summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-16wifi: rtw89: Fix a typo in debug messageMasanari Iida
This patch fixes a spelling typo in debug message. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221223102058.162179-1-standby24x7@gmail.com
2023-01-16virtio/vsock: replace virtio_vsock_pkt with sk_buffBobby Eshleman
This commit changes virtio/vsock to use sk_buff instead of virtio_vsock_pkt. Beyond better conforming to other net code, using sk_buff allows vsock to use sk_buff-dependent features in the future (such as sockmap) and improves throughput. This patch introduces the following performance changes: Tool: Uperf Env: Phys Host + L1 Guest Payload: 64k Threads: 16 Test Runs: 10 Type: SOCK_STREAM Before: commit b7bfaa761d760 ("Linux 6.2-rc3") Before ------ g2h: 16.77Gb/s h2g: 10.56Gb/s After ----- g2h: 21.04Gb/s h2g: 10.76Gb/s Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16net/sched: sch_taprio: fix possible use-after-freeEric Dumazet
syzbot reported a nasty crash [1] in net_tx_action() which made little sense until we got a repro. This repro installs a taprio qdisc, but providing an invalid TCA_RATE attribute. qdisc_create() has to destroy the just initialized taprio qdisc, and taprio_destroy() is called. However, the hrtimer used by taprio had already fired, therefore advance_sched() called __netif_schedule(). Then net_tx_action was trying to use a destroyed qdisc. We can not undo the __netif_schedule(), so we must wait until one cpu serviced the qdisc before we can proceed. Many thanks to Alexander Potapenko for his help. [1] BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline] BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] do_raw_spin_trylock include/linux/spinlock.h:191 [inline] __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 spin_trylock include/linux/spinlock.h:359 [inline] qdisc_run_begin include/net/sch_generic.h:187 [inline] qdisc_run+0xee/0x540 include/net/pkt_sched.h:125 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164 kthread+0x31b/0x430 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Uninit was created at: slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3258 [inline] __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430 alloc_skb include/linux/skbuff.h:1257 [inline] nlmsg_new include/net/netlink.h:953 [inline] netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536 __sys_sendmsg net/socket.c:2565 [inline] __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-13 (ixgbe) This series contains updates to ixgbe driver only. Jesse resolves warning for RCU pointer by no longer restoring old pointer. Sebastian adds waiting for updating of link info on devices utilizing crosstalk fix to avoid false link state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16regmap: Rework regmap_mdio_c45_{read|write} for new C45 API.Andrew Lunn
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also encoding associated encoding of the C45 device address and register address into one value. regmap-mdio also uses this encoding for the C45 bus. Move to the new C45 helpers for MDIO access and provide regmap-mdio helper macros. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-16wifi: brcmfmac: ensure CLM version is null-terminated to prevent ↵Jisoo Jang
stack-out-of-bounds Fix a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with a CLM version string by memcpy() in brcmf_fil_iovar_data_get(). Ensure buf is null-terminated. Found by a modified version of syzkaller. [ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22 [ 33.021554][ T1896] ================================================================== [ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110 [ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896 [ 33.023852][ T1896] [ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 [ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event [ 33.026581][ T1896] Call Trace: [ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d [ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334 [ 33.028037][ T1896] ? strreplace+0xf2/0x110 [ 33.028403][ T1896] ? strreplace+0xf2/0x110 [ 33.028807][ T1896] kasan_report.cold+0x83/0xdf [ 33.029283][ T1896] ? strreplace+0xf2/0x110 [ 33.029666][ T1896] strreplace+0xf2/0x110 [ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40 [ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0 [ 33.032091][ T1896] ? find_held_lock+0x2d/0x110 [ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260 [ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 33.033582][ T1896] brcmf_attach+0x246/0xd40 [ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50 [ 33.034383][ T1896] ? kmemdup+0x30/0x40 [ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690 [ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 33.035833][ T1896] usb_probe_interface+0x25f/0x710 [ 33.036315][ T1896] really_probe+0x1be/0xa90 [ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0 [ 33.037383][ T1896] driver_probe_device+0x49/0x120 [ 33.037790][ T1896] __device_attach_driver+0x18a/0x250 [ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.042330][ T1896] __device_attach+0x207/0x330 [ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.043515][ T1896] bus_probe_device+0x1a2/0x260 [ 33.043914][ T1896] device_add+0xa61/0x1ce0 [ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660 [ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.045531][ T1896] usb_set_configuration+0x984/0x1770 [ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230 [ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90 [ 33.046931][ T1896] usb_probe_device+0x9c/0x220 [ 33.047434][ T1896] really_probe+0x1be/0xa90 [ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.048134][ T1896] driver_probe_device+0x49/0x120 [ 33.048516][ T1896] __device_attach_driver+0x18a/0x250 [ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.050936][ T1896] __device_attach+0x207/0x330 [ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.052314][ T1896] bus_probe_device+0x1a2/0x260 [ 33.052688][ T1896] device_add+0xa61/0x1ce0 [ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66 [ 33.053953][ T1896] ? hub_disconnect+0x400/0x400 [ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.055094][ T1896] hub_event+0x10d5/0x3330 [ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280 [ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790 [ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0 [ 33.056924][ T1896] ? lock_release+0x640/0x640 [ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.059019][ T1896] process_one_work+0x873/0x13e0 [ 33.059488][ T1896] ? lock_release+0x640/0x640 [ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320 [ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.060898][ T1896] worker_thread+0x8b/0xd10 [ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0 [ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0 [ 33.062288][ T1896] kthread+0x379/0x450 [ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30 [ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100 [ 33.063606][ T1896] ret_from_fork+0x1f/0x30 [ 33.064070][ T1896] [ 33.064313][ T1896] [ 33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame: [ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40 [ 33.065973][ T1896] [ 33.066191][ T1896] this frame has 4 objects: [ 33.066614][ T1896] [48, 56) 'ptr' [ 33.066618][ T1896] [80, 148) 'revinfo' [ 33.066957][ T1896] [192, 210) 'eventmask' [ 33.067338][ T1896] [256, 512) 'buf' [ 33.067742][ T1896] [ 33.068304][ T1896] Memory state around the buggy address: [ 33.068838][ T1896] ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 33.069545][ T1896] ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 33.072052][ T1896] ^ [ 33.073043][ T1896] ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074230][ T1896] ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074914][ T1896] ================================================================== [ 33.075713][ T1896] Disabling lock debugging due to kernel taint Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr
2023-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pable Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Increase timeout to 120 seconds for netfilter selftests to fix nftables transaction tests, from Florian Westphal. 2) Fix overflow in bitmap_ip_create() due to integer arithmetics in a 64-bit bitmask, from Gavrilov Ilia. 3) Fix incorrect arithmetics in nft_payload with double-tagged vlan matching. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16net: stmmac: Fix queue statistics readingKurt Kanzenbach
Correct queue statistics reading. All queue statistics are stored as unsigned long values. The retrieval for ethtool fetches these values as u64. However, on some systems the size of the counters are 32 bit. That yields wrong queue statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by using the correct data type. Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short period of time: Non-patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 3775276254951 # ??? | q0_tx_irq_n: 879 | q0_rx_pkt_n: 1194000908909 # ??? | q0_rx_irq_n: 278 Patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 2434 | q0_tx_irq_n: 1274 | q0_rx_pkt_n: 1604 | q0_rx_irq_n: 846 Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16pinctrl: rockchip: fix reading pull type on rk3568Jonas Karlman
When reading pinconf-pins from debugfs it fails to get the configured pull type on RK3568, "unsupported pinctrl type" error messages is also reported. Fix this by adding support for RK3568 in rockchip_get_pull, including a reverse of the pull-up value swap applied in rockchip_set_pull so that pull-up is correctly reported in pinconf-pins. Also update the workaround comment to reflect affected pins, GPIO0_D3-D6. Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-16wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oidSzymon Heidrich
Since resplen and respoffs are signed integers sufficiently large values of unsigned int len and offset members of RNDIS response will result in negative values of prior variables. This may be utilized to bypass implemented security checks to either extract memory contents by manipulating offset or overflow the data buffer via memcpy by manipulating both offset and len. Additionally assure that sum of resplen and respoffs does not overflow so buffer boundaries are kept. Fixes: 80f8c5b434f9 ("rndis_wlan: copy only useful data from rndis_command respond") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com
2023-01-16wifi: brcmfmac: fix regression for Broadcom PCIe wifi devicesArend van Spriel
A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only deviceArend van Spriel
When dealing with a device for 2GHz band only the wiphy->bands for 5GHz will be NULL. This would result in a NULL-deref in the brcmf_cfg80211_dump_survey() function. Rework the code with a for-loop to make it easier to add another band. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-3-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid handling disabled channels for survey dumpArend van Spriel
An issue was reported in which periodically error messages are printed in the kernel log: [ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2 [ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing [ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 27.076829] Bluetooth: hci0: BCM: features 0x2f [ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ [ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 [ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 30.590017] Bluetooth: MGMT ver 1.22 [ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52 [ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52 [ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52 [ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52 [ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52 [ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52 [ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52 [ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52 [ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52 [ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52 This happens in brcmf_cfg80211_dump_survey() because we try a disabled channel. When channel is marked as disabled we do not need to fill any other info so bail out. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-2-arend.vanspriel@broadcom.com
2023-01-16unix: Improve locking scheme in unix_show_fdinfo()Kirill Tkhai
After switching to TCP_ESTABLISHED or TCP_LISTEN sk_state, alive SOCK_STREAM and SOCK_SEQPACKET sockets can't change it anymore (since commit 3ff8bff704f4 "unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()"). Thus, we do not need to take lock here. Signed-off-by: Kirill Tkhai <tkhai@ya.ru> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16Merge branch 'virtio-net-xdp-multi-buffer'David S. Miller
Heng Qi says: ==================== virtio-net: support multi buffer xdp Changes since PATCH v4: - Make netdev_warn() in [PATCH 2/10] independent from [PATCH 3/10]. Changes since PATCH v3: - Separate fix patch [2/10] for MTU calculation of single buffer xdp. Note that this patch needs to be backported to the stable branch. Changes since PATCH v2: - Even if single buffer xdp has a hole mechanism, there will be no problem (limiting mtu and turning off GUEST GSO), so there is no need to backport "[PATCH 1/9]"; - Modify calculation of MTU for single buffer xdp in virtnet_xdp_set(); - Make truesize in mergeable mode return to literal meaning; - Add some comments for legibility; Changes since RFC: - Using headroom instead of vi->xdp_enabled to avoid re-reading in add_recvbuf_mergeable(); - Disable GRO_HW and keep linearization for single buffer xdp; - Renamed to virtnet_build_xdp_buff_mrg(); - pr_debug() to netdev_dbg(); - Adjusted the order of the patch series. Currently, virtio net only supports xdp for single-buffer packets or linearized multi-buffer packets. This patchset supports xdp for multi-buffer packets, then larger MTU can be used if xdp sets the xdp.frags. This does not affect single buffer handling. In order to build multi-buffer xdp neatly, we integrated the code into virtnet_build_xdp_buff_mrg() for xdp. The first buffer is used for prepared xdp buff, and the rest of the buffers are added to its skb_shared_info structure. This structure can also be conveniently converted during XDP_PASS to get the corresponding skb. Since virtio net uses comp pages, and bpf_xdp_frags_increase_tail() is based on the assumption of the page pool, (rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag)) is negative in most cases. So we didn't set xdp_rxq->frag_size in virtnet_open() to disable the tail increase. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: support multi-buffer xdpHeng Qi
Driver can pass the skb to stack by build_skb_from_xdp_buff(). Driver forwards multi-buffer packets using the send queue when XDP_TX and XDP_REDIRECT, and clears the reference of multi pages when XDP_DROP. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: remove xdp related info from page_to_skb()Heng Qi
For the clear construction of xdp_buff, we remove the xdp processing interleaved with page_to_skb(). Now, the logic of xdp and building skb from xdp are separate and independent. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: build skb from multi-buffer xdpHeng Qi
This converts the xdp_buff directly to a skb, including multi-buffer and single buffer xdp. We'll isolate the construction of skb based on xdp from page_to_skb(). Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: transmit the multi-buffer xdpHeng Qi
This serves as the basis for XDP_TX and XDP_REDIRECT to send a multi-buffer xdp_frame. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: construct multi-buffer xdp in mergeableHeng Qi
Build multi-buffer xdp using virtnet_build_xdp_buff_mrg(). For the prefilled buffer before xdp is set, we will probably use vq reset in the future. At the same time, virtio net currently uses comp pages, and bpf_xdp_frags_increase_tail() needs to calculate the tailroom of the last frag, which will involve the offset of the corresponding page and cause a negative value, so we disable tail increase by not setting xdp_rxq->frag_size. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: build xdp_buff with multi buffersHeng Qi
Support xdp for multi buffer packets in mergeable mode. Putting the first buffer as the linear part for xdp_buff, and the rest of the buffers as non-linear fragments to struct skb_shared_info in the tailroom belonging to xdp_buff. Let 'truesize' return to its literal meaning, that is, when xdp is set, it includes the length of headroom and tailroom. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: update bytes calculation for xdp_frameHeng Qi
Update relative record value for xdp_frame as basis for multi-buffer xdp transmission. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: set up xdp for multi buffer packetsHeng Qi
When the xdp program sets xdp.frags, which means it can process multi-buffer packets over larger MTU, so we continue to support xdp. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: fix calculation of MTU for single-buffer xdpHeng Qi
When single-buffer xdp is loaded, the size of the buffer filled each time is 'sz = (PAGE_SIZE - headroom - tailroom)', which is the maximum packet length that the driver allows the device to pass in. Otherwise, the packet with a length greater than sz will come in, so num_buf will be greater than or equal to 2, and xdp_linearize_page() will be performed and the packet will be dropped because the total length is greater than PAGE_SIZE. So the maximum value of MTU for single-buffer xdp is 'max_sz = sz - ETH_HLEN'. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16virtio-net: disable the hole mechanism for xdpHeng Qi
XDP core assumes that the frame_size of xdp_buff and the length of the frag are PAGE_SIZE. The hole may cause the processing of xdp to fail, so we disable the hole mechanism when xdp is set. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16scripts: support GNU make 4.4 in jobserver-execMartin Liska
Starting with GNU make 4.4, --jobserver-auth newly uses named pipe (fifo) instead of part of opened file descriptors: https://www.gnu.org/software/make/manual/html_node/POSIX-Jobserver.html Support also the new format. Signed-off-by: Martin Liska <mliska@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-16octeontx2-af: update CPT inbound inline IPsec config mailboxSrujana Challa
Updates CPT inbound inline IPsec configure mailbox to take CPT credit, opcode, credit_th and bpid from VF. This patch also adds a mailbox to read inbound IPsec configuration. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16Merge tag 'riscv-dt-fixes-for-v6.2-rc4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V DeviceTrees for v6.2 SiFive: A solitary fix for the PCI memory regions on the unmatched, triggered by an SM768. No-one must have tried one until just recently! Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: sifive: fu740: fix size of pcie 32bit memory Link: https://lore.kernel.org/r/Y78rn+0fVNOxHLKt@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16Merge tag 'mvebu-fixes-6.2-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 6.2 (part 1) Fix regression for gpio support on Armada 38x and Armada 38x Fix address for UART1 on AC5/AC5X * tag 'mvebu-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: AC5/AC5X: Fix address for UART1 Revert "ARM: dts: armada-39x: Fix compatible string for gpios" Revert "ARM: dts: armada-38x: Fix compatible string for gpios" Link: https://lore.kernel.org/r/87mt6mg08k.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16gpio: mxc: Always set GPIOs used as interrupt source to INPUT modeMarek Vasut
Always configure GPIO pins which are used as interrupt source as INPUTs. In case the default pin configuration is OUTPUT, or the prior stage does configure the pins as OUTPUT, then Linux will not reconfigure the pin as INPUT and no interrupts are received. Always configure the interrupt source GPIO pin as input to fix the above case. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlockMarek Vasut
The driver currently performs register read-modify-write without locking in its irqchip part, this could lead to a race condition when configuring interrupt mode setting. Add the missing bgpio spinlock lock/unlock around the register read-modify-write. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency ↵Yair Podemsky
invariance readings Once disable_freq_invariance_work is called the scale_freq_tick function will not compute or update the arch_freq_scale values. However the scheduler will still read these values and use them. The result is that the scheduler might perform unfair decisions based on stale values. This patch adds the step of setting the arch_freq_scale values for all cpus to the default (max) value SCHED_CAPACITY_SCALE, Once all cpus have the same arch_freq_scale value the scaling is meaningless. Signed-off-by: Yair Podemsky <ypodemsk@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230110160206.75912-1-ypodemsk@redhat.com
2023-01-16sched/core: Fix NULL pointer access fault in sched_setaffinity() with ↵Waiman Long
non-SMP configs The kernel commit 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") introduces a bug for kernels built with non-SMP configs. Calling sched_setaffinity() on such a uniprocessor kernel will cause cpumask_copy() to be called with a NULL pointer leading to general protection fault. This is not really a problem in real use cases as there aren't that many uniprocessor kernel configs in use and calling sched_setaffinity() on such a uniprocessor system doesn't make sense. Fix this problem by making sure cpumask_copy() will not be called in such a case. Fixes: 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") Reported-by: kernel test robot <yujie.liu@intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230115193122.563036-1-longman@redhat.com
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-15block, bfq: switch 'bfqg->ref' to use atomic refcount apisYu Kuai
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however, during code review, we found that bfq_pd_free() update 'bfqg->ref' without holding the lock, which is problematic: 1) bfq_pd_free() triggered by removing cgroup is called asynchronously; 2) bfqq will grab bfqg reference, and exit bfqq will drop the reference, which can concurrent with 1). Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-16rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocksMiguel Ojeda
At the moment it is possible to perform unsafe operations in the arguments of `pr_*` macros since they are evaluated inside an `unsafe` block: let x = &10u32 as *const u32; pr_info!("{}", *x); In other words, this is a soundness issue. Fix it so that it requires an explicit `unsafe` block. Reported-by: Wedson Almeida Filho <wedsonaf@gmail.com> Reported-by: Domen Puncer Kugler <domen.puncerkugler@nccgroup.com> Link: https://github.com/Rust-for-Linux/linux/issues/479 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
2023-01-16zonefs: Detect append writes at invalid locationsDamien Le Moal
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential files succeeds regardless of the zone write pointer position, as long as the target zone is not full. This means that if an external (buggy) application writes to the zone of a sequential file underneath the file system, subsequent file write() operation will succeed but the file size will not be correct and the file will contain invalid data written by another application. Modify zonefs_file_dio_append() to check the written sector of an append write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a mismatch with the file zone wp offset field. This change triggers a call to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to not expose the unexpected data after the current inode size when the errors=remount-ro mode is used. Other error modes are correctly handled already. Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
2023-01-15Merge branch 'samples/bpf: modernize BPF functionality test programs'Alexei Starovoitov
"Daniel T. Lee" says: ==================== Currently, there are many programs under samples/bpf to test the various functionality of BPF that have been developed for a long time. However, the kernel (BPF) has changed a lot compared to the 2016 when some of these test programs were first introduced. Therefore, some of these programs use the deprecated function of BPF, and some programs no longer work normally due to changes in the API. To list some of the kernel changes that this patch set is focusing on, - legacy BPF map declaration syntax support had been dropped [1] - bpf_trace_printk() always append newline at the end [2] - deprecated styled BPF section header (bpf_load style) [3] - urandom_read tracepoint is removed (used for testing overhead) [4] - ping sends packet with SOCK_DGRAM instead of SOCK_RAW [5]* - use "vmlinux.h" instead of including individual headers In addition to this, this patchset tries to modernize the existing testing scripts a bit. And for network-related testing programs, a separate header file was created and applied. (To use the Endianness conversion function from xdp_sample and bunch of constants) [1]: https://github.com/libbpf/libbpf/issues/282 [2]: commit ac5a72ea5c89 ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") [3]: commit ceb5dea56543 ("samples: bpf: Remove bpf_load loader completely") [4]: commit 14c174633f34 ("random: remove unused tracepoints") [5]: https://lwn.net/Articles/422330/ *: This is quite old, but I'm not sure why the code was initially developed to filter only SOCK_RAW. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: change _kern suffix to .bpf with BPF test programsDaniel T. Lee
This commit changes the _kern suffix to .bpf with the BPF test programs. With this modification, test programs will inherit the benefit of the new CLANG-BPF compile target. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-11-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: use vmlinux.h instead of implicit headers in BPF test programDaniel T. Lee
This commit applies vmlinux.h to BPF functionality testing program. Macros that were not defined despite migration to "vmlinux.h" were defined separately in individual files. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-10-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace BPF programs header with net_shared.hDaniel T. Lee
This commit applies "net_shared.h" to BPF programs to remove existing network related header dependencies. Also, this commit removes unnecessary headers before applying "vmlinux.h" to the BPF programs. Mostly, endianness conversion function has been applied to the source. In addition, several macros have been defined to fulfill the INET, TC-related constants. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-9-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: split common macros to net_shared.hDaniel T. Lee
Currently, many programs under sample/bpf often include individual macros by directly including the header under "linux/" rather than using the "vmlinux.h" header. However, there are some problems with migrating to "vmlinux.h" because there is no definition for utility functions such as endianness conversion (ntohs/htons). Fortunately, the xdp_sample program already has a function that can be replaced to solve this problem. Therefore, this commit attempts to separate these functions into a file called net_shared.h to make them universally available. Additionally, this file includes network-related macros that are not defined in "vmlinux.h". (inspired by 'selftests' bpf_tracing_net.h) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-8-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace legacy map with the BTF-defined mapDaniel T. Lee
With libbpf 1.0 release, support for legacy BPF map declaration syntax had been dropped. If you run a program using legacy BPF in the latest libbpf, the following error will be output. libbpf: map 'lwt_len_hist_map' (legacy): legacy map definitions are deprecated, use BTF-defined maps instead libbpf: Use of BPF_ANNOTATE_KV_PAIR is deprecated, use BTF-defined maps in .maps section instead This commit replaces legacy map with the BTF-defined map. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-7-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace broken overhead microbenchmark with fib_table_lookupDaniel T. Lee
The test_overhead bpf program is designed to compare performance between tracepoint and kprobe. Initially it used task_rename and urandom_read tracepoint. However, commit 14c174633f34 ("random: remove unused tracepoints") removed urandom_read tracepoint, and for this reason the test_overhead got broken. This commit introduces new microbenchmark using fib_table_lookup. This microbenchmark sends UDP packets to localhost in order to invoke fib_table_lookup. In a nutshell: fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); addr.sin_addr.s_addr = inet_addr(DUMMY_IP); addr.sin_port = htons(DUMMY_PORT); for() { sendto(fd, buf, strlen(buf), 0, (struct sockaddr *)&addr, sizeof(addr)); } on 4 cpus in parallel: lookup per sec base (no tracepoints, no kprobes) 381k with kprobe at fib_table_lookup() 325k with tracepoint at fib:fib_table_lookup 330k with raw_tracepoint at fib:fib_table_lookup 365k Fixes: 14c174633f34 ("random: remove unused tracepoints") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-6-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: fix broken cgroup socket testingDaniel T. Lee
Currently, executing test_cgrp2_sock2 fails due to wrong section header. This 'cgroup/sock1' style section is previously used at 'samples/bpf_load' (deprecated) BPF loader. Because this style isn't supported in libbpf, this commit fixes this problem by correcting the section header. $ sudo ./test_cgrp2_sock2.sh libbpf: prog 'bpf_prog1': missing BPF prog type, check ELF section name 'cgroup/sock1' libbpf: prog 'bpf_prog1': failed to load: -22 libbpf: failed to load object './sock_flags_kern.o' ERROR: loading BPF object file failed In addition, this BPF program filters ping packets by comparing whether the socket type uses SOCK_RAW. However, after the ICMP socket[1] was developed, ping sends ICMP packets using SOCK_DGRAM. Therefore, in this commit, the packet filtering is changed to use SOCK_DGRAM instead of SOCK_RAW. $ strace --trace socket ping -6 -c1 -w1 ::1 socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = 3 [1]: https://lwn.net/Articles/422330/ Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-5-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: fix broken lightweight tunnel testingDaniel T. Lee
The test_lwt_bpf is a script that tests the functionality of BPF through the output of the ftrace with bpf_trace_printk. Currently, this program is not operating normally for several reasons. First of all, this test script can't parse the ftrace results properly. GNU sed tries to be as greedy as possible when attempting pattern matching. Due to this, cutting metadata (such as timestamp) from the log entry of ftrace doesn't work properly, and also desired log isn't extracted properly. To make sed stripping clearer, 'nocontext-info' option with the ftrace has been used to remove metadata from the log. Also, instead of using unclear pattern matching, this commit specifies an explicit parse pattern. Also, unlike before when this test was introduced, the way bpf_trace_printk behaves has changed[1]. The previous bpf_trace_printk had to always have '\n' in order to print newline, but now that the bpf_trace_printk call includes newline by default, so '\n' is no longer needed. Lastly with the lwt ENCAP_BPF out, the context information with the sk_buff protocol is preserved. Therefore, this commit changes the previous test result from 'protocol 0' to 'protocol 8', which means ETH_P_IP. [1]: commit ac5a72ea5c89 ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-4-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 11:12:45 +0000