summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-22net: dsa: Fix functional dsa-loop dependency on FIXED_PHYFlorian Fainelli
We have a functional dependency on the FIXED_PHY MDIO bus because we register fixed PHY devices "the old way" which only works if the code that does this has had a chance to run before the fixed MDIO bus is probed. Make sure we account for that and have dsa_loop_bdinfo.o be either built-in or modular depending on whether CONFIG_FIXED_PHY reflects that too. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'hv_netvsc-fix-races-during-shutdown-and-changes'David S. Miller
Stephen Hemminger says: ==================== hv_netvsc: fix races during shutdown and changes This set of patches fixes issues identified by Vitaly Kuznetsov and Mohammed Gamal related to state changes in Hyper-v network driver. A lot of the issues are because setting up the netvsc device requires a second step (in work queue) to get all the sub-channels running. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: common detach logicStephen Hemminger
Make common function for detaching internals of device during changes to MTU and RSS. Make sure no more packets are transmitted and all packets have been received before doing device teardown. Change the wait logic to be common and use usleep_range(). Changes transmit enabling logic so that transmit queues are disabled during the period when lower device is being changed. And enabled only after sub channels are setup. This avoids issue where it could be that a packet was being sent while subchannel was not initialized. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: change GPAD teardown order on older versionsStephen Hemminger
On older versions of Windows, the host ignores messages after vmbus channel is closed. Workaround this by doing what Windows does and send the teardown before close on older versions of NVSP protocol. Reported-by: Mohammed Gamal <mgamal@redhat.com> Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: use RCU to fix concurrent rx and queue changesStephen Hemminger
The receive processing may continue to happen while the internal network device state is in RCU grace period. The internal RNDIS structure is associated with the internal netvsc_device structure; both have the same RCU lifetime. Defer freeing all associated parts until after grace period. Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: disable NAPI before channel closeStephen Hemminger
This makes sure that no CPU is still process packets when the channel is closed. Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net/ipv6: Handle onlink flag with multipath routesDavid Ahern
For multipath routes the ONLINK flag can be specified per nexthop in rtnh_flags or globally in rtm_flags. Update ip6_route_multipath_add to consider the ONLINK setting coming from rtnh_flags. Each loop over nexthops the config for the sibling route is initialized to the global config and then per nexthop settings overlayed. The flag is 'or'ed into fib6_config to handle the ONLINK flag coming from either rtm_flags or rtnh_flags. Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ppp: avoid loop in xmit recursion detection codeGuillaume Nault
We already detect situations where a PPP channel sends packets back to its upper PPP device. While this is enough to avoid deadlocking on xmit locks, this doesn't prevent packets from looping between the channel and the unit. The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq before checking for xmit recursion. Therefore, __ppp_xmit_process() might dequeue a packet from ppp->file.xq and send it on the channel which, in turn, loops it back on the unit. Then ppp_start_xmit() queues the packet back to ppp->file.xq and __ppp_xmit_process() picks it up and sends it again through the channel. Therefore, the packet will loop between __ppp_xmit_process() and ppp_start_xmit() until some other part of the xmit path drops it. For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops the packet after a few iterations. But PPTP reallocates the headroom if necessary, letting the loop run and exhaust the machine resources (as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109). Fix this by letting __ppp_xmit_process() enqueue the skb to ppp->file.xq, so that we can check for recursion before adding it to the queue. Now ppp_xmit_process() can drop the packet when recursion is detected. __ppp_channel_push() is a bit special. It calls __ppp_xmit_process() without having any actual packet to send. This is used by ppp_output_wakeup() to re-enable transmission on the parent unit (for implementations like ppp_async.c, where the .start_xmit() function might not consume the skb, leaving it in ppp->xmit_pending and disabling transmission). Therefore, __ppp_xmit_process() needs to handle the case where skb is NULL, dequeuing as many packets as possible from ppp->file.xq. Reported-by: xu heng <xuheng333@zoho.com> Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ipv6: sr: fix NULL pointer dereference when setting encap source addressDavid Lebrun
When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the source address of the outer IPv6 header, in case none was specified. Using skb->dev can lead to BUG() when it is in an inconsistent state. This patch uses the net_device attached to the skb's dst instead. [940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c [940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0 [940807.815725] PGD 0 P4D 0 [940807.847173] Oops: 0000 [#1] SMP PTI [940807.890073] Modules linked in: [940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W 4.16.0-rc1-seg6bpf+ #2 [940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26 09/06/2010 [940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0 [940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206 [940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe [940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500 [940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff [940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850 [940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002 [940808.684675] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [940808.783036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0 [940808.939634] Call Trace: [940808.970041] <IRQ> [940808.995250] ? ip6t_do_table+0x265/0x640 [940809.043341] seg6_do_srh_encap+0x28f/0x300 [940809.093516] ? seg6_do_srh+0x1a0/0x210 [940809.139528] seg6_do_srh+0x1a0/0x210 [940809.183462] seg6_output+0x28/0x1e0 [940809.226358] lwtunnel_output+0x3f/0x70 [940809.272370] ip6_xmit+0x2b8/0x530 [940809.313185] ? ac6_proc_exit+0x20/0x20 [940809.359197] inet6_csk_xmit+0x7d/0xc0 [940809.404173] tcp_transmit_skb+0x548/0x9a0 [940809.453304] __tcp_retransmit_skb+0x1a8/0x7a0 [940809.506603] ? ip6_default_advmss+0x40/0x40 [940809.557824] ? tcp_current_mss+0x24/0x90 [940809.605925] tcp_retransmit_skb+0xd/0x80 [940809.654016] tcp_xmit_retransmit_queue.part.17+0xf9/0x210 [940809.719797] tcp_ack+0xa47/0x1110 [940809.760612] tcp_rcv_established+0x13c/0x570 [940809.812865] tcp_v6_do_rcv+0x151/0x3d0 [940809.858879] tcp_v6_rcv+0xa5c/0xb10 [940809.901770] ? seg6_output+0xdd/0x1e0 [940809.946745] ip6_input_finish+0xbb/0x460 [940809.994837] ip6_input+0x74/0x80 [940810.034612] ? ip6_rcv_finish+0xb0/0xb0 [940810.081663] ipv6_rcv+0x31c/0x4c0 ... Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel stateDavid Lebrun
The seg6_build_state() function is called with RCU read lock held, so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead. [ 92.770271] ============================= [ 92.770628] WARNING: suspicious RCU usage [ 92.770921] 4.16.0-rc4+ #12 Not tainted [ 92.771277] ----------------------------- [ 92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 92.772279] [ 92.772279] other info that might help us debug this: [ 92.772279] [ 92.773067] [ 92.773067] rcu_scheduler_active = 2, debug_locks = 1 [ 92.773514] 2 locks held by ip/2413: [ 92.773765] #0: (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0 [ 92.774377] #1: (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210 [ 92.775065] [ 92.775065] stack backtrace: [ 92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12 [ 92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 [ 92.776608] Call Trace: [ 92.776852] dump_stack+0x7d/0xbc [ 92.777130] __schedule+0x133/0xf00 [ 92.777393] ? unwind_get_return_address_ptr+0x50/0x50 [ 92.777783] ? __sched_text_start+0x8/0x8 [ 92.778073] ? rcu_is_watching+0x19/0x30 [ 92.778383] ? kernel_text_address+0x49/0x60 [ 92.778800] ? __kernel_text_address+0x9/0x30 [ 92.779241] ? unwind_get_return_address+0x29/0x40 [ 92.779727] ? pcpu_alloc+0x102/0x8f0 [ 92.780101] _cond_resched+0x23/0x50 [ 92.780459] __mutex_lock+0xbd/0xad0 [ 92.780818] ? pcpu_alloc+0x102/0x8f0 [ 92.781194] ? seg6_build_state+0x11d/0x240 [ 92.781611] ? save_stack+0x9b/0xb0 [ 92.781965] ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0 [ 92.782480] ? seg6_build_state+0x11d/0x240 [ 92.782925] ? lwtunnel_build_state+0x1bd/0x210 [ 92.783393] ? ip6_route_info_create+0x687/0x1640 [ 92.783846] ? ip6_route_add+0x74/0x110 [ 92.784236] ? inet6_rtm_newroute+0x8a/0xd0 Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'aquantia-fixes'David S. Miller
Igor Russkikh says: ==================== Aquantia atlantic hot fixes 03-2018 This is a set of atlantic driver hot fixes for various areas: Some issues with hardware reset covered, Fixed napi_poll flood happening on some traffic conditions, Allow system to change MAC address on live device, Add pci shutdown handler. patch v2: - reverse christmas tree - remove driver private parameter, replacing it with define. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: driver version bumpIgor Russkikh
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Implement pci shutdown callbackIgor Russkikh
We should close link and all NIC operations during shutdown. On some systems graceful reboot never closes NIC interface on its own, but only indicates pci device shutdown. Without explicit handler, NIC rx rings continued to transfer DMA data into prepared buffers while CPU rebooted already. That caused memory corruptions on soft reboot. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Allow live mac address changesIgor Russkikh
There is nothing prevents us from changing MAC on the running interface. Allow this with ndev priv flag. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh
We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Change inefficient wait loop on fw data readsIgor Russkikh
B1 hardware changes behavior of mailbox interface, it has busy bit always raised. Data ready condition should be detected by increment of address register. Old code has empty `for` loop, and that caused cpu overloads on B1 hardware. aq_nic_service_timer_cb consumed ~100ms because of that. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix a regression with reset on old firmwareIgor Russkikh
FW 1.5.58 and below needs a fixed delay even after 0x18 register is filled. Otherwise, setting MPI_INIT state too fast causes traffic hang. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix hardware reset when SPI may rarely hangupIgor Russkikh
Under some circumstances (notably using thunderbolt interface) SPI on chip reset may be in active transaction. Here we forcibly cleanup SPI to prevent possible hangups. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-03-20 Please apply one final set of qeth patches for 4.16. All of these fix long-standing bugs, so please queue them up for -stable as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: on channel error, reject further cmd requestsJulian Wiedmann
When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: lock read device while queueing next bufferJulian Wiedmann
For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: when thread completes, wake up all waitersJulian Wiedmann
qeth_wait_for_threads() is potentially called by multiple users, make sure to notify all of them after qeth_clear_thread_running_bit() adjusted the thread_running_mask. With no timeout, callers would otherwise stall. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: free netdevice when removing a cardJulian Wiedmann
On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'net-phy-Add-general-dummy-stubs-for-MMD-register-access'David S. Miller
Kevin Hao says: ==================== net: phy: Add general dummy stubs for MMD register access v2: As suggested by Andrew: - Add general dummy stubs - Also use that for the micrel phy This patch series fix the Ethernet broken on the mpc8315erdb board introduced by commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: micrel: Use the general dummy stubs for MMD register accessKevin Hao
The new general dummy stubs for MMD register access were introduced. Use that for the codes reuse. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211bKevin Hao
The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: Add general dummy stubs for MMD register accessKevin Hao
For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge tag 'batadv-net-for-davem-20180319' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix possible IPv6 packet loss when multicast extension is used, by Linus Luessing - fix SKB handling issues for TTVN and DAT, by Matthias Schiffer (two patches) - fix include for eventpoll, by Sven Eckelmann - fix skb checksum for ttvn reroutes, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22posix-timers: Protect posix clock array access against speculationThomas Gleixner
The clockid argument of clockid_to_kclock() comes straight from user space via various syscalls and is used as index into the posix_clocks array. Protect it against spectre v1 array out of bounds speculation. Remove the redundant check for !posix_clock[id] as this is another source for speculation and does not provide any advantage over the return posix_clock[id] path which returns NULL in that case anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de
2018-03-22drm/vmwgfx: Bump version patchlevel and dateThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: use monotonic event timestampsArnd Bergmann
DRM_VMW_EVENT_FENCE_SIGNALED (struct drm_vmw_event_fence) and DRM_EVENT_VBLANK (struct drm_event_vblank) pass timestamps in 32-bit seconds/microseconds format. As of commit c61eef726a78 ("drm: add support for monotonic vblank timestamps"), other DRM drivers use monotonic times for drm_event_vblank, but vmwgfx still uses CLOCK_REALTIME for both events, which suffers from the y2038/y2106 overflow as well as time jumps. For consistency, this changes vmwgfx to use ktime_get_ts64 as well, which solves those problems and avoids the deprecated do_gettimeofday() function. This should be transparent to to user space, as long as it doesn't compare the time against the result of gettimeofday(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Unpin the screen object backup buffer when not usedThomas Hellstrom
We were relying on the pinned screen object backup buffer to be destroyed when not used. But if we hold a copy of the atomic state, like when hibernating, the backup buffer might not be destroyed since it's refcounted by the atomic state. This causes us to hibernate with a buffer pinned in VRAM. Fix this by only having the buffer pinned when it is actually used by a screen object. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Stricter count of legacy surface device resourcesThomas Hellstrom
For legacy surfaces, they were previously registered as device resources when the driver resources were created. Since they are evictable we instead register them as device resources once they are created on the device, just like for guest-backed surfaces. This has implications during hibernation where we can't hibernate with device resources active. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Use kasprintfHimanshu Jha
Use kasprintf instead of combination of kmalloc and sprintf. Also, remove the local variables used for storing the string length as they are not required now. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Get rid of the device-private suspended memberThomas Hellstrom
It was used to early block fbdev dirty processing. Replace it with an unprotected check of the par->dirty.active field. While this might race with the vmw_fb_off() function, we do a protected check later so the race will at worst lead to grabbing and releasing a couple of locks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Improve on hibernationThomas Hellstrom
Make it possible to hibernate also with masters that don't switch VT at hibernation time. We save and restore modesetting state unless fbdev is active and enabled at hibernation time. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Avoid pinning fbdev framebuffersThomas Hellstrom
fbdev framebuffers were previously pinned to be able to keep them mapped across updates. This commit introduces a mechanism that instead revalidates the map on each update, keeping the map cached across updates. The cached map is torn down if the underlying pages change. Typically on buffer object moves and swapouts. This should be nicer to the system when we have resource contention. Testing done: Basic fbdev functionality under Fedora 27. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Fix multiple command buffer context useThomas Hellstrom
The start / stop and preempt commands don't honor the context argument but rather acts on all available contexts. Also add detection for context 1 availability. Note that currently there's no driver interface for submitting buffers using the high-priority command queue (context 1). Testing done: Change the default context for command submission to 1 instead of 0, verify basic desktop functionality including faulty command injection and recovery. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blitsThomas Hellstrom
This blit was previously performed using two large vmaps, one of which was teared down and remapped on each blit. Use the more resource- conserving TTM cpu blit instead. The blit is used in boundary-box computing mode which makes it possible to minimize the bounding box used in host operations. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bosThomas Hellstrom
The utility uses kmap_atomic() instead of vmapping the whole buffer object. As a result there will be more book-keeping but on some architectures this will help avoid exhausting vmalloc space and also avoid expensive TLB flushes. The blit utility also adds a provision to compute a bounding box of changed content, which is very useful to optimize presentation speed of ill-behaved applications that don't supply proper damage regions, and for page-flips. The cost of computing the bounding box is not that expensive when done in a cpu-blit utility like this. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/ttm: Export the ttm_k[un]map_atomic_prot API.Thomas Hellstrom
It will be used by vmwgfx cpu blit. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/ttm: Clean up kmap_atomic_prot selection codeThomas Hellstrom
Use helpers to perform the kmap_atomic_prot() functionality to a) Avoid in-function ifdefs that violate the kernel coding policy, b) Facilitate exporting the functionality. This commit should not change any functionality. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/etnaviv: bump HW job limit to 4Lucas Stach
The current limit of 2 leads to some GPU idle times, as the usual IRQ latency leads to up to 3 jobs getting signaled at once with some standard workloads. A larger HW job limit might lead to slightly worse QoS, but we accept that to not sacrifice GPU throughput in the common case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-03-22drm/vmwgfx: Cursor update fixesThomas Hellstrom
Use drm_plane_helper_check_update also for the cursor plane. Some applications, like gdm on gnome shell still uses cursor front-buffer like rendering without notifying the kernel. We do need some kind of noficiation, but work around this for now by updating the cursor image on every cursor move. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Send the correct nonblock option for atomic_commitDeepak Rawat
Page flip can be slow for vmwgfx in some cases, like need to do surface copy to different surface or waiting for IN_FENCE_FD. Enabling nonblocking commits for vmwgfx in case userspace request it. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move the stdu vblank event to atomic functionDeepak Rawat
Atomic ioctl can also send the same page flip flags as legacy ioctl. In those cases also need to send the vblank event to userspace. vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move screen object page flip to atomic functionDeepak Rawat
The dmabuf_dirty/surface_dirty in case of screen object is moved to plane atomic update, so that page flip in atomic ioctl also works. vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flushDeepak Rawat
The function drm_crtc_arm_vblank_event should be used for the driver which have vblank interrupt support. In case of vmwgfx we do not have vblank interrupt. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move surface copy cmd to atomic functionDeepak Rawat
When display surface is different than the framebuffer surface, atomic path do not copy the surface data. This commit moved the code to copy surface from legacy to atomic path. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Avoid iterating over display unit if crtc is availableDeepak Rawat
In case of page flip there is no need to iterate over all display unit in the function "vmw_kms_helper_dirty". If crtc is available then dirty commands is performed on that crtc only. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:39:14 +0000