lines in platform data to MMC driverTony Lindgren
Pass dma request lines in platform data to MMC driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: Move omap_mmc_add() to mach-omap1Tony Lindgren
Now that omap2420 is using hwmod for MMC, this code is omap1 only used on omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09printk - fix compilation for CONFIG_PRINTK=nKay Sievers
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb-gadget: Initial merge of target module for UASP + BOTSebastian Andrzej Siewior
This fabric uses the target framework to provide a usb gadget device. This gadget supports the USB Attached SCSI Protocol (UASP) and Bulk Only Transfers (BOT or BBB). BOT is the primary interface, UAS is the alternative interface. It has been tested with dummy_hcd on HS and SS. On SS USB3 are supported. I also took my omap device and tried it there against WindowsXP. UAS implements basic command passing (i.e. read/write requests) and TASK MANAGEMENT functions are missing. I had to add a little of error recovery to BOT because Windows was issuing some strange commands and it does not complain after the gadget responded with CSW.status=1. (nab: Move to drivers/usb/gadget as per Sebastian to address legacy limitations for built-in gadget code) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09sbp-target: Initial merge of firewire/ieee-1394 target mode supportChris Boot
The FireWire SBP-2 Target is a driver for using an IEEE-1394 connection as a SCSI transport. This module uses the SCSI Target framework to expose LUNs to other machines attached to a FireWire bus, in effect acting as a FireWire hard disk similar to FireWire Target Disk mode on many Apple computers. This commit contains the squashed pull from Chris Boot's SBP-2-Target: https://github.com/bootc/Linux-SBP-2-Target.git patch-v3 firewire-sbp-target: Add sbp_base.h header firewire-sbp-target: Add sbp_configfs.c firewire-sbp-target: Add sbp_fabric.{c,h} firewire-sbp-target: Add sbp_management_agent.{c,h} firewire-sbp-target: Add sbp_login.{c,h} firewire-sbp-target: Add sbp_target_agent.{c,h} firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} firewire-sbp-target: Add to target Kconfig and Makefile Also add bootc's entry to the MAINTAINERS file. Great work Chris !! Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Andy Grover <agrover@redhat.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Move fw_card kref functions into linux/firewire.hChris Boot
When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Add function to get speed from opaque struct fw_requestChris Boot
Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09usb:hsotg:samsung:cosmetic Move <linux/platform_data/s3c-hsotg.h> to proper ↵Lukasz Majewski
place This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: add a reset function to fix race conditionNicolas Ferre
A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Christian Eggers <christian.eggers@kathrein.de> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: use resource_size() for memory/io resource lengthNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09ARM: OMAP: USB: fix warning on EHCI PHY reset pathIgor Grinberg
When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09misc: MAX8997: Remove max8997-muic driverChanwoo Choi
This patch remove old max8997-muic drvier because of newly Extcon framework. Extcon framework manages the external connector, so add extcon-max8997 driver by using Extcon interface to support MUIC feature of Maxim 8997 PMIC instead of max8997-muic driver(drivers/misc/max8997-muic.c). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09Extcon: add MAX8997 extcon driverChanwoo Choi
This patch add extcon-max8997 driver to support the muic feature of Maxim max8997 by using Extcon framework. The extcon-max8997 driver is implemented based on 'drivers/misc/ max8997-muic.c' and then use Extcon interface instead of callback function in struct max8997_muic_platform_data to notify cable state of notifee which want to know always newly cable state when external connector(e.g., USB, TA, JIG) is attached or detached. v1 - Use Extcon interface to notify cable state of notifee instead of callback function when external connector is attached or detached. - Bug fix of getting platform_data for irq_base value. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial8250-em: Add DT supportMagnus Damm
Update the 8250_em driver to support DT. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial8250-em: clk_get() IS_ERR() error handling fixMagnus Damm
Update the 8250_em driver to correctly handle the case where no clock is associated with the device. The return value of clk_get() needs to be checked with IS_ERR() to avoid NULL pointer referencing. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09target: Remove max_sectors device attribute for modern se_task less codeNicholas Bellinger
This patch removes the original usage of dev_attr->max_sectors in favor of dev_attr->hw_max_sectors that is now being enforced by target core from within transport_generic_cmd_sequencer() for SCF_SCSI_DATA_SG_IO_CDB ops. After the recent se_task removal patches from hch, this value for IBLOCK backends being set via configfs by userspace from an saved max_sectors value that is turning out to be problematic, so it makes sense to go ahead and remove this now legacy attribute all-together. This patch also continues to make se_dev_set_default_attribs() do (sectors / block_size) alignment for what actually get used by target_core_mod to be safe here, following the same alignment currently used by fabric_max_sectors. Reported-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09Merge git://1984.lsi.us.es/net-nextDavid S. Miller
generated by cgit (git 2.34.1) at 2025-10-03 09:43:42 +0000